Urwah Admin

Air Products

<div>At Air Products, we reimagine what&rsquo;s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together &ndash; where every voice is heard and everyone knows they belong and matter &ndash; we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities. 
Reimagine What&rsquo;s Possible 
Provide technical leadership and act as the site electrical engineering consultant for the NEOM Green Hydrogen Plant (GHE), ensuring safe, reliable, and cost-effective delivery of electrical systems through construction, pre-commissioning, commissioning &amp; start-up (CSU) and operation. Drive resolution of complex technical challenges, enable cross-functional alignment for successful plant energization, and strengthen team capability to support predictable, high-quality and timely project execution.<h2 class="jobSectionHeader">
Nature &amp; Scope</h2><ul><li>
Provides electrical engineering leadership and site support across Neom Green Hydrogen Plant (GHE) process units, including Air Separation Unit (ASU), Alkaline Water Electrolysis (AWE)/Hydrogen Production, Ammonia plant, Hydrogen &amp; Ammonia storage, utilities (Compressed Dry Air, demineralized water, cooling water), Jetty Area, GHE Buildings Scope and Centralized Diesel Generation plant.</li><li>
Operates within a multi-disciplinary, multi-contractor EPC environment, interfacing with Project Management, Construction, Pre-Commissioning, CSU and NGHC Operations teams as well as vendors and OEMs.</li><li>
Covers the full electrical scope, including MV/LV distribution, electrical substations, SCADA, large rotating equipment, drive systems, Rectifiers, protection schemes, earthing, lighting and hazardous area design.</li><li>
Provides technical oversight of power quality and grid integration, including harmonics filters, STATCOM/dynamic reactive compensation, power factor correction, load shedding and Saudi Grid Code compliance.</li><li>
Addresses complex, cross-functional technical challenges requiring strong engineering judgment, timely decision-making, and alignment across stakeholders in a schedule-driven project environment.</li><li>
Supports the transition from project execution to operational readiness, ensuring systems are safe, reliable, maintainable, and compliant with applicable standards.</li></ul><h2 class="jobSectionHeader">
Key Responsibilities</h2><ul><li>
Independently lead and supervise site electrical engineering activities to ensure safe, high-quality, and timely execution, while resolving complex and critical issues through structured problem definition, troubleshooting, root cause analysis (RCA), and effective solution implementation.</li><li>
Drive site electrical engineering execution through timely response to TQs/RFIs, effective closure of walkdown punch items, and completion of Electrical Operational Readiness Inspections (ORI), while managing Field Change Notices (FCNs) for temporary site modifications and ensuring accurate RLM/as-built records aligned with actual site conditions.</li><li>
Drive effective cross-functional coordination with Project Management, Construction, Pre-Commissioning, CSU and Operations teams to support safe and timely execution.</li><li>
Coordinate engineering activities with mechanical, piping, civil/structural, process control, process systems, process safety, fire protection, HCIS security, and cybersecurity teams to ensure effective multidisciplinary integration and alignment.</li><li>
Manage interfaces with EPC construction contractors, vendors, and OEMs to support troubleshooting across construction through start-up, ensuring high-quality execution and timely project delivery in line with schedule requirements.</li><li>
Demonstrates expertise in large rotating equipment and drive systems, including steam turbine generators (STG), standby generators, induction and synchronous motors (e.g., compressors and pumps), MV/LV VSDs/VFDs, and soft starters, with advanced knowledge of drive topologies (CSI/VSI such as LCI and CHB), protection schemes, and resolution of complex starting and operational challenges, including witnessing SAT in accordance with project requirements.</li><li>
Lead interface coordination and integration of the GHE plant with Power Generation (solar, wind, BESS) and grid systems (EPMS, 380 kV substations/OHTL, 33 kV STATCOM), ensuring compliance with the Saudi Grid Code and driving grid impact, system stability, harmonics, and power quality studies with robust mitigation strategies.</li><li>
Prepare and review as built markups (Red line) for key electrical deliverables, including MV/LV distribution systems, grounding, lighting, hazardous area classification, SLDs, schematics, Relay logic diagrams including inter-tripping &amp; interlock, protection schemes, relay protection settings, system studies (Load Flow, Motor Starting, Short Circuit using ETAP or SKM), load lists, cable sizing, and AC/DC UPS &amp; battery sizing.</li><li>
Ensure electrical designs comply with safety principles, Air Products standards, Local Saudi Standards (e.g. HCIS, SBC, Saudi National Grid Code) and international codes (IEC/IEEE/NFPA/IS).</li><li>
Participate in 3D model reviews, design reviews, and constructability assessments to ensure maintainability and operability.</li><li>
Mentor and develop engineers and designers, promoting technical excellence, standardization, and continuous improvement.</li><li>
Promote Our Way of Leading behaviors, fostering collaboration, accountability, and high-performance team culture.</li></ul><h2 class="jobSectionHeader">
Qualifications</h2>
Required:<ul><li>
Bachelor&rsquo;s degree in Electrical Engineering.</li><li>
15&ndash;20 years of electrical engineering experience</li><li>
Experienced in leading engineers and designers in project execution environments through design, construction, commissioning &amp; start-up and operation phases.</li><li>
Strong expertise in MV/LV systems, grounding, protection coordination, and hazardous area design.</li><li>
Knowledge of Local Saudi Standards (HCIS, SBC, Saudi National Grid Code) and international codes (IEC/IEEE/NFPA/IS).</li><li>
Strong interpersonal, communication and multi‑discipline collaboration skills.</li></ul>
Preferred:<ul><li>
Master&rsquo;s degree in Electrical Engineering.</li><li>
Experience in global EPC/EPCM execution structures.</li><li>
Proficiency with electrical analysis tools such as SKM or ETAP.</li><li>
Experience with digital engineering and 3D model review tools.</li></ul>
Licenses / Certifications:<ul><li>
Chartered Engineer (CEng), Professional Engineer (PE), or equivalent (Preferred).</li></ul><h2 class="jobSectionHeader">
Competencies &ndash; Supervisor Level (Our Way of Leading)</h2><ul><li>
Develops Talent: Coaches engineers and supports growth in technical capability.</li><li>
Sets Clear Expectations: Communicates priorities and quality standards clearly.</li><li>
Builds Trust &amp; Collaboration: Fosters an inclusive, respectful team culture.</li><li>
Drives for Results: Ensures reliable, safe, and high‑quality engineering outcomes.</li><li>
Decision Quality: Applies strong judgment to complex technical challenges.</li><li>
Safety Leadership: Reinforces safe‑by‑design and supports zero‑incident culture.</li></ul><h2 class="jobSectionHeader">
Safety &amp; Compliance</h2><ul><li>
Ensure electrical engineering activities comply with Air Products Safety Principles.</li><li>
Embed safe‑to‑maintain, safe‑to‑operate, and safe‑to‑construct philosophies in designs.</li><li>
Participate in HAZID, HAZOP, electrical safety reviews, and engineering audits.</li><li>
Ensure adherence to regulatory and environmental compliance requirements.</li></ul><h2 class="jobSectionHeader">
Work Hours</h2><ul><li>
The position operates on a rotational schedule of 8 weeks on-site followed by 2 weeks off, subject to NEOM site assignment policy. During on-site periods, employees will work 6 days per week, 10 hours per day (60 hours per week).</li></ul><h2 class="jobSectionHeader">
Travel</h2><ul><li>
0&ndash;10% domestic or international travel may be required based on project needs.</li></ul>
#LI-LG1 
Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what&rsquo;s possible and generate a cleaner future for our customers, our communities, and the world.</div>

Senior Principal Engineer - Electrical

<div>
 At Air Products, we reimagine what&rsquo;s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together &ndash; where every voice is heard and everyone knows they belong and matter &ndash; we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.
 
 
 
 Reimagine What&rsquo;s Possible
 
 
 
 
 Principal Accountabilities:
 
 
 
 
 Safety
 
 
 
 <ul>
 <li>
 Provide &amp; maintain a safe work environment. Demonstrate leadership with all company &amp; industry safe work processes to prevent all injuries.
 </li>
 <li>
 Adherence to company HSSE policy and procedures. Ensure all Environmental Regulatory requirements are met. Ensure Air Products and APQ standards, and global best practices for EH&amp;S, productivity, reliability, quality, and overall customer services are met.
 
 
 </li>
 </ul>
 
 Technical
 
 
 
 <ul>
 <li>
 Provide direction &amp; guidance based on technical feedback from Engineering and Maintenance for troubleshooting, maintenance, repair, and test activities.
 </li>
 <li>
 Provide Operations and Maintenance support. Maintain accurate document control and monitor quality assurance initiatives.
 </li>
 <li>
 Provide Operations and Maintenance guidance to ensure safety, reliability and maintainability of equipment, processes, utilities, facilities, controls, and safety/security systems.
 </li>
 <li>
 Provide Operations and Maintenance input for scheduled outages to ensure contractual requirements are achieved
 </li>
 <li>
 Manage plant production efficiently based on data driven decisions to ensure safety and reliability targets are met to achieve maximum profitable.
 </li>
 <li>
 Work closely with business areas to identify productivity expansion projects.
 
 
 </li>
 </ul>
 
 Operations and Maintenance
 
 
 
 <ul>
 <li>
 Ensure the safety of all operations and maintenance personnel by utilizing the APQ Basic Safety Practice program, which includes Safety Work Permits, LOTO, Confined Space, etc. The position facilitates planning, organizing, auditing, and follow-up, to build the Air Products safety culture into the APQ. Meet the customer&rsquo;s satisfaction on safety, reliability, product quality, and flexibility on product supply.
 </li>
 <li>
 Responsible for performing all tasks assigned in a safe and responsible manner in accordance with the established operating procedures and written or oral instructions from Superintendent.
 </li>
 <li>
 Ensure that maintenance notifications in SAP are carried out correctly. Verify SAP notification on field and approved with basic data i.e. functional location, malfunction description, damage code, priority, and hazard information.
 </li>
 <li>
 Participate in pre-work visits with Maintenance and Contractors to identify risk activities.
 </li>
 <li>
 Ensure each work permit related documents are prepared and handed over to the team.
 </li>
 <li>
 Participate in preparing maintenance or process shutdowns and turnarounds i.e. scope of works, prioritization of notifications (define consequences of malfunctions in terms of sector availability).
 </li>
 <li>
 Participate in area daily meeting and share the maintenance plan with team to ensure all equipment&rsquo;s are prepared for scheduled maintenance works (corrective and preventive).
 </li>
 <li>
 Participate in maintenance plan daily meetings with the Maintenance Leader and Planners to analyze daily notifications, and to contribute to the updating of the weekly maintenance schedule.
 </li>
 <li>
 Ensure equipment&rsquo;s readiness for maintenance activity and after completion back to operations.
 </li>
 <li>
 Manage and organize regular equipment testing and routine preventive Maintenance.
 </li>
 <li>
 Participate in the marking priority maintenance activities to guarantee the reliability and operational continuity of equipment and to agree the date of repair.
 </li>
 <li>
 Release and ensure all work permit precautions and required conditions are fulfilled, maximize safe work permit practices by healthy communication &amp; frequent site visits, ensure zero permit deviation
 </li>
 <li>
 Manage interface with all support departments for maintenance activities
 </li>
 <li>
 Need to have the necessary skills for conducting risk assessment and participate in unusual operational or maintenance activities.
 </li>
 <li>
 Contribute to achieving routine maintenance KPIs and objectives specific to the se reliability, planning and scheduling.
 </li>
 <li>
 Ensure availability and updating of required procedures and schedules for special operations.
 </li>
 <li>
 Ensure minimum forced tags &amp; bypasses during operation by proper maintenance planning. Follow SIF procedure for forced tags &amp; bypasses.
 </li>
 <li>
 Build the plant technical capability through support coordination from Air Product&rsquo;s Regional and Global teams.
 </li>
 <li>
 Provide coaching and motivation to the operations team to achieve operational excellence and customer satisfaction.
 </li>
 <li>
 Develop, train, and promote top performing operation personnel who achieve success through teams, customer and employee focused, foster open communication, performance driven, and results oriented.
 </li>
 <li>
 Establish &amp; maintain close working relationships with engineering and maintenance personnel to continuously monitor &amp; evaluate plant systems &amp; equipment.
 </li>
 <li>
 Provide operations and maintenance support and participate / lead incident investigations and Root Cause Analysis. Identify &amp; implement sustainable corrective action(s).
 </li>
 <li>
 Act as the Single Point of Contact when dealing with internal issues of the facility, representing APQ and coordinating internal resources.
 </li>
 <li>
 Facilitate attainment of operations excellence and customer satisfaction via operations productivity, reliability, quality, cost reduction, services, continuous improvements, and meeting of budgets.
 
 
 </li>
 </ul>
 
 Minimum Requirements And Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in chemical, Mechanical, or Process Engineering a minimum.
 </li>
 <li>
 10 years minimum in gas, petrochemical, or related industries in operations, engineering, and/or maintenance function. Air Separation and /or Steam Methane Reformer Operations a plus.
 </li>
 <li>
 6+ years in line supervision of process operations roles.
 </li>
 <li>
 Proven coordination experience in a multi team environment which includes operations, engineering, and maintenance.
 </li>
 <li>
 Good leadership, interpersonal and teamwork skills with the ability to communicate clearly and effectively throughout all levels within the organization and externally.
 </li>
 <li>
 Promotes a &lsquo;one team&rsquo; environment
 </li>
 <li>
 Ability to communicate and manage customer interactions on a daily basis.
 </li>
 <li>
 Wide technical knowledge in operations, engineering, and maintenance activities.
 </li>
 <li>
 Proficiency in English speaking and writing.
 </li>
 <li>
 Knowledge and understanding of local environmental and health and safety requirements.
 
 
 </li>
 </ul>
 Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what&rsquo;s possible and generate a cleaner future for our customers, our communities, and the world.
</div>

Assistant Site Manager

<div>
 At Air Products, we reimagine what&rsquo;s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together &ndash; where every voice is heard and everyone knows they belong and matter &ndash; we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.
 
 
 
 Reimagine What&rsquo;s Possible
 
 
 
 
 POSITION SUMMARY
 
 
 
 
 Purpose
 
 
 
 The HYCO Steam Methane Reformer Shift Operator is accountable for the day-to-day operation for one of the APQ facilities which can include a Hydrogen Steam Methane Reformer, a CO2 Removal Unit &amp; CO2 Compression, Auxiliary PSA, Membrane Unit, related Utilities and pipeline network for the Air Products Qudra (APQ) Company in Jubail, Saudi Arabia.
 
 
 
 Nature &amp; Scope
 
 
 
 The HYCO Shift Operator, reporting to the HYCO Lead/Shift Supervisor, is accountable for the day-to-day operation of the HYCO facility, ensuring the production requirements set by the customer are achieved in a safe and efficient manner. The Shift Operator will execute daily tasks which include preparing and implementing safety work permits, LOTO, complete operations preventative maintenance activities, and assist the maintenance and engineering teams in preparing and executing corrective maintenance activities.
 
 
 NOTE: &ldquo;ALL OPERATORS INTERVIEWED BASED ON YEARS OF SERVICE, EXPERIENCE, AND LEADERSHIP SKILLS WILL BE EVALUATED AND CONSIDERED FOR LEAD AND SUPERVISOR POSITIONS AFTER COMPLETION OF THE OPERATOR PROGRESSION COURSE. PERSONS WITH A MINIMUM OF 5 YEARS TO 15 + YEARS EXPERIENCE IN PLANT OPERTIONS AND LEADERSHIP POSITIONS WILL BE CONSIDERED&rdquo;.
 
 
 
 Principal Accountabilities
 
 
 
 
 Safety
 
 
 
 Maintain a safe work environment. Demonstrate leadership with all company &amp; industry safe work processes to prevent all injuries. Ensure proper documentation is maintained for safety related activities.
 
 
 
 Technical
 
 
 
 <ul>
 <li>
 Operate the HYCO Steam Methane Reformer and CO2 recovery units and ancillary equipment including water treatment units as prescribed by the Work Instruction Procedures
 </li>
 <li>
 Operate the pipeline network to supply hydrogen, steam, and CO2 to the pipeline customers safely and efficiently. The Pipeline operations team will be part of the overall operating team and will also manage the oxygen and nitrogen pipeline products.
 </li>
 <li>
 Provide Operations support &amp; guidance during the commissioning of the plant. Maintain accurate document control and monitor quality assurance initiatives.
 </li>
 <li>
 Provide Operations guidance to ensure safety, reliability and maintainability of equipment, processes, utilities, and controls.
 </li>
 <li>
 Manage plant production efficiently based on input provided from Plant Management and Plant Production Engineering to ensure safety and reliability targets are met to achieve maximum profitable.
 </li>
 <li>
 Report shift production progress and plant status to the Shift Supervisor, providing operational solutions for shortfall areas.
 
 
 </li>
 </ul>
 
 Operations
 
 
 
 <ul>
 <li>
 Ensure the safety of all operations personnel by utilizing the APQ Basic Safety Practice program, which includes Safety Work Permits, LOTO, Confined Space, etc. The position facilitates executing, organizing, and auditing, to build the Air Products safety culture into the APQ.
 </li>
 <li>
 Ensure compliance with process safety, MOC&rsquo;s, and OPHR requirements.
 </li>
 <li>
 Operate the facility insuring Environmental and Regulatory requirements are not exceeded.
 </li>
 <li>
 Assist in the commissioning activities of the facility
 </li>
 <li>
 Ensure Air Products and APQ standards, and global best practices for EH&amp;S, productivity, reliability, quality, and overall customer services are met
 </li>
 <li>
 Follow the Site Work Instruction Manuals for the HYCO, CO2, and ancillary equipment units, along with adhering to other operating and maintenance procedures and checklists to meet the customer&rsquo;s satisfaction on safety, reliability, product quality, and flexibility of product supply while in compliance of contractual requirements.
 </li>
 <li>
 Follow shift turnover protocols to ensure the safe and efficient handover to the following shift.
 </li>
 <li>
 Support &amp; maintain close working relationships with engineering and maintenance personnel to continuously monitor &amp; evaluate plant systems &amp; equipment through a Plant Process Advisory Model.
 </li>
 <li>
 Support the maintenance and engineering team in maintaining plant reliability through the execution of preventive maintenance activities scheduled and coordinating of corrective maintenance activities of the equipment in order to optimize activities during plant shut-downs to avoid business interruption.
 </li>
 <li>
 Provide operations support and participate in investigations and Root Cause Analysis in order to identify &amp; implement sustainable corrective actions.
 </li>
 <li>
 Facilitate attainment of operational excellence and customer satisfaction via operations productivity, reliability, quality, and continuous improvement initiatives.
 </li>
 <li>
 Maintain customer communications and relationships at the &lsquo;board&rsquo; level, insuring customer demand rates are satisfied while maximizing the efficiency and profitability of the facility.
 </li>
 <li>
 Communication of plant activities with other shifts to maintain continuity between shifts for a safe and reliable operation.
 </li>
 <li>
 Execute other duties as assigned from reporting managers in a timely and efficient manner.
 
 
 </li>
 </ul>
 
 Job Requirements
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Chemical, Mechanical, or Chemical Process Operations preferred. An Associate Technical Degree (2-year certificate) will be considered based on years of experience and competence. Experience in process plant operation, demonstrated Hydrogen/SMR/acid gas removal units production plant knowledge a plus with a minimum of 5 years plant operations experience.
 </li>
 <li>
 Expectation based on level of experience for the operations team to achieve a &lsquo;Level 1 / Board Level&rsquo; status within 2 &ndash; 4 years. Operators will be evaluated during the training period and placed at the level of competence accordingly. All the operations team are considered field and board operators when Level 1 is achieved.
 </li>
 <li>
 Knowledgeable in the local environmental and health and safety requirements.
 </li>
 <li>
 Demonstrated interpersonal skills.
 </li>
 <li>
 A strong commitment to employee involvement, team building and diversity.
 </li>
 <li>
 Able to communicate between operations and maintenance teams.
 </li>
 <li>
 Ability to communicate with the customer at the board level on a daily basis.
 </li>
 <li>
 Proficiency in English speaking and writing.
 
 
 </li>
 </ul>
 Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what&rsquo;s possible and generate a cleaner future for our customers, our communities, and the world.
</div>

HYCO Operator

<div>
 At Air Products, we reimagine what&rsquo;s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together &ndash; where every voice is heard and everyone knows they belong and matter &ndash; we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.
 
 
 
 Reimagine What&rsquo;s Possible
 
 
 
 The HYCO Field Operator, reporting to the DCS Operator &amp; Shift Supervisor, is accountable for the day-to-day Field Operation of HYCO facility, ensuring the production requirements set by the customer are achieved. The Field Operator is responsible for the safe, efficient, and environmentally compliant round-the-clock operation of the hydrogen production plant and all associated units. This role involves extensive field work, including equipment monitoring, routine checks, startup/shutdown activities, and first-line troubleshooting to ensure production targets are met.
 
 
 
 Principal Accountabilities
 
 
 
 
 Safety, Health &amp; Environment
 
 
 
 <ul>
 <li>
 Maintain a safe &amp; stable environment. Demonstrate leadership with all Company &amp; Industry safe work processes to prevent all injuries. Ensure proper documentation is maintained for safety related activities.
 </li>
 <li>
 Strictly adhere to all Personal Protective Equipment (PPE) requirements, Lockout-Tagout (LOTO) procedures, permit-to-work systems (Hot Work, Confined Space Entry), and safe work practices.
 </li>
 <li>
 Participate in and understand Process Hazard Analyses (PHA). Monitor and maintain safety-critical equipment and interlocks. Ensure compliance with process safety, MOC&rsquo;s, and OPHR requirements.
 </li>
 <li>
 Be a certified first responder for plant emergencies, including firefighting, gas leaks, and emergency shutdowns (ESD). Operate firewater monitors and other emergency equipment.
 </li>
 <li>
 Ensure all operations comply with environmental permits. Prevent and contain chemical spills. Maintain constant vigilance for hazards.
 </li>
 <li>
 Ensure the safety of all operations personnel by utilizing the BHIG Basic Safety Practice program
 
 
 </li>
 </ul>
 
 Technical &amp; Operations
 
 
 
 <ul>
 <li>
 Operate the Steam Methane Reformer based hydrogen plant with CO2 Removal section &amp; CO2 compression, PSA with Tail Gas compression, Membrane Unit and related utilities as prescribed by the Work Instruction Procedures
 </li>
 <li>
 Operate the pipeline network to supply Hydrogen, steam and CO2 to customers&rsquo; pipelines safely and efficiently.
 </li>
 <li>
 Ensure BHIG standards, and global best practices for EH&amp;S, productivity, reliability, quality, and overall customer services are met.
 </li>
 <li>
 Meet the customer&rsquo;s requirements regarding safety, reliability, product quality, and flexibility regarding product supply. Maintain customer communications and relationships at the &lsquo;field&rsquo; level, ensuring customer demand rates are satisfied while maximizing the efficiency and profitability of the facility.
 </li>
 <li>
 Follow the Site Work Instruction Manuals for production &amp; supply of Product H2, CO2 &amp; Steam along with other operating and maintenance procedures and checklists to meet the customer&rsquo;s satisfaction with safety, reliability, product quality, and flexibility of product supply while compliance with requirements.
 </li>
 <li>
 Constantly monitor all process variables (flows, temperatures, pressures, levels, analytical values) by regular field rounds. Conduct detailed and timely field rounds to inspect all equipment using sight, sound, smell and by monitoring local gauges and indicators. Make local adjustments to valves, dampers, and controllers as required to maintain process parameters within defined limits. Collect routine process samples from designated points.
 </li>
 <li>
 Execute the detailed start up sequence for the entire plant or individual units/loops form a cold condition, warm condition or hot stand by condition, ensuring a smooth &amp; safe transition to full load normal operations. Assist in the commissioning activities of the facility. Actively participate in plant startup and shutdown sequences as per detailed procedures.
 </li>
 <li>
 Maintain constant communication with DCS Operator &amp; Shift Supervisor, providing instructions for equipment adjustments, isolations and rounds.
 </li>
 <li>
 Liaise with the maintenance team to co-ordinate equipment preparation for maintenance (isolation, purging &amp; blinding) and safe taking equipment back in line.
 </li>
 <li>
 Conduct detailed and accurate shift handovers with incoming operators, highlighting any abnormalities, ongoing work and special instruction.
 </li>
 <li>
 Maintain accurate and timely logs of operating parameters, significant events and production data. Fully accountable to ensure his logs are accurate.
 </li>
 <li>
 Identify the root cause of process deviations and equipment malfunction. Work with engineers to implement long-term solutions.
 </li>
 <li>
 Suggest and participate in operational improvements and de-bottlenecking projects to enhance safety, reliability and profitability.
 </li>
 <li>
 Ensure compliance with all CM, PM tasks &amp; Environmental Regulatory requirements.
 </li>
 <li>
 Support and prepare for Shutdown Planning and Turnaround Planning.
 </li>
 <li>
 Provide coaching and motivation with the new joiner&rsquo;s field operators.
 </li>
 <li>
 Provide operations support and participate in investigations and Root Cause Analysis to identify &amp; implement sustainable corrective actions.
 </li>
 <li>
 Execute other duties as assigned by reporting managers in a timely and efficient manner. Execute operating directives from the Panel Operator to optimize plant performance.
 
 
 </li>
 </ul>
 
 Minimum Requirements And Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in chemical, Mechanical, or Chemical Process Operations with 5 years&rsquo; experience preferred. An Associate Technical Degree (2-year certificate) will be considered based on years of experience and competence.
 </li>
 <li>
 Experience in Field Operation, with minimum of 5 years in SMR based Hydrogen or Ammonia or Methanol or Syngas plant as Field Operator.
 </li>
 <li>
 Strong understanding of SMR process, pressure vessels, heat exchangers, furnaces, and rotating equipment (especially compressors). Strong mechanical aptitude and practical troubleshooting skills.
 </li>
 <li>
 Wide technical knowledge in operations, engineering, and maintenance activities
 </li>
 <li>
 Ability to maintain high level of awareness and make sound decisions under pressure. Strong problem solving and diagnostic abilities.
 </li>
 <li>
 Clear, concise and effective verbal and written communication. Proficiency in English speaking and writing. Able to communicate between operations and maintenance teams.
 </li>
 <li>
 A strong commitment to employee involvement, team building
 
 
 </li>
 </ul>
 Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what&rsquo;s possible and generate a cleaner future for our customers, our communities, and the world.
 
 
</div>

Field Operator

<div>
 At Air Products, we reimagine what&rsquo;s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together &ndash; where every voice is heard and everyone knows they belong and matter &ndash; we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.
 
 
 
 Reimagine What&rsquo;s Possible
 
 
 
 ABOUT THE COMPANY:
 
 
 BHIG&mdash;Blue Hydrogen Industrial Gases is a regional development and investment joint venture (JV) between Saudi Aramco and Air Products Qudra &ldquo;APQ&rdquo;. Our company benefits from the combined strengths of two leading entities. BHIG is positioned to drive industrial innovation and operational excellence across Saudi Arabia and the region. BHIG focuses on supporting clean energy goals through low-carbon hydrogen production.
 
 
 
 Reimagine What&rsquo;s Possible
 
 
 
 The HYCO Lead Operator, reporting to the HYCO Shift Supervisor, is accountable for the day-to-day DCS &amp; Field Operation of HYCO facility, ensuring the production requirements set by the customer are achieved. HYCO Lead Operator is responsible for the safe, efficient and stable operation of the entire Hydrogen Manufacturing Unit from a centralized control room using DCS. This includes monitoring, controlling and optimizing to meet production targets, quality specifications and environmental regulations. This includes actively supporting plant performance, process optimization and production stability while maintaining strong focus on safety &amp; compliance. The HYCO Lead Operator will execute daily tasks which include preparing and implementing safety work permits, LOTO, completing operations preventative maintenance activities, and assist the maintenance and engineering teams in preparing and executing corrective maintenance activities. Lead operator will handle the Shift lead responsibility in absence of Shift supervisor ensuring the business continuity.
 
 
 
 Principal Accountabilities
 
 
 
 
 Safety, Health &amp; Environment
 
 
 
 <ul>
 <li>
 Maintain a safe &amp; stable environment. Demonstrate leadership with all Company &amp; Industry safe work processes to prevent all injuries. Ensure proper documentation is maintained for safety related activities.
 </li>
 <li>
 Enforce and adhere to all Safe Work Permits and Lock-out Tag-out and management of change procedures.
 </li>
 <li>
 Be the first line of response for process emergencies. Execute emergency operating procedures, initiate plant trips if necessary and direct field operators.
 </li>
 <li>
 Monitor status of Safety Instrumented System (SIS) and Fire &amp; Gas Systems. Understand the cause &amp; effect chart for all safety interlocks.
 </li>
 <li>
 Ensure all plant emissions (from reformer stack, vent streams) comply with environmental permits. Properly manage waste streams.
 </li>
 <li>
 Ensure the safety of all operations personnel by utilizing the BHIG Basic Safety Practice program
 
 
 </li>
 </ul>
 
 Technical &amp; Operations
 
 
 
 <ul>
 <li>
 Operate the Steam Methane Reformer based hydrogen plant with CO2 Removal section &amp; CO2 compression, PSA with Tail Gas compression, Membrane Unit and related utilities as prescribed by the Work Instruction Procedures
 </li>
 <li>
 Operate the pipeline network to supply Hydrogen, steam and CO2 to customers&rsquo; pipelines safely and efficiently.
 </li>
 <li>
 Report production progress and plant status to the Shift Supervisor and suggest solutions for any shortfalls. Manage plant production efficiently based on input provided by Plant Management to ensure safety and reliability targets are met to achieve maximum profitability.
 </li>
 <li>
 Ensure BHIG standards, and global best practices for EH&amp;S, productivity, reliability, quality, and overall customer services are met.
 </li>
 <li>
 Meet the customer&rsquo;s requirements regarding safety, reliability, product quality, and flexibility regarding product supply. Maintain customer communications and relationships at the &lsquo;board&rsquo; level, ensuring customer demand rates are satisfied while maximizing the efficiency and profitability of the facility.
 </li>
 <li>
 Follow the Site Work Instruction Manuals for production &amp; supply of Product H2, CO2 &amp; Steam along with other operating and maintenance procedures and checklists to meet the customer&rsquo;s satisfaction with safety, reliability, product quality, and flexibility of product supply while compliance with requirements.
 </li>
 <li>
 Maintain a relationship with the customer&rsquo;s counterparts from other Refinery Units where from BHIG either receiving Feedstock, Utilities &amp; Power or supplying Hydrogen and Steam to different Refinery Units on a regular basis through Refinery Shift Superintendent to ensure alignment of expectations for BHIG and the customers current and future product demand.
 </li>
 <li>
 Constantly monitor all process variables (flows, temperatures, pressures, levels, analytical values) via DCS to ensure they are within defined operating limits.
 </li>
 <li>
 Manipulate control loops, setpoints and cascades to maintain sable operations of all integrated units.
 </li>
 <li>
 Use historical data and trends to predict equipment performance degradation, identify inefficiencies and prevent potential trips and failures.
 </li>
 <li>
 Execute &amp; supervise the detailed start up sequence for the entire plant or individual units/loops form a cold condition, warm condition or hot stand by condition, ensuring a smooth &amp; safe transition to full load normal operations. Assist in the commissioning activities of the facility
 </li>
 <li>
 Maintain constant communication with field operators, providing instructions for equipment adjustments, isolations and rounds.
 </li>
 <li>
 Liaise with the maintenance team to co-ordinate equipment preparation for maintenance (isolation, purging &amp; blinding) and safe taking equipment back in line.
 </li>
 <li>
 Conduct detailed and accurate shift handovers with incoming operators, highlighting any abnormalities, ongoing work and special instruction. Follow shift turnover protocols to ensure a safe and efficient handover to the following shift.
 </li>
 <li>
 Maintain accurate and timely logs of operating parameters, significant events and production data. Fully accountable to ensure his logs and that his operator&rsquo;s logs are accurate and compliant with published matrix.
 </li>
 <li>
 Identify the root cause of process deviations and equipment malfunction. Work with engineers to implement long-term solutions.
 </li>
 <li>
 Suggest and participate in operational improvements and de-bottlenecking projects to enhance safety, reliability and profitability.
 </li>
 <li>
 Ensure compliance with all CM, PM tasks &amp; Environmental Regulatory requirements.
 </li>
 <li>
 Support and prepare for Shutdown Planning and Turnaround Planning.
 </li>
 <li>
 Provide coaching and motivation with the field operations team to achieve operational excellence and customer satisfaction.
 </li>
 <li>
 Establish &amp; maintain close working relationships with engineering and maintenance personnel to continuously monitor &amp; evaluate plant systems &amp; equipment performance.
 </li>
 <li>
 Ensure compliance with process safety, MOC&rsquo;s, and OPHR requirements.
 </li>
 <li>
 Provide operations support and participate in investigations and Root Cause Analysis to identify &amp; implement sustainable corrective actions.
 </li>
 <li>
 Facilitate attainment of operational excellence and customer satisfaction via operations productivity, reliability, quality, and continuous improvement initiatives.
 </li>
 <li>
 Communication of plant activities with other shifts to maintain continuity between shifts for a safe and reliable operation.
 </li>
 <li>
 Execute other duties as assigned by reporting managers in a timely and efficient manner.
 
 
 </li>
 </ul>
 
 Minimum Requirements And Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in chemical, Mechanical, or Chemical Process Operations with 10 years&rsquo; experience preferred. An Associate Technical Degree (2-year certificate) will be considered based on years of experience and competence.
 </li>
 <li>
 Experience in DCS Operation &amp; Field Operation, with minimum of 5 years&rsquo; Lead DCS Operations
 </li>
 <li>
 Experience in SMR based Hydrogen or Ammonia or Methanol or Syngas plant as DCS Operator.
 </li>
 <li>
 Proficiency with DCS platforms (e.g. Yokogawa Centum VP, Siemens PCS 7)
 </li>
 <li>
 Deep understanding of Chemical Engineering Principles, thermodynamics and process control. Wide technical knowledge in operations, engineering, and maintenance activities
 </li>
 <li>
 Ability to maintain high level of awareness and make sound decisions under pressure.
 </li>
 <li>
 Strong problem solving and diagnostic abilities.
 </li>
 <li>
 Clear, concise and effective verbal and written communication. Proficiency in English speaking and writing. Ability to communicate with the customer at the board level daily. Able to communicate between operations and maintenance teams.
 </li>
 <li>
 Deep understanding of Chemical Engineering Principles, thermodynamics and process control
 </li>
 <li>
 A strong commitment to employee involvement, team building and diversity.
 
 
 </li>
 </ul>
 Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what&rsquo;s possible and generate a cleaner future for our customers, our communities, and the world.
 
 
</div>

Lead Operator

<div>At Air Products, we reimagine what&rsquo;s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together &ndash; where every voice is heard and everyone knows they belong and matter &ndash; we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities. 
Reimagine What&rsquo;s Possible 
PURPOSE
To ensure the safe, reliable, efficient and sustainable operations of the BHIG rotating equipment. Managing the rotating maintenance activities with the Planner, Operations, and Engineering teams and is responsible for coordinating, organizing, and executing the PM overhauls and preventative and corrective maintenance activities. The aim is to reduce maintenance related costs while improving plant reliability and availability, in line with business needs for facilities which range across multiple technologies such as Air Separation (ASU), Steam Methane reformer (HYCO), and CO2, along with ancillary equipment to support the facility.
NATURE &amp; SCOPE
The Rotating Equipment Specialist reporting to the Maintenance Manager is accountable for the safe and reliable operations for all the rotating equipment in the JIGH, SATORP and SASREF sites.
The position requires the management of a team of Technicians to achieve a high maintenance standard by providing day-to-day support, safe and effective execution and support the reliable and efficient operation of our rotating equipment. Execute all the preventative and corrective maintenance activities for all sites with the intention of improving the MTBF, MTTR and reliability of the rotating equipment. Lead and co-ordinate the activities with service providers and ensure that all protocols, QCPs and standards are conducted and achieved. Act as an SME for rotating equipment root cause analysis and maintenance strategy development and optimization. Technical report writing and the ability to clearly and articulately explain to Senior Management is a requirement. The coaching and mentoring of the junior Technicians on rotating equipment maintenance practices is required with hands on execution. The position will work closely with both internal and external stakeholders to ensure the scope of work is executed safely and reliably. Ensure that the critical spares have sufficient quantity, refurbished to the correct standard, preserved correctly, and are as specified on delivery.
PRINCIPAL ACCOUNTABILITIES
SAFETY<ul><li>
Provide and maintain a safe work environment.</li><li>
Demonstrate leadership with company and industry safe work practices to prevent injuries.</li><li>
Ensure proper implementation and documentation is maintained for safety related activities.</li><li>
Complete a comprehensive and value-added risk assessment or JSA depending on the risk factor, nature and complexity of the task.</li><li>
Conduct APTs and lead safety investigations and improvements regarding rotating equipment.</li><li>
Ensure compliance from the Maintenance team regarding safe execution promoting a safe work</li></ul>
TECHNICAL<ul><li>
Execute hands on maintenance activities for troubleshooting, maintenance, repair, and test activities.</li><li>
Provide maintenance and technical support during the commissioning of the rotating equipment.</li><li>
Maintain accurate document control and monitor quality assurance initiatives to maintain history.</li><li>
Must be able to read and interpret vibration spectrums.</li><li>
Ensure that all the vibration, temperature and rod drop probes are set correctly and functional.</li><li>
Analyze the process parameters from DCS trends with the intent of predicting future failures and rotating equipment performance.</li><li>
The ability to troubleshoot the root cause of failures based on operating conditions and apply the correct maintenance required.</li><li>
Apply and demonstrate knowledge in both laser and DTI alignment techniques.</li><li>
Ensure that any alignment temperature compensating factors are applied for hot applications.</li><li>
Ensure that holt bolting is applied to piping systems for hot applications.</li><li>
Apply and demonstrate knowledge in measuring out and coaching the team to conduct piston bumping clearance, crank shaft deflection, crankcase deflection, piston run-out corrections, crosshead guide alignment, journal and main bearing to crank shaft clearance measurements.</li><li>
Initiate an inspection program focusing on the critical equipment vibration, temperature and pressure monitoring by completing a daily/weekly inspection sheet. These deviations to be noted and work requests to be created in SAP.</li><li>
Provide maintenance input for scheduled outages to ensure effective planning and execution</li><li>
Assist in the development and execute the preventative / predictive maintenance program to ensure scheduled maintenance activities are completed and remain in compliance.</li><li>
In cooperation with Engineering execute a reliability program to achieve operational excellence by sustaining equipment operation and drive productivity to increase efficiency.</li><li>
Achieve the best MTBF, MTTR and reliability metrics related to rotating equipment.</li><li>
Development of work instructions for ease of reference and execution for the maintenance team.</li><li>
Provide input for the critical spares inventory and follow-up on delivery and lead times.</li><li>
Provide input into the execution plan for the major PM overhauls during the shutdowns and TAR</li><li>
Ensure compliance with the condition monitoring program by following up with Engineering on the trends analysis and corrective actions.</li><li>
To complete technical reports of all major repairs and PM overhauls for critical rotating equipment.</li><li>
To develop a shared folder with all rotating equipment, specifications, spares, special tools, repairs and major overhauls including RCAs and MOCs.</li><li>
To maximize the availability and safety of critical compression assets while minimizing unplanned downtime in production environments.</li><li>
Applying asset management techniques to monitor the integrity of the critical equipment on-line run time by applying condition monitoring techniques for vibration, temperature and packing leakage rates. This information must be logged and analyzed to implement corrective actions before catastrophic failures with the objective of increasing the life cycle of the equipment.</li><li>
Verify and conduct piping strain corrections and confirm that vibration dampeners, supports and grouting are in good condition.</li><li>
Be able to overhaul cryogenic services oxygen pumps and maintain a clean room for oxygen service as part of primary responsibility.</li><li>
Must be able to handle, assemble and install mechanical seals and have the ability to identify the failure modes.</li><li>
Must be able to handle and co-ordinate the removal, installation and repairs to dry gas seals.</li><li>
Must be familiar with the different mechanical seal plans and their required maintenance to ensure the effective function of the mechanical seals.</li><li>
Ensure that the tools, nitrogen and gauge manifolds are available to measure the bladder nitrogen pressure for the pulsation dampeners.</li><li>
Develop a toolbox for each critical equipment ensuring that all the special tools and consumables are available to conduct maintenance. The toolboxes must be repacked and restored with all tools and consumables before placing in the store after each overhaul.</li><li>
Ensure the safety of all maintenance personnel by utilizing the BHIG Basic Safety Practice program, which includes Safety Work Permits, LOTO, Confined Space, etc. The position is a key member in building the Air Products safety culture into the BHIG.</li><li>
Understand Environmental Regulatory requirements and contain all oil spillages and dispose correctly.</li><li>
Ensure Air Products and BHIG standards, and best practices for EH&amp;S, productivity, reliability, quality, and overall customer services are met. In some cases, the safety objectives for SATORP and SASREF will be applicable.</li><li>
Monitor and execute preventative and corrective maintenance activities pertaining to the rotating equipment, to ensure operation and reliability targets are achieved.</li><li>
Maintain equipment maintenance document integrity through accurate technical reports. Ensure that the protocols and QCPs are completed for all rotating equipment overhauls.</li><li>
Supervise and coordinate rotating service providers with all site related activities, ensuring the focus is on quality and reliability.</li><li>
Coordinating with the operations and engineering teams to rectify rotating equipment issues and implementing cost effective solutions.</li><li>
Achieve and maintain operations excellence and customer satisfaction through maintenance productivity, reliability, quality, and cost reduction efforts.</li><li>
Provide maintenance support and participate in incident investigations and root cause analysis. Identify and implement sustainable corrective action(s).</li><li>
Leading the rotating activities during turnarounds (TAR), including, preparation of job packages, spares and materials, contractors and tools and safety management during execution.</li><li>
Support on-call activities when required and help with rotating recommendations outside of normal working hours when consulted.</li></ul>
MINIMUM REQUIREMENTS AND QUALIFICATIONS<ul><li>
Must have at least 15 years demonstrated competency in oil and gas industry on rotating equipment which includes reciprocating, centrifugal, screw, lobe and diaphragm compressors.</li><li>
Must have demonstrated knowledge and experience in oil and gas industry of leading reciprocating, centrifugal and screw compressor overhauls.</li><li>
Must have hands-on experience working with reciprocating compressors and pump overhauls.</li><li>
Must have knowledge and be able to overhaul cryogenic pumps especially in oxygen service, centrifugal pumps, positive displacement pumps, high‑speed integral pumps (e.g., Sundyne LMV models), screw, gear, and dosing pumps.</li><li>
Must be able to understand, apply and achieve all the reliability metrics regarding rotating equipment.</li><li>
Must have at least 10 years&rsquo; experience in a Leadership, Supervisory and Management role in therotating equipment maintenance environment.</li><li>
A bachelor&rsquo;s degree or equivalent in mechanical engineering or maintenance management in rotating equipment is desirable.</li><li>
Vibration level 1 and 2 certification will be advantageous.</li><li>
Must be able to manage a team&rsquo;s development ensuring that proper IDPs are in place, implemented and monitored to improve the team&rsquo;s rotating equipment knowledge and competence.</li><li>
Must be able to coach and mentor the team by leading the equipment overhauls and ensuring effective knowledge transfer.</li><li>
Must be able to performance manage a team to encourage and ensure a high-performance culture</li><li>
Strong organizational, planning, scheduling, interpersonal and communication skills are essential.</li><li>
Must be able to coordinate and communicate across functions to ensure alignment with business objectives.</li><li>
Proficiency in speaking, reading and writing in English.</li><li>
Knowledge and understanding of local environmental and health and safety requirements.</li><li>
Knowledge of service provider contracts and technical support in the region is desirable.</li></ul>
#LI-LG1 
Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what&rsquo;s possible and generate a cleaner future for our customers, our communities, and the world.</div>

Maintenance Rotating Equipment Superintendent

<div>At Air Products, we reimagine what&rsquo;s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together &ndash; where every voice is heard and everyone knows they belong and matter &ndash; we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities. 
Reimagine What&rsquo;s Possible<h2 class="jobSectionHeader"> 
ABOUT THE COMPANY:</h2><div>
BHIG&mdash;Blue Hydrogen Industrial Gases is a regional development and investment joint venture (JV) between Saudi Aramco and Air Products Qudra &ldquo;APQ&rdquo;. Our company benefits from the combined strengths of two leading entities. BHIG is positioned to drive industrial innovation and operational excellence across Saudi Arabia and the region. BHIG focuses on supporting clean energy goals through low-carbon hydrogen production. 
 
Reimagine What&rsquo;s Possible
 
 
The HYCO Lead Operator, reporting to the HYCO Shift Supervisor, is accountable for the day-to-day DCS &amp; Field Operation of HYCO facility, ensuring the production requirements set by the customer are achieved. HYCO Lead Operator is responsible for the safe, efficient and stable operation of the entire Hydrogen Manufacturing Unit from a centralized control room using DCS. This includes monitoring, controlling and optimizing to meet production targets, quality specifications and environmental regulations. This includes actively supporting plant performance, process optimization and production stability while maintaining strong focus on safety &amp; compliance. The HYCO Lead Operator will execute daily tasks which include preparing and implementing safety work permits, LOTO, completing operations preventative maintenance activities, and assist the maintenance and engineering teams in preparing and executing corrective maintenance activities. Lead operator will handle the Shift lead responsibility in absence of Shift supervisor ensuring the business continuity. 
PRINCIPAL ACCOUNTABILITIES: 
 
Safety, Health &amp; Environment<ul><li>
Maintain a safe &amp; stable environment. Demonstrate leadership with all Company &amp; Industry safe work processes to prevent all injuries. Ensure proper documentation is maintained for safety related activities.</li><li>
Enforce and adhere to all Safe Work Permits and Lock-out Tag-out and management of change procedures.</li><li>
Be the first line of response for process emergencies. Execute emergency operating procedures, initiate plant trips if necessary and direct field operators.</li><li>
Monitor status of Safety Instrumented System (SIS) and Fire &amp; Gas Systems. Understand the cause &amp; effect chart for all safety interlocks.</li><li>
Ensure all plant emissions (from reformer stack, vent streams) comply with environmental permits. Properly manage waste streams.</li><li>
Ensure the safety of all operations personnel by utilizing the BHIG Basic Safety Practice program 
</li></ul>
Technical &amp; Operations<ul><li>
Operate the Steam Methane Reformer based hydrogen plant with CO2 Removal section &amp; CO2 compression, PSA with Tail Gas compression, Membrane Unit and related utilities as prescribed by the Work Instruction Procedures</li><li>
Operate the pipeline network to supply Hydrogen, steam and CO2 to customers&rsquo; pipelines safely and efficiently.
</li><li>Report production progress and plant status to the Shift Supervisor and suggest solutions for any shortfalls. Manage plant production efficiently based on input provided by Plant Management to ensure safety and reliability targets are met to achieve maximum profitability.</li><li>
Ensure BHIG standards, and global best practices for EH&amp;S, productivity, reliability, quality, and overall customer services are met.</li><li>
Meet the customer&rsquo;s requirements regarding safety, reliability, product quality, and flexibility regarding product supply. Maintain customer communications and relationships at the &lsquo;board&rsquo; level, ensuring customer demand rates are satisfied while maximizing the efficiency and profitability of the facility.</li><li>
Follow the Site Work Instruction Manuals for production &amp; supply of Product H2, CO2 &amp; Steam along with other operating and maintenance procedures and checklists to meet the customer&rsquo;s satisfaction with safety, reliability, product quality, and flexibility of product supply while compliance with requirements.</li><li>
Maintain a relationship with the customer&rsquo;s counterparts from other Refinery Units where from BHIG either receiving Feedstock, Utilities &amp; Power or supplying Hydrogen and Steam to different Refinery Units on a regular basis through Refinery Shift Superintendent to ensure alignment of expectations for BHIG and the customers current and future product demand.</li><li>
Constantly monitor all process variables (flows, temperatures, pressures, levels, analytical values) via DCS to ensure they are within defined operating limits.</li><li>
Manipulate control loops, setpoints and cascades to maintain sable operations of all integrated units.</li><li>
Use historical data and trends to predict equipment performance degradation, identify inefficiencies and prevent potential trips and failures.</li><li>
Execute &amp; supervise the detailed start up sequence for the entire plant or individual units/loops form a cold condition, warm condition or hot stand by condition, ensuring a smooth &amp; safe transition to full load normal operations. Assist in the commissioning activities of the facility</li><li>
Maintain constant communication with field operators, providing instructions for equipment adjustments, isolations and rounds.</li><li>
Liaise with the maintenance team to co-ordinate equipment preparation for maintenance (isolation, purging &amp; blinding) and safe taking equipment back in line.</li><li>
Conduct detailed and accurate shift handovers with incoming operators, highlighting any abnormalities, ongoing work and special instruction. Follow shift turnover protocols to ensure a safe and efficient handover to the following shift.</li><li>
Maintain accurate and timely logs of operating parameters, significant events and production data. Fully accountable to ensure his logs and that his operator&rsquo;s logs are accurate and compliant with published matrix.</li><li>
Identify the root cause of process deviations and equipment malfunction. Work with engineers to implement long-term solutions.</li><li>
Suggest and participate in operational improvements and de-bottlenecking projects to enhance safety, reliability and profitability.</li><li>
Ensure compliance with all CM, PM tasks &amp; Environmental Regulatory requirements.</li><li>
Support and prepare for Shutdown Planning and Turnaround Planning.</li><li>
Provide coaching and motivation with the field operations team to achieve operational excellence and customer satisfaction.</li><li>
Establish &amp; maintain close working relationships with engineering and maintenance personnel to continuously monitor &amp; evaluate plant systems &amp; equipment performance.</li><li>
Ensure compliance with process safety, MOC&rsquo;s, and OPHR requirements.</li><li>
Provide operations support and participate in investigations and Root Cause Analysis to identify &amp; implement sustainable corrective actions.</li><li>
Facilitate attainment of operational excellence and customer satisfaction via operations productivity, reliability, quality, and continuous improvement initiatives.</li><li>
Communication of plant activities with other shifts to maintain continuity between shifts for a safe and reliable operation.</li><li>
Execute other duties as assigned by reporting managers in a timely and efficient manner.</li></ul> 
MINIMUM REQUIREMENTS AND QUALIFICATIONS:<ul><li>
Bachelor&rsquo;s degree in chemical, Mechanical, or Chemical Process Operations with 10 years&rsquo; experience preferred. An Associate Technical Degree (2-year certificate) will be considered based on years of experience and competence.</li><li>
Experience in DCS Operation &amp; Field Operation, with minimum of 5 years&rsquo; Lead DCS Operations
</li><li>Experience in SMR based Hydrogen or Ammonia or Methanol or Syngas plant as DCS Operator.</li><li>
Proficiency with DCS platforms (e.g. Yokogawa Centum VP, Siemens PCS 7)</li><li>
Deep understanding of Chemical Engineering Principles, thermodynamics and process control. Wide technical knowledge in operations, engineering, and maintenance activities</li><li>
Ability to maintain high level of awareness and make sound decisions under pressure.</li><li>
Strong problem solving and diagnostic abilities.</li><li>
Clear, concise and effective verbal and written communication. Proficiency in English speaking and writing. Ability to communicate with the customer at the board level daily. Able to communicate between operations and maintenance teams.</li><li>
Deep understanding of Chemical Engineering Principles, thermodynamics and process control</li><li>
A strong commitment to employee involvement, team building and diversity.</li></ul>
#LI-LG1</div> 
Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what&rsquo;s possible and generate a cleaner future for our customers, our communities, and the world.</div>

Join Air Products and explore 22   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

Air Products

About Company

Senior Principal Engineer - Electrical

Assistant Site Manager

HYCO Operator

Field Operator

Lead Operator

Maintenance Rotating Equipment Superintendent

Lead Operator