inspector i   quality

Petrofac

<div>
 <strong>
  JOB TITLE:
 </strong>
 <strong>
  Inspector I - Quality (Electrical)
  <br/>
  <br/>
 </strong>
 <strong>
  Scope Of Responsibilities
  <br/>
  <br/>
 </strong>
 <strong>
  Responsible for monitoring and reporting compliance with project specifications, drawings, codes, standards and procedures of all fabrication, installation, erection and testing processes during construction leading to mechanical completion. Recommend methods to improve overall quality and assists in analyzing quality concerns. Supervise and coordinate Petrofac subordinate inspection personnel.
  <br/>
  <br/>
  Monitor, supervise and assist subcontractors to achieve the planned quality objectives.
  <br/>
  <br/>
 </strong>
 <strong>
  Primary Duties
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Witness inspection/test within their disciplines based on approved ITPs.
  </li>
  <li>
   Ensure installation and test procedure(s) are followed.
  </li>
  <li>
   Coordinate all site inspections with the site subcontractors.
  </li>
  <li>
   Assist discipline leader in forecasting Inspection/Test requirements of each tagged items
  </li>
  <li>
   Ensure that all inspection reports are accurate and that all attached documents are current status.
  </li>
  <li>
   Ensure all work is correctly prepared prior to any inspection being undertaken.
  </li>
  <li>
   Review all inspection reports for compliance.
  </li>
  <li>
   Liase with the site construction engineers and provide assistance when requested.
  </li>
  <li>
   Prepare non-conformance reports to the SQM and assist in developing corrective actions.
  </li>
  <li>
   Coordinate with the site subcontractors to ensure that communications exist and are maintained.
  </li>
  <li>
   Assist the site subcontractors in the resolution of drawing interpretation.
  </li>
  <li>
   Review work procedures and method statements for compliance with good work practices and the customers contract specializations.
  </li>
  <li>
   The issuance of non-conformance reports in conjunction with the SQM.
  </li>
  <li>
   The completion of QC site instructions and coordinate their closure The review of inspection test packages during the course of construction activities.
  </li>
  <li>
   Compliance with the site's health and safety regulations.
  </li>
  <li>
   Ensure installation in compliance with project specifications, drawings and applicable code requirements.
  </li>
  <li>
   Monitor performance of sub-contractors, ensure personnel are qualified and competent to perform allocated tasks, have valid certification, where required, for the techniques in use.
  </li>
  <li>
   Monitor calibration status and condition of Inspection/Test and Measuring instruments.
  </li>
  <li>
   Coordinate with construction supervisors for timely issue of RFI&rsquo;s as work progress.
  </li>
  <li>
   Reports inspection results and quality performance to related Discipline Leader on a daily basis.
  </li>
  <li>
   Ensure closure of all RFI&rsquo;s and related inspection/test records (ITRs) immediately after successful completion of each inspections.
  </li>
  <li>
   Report daily RFI and ITR closure status to discipline leader at the end of the each working day.
  </li>
  <li>
   Monitor completion of system/sub system in his area based on previously forecasted ITR&rsquo;s.
  </li>
  <li>
   Report back to discipline leader, if any refining required in ITR forecast based on actual site condition.
  </li>
  <li>
   Immediately report any cost effecting inspection results to discipline leader and also highlight to engineering.
  </li>
  <li>
   Perform Daily Surveillance at site and report findings to SQM. Participate in Quality Walkthroughs.
  </li>
  <li>
   Perform pre-acceptance survey of works and documentation prior to testing.
  </li>
  <li>
   Carry out any other duties as and when required by the discipline supervisor.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Functional Duties- Electrical
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Inspection/testing of temporary electrical works, connections to camp facilities as and when required.
  </li>
  <li>
   Inspect installation of supports prior to cable tray installation.
  </li>
  <li>
   Inspection of cable tray/conduit installation prior to release for cable laying.
  </li>
  <li>
   Inspect UG stub ups.
  </li>
  <li>
   Inspect cable trench for dimensions and sand bedding prior to cable laying and prior to release each layer of cables.
  </li>
  <li>
   Monitor cable jointing/termination process to ensure manufacturer&rsquo;s recommendations are followed.
  </li>
  <li>
   Inspect cable segregation arrangement etc prior to back filling/release.
  </li>
  <li>
   Inspect cable glanding ,termination, dressing etc.
  </li>
  <li>
   Witness Insulation Resistance/continuity test of cables on the drum, after laying, prior to trench back filling and after termination.
  </li>
  <li>
   Witness Hi-pot test of cables.
  </li>
  <li>
   Inspect/witness final torquing of the cable termination.
  </li>
  <li>
   Inspect installation of cable tray cover.
  </li>
  <li>
   Surveillance during installation of equipment at substation to ensure manufacturer&rsquo;s recommendations are followed.
  </li>
  <li>
   Monitor preservation activities of switch gears, transformers, bus ducts and other equipment.
  </li>
  <li>
   Inspection of switch gear installation for alignment, location etc.
  </li>
  <li>
   Witness torquing of bus bar joints and doctor test.
  </li>
  <li>
   Witness IR test of bus bar.
  </li>
  <li>
   Witness Hi-pot test of bus bar wherever applicable.
  </li>
  <li>
   Witness various testing of switchgears including IR, Hi-pot, ductor, operational etc.
  </li>
  <li>
   Witness Transformer oil dielectric test.
  </li>
  <li>
   Witness IR test of transformer.
  </li>
  <li>
   Witness various electrical tests as per applicable ITP/vendor docs.
  </li>
  <li>
   Final inspection of transformers, Switchgears, MCCs and other equipment&rsquo;s.
  </li>
  <li>
   Inspect installation of Bus duct.
  </li>
  <li>
   Witness torquing,ductor/IR test of bus duct.
  </li>
  <li>
   Inspect batteries, chargers and UPS. Where applicable, witness charging/discharging test of batteries.
  </li>
  <li>
   Inspect underground earth cable installation, cad weld joints etc prior to trench back filling.
  </li>
  <li>
   Inspect installation of earth electrode and earthing system.
  </li>
  <li>
   Witness earth resistance test of individual electrodes and earthing network.
  </li>
  <li>
   Witness earth loop resistance/continuity test.
  </li>
  <li>
   Inspection of lightning protection system of each building.
  </li>
  <li>
   Final inspection of earthing system.
  </li>
  <li>
   Inspect location of each lighting fixtures, socket out lets, junction boxes with respect to type/application.
  </li>
  <li>
   Inspect site routed lighting cable tray installation and release for cable laying.
  </li>
  <li>
   Inspect installation of distribution boards.
  </li>
  <li>
   Witness IR test of distribution boards.
  </li>
  <li>
   Witness IR/continuity test of lighting circuits.
  </li>
  <li>
   Witness functional test of each lighting circuits, where applicable only.
  </li>
  <li>
   Witness illumination level test, where applicable only.
  </li>
  <li>
   Monitor preservation activities of motors throughout project period.
  </li>
  <li>
   Inspect installation of motors including glanding termination,earthing.
  </li>
  <li>
   Witness IR test and /or polarization index test etc as applicable.
  </li>
  <li>
   Inspect installation of local control stations.
  </li>
  <li>
   Witness functional test from local control station to Substation, if applicable.
  </li>
  <li>
   Witness motor solo run test (2hrs for LV motors and 4 hrs for MV/HV motors), if applicable Inspect thermite welding on top of UG pipe and witness continuity test of cables.
  </li>
  <li>
   Inspect installation of temporary magnesium anode, reference electrode, anode ribbon, crossings.
  </li>
  <li>
   Witness various inspection/testing related to CP system prior to backfilling and after back filling.
  </li>
  <li>
   Inspect installation of CP transformer/rectifier.
  </li>
  <li>
   Inspect installation of heat tracing circuits and associated components.
  </li>
  <li>
   Witness testing of heat tracing circuits prior to insulation and after cladding.
  </li>
  <li>
   Witness inspection and tests related to equipment such as diesel generators, HVAC equipment etc.
  </li>
  <li>
   Witness inspection/testing related to overhead power distribution/transmission lines.
  </li>
  <li>
   Perform initial detailed inspection of certified electrical equipment based on latest IEC 60079-17 table 1,2,3 and IEC 60079-14, or perform visual or close inspection as applicable.
  </li>
  <li>
   Correct interpretation of equipment labels, IP Rating etc.
  </li>
  <li>
   Verify IP Rating is maintained.
   <br/>
   <br/>
  </li>
 </ul>
 Additional Information
 <br/>
 <br/>
</div>
<br /> <div id='job-id'>Job Id: 9MRVMocUoxC9djtUKJpEqdD26l/5p+C+db7VJlqtGadhFw5cettjtr8eBs++w9btKOVwe1dbnagk6PlHwmR6ZLjQukRQArM5bw==</div>

Inspector I - Quality

<div><p><b>Petrofac is a leading international service provider to the energy industry, with a diverse client portfolio including many of the world&rsquo;s leading energy companies.</b></p>
<p>
We design, build, manage and maintain infrastructure for our clients. We recruit, reward, and develop our people based on merit regardless of race, nationality, religion, gender, age, sexual orientation, marital status or disability. We value our people and treat everyone who works for or with Petrofac fairly and without discrimination.</p>
<p>
The world is re-thinking its energy supply and energy security needs; planning for a phased transition to alternative energy sources. We are here to help our clients meet these evolving energy needs.</p>
<p>
This is an exciting time to join us on this journey.</p>
<p>
We support flexible working requests and have adopted a hybrid approach for most of our office-based roles. We ask employees to be present in the office at least three days per week.</p>
<p><b><i>
Are you ready to bring the right energy to Petrofac and help us deliver a better future for everyone?</i></b></p>
<p></p>
<p><b>JOB TITLE: Inspector I &ndash; Quality (Electrical)</b></p>
<p></p>
<p><b>KEY RESPONSIBILITIES:</b></p>
<ul><li> Inspection/testing of temporary electrical works, connections to camp facilities as and when required.
</li></ul><ul><li> Inspect installation of supports prior to cable tray installation.
</li></ul><ul><li> Inspection of cable tray/conduit installation prior to release for cable laying.
</li></ul><ul><li> Inspect UG stub ups.
</li></ul><ul><li> Inspect cable trench for dimensions and sand bedding prior to cable laying and prior to release each layer of cables.
</li></ul><ul><li> Monitor cable jointing/termination process to ensure manufacturer&rsquo;s recommendations are followed.
</li></ul><ul><li> Inspect cable segregation arrangement etc prior to back filling/release.
</li></ul><ul><li> Inspect cable glanding ,termination, dressing etc.
</li></ul><ul><li> Witness Insulation Resistance/continuity test of cables on the drum, after laying, prior to trench back filling and after termination.
</li></ul><ul><li> Witness Hi-pot test of cables.
</li></ul><ul><li> Inspect/witness final torquing of the cable termination.
</li></ul><ul><li> Inspect installation of cable tray cover.
</li></ul><ul><li> Surveillance during installation of equipment at substation to ensure manufacturer&rsquo;s recommendations are followed.
</li></ul><ul><li> Monitor preservation activities of switch gears, transformers, bus ducts and other equipment.
</li></ul><ul><li> Inspection of switch gear installation for alignment, location etc.
</li></ul><ul><li> Witness torquing of bus bar joints and doctor test.
</li></ul><ul><li> Witness IR test of bus bar.
</li></ul><ul><li> Witness Hi-pot test of bus bar wherever applicable.
</li></ul><ul><li> Witness various testing of switchgears including IR, Hi-pot, ductor, operational etc.
</li></ul><ul><li> Witness Transformer oil dielectric test.
</li></ul><ul><li> Witness IR test of transformer.
</li></ul><ul><li> Witness various electrical tests as per applicable ITP/vendor docs.
</li></ul><ul><li> Final inspection of transformers, Switchgears, MCCs and other equipment&rsquo;s.
</li></ul><ul><li> Inspect installation of Bus duct.
</li></ul><ul><li> Witness torquing, ductor/IR test of bus duct.
</li></ul><ul><li> Inspect batteries, chargers and UPS. Where applicable, witness charging/discharging test of batteries.
</li></ul><ul><li> Inspect underground earth cable installation, cad weld joints etc prior to trench back filling.
</li></ul><ul><li> Inspect installation of earth electrode and earthing system.
</li></ul><ul><li> Witness earth resistance test of individual electrodes and earthing network.
</li></ul><ul><li> Witness earth loop resistance/continuity test.
</li></ul><ul><li> Inspection of lightning protection system of each building.
</li></ul><ul><li> Final inspection of earthing system.
</li></ul><ul><li> Inspect location of each lighting fixtures, socket out lets, junction boxes with respect to type/application.
</li></ul><ul><li> Inspect site routed lighting cable tray installation and release for cable laying.
</li></ul><ul><li> Inspect installation of distribution boards.
</li></ul><ul><li> Witness IR test of distribution boards.
</li></ul><ul><li> Witness IR/continuity test of lighting circuits.
</li></ul><ul><li> Witness functional test of each lighting circuits, where applicable only.
</li></ul><ul><li> Witness illumination level test, where applicable only.
</li></ul><ul><li> Monitor preservation activities of motors throughout project period.
</li></ul><ul><li> Inspect installation of motors including glanding termination, earthing.
</li></ul><ul><li> Witness IR test and /or polarization index test etc as applicable.
</li></ul><ul><li> Inspect installation of local control stations.
</li></ul><ul><li> Witness functional test from local control station to Substation, if applicable.
</li></ul><ul><li> Witness motor solo run test (2hrs for LV motors and 4 hrs for MV/HV motors), if applicable.</li></ul><br>
<p>
</p><p><b>ESSENTIAL QUALIFICATIONS AND SKILLS:</b></p>
<ul>
<li>Minimum 7 years&rsquo; experience as Electrical QC Inspector.</li>
<li>Should have experience in oil &amp; gas/Petrochemical industry.
</li><li>Should have previously worked with major EPC contractors or their subcontractors.
</li><li>For Hazardous Area Electrical Inspections: Should be an experienced person whose training has included instructions on various types of protection and installation practices, IEC 60079-17 and IEC 60079-14. (Evidence of relevant experience and training claimed shall be documented and available). If no such training attended, he should undergo in-house training: PEC-RCD-00384, prior to assigning any Ex-Inspections.</li></ul></div><br /> <div id='job-id'>Job Id: pLGVfCdjqjkoBdZDcdkUHrxrO9YftAYMYkzranxeLU90VZSZciwT9SJFMI6vbx/b4RQkN8ViPb7a6fDitVL4af8qZxUeh4SsOrP7IWFHUzPPW/Y+DRZC0TxWflpM8SAMMpf1LhG3KIE8ng==</div>

Senior Inspector

Performance Environmental Services

<div><b>Benefits:</b><br>
<ul><li>401(k)</li>
<li>401(k) matching</li>
<li>Bonus based on performance</li>
<li>Competitive salary</li>
<li>Dental insurance</li>
<li>Health insurance</li>
<li>Paid time off</li>
</ul><br>
Provide Project Management for asbestos, lead, IH, and IAQ/Mold and restoration consulting services. Provide coordination and oversight of small to large-scale restoration projects including scheduling, assessment, sampling and review. Preparing proposals, writing/reviewing technical reports, drafting invoices and reviewing project profitability.<br>
<br>
<br>
The ideal candidate will have:<br>
<br>
<ul><li>B.S./B.A. degree in environmental science, industrial hygiene, or another related field.</li>
<li>Minimum 5 years of related consulting work.</li>
<li>Minimum 5 years experience in the restoration field, including assessing buildings for damage due to water or fire and providing protocols for restoring the structure to a pre-loss condition</li>
<li>Familiarity with IICRC standards and recommendations</li>
<li>Demonstrable technical writing skills</li>
<li>Experience in industrial hygiene sampling and worker exposure monitoring sampling for various analytes, including scope and sampling methodology development. Knowledgeable of OSHA PEL&rsquo;s, NIOSH, and ANSI standards and guidelines</li>
<li>Experience in Environmental Site Assessments (Phase I/II/III) and site remediation</li>
<li>Ability to manage multiple projects concurrently</li>
<li>Strong written and verbal communication skills.</li>
<li>Proven proficiency with Microsoft Office suite including Excel, Word, Powerpoint and Outlook.</li>
<li>Experience with AutoCad or drafting software preferred</li>
</ul>The following certifications and accreditations are preferred but not required..<br>
<br>
<ul><li>Indoor Air Quality or Microbial Assessment certification or accreditation preferred (CIEC, CIE or similar)</li>
<li>Asbestos Building Inspector</li>
<li>Lead Inspector/Risk Assessor</li>
<li>NIOSH 582</li></ul></div><br /> <div id='job-id'>Job Id: MMqffv/JumQE7AaeEMADryRSlxyxJgWFp0ITfb0ggFYThkJg2mRqoA/OTJU6NNICbjFCTj5kDs0bbcOeIIyYuWq8lB7hJM/4r4gKMySPnzLLLkKuqguc94zi4vpTI5FQHjqC</div>

Environmental Project Manager - IAQ

Bureau Veritas

<div><div><div><div><ul><li>Position Details</li></ul></div><div><div><div><br>
<ul><li>
Position</li></ul></div></div><div>
LIFTING &amp; RIGGING INSPECTOR</div></div><div><div><div><br>
<ul><li>
Office / Department</li></ul></div></div><p><br>
INSPECTION AND VERIFICATION SERVICES (IVS)</p></div><div><div><div><br>
<ul><li>
Reporting to</li></ul></div></div><p><br>
BNI OPERATIONS MANAGER</p></div><div><div><div><br>
<ul><li>
Key Working Relationship</li></ul></div></div><p><br>
IVS OPERATIONS MANAGER, IVS TECHNICAL/DEPUTY MANAGER, LIFTING SURVEYORS, MEP/FIRE SAFETY SURVEYORS, RIG MECHANIC SURVEYOR /RIG AUDITOR</p></div><div><br>
<ul><li>
Minimum Required Qualifications</li></ul></div><div><div><div><br>
<ul><li>
Education</li></ul></div></div><p><br>
Diploma/Bachelors Degree in Engineering<br>
</p></div><br>
<div><div><div><div><ul><li>Training/</li></ul></div></div><p>
Specialty</p></div><p><br>
LEEA Certification, Diploma in Lifting Equipment Inspection and certification, In-house training in Inspection of Equipment in Hazardous Areas (Zone II), NDE, H2S, Breathing Apparatus, Firefighting Training, Basic First Aid, Offshore/Sea Survival.</p></div><div><div><div><br>
<ul><li>
Technical knowledge</li></ul></div></div><p><br>
Fundamentals of Elevators, Escalators, Lifting and Handling Equipment</p></div><div><div><div><br>
<ul><li>
Experience</li></ul></div></div><div><div><br>
Min 5 years in inspection and certification (Lifting &amp; Rigging Inspector)</div></div></div><div></div><div><br>
<ul><li>
Responsibilities / Authorities</li></ul></div><div><div><div><br>
<ul><li>
Primary Functions</li></ul></div></div><ul><li>
Conduct Inspections.</li><li>
Prepare Reports</li><li>
Review of applicable contractual requirements (Technical standards, specifications etc.)</li><li>
Definition and review of Quality Plan and relevant procedures.</li><li>
Review and validation of inspection assignment documentation (technical aspects, reference documentation, schedule, milestones, reporting, logistics, co-ordination procedure, etc.)</li></ul></div><div><div><div><br>
<ul><li>
Technical Expertise</li></ul></div></div><ul><li>
Knowledge of the working of Lifting &amp; Rigging equipment&rsquo;s
</li><li>Quality Standards</li><li>
Application of codes and standards, project specifications and procedures</li><li>
Within his field of competency, the inspector is expected to conduct the activities stated in Primary functions.</li><li>
Fully conversant with relevant inspection techniques and able to select the most appropriate inspection technique.</li><li>
Able to verify and approve non-conformities / corrective actions</li><li>
Able to identify the required Bureau Veritas interventions, based on a pre- defined Quality Plan and according to specified standards.</li><li>
Able to review / appraise inspection procedures</li><li>
Able to manage one or more level 1 Inspectors / surveyors</li></ul></div><div><div><div><br>
<ul><li>
Business Requirements</li></ul></div></div><ul><li>
Inspection &amp; Verification by adhering to Quality Standards and Federal Legal requirements</li></ul></div><div><div><div><br>
<ul><li>
Self Management</li></ul></div></div><ul><li>
Honesty, Integrity, Punctuality, Accuracy and courteousness</li></ul></div><div><div><div><br>
<ul><li>
Customer Focus</li></ul></div></div><ul><li>
Time management</li><li>
Proper Communication</li><li>
Dedicated Service</li><li>
Timely issue of Reports</li></ul></div><div><br>
<ul><li>
Performance Monitoring</li></ul></div><div><div><div><br>
<ul><li>
Continual Development</li></ul></div></div><div><p><br>
Updating of Quality Standards</p><p>
Study of Federal Decrees, pertaining to the scope of work</p></div></div><div><div><div><br>
<ul><li>
KPIs</li></ul></div></div><ul><li>
Technical Maturity</li><li>
Time Management</li><li>
Integrity</li><li>
Presentation &ndash; On Site and Offsite</li></ul></div></div></div></div><div></div><br /> <div id='job-id'>Job Id: iiypCb4DlLVGrIQvn6e3VQYbex4DkpRklgsa6JKb7Bec7mDjPCFiMHpXncE55HOBbFdLbT1Y7J0dVwvQBqKs8my3MbtZdHaLtSbN</div>

Rigging & Lifting Inspector

Euro Group Engineering Consultancy

<p><b>Job Summary:</b></p><p>The Civil Inspector is responsible for supervising and ensuring the quality, safety, and compliance of road construction activities in accordance with project specifications, engineering standards, and safety regulations. The incumbent will monitor construction processes on-site, inspect materials and workmanship, and verify that work progresses according to scheduled plans. They will coordinate with contractors and project managers to address any issues that may arise, ensuring timely completion of the project with the highest standards of quality and safety. The Civil Inspector must maintain detailed documentation of inspections and conditions to support project progress and compliance.</p><p><b>Key Responsibilities:</b></p><ul><li>Conduct thorough inspections of road construction sites to ensure compliance with technical specifications, project plans, and safety standards.</li><li>Monitor and report on the progress of construction activities and resolve any compliance issues that may arise.</li><li>Review plans, blueprints, and project documents to ensure accuracy and completeness.</li><li>Coordinate with construction managers, engineers, and contractors to ensure project timelines and quality standards are met.</li><li>Document inspection findings and prepare detailed reports for project stakeholders.</li><li>Ensure all materials and workmanship meet the required quality standards.</li><li>Assist in the resolution of onsite problems and discrepancies related to construction plans and specifications.</li><li>Ensure that all work is conducted safely and according to safety regulations and standards.</li><li>Maintain and update inspection records and logs.</li></ul><p><b>Qualifications:</b></p><ul><li>Diploma in Civil Engineering.</li><li>Minimum of 4 years of experience as a Civil Inspector in road construction or a related field.</li><li>Strong knowledge of construction methods, materials, and legal regulations related to road construction.</li><li>Excellent communication and interpersonal skills to effectively liaise with project team members and stakeholders.</li><li>Detail-oriented with strong analytical and problem-solving skills.</li><li>Ability to work independently and make informed decisions in a fast-paced environment.</li><li>Proficiency in using inspection tools and equipment.</li><li>Familiarity with relevant computer software and tools for inspection and reporting purposes.</li></ul><p>Job Type: Contract<br/>Contract length: 12 months</p><p>Expected Start Date: 03/08/2025</p><br /> <div id='job-id'>Job Id: R34eAYO6ebLs/Kf9n6HMorYNGPnEHuKf3PpbVs4vJjv0vwU8RtXjLVfuhe4gnx5V8dnKK8SG6rt4ciF3Ziuus0tPDC9Dt8kdBwUD+ccVwEp5/dM7xSJgrIlC67fTWLUPmXuS/UqAlP7Bl/xy7oRGPA==</div>

Civil Inspector - Roads Construction Project

Fulkrum

<div><p><b>Join Fulkrum &ndash; Be Part of a Global Success Story</b></p>
<p>
Fulkrum is a global leader in inspection, expediting, auditing, and technical staffing services, delivering exceptional solutions to the energy, engineering, and construction industries for over 14 years. Headquartered in the UK, we have established a strong presence across six continents, serving more than 300 clients worldwide.</p>
<p>
Our commitment to excellence has been recognised with prestigious awards, including the King&rsquo;s Award for Enterprise in International Trade (2023), the People and Competency Award at the EIC Awards (2023), and the Scale-Up Award at the WESCA North America Awards (2024).</p><br>
<p></p>
<p>
Our Abu Dhabi office is currently seeking a proactive and detail-oriented <b>QC Inspector </b>to join our team and support our operational functions.</p><br>
<p></p>
<p><b>
Job Summary:</b></p>
<p>
The QC Inspector is responsible for ensuring that products, materials, and processes meet established quality standards and regulatory requirements. This role involves conducting inspections, identifying non-conformities, and working closely with production and engineering teams to maintain consistent quality throughout the project lifecycle.</p><p></p><p><b><br>
Key Responsibilities:</b></p>
<p><b>
Field Inspection &amp; Testing:</b></p>
<ul>
<li>Represent Fulkrum and its clients in the execution of field QC activities</li>
<li>Conduct visual inspections of commodities in line with qualifications and experience.</li>
<li>Review material test certificates and verify compliance.</li>
<li>Witness and verify Non-Destructive Testing (NDT) and Factory Acceptance Tests (FAT) in various formats.</li>
<li>Perform pre-shipment inspections and ensure readiness for dispatch.</li>
<li>Carry out inspections based on Inspection and Test Plans (ITPs), reviewing client-provided ITPs and method statements, and resolving discrepancies.</li></ul><br>
<p></p>
<p><b>
Reporting &amp; Documentation:</b></p>
<ul>
<li>Create, review, and submit detailed field inspection reports.</li>
<li>Accurately report all findings, including issuing Non-Conformance Certificates when applicable.</li>
<li>Maintain strict confidentiality of all inspection data and share findings only with authorized client representatives.</li></ul><br>
<p></p>
<p><b>
Qualifications:</b></p>
<ul>
<li>Diploma or Bachelor&rsquo;s degree in Mechanical Engineering</li>
</ul><ul><li>Minimum 5 years&rsquo; experience as a QC Inspector for Bachelor's degree holders.</li>
<li>Minimum 8 years&rsquo; experience for Diploma holders</li></ul><br>
<p></p>
<p><b>
Why Join Us?</b></p>
<p>
This is an exciting opportunity for an experienced QC Inspector to showcase their skills in a dynamic and supportive environment. At Fulkrum, you will play a vital role in ensuring operational continuity and legal compliance in one of our key global regions.</p>
<p>
We offer a fantastic working environment with a highly engaged team and consistently high eNPS scores. Fulkrum&rsquo;s continued growth is a testament to our commitment to excellence and innovation. Our team enjoys regular recognition initiatives, a social budget, and a refer-a-friend scheme.</p>
<p>
Join us and contribute to our mission while growing your own career in a high-performance culture.</p>
<p><b>
Apply now and become a valued part of the Fulkrum team.</b></p><br>
<p></p>
<p>
Fulkrum</p></div><br /> <div id='job-id'>Job Id: 30uMiT/sxA00R1mQiDsZY0d8jYMsEdFJ7pUOqwgexyznWuJ6MZHEoBlYaaR4Yo8FIVLx8ldmmsCd3g96vXXW+12vr2aFkzZT9OHvprhoPp6ippNHNwCUiYbEwFzjEwCaImPNU2BKnXqauZcU/7dpnnLy1w==</div>

QC Inspector

<div><div><div><div><div><ul><li></li></ul>
</div><div><p><b>1. Position Details</b></p><p><br>
1.1. Position<br>
E&amp;I Inspectors</p><p><br>
1.2. Office / Department<br>
IND</p><p><br>
1.3. Reporting to<br>
Team Leader</p><p><br>
1.4. Key Working Relationship</p><ul><li>
IND Manager</li><li>
Project Manager</li><li>
Technical Manager</li><li>
Deputy Technical Manager</li><li>
Customers / Clients / Project Management Consultants</li><li>
He is expected to establish direct contact with Client and whenever necessary with other Bureau Veritas organization.</li></ul><p><b><br>
2. Minimum Required Qualifications</b></p><p><br>
2.1. Specialty<br>
Sound knowledge in Electrical/Instrument Engineering Related Activities</p><p><br>
2.2. Education<br>
Degree / Diploma in Electrical/Instrumentation Engineering</p><p><br>
2.3. Training<br>
Site Safety Induction<br>
Specific Technical Induction for Specific Projects if Required</p><p><br>
2.4. Technical knowledge<br>
Strong knowledge of the International Codes &amp; Standards<br>
Experience with Electrical/Instrumentation Inspection according to relevant Codes<br>
Application of Codes and standards, project specifications and procedures.</p><p><br>
2.5. Experience<br>
Inspector/Technician : Minimum 5 years experience in similar field<br>
Engineer Surveyor : Minimum 8 years experience in similar field<br>
Senior Engineer Surveyor : Minimum 10 years experience in similar field</p><p><b><br>
3. Responsibilities / Authorities / Accountabilities</b></p><p><br>
3.1. Primary Functions</p><ul><li>
Review of applicable Inspection Test Plans, Quality Plan and Procedures.</li><li>
Review and validation of inspection assignment documentation (technical aspects, reference documentation, schedule, milestones, reporting, logistics, co-ordination procedure, etc.)</li><li>
Definition of Bureau Veritas interventions</li><li>
Selection of the most appropriate inspection techniques</li><li>
Execution of inspection according to pre-defined Quality Plan, and to the established inspection procedures / techniques</li><li>
Execution of inspection reporting including treatment of Non-conformities (NCR&rsquo;s) and other applicable deliverables</li><li>
Ensuring quality of inspection according to BV Quality System</li><li>
Interpretation of results of inspections</li><li>
Treatment of Non-conformities / corrective actions</li><li>
Review and appraisal of inspection procedures</li><li>
Maintaining internal communication</li><li>
Promotes Bureau Veritas service portfolio to clients</li><li>
Respects security guidelines of Bureau Veritas and safeguards personal security in the working environment</li><li>
Actively participates in the sharing of knowledge and information (Knowledge Management)</li><li>
Monitor Electrical/Instrumentation Activities as per approved procedures and relevant Codes / Standards.</li><li>
Inspection of Electrical/Instrumentation Activities according to relevant Codes</li><li>
Prepare inspection reports on time and submit to Team Leader</li></ul><p><br>
3.2. Technical Expertise</p><ul><li>
Application of codes and standards, project specifications and procedures</li><li>
Within his field of competency, the inspector is expected to conduct the activities stated in Primary functions.</li><li>
Fully conversant with relevant inspection techniques and able to select the most appropriate inspection technique.</li><li>
Able to verify and approve Non-conformities / corrective actions</li><li>
Able to identify required Bureau Veritas interventions, based on a pre-defined Quality Plan and according to specified standards.</li><li>
Able to review / appraise inspection procedures</li></ul><p><br>
3.3. Business Requirements</p><ul><li>
Report to Team leader about day-to-day inspection, non-compliance /discrepancy to specification.</li></ul></div></div><div><div><ul><li></li></ul>
</div><div><p>3.4. Self Management</p><ul><li>
Maintains a high degree of expertise through permanent specialized training and knowledge management.</li><li>
Ensure that inspection is carried out as per approved drawings / Inspection test plans.</li><li>
Meet project development objectives</li><li>
Should be Results oriented, Service driven and Problem solving</li><li>
Comply with company regulations, procedures and Code of Ethics.</li></ul><p><br>
3.5. Customer Focus</p><ul><li>
Ensure that Inspection is carried out as per Inspection test plans and other applicable Technical specifications.</li><li>
Understand client needs and work to achieve successful project outcomes.</li><li>
Develop trust and open communication with the client.</li></ul><p><br>
3.6. HSE Requirements</p><ul><li>
Comply at all times with all applicable legal requirements, BV HSE Policies and procedures, client&rsquo;s HSE procedures and code of practices.</li><li>
Maintain personal work areas tidy and hazard free and report any deviation/fault/hazard immediately to the location manager/line manager/supervisor</li><li>
Report immediately any newly identified hazard and participate in devising suitable operational control to eliminate/minimize the pertinent risk.</li><li>
Report immediately any HSE incident and cooperate in investigation</li><li>
Use appropriate PPE at work area and be aware of:</li></ul><p>
 o the risks appropriate PPE will control or minimize<br>
 o Report immediately incase the PPE is worn off or lost.</p><ul><li>
Communicate to their immediate manager any unsafe work practice or condition and opportunities for improvement of HSE practices.</li><li>
Take care of your own health and safety and that of people who may be affected by what you do (or do not do). &middot;</li><li>
Co-operate with others on health and safety, and not interfere with, or misuse, anything provided for your health, safety or welfare.</li></ul><p></p><p><b><br>
4. Performance Monitoring</b></p><p><br>
4.1. Continual Development</p><ul><li>
The opportunities for improvement in</li><li>
Technical and professional competencies through attending specialized training courses and seminars</li><li>
Stay updated on all Electrical/Instrumentation related developments</li></ul><p><br>
4.2. KPI&rsquo;s</p><ul><li>
Time taken to deliver the report to the Team Leader</li><li>
Quality of report</li><li>
Inspection done within the allocated timeframe</li><li>
Share information, Best practice, Knowledge Management</li></ul><p><br>
4.3. Monitored By<br>
Team Leader - Site Inspection Services</p></div></div></div></div></div><br /> <div id='job-id'>Job Id: e0ike0FvwfH/9z+S5JqZu2ITYNt9nUJEm8NV/0Q0XIMTcEOyvbA1tbzjlFGq93K7OJQhrEn43bXcuEaivHHJFCiL0cEtSOamjM6U</div>

QA/QC Inspector - E&I

Search 10000+ Inspector i   quality jobs near you this August. New roles added regularly across leading industries. Apply today.