Urwah Admin

Dar Al Riyadh

<div>The Technical Design Department Manager will lead the Design Office operations across Riyadh, Khobar, Egypt, and the Philippines, ensuring effective coordination between all engineering disciplines and the timely delivery of high-quality design projects. The role oversees resource planning, design governance, multidisciplinary coordination, and operational excellence while working closely with all Discipline Heads. 
 
Key Responsibilities:
<ul><li>Manage the overall operations of the Design Office across all regional offices.
</li><li>Coordinate and integrate the work of all Discipline Heads (Architecture, Structural, Civil, MEP, Infrastructure, BIM, etc.).
</li><li>Ensure timely delivery of design projects in line with quality, budget, and schedule requirements.
</li><li>Monitor resource utilization and optimize workload distribution across offices.
</li><li>Establish and enforce engineering standards, design procedures, and QA/QC processes.
</li><li>Lead multidisciplinary design coordination meetings and resolve technical issues.
</li><li>Drive continuous improvement, digital engineering, and BIM initiatives.
</li><li>Prepare management reports, resource forecasts, and performance dashboards for senior leadership.
</li></ul>Qualifications:
<ul><li>Bachelor's degree in Engineering or Architecture (Master's degree preferred).
</li><li>20+ years of experience in multidisciplinary engineering design consultancy.
</li><li>Minimum 8&ndash;10 years in a leadership role managing large Design Offices.
</li><li>Proven experience coordinating multiple engineering disciplines and international design teams.
</li><li>Strong leadership, stakeholder management, and project delivery skills.
</li></ul>Key Competencies:
<ul><li>Design Office Management
</li><li>Multidisciplinary Coordination
</li><li>Design Delivery &amp; Resource Planning
</li><li>Technical Governance &amp; QA/QC
</li><li>BIM &amp; Digital Engineering
</li><li>Leadership &amp; Stakeholder Management
</li><li>Strategic Planning &amp; Performance Management</li></ul></div>

Technical Design Department Manager

<div>Responsibilities:
<ul><li>Lead the project controls &amp; Document Control staff for efficient project control delivery.
</li><li>Prepares the Project Controls plan for assigned projects.
</li><li>Provide oversight and review of the Consultant&rsquo;s planning and scheduling of the assigned projects including Consultant staff plans and manpower histograms and project progress measurement, etc.
</li><li>Responsible for effective execution of Project Controls programs on the assigned program in accordance with Project Controls Department Procedures.
</li><li>Reviews contract drafts to ensure they include adequate cost and scope definition and meet Project Controls requirements. Coordinates development of all data in support of negotiations.
</li><li>Apply all planning and scheduling techniques as appropriate in accordance with the approved Project Controls/Execution Plan.
</li><li>Ensure that the Project Controls Systems provide the best possible control tools for the supervisory staff on the project to allow them to control their work efficiently
</li><li>Lead the process of capital budget determination and the effective determination of the scope of work accordingly.
</li><li>Maintain up-to-date knowledge of planning software and techniques as used on the contract and ensure as well that the staff maintain their skill and knowledge
</li><li>Ensure that the Department Manager, project manager, and other stakeholders are aware of any potential threats to completion on schedule, and propose remedial action
</li><li>Prepare internal and client weekly and monthly project status reports
</li><li>Review of Engineering Consultants&rsquo; schedules and programs
</li><li>Develop a staffing plan and execution for the project organization to ensure the resource is available
</li><li>Prepares, coordinates, and directs Project Controls presentations to client management, as required.
</li><li>Directs project control activities. Develops, interprets, and executes policy, objectives, and standards applicable to cost and schedule control and analysis activities.
</li><li>Appraise performance of subordinates and identify/implement training and development needs
</li>Establish and promote good working relations with his team, project staff, and the client 
<li>
</li></ul>Requirements:
<ul><li>Bachler degree on Civil Engineering.
</li><li>Minimum 10 years overall experience in a related filed
</li><li>Registered engineer with the Saudi Council of Engineers
</li><li>Preferred Certificated Project Management Professional (PMP or Prince 2)
</li><li>Knowledge of computer programs for Planning &amp; Scheduling (Primavera, MS Project
</li><li>Advanced knowledge of computer programs for project management, preferably including Microsoft Project, Primavera, MS office, Power BI
</li><li>Analyze Projects performance and prepare reports highlighting all the potential risk and issues with project and recommend suitable solutions.
</li><li>Excellent oral, analysis and presentation skills are required in performance of this position.
</li><li>Knowledge of Quality Management Systems and Quality Control procedures.
</li><li>Systematic thinking, Planning and organization skills.
</li><li>Communication, Project management and Problem-solving skills.
</li><li>Fluent in both written and spoken Arabic and English.</li></ul></div>

Planning Scheduler Engineer

<div>Responsibilities: 
<ul><li>Implement processes and procedures of the engineering standards.
</li><li>Evaluate the current technical standards available within the government en ti ty and obtain approval for the list of current technical standards, whether to con ti nue working with them or modify them, or develop new technical standards.
</li><li>Study and review plans, documents, and bidding documents provided by various design companies for projects of the Saudi Irriga ti on Authority (SIO), following the applicable standards and codes.
</li><li>Par ti cipate in preparing technical specifica ti ons, quan ti ty schedules, and tender documents for the projects undertaken by the SIO in the field of implemen ti ng pumping sta ti ons and water treatment pipelines. Also, review all tender documents and evaluate the technical proposals submitted by consultants and contractors un ti l the contract award for these projects is completed.
</li><li>Study the technical submissions from consultants and contractors and provide technical support to the SIO, along with appropriate recommenda ti ons regarding execu ti on methods, materials, and samples men ti oned in the terms, specifica ti ons, and quan ti ty schedules.
</li><li>Provide technical opinions in any disputes that arise between the SIO and contractors, offering advice and guidance to the client to clarify the correct posi ti on and enable the SIO to follow up on the matter.
</li><li>Review and audit the final project drawings as executed and submitted to the client.
 </li>Participate in value engineering workshops for projects of the SIO to achieve maximum benefit from the projects with the highest quality and lowest cost. 
<li>
</li></ul>Essential Requirements: 
<ul><li>Bachelor&rsquo;s degree in civil engineering.
</li><li>Minimum 15 years of professional experience in a related role, with previous experience in PMC or PMO projects preferred.
</li><li>Extensive experience in applying engineering standards in government projects.
</li><li>Strong knowledge of technical standards and regula ti ons.
</li><li>Exper ti se in implemen ti ng design standards and specifica ti ons.
</li><li>Skilled in reviewing plans and bidding documents.
</li><li>Ability to prepare technical specifica ti ons and tender documents.
</li><li>Excellent problem-solving and communica ti on skills.
</li><li>Detail-oriented with a focus on reviewing project drawings.
</li><li>Familiarity with value engineering principles.</li></ul></div>

Structural Design Engineer

<div>Responsibilities:
<ul><li>Undertake overview supervision duties on site to ensure general compliance of the works with shop drawings, specification and contract requirements and when necessary cause to address deficiencies associate with the same.
</li><li>Coordinate all aspects of submittals, review and approvals against contract requirements and when applicable report and advise on deviations from the same.
</li><li>Report on a daily basis to the Site Civil Engineer on all activities occurred on site.
</li><li>Assist the Senior Civil Engineer in all aspects of the final Acceptance of the work and close-out all applicable contracts related to the same.
</li><li>Coordinate with the team on site to ensure that contractual obligations are met.
</li><li>Gives clear, concise and understandable instructions to Contractors to avoid abortive works and errors. Follows up with Staff to ensure compliance with requirements.
 </li>Prepare Snag Lists and follow up remedial works until works found satisfactory. 
<li>
</li></ul>Requirements:
<ul><li>Diploma in Civil with total 5 Years of experience including 3 years in Infrastructural Projects
</li><li>Should be organized and systematic towards work and be able to work independently with minimum supervisions.
</li><li>Middle East &amp; Saudi Arabia experience is a plus
</li><li>Strong knowledge of infrastructure
</li><li>Strong safety background
</li><li>Strong in all construction disciplines with the knowledge of &ldquo;HOW TO&rsquo;
</li><li>Driving license</li></ul></div>

Senior Environmental Inspector

<div>Responsibilities:
<ul><li>Lead the design, development, and implementation of mechanical systems and components for the infrastructure project.
</li><li>Collaborate with other engineering disciplines to ensure the integration of mechanical systems with overall project requirements.
</li><li>Conduct feasibility studies and risk assessments related to mechanical systems and components.
</li><li>Provide technical expertise and guidance to project team members and stakeholders.
</li><li>Oversee the procurement, installation, and commissioning of mechanical equipment and systems.
</li><li>Develop and implement quality control procedures to ensure the reliability and safety of mechanical systems.
</li><li>Manage and coordinate with external vendors, contractors, and consultants involved in the mechanical aspects of the project.
</li><li>Review and approve mechanical engineering designs, specifications, and documentation.
</li></ul>Essential Requirements:
<ul><li>Bachelor's degree in Mechanical Engineering or related field. Master's degree or higher preferred.
</li><li>Professional Engineer (PE) license preferred.
</li><li>A minimum of 15 years of experience in mechanical engineering, with a proven track record of working on large-scale infrastructure projects.
</li><li>Extensive knowledge of mechanical engineering principles, standards, and practices.
</li><li>Proficiency in CAD software and other relevant engineering tools.
</li><li>Strong project management and communication skills.
</li><li>Ability to work effectively within a multidisciplinary team and manage multiple priorities.
</li><li>Thorough understanding of relevant industry regulations and codes.</li></ul></div>

Lead Senior Mechanical Engineer

<div>Responsibilities:
<ul><li>Collaborate with the project team to integrate agricultural and environmental considerations into the design of the steel structure building.
</li><li>Evaluate and propose agricultural systems that align with the project's goals and environmental sustainability.
</li><li>Conduct comprehensive soil analysis to determine its suitability for farming and landscaping around the building.
</li><li>Implement soil management strategies for optimum land use and fertility enhancement.
</li><li>Design and implement efficient irrigation systems to support landscaping and agricultural components of the project.
</li><li>Propose water conservation strategies and water management techniques suitable for the project's landscape.
</li><li>Identify and select plants, trees, and greenery that align with the project's aesthetic and environmental objectives.
</li><li>Advise on environmentally friendly practices and technologies to support the project's sustainability goals.
</li><li>Develop strategies for ecological preservation and biodiversity enhancement within the project scope.
</li><li>Work closely with architects, structural engineers, and landscape designers to integrate agricultural components seamlessly into the overall project design.
 </li>Coordinate with construction supervision teams to ensure the successful implementation of agricultural elements during the construction phase. 
<li>
</li></ul>Essential Requirements:
<ul><li>Bachelor's degree in Agricultural Engineering or related field.
</li><li>10+ experience in agricultural engineering, preferably in construction supervision projects.
</li><li>Strong knowledge of soil science, water management, and irrigation systems.
</li><li>Familiarity with environmental sustainability practices in agriculture.
</li><li>Excellent communication skills and ability to work in a multidisciplinary team.
</li><li>Certification or licensure as a Professional Engineer (PE) is a plus.</li></ul></div>

Agriculture Engineer

<div>We are seeking an experienced Electrical Inspector with years of expertise in electrical inspections and compliance. The successful candidate will play a crucial role in ensuring that electrical systems meet regulatory standards, project specifications, and industry best practices. 
Responsibilities:
<ul><li>Conduct thorough inspections of electrical installations to ensure compliance with local regulations, national codes, and project specifications.
</li><li>Verify that work is carried out in accordance with approved electrical designs.
</li><li>Implement and maintain quality control processes to ensure the integrity of electrical systems.
</li><li>Identify and address any deviations from approved plans.
</li><li>Create detailed inspection reports outlining findings, deviations, and corrective actions.
</li><li>Maintain accurate and organized records of inspections.
</li><li>Collaborate with electrical contractors, project managers, and other stakeholders to facilitate efficient inspections.
</li><li>Provide guidance on meeting electrical requirements during construction.
</li><li>Oversee electrical testing and commissioning activities to ensure proper functionality of systems.
</li><li>Verify the performance of electrical components and equipment.
</li><li>Ensure that all electrical work meets safety standards and regulations.
</li><li>Identify and address safety hazards related to electrical installations.
</li><li>Communicate inspection results to clients, project teams, and relevant authorities.
</li><li>Provide guidance on addressing any non-compliance issues.
</li><li>Stay updated on industry trends, electrical codes, and emerging technologies.
</li>Recommend improvements to enhance the efficiency and safety of electrical installations. 
<li>
</li></ul>Minimum Requirements:
<ul><li>Bachelor or Diploma in Electrical Engineering.
</li><li>Minimum of 5 years of experience as an Electrical Inspector, with a focus on construction projects.
</li><li>In-depth knowledge of electrical codes, regulations, and industry standards.
</li><li>Strong analytical and problem-solving skills.
</li><li>Excellent communication and interpersonal skills.
</li><li>Proficient in using electrical testing equipment.
</li><li>Professional certification as an Electrical Inspector.
</li><li>Experience with a variety of electrical systems, including commercial, residential, and industrial projects.</li></ul></div>

Electrical Inspector

Join Dar Al Riyadh and explore 7   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.