Qureos Mentor

Diyar Alwatan Trading & Contracting Company (DACO)

Job Title: Survey EngineerNationality: Saudi NationalQualification:<ul><li>Bachelor&rsquo;s Degree in Surveying Engineering or a related field</li></ul>Experience:<ul><li>Minimum 8 years of experience in construction and engineering projects</li><li>At least 5 years of proven experience in surveying works</li><li>Prior experience on high-rise towers, shopping malls, or large administrative/commercial buildings is highly preferred</li></ul>Key Responsibilities:<ul><li>Perform land and construction surveys using approved surveying instruments and methodologies</li><li>Establish and verify control points, benchmarks, and reference levels</li><li>Conduct land and construction surveys and analyze collected data accurately</li><li>Utilize modern surveying equipment, instruments, and techniques</li><li>Prepare technical survey reports, drawings, and maps in accordance with project requirements</li><li>Ensure survey activities comply with approved standards and specifications</li><li>Ensure accurate setting out for structural, architectural, and infrastructure works</li><li>Prepare and review survey drawings, reports, and as-built documentation</li><li>Coordinate with project engineers, consultants, and site teams to ensure compliance with design and specifications</li><li>Monitor survey accuracy and resolve any discrepancies on site</li><li>Support quantity calculations and measurement verification as required</li></ul>Skills &amp; Competencies:<ul><li>Proficient in AutoCAD, surveying software, and quantity calculation tools</li><li>Strong knowledge of construction surveying standards and procedures</li><li>Excellent attention to detail and problem-solving skills</li><li>Professional proficiency in Arabic and English (spoken and written)</li><li>Ability to work independently and as part of a multidisciplinary project team</li></ul>Benefits:<ul><li>Professional and supportive work environment</li><li>Opportunities for continuous learning and professional development</li><li>Attractive salary package with additional benefits, in accordance with company policy</li></ul>Job Type: Full-timeWork Location: In person

Survey Engineer, Saudi National

Job Title: Skid Construction EngineerDepartment: ConstructionReports To: Construction ManagerJob Purpose:To supervise the site installation, erection, and integration of emergency loading skids, ensuring safe execution, compliance with Saudi Aramco standards, and adherence to the approved project schedule.<ul><li>Manage and supervise on-site installation and erection of skid packages</li></ul><ul><li>Prepare, review, and execute construction method statements and lifting plans</li></ul><ul><li>Coordinate crane operations, rigging activities, and lifting sequences</li></ul><ul><li>Ensure full compliance with Saudi Aramco construction, lifting, and safety standards</li></ul><ul><li>Interface and coordinate with civil, electrical, and instrumentation teams to ensure smooth execution</li></ul><ul><li>Monitor daily site activities and report progress to the Construction Manager</li></ul><ul><li>Ensure work is executed in accordance with approved drawings, procedures, and schedules</li></ul>Key Skills &amp; Competencies:<ul><li>Strong understanding of construction and lifting safety requirements</li></ul><ul><li>Excellent coordination and site management skills</li></ul><ul><li>Ability to work effectively with multidisciplinary teams</li></ul><ul><li>Strong problem-solving and decision-making abilities</li></ul><ul><li>Good communication skills in English (Arabic is an advantage)</li></ul>Qualifications &amp; Experience:<ul><li>Bachelor&rsquo;s Degree in Mechanical Engineering / Construction Engineering</li></ul><ul><li>Minimum 8 years of construction experience in oil &amp; gas or industrial projects</li></ul><ul><li>Strong knowledge of lifting operations, skid installation, and heavy equipment handling</li></ul><ul><li>Experience working on Saudi Aramco projects is highly preferred</li></ul>Job Type: Full-timePay: From ﷼5,000.00 per monthWork Location: In person

Skid Construction Engineer

Job Title: Piping EngineerProject: Procure, Supply, Fabrication, Installation &amp; Commissioning of Emergency Loading / Unloading SkidsRole Overview:The Piping Engineer will be responsible for the complete design, engineering, and technical integrity of process piping systems for loading and unloading skids, ensuring full compliance with Saudi Aramco standards, international codes, and NJBP operational requirements.Detailed Scope of Responsibility:Design &amp; Engineering<ul><li>Perform detailed design and engineering of process piping systems for skid-mounted fuel handling facilities</li><li>Select piping materials suitable for petroleum products and Jet-A, considering pressure, temperature, corrosion, and safety requirements</li><li>Ensure compliance with:</li><li>SAES-P-100 / SAES-P-111</li><li>ASME B31.3</li><li>SAES-M-200 (Materials)</li></ul>Piping Layout Development<ul><li>Develop piping layouts with strong focus on:</li><li>Proper drainability and venting</li><li>Elimination of dead legs</li><li>Correct sloping, flexibility, and thermal expansion control</li><li>Adequate accessibility for operation, inspection, and maintenance</li><li>Coordinate piping routing with structural, civil, electrical, and instrumentation disciplines</li></ul>Valves &amp; Specialty Items<ul><li>Select and specify valves including:</li><li>Emergency Shut Down (ESD) valves</li><li>Double Block &amp; Bleed (DBB) valves</li><li>Ball valves, check valves, and control valves</li><li>Specify strainers, filters, expansion joints, hoses, and special fittings as required</li></ul>Stress Analysis &amp; Technical Support<ul><li>Identify piping systems requiring stress analysis</li><li>Coordinate with stress engineers and review stress analysis reports</li><li>Ensure flexibility and support philosophy complies with Aramco standards</li></ul>Key Engineering Deliverables:<ul><li>Piping layout drawings</li><li>Isometric drawings (shop and field)</li><li>Line list and valve list</li><li>Material Take-Off (MTO)</li><li>Piping material specifications and class sheets</li><li>Pressure testing packages (hydrostatic and pneumatic)</li><li>Flushing, cleaning, and drying procedures</li><li>Engineering change notices (ECN)</li><li>As-built drawings and final documentation</li></ul>Construction, Commissioning &amp; Handover:<ul><li>Provide technical support during fabrication, installation, and site erection</li><li>Participate in pre-commissioning and commissioning activities, including pressure testing and system handover</li><li>Support final acceptance and close-out documentation in coordination with Aramco and NJBP teams</li></ul>Qualifications &amp; Experience:<ul><li>Bachelor&rsquo;s Degree in Mechanical or Piping Engineering</li><li>Minimum 8&ndash;10 years of piping engineering experience</li><li>Proven experience on Saudi Aramco projects is mandatory</li><li>Strong experience in skid-mounted systems, fuel handling, and terminal facilities</li><li>Familiarity with Aramco approval processes, document control, and audits</li></ul>Key Skills &amp; Competencies:<ul><li>Strong knowledge of Saudi Aramco piping standards</li><li>Proficiency in AutoCAD, piping design tools, and isometric software</li><li>Solid understanding of process design and piping hydraulics</li><li>Excellent coordination and multidisciplinary interface skills</li><li>Strong problem-solving and technical decision-making abilities</li><li>Effective communication skills in English (Arabic is an advantage)</li><li>Transferable Iqama</li></ul>Job Type: Full-timeWork Location: In person

Piping Engineer

Job Title: Mechanical EngineerRole Overview:The Mechanical Engineer will be responsible for the selection, installation, testing, and commissioning of mechanical equipment for emergency loading and unloading skids, ensuring full compliance with Saudi Aramco standards, international codes, and NJBP operational requirements.Scope of Responsibility:Mechanical Equipment Engineering<ul><li>Select, install, and commission mechanical components including:</li><li>Pumps</li><li>Loading arms and/or hoses</li><li>Strainers and filters</li><li>Pressure relief valves and safety devices</li><li>Ensure all mechanical equipment is suitable for hazardous area classification and certified accordingly</li><li>Ensure compliance with applicable standards and codes including:</li><li>SAES-B-017, API 610 / API 676 (pumps) , API RP 1004 (loading and unloading systems)</li></ul>Installation &amp; Testing<ul><li>Supervise and perform:</li><li>Equipment alignment (laser/dial methods)</li><li>Installation and leveling</li><li>Mechanical testing and functional checks</li><li>Verify installation in accordance with approved drawings and vendor requirements</li></ul>Key Deliverables:<ul><li>Mechanical equipment data sheets</li><li>Installation and method statements</li><li>Mechanical inspection and test reports</li><li>Pre-commissioning and pre-startup checklists</li><li>Commissioning and start-up support documentation</li><li>As-built mechanical documentation</li></ul>Key Skills &amp; Competencies:<ul><li>Strong knowledge of Saudi Aramco mechanical standards</li><li>Experience with hazardous area equipment selection and installation</li><li>Proficiency in interpreting mechanical, piping, and vendor drawings</li><li>Strong coordination with piping, electrical, instrumentation, and HSE teams</li><li>Excellent troubleshooting and problem-solving skills</li><li>Effective communication skills in English (Arabic is an advantage)</li><li>Bachelor&rsquo;s Degree in Mechanical Engineering</li><li>Minimum 8&ndash;10 years of experience in oil &amp; gas or fuel handling projects</li><li>Strong experience with pumps, loading arms, and skid-mounted packages</li><li>Familiarity with Aramco approval, inspection, and commissioning processes</li><li>Proven experience working on Saudi Aramco projects</li><li>Strict adherence to approved Aramco standards and NJBP operational requirements</li><li>Participate in pre-commissioning, commissioning, and handover activities</li><li>Support final acceptance and project close-out documentation</li></ul>Job Type: Full-timePay: From ﷼5,000.00 per monthWork Location: In person

Mechanical Engineer

Job Title: Instrument EngineerDepartment: InstrumentationReports To: Engineering ManagerJob PurposeTo design, engineer, install, test, and commission instrumentation and control systems ensuring safe, reliable, and efficient skid-mounted and plant operations in compliance with international and Saudi Aramco standards.Key Responsibilities<ul><li>Prepare and review instrument index, datasheets, loop diagrams, hook-up drawings, and cable schedules</li></ul><ul><li>Supervise installation and commissioning of field instruments including flow, pressure, level, and temperature transmitters</li></ul><ul><li>Perform calibration, loop checking, functional testing, and troubleshooting of instruments</li></ul><ul><li>Integrate field instruments with PLC, DCS, ESD, and interlock systems</li></ul><ul><li>Coordinate with electrical, mechanical, and process teams during project execution</li></ul><ul><li>Review vendor drawings, technical submittals, and material specifications</li></ul><ul><li>Ensure compliance with SAES-L, IEC, ISA, and project-specific standards</li></ul><ul><li>Support FAT, SAT, and site commissioning activities</li></ul><ul><li>Prepare commissioning reports, test records, and as-built documentation</li></ul><ul><li>Ensure all work is executed in line with HSE requirements and company procedures</li></ul>Required Skills &amp; Competencies<ul><li>Strong knowledge of instrumentation systems and control philosophies</li></ul><ul><li>Hands-on experience with calibration tools and testing equipment</li></ul><ul><li>Ability to read and interpret P&amp;IDs, control narratives, and wiring diagrams</li></ul><ul><li>Familiarity with Saudi Aramco engineering standards and documentation</li></ul><ul><li>Good problem-solving and troubleshooting skills</li></ul><ul><li>Strong communication and coordination abilities</li></ul>Qualifications &amp; Experience<ul><li>Bachelor&rsquo;s Degree in Instrumentation Engineering or Electrical Engineering</li></ul><ul><li>Minimum 7&ndash;9 years of relevant instrumentation experience</li></ul><ul><li>Saudi Aramco project experience is highly preferred</li></ul><ul><li>Experience in skid-mounted systems, oil &amp; gas, or industrial projects is an advantage</li></ul>Employment Details<ul><li>Contract Type: Project / Long-term (as applicable)</li></ul><ul><li>Joining: Immediate or short notice preferred</li></ul>Job Type: Full-timeWork Location: In person

Instrument Engineer

Job Title: Fabrication EngineerProject: Procure, Supply, Fabrication, Installation &amp; Commissioning of Emergency Loading / Unloading SkidsLocation: North Jeddah Bulk Plant (NJBP) &ndash; Saudi AramcoRole Overview:The Fabrication Engineer will be responsible for managing and supervising skid fabrication activities at the workshop, ensuring full compliance with Saudi Aramco standards, approved drawings, quality requirements, and project specifications.Scope of Responsibility:<ul><li>Manage skid fabrication in workshop in compliance with Aramco requirements.</li><li>Ensure fabrication quality as per:</li><li>SAES-W (Welding)</li><li>SAES-M-004</li><li>AWS D1.1 / ASME IX</li><li>Supervise welding, cutting, fit-up, blasting, painting, and assembly.</li><li>Coordinate with QC and inspectors for hold points and inspections.</li></ul>Deliverables:<ul><li>Fabrication drawings</li><li>Welding Procedure Specification (WPS)</li><li>Procedure Qualification Records (PQR)</li><li>Welder Qualification Records (WQTR)</li><li>Fabrication inspection checklists</li><li>Surface preparation &amp; painting reports</li></ul>Key Skills &amp; Competencies:<ul><li>Strong knowledge of Saudi Aramco welding and fabrication standards</li><li>Bachelor&rsquo;s Degree in Mechanical / Fabrication / Welding Engineering</li><li>Minimum 8&ndash;10 years of fabrication experience in oil &amp; gas or industrial projects</li><li>Strong experience in skid-mounted packages and workshop fabrication</li><li>Hands-on knowledge of Aramco inspection and approval processes</li><li>Expertise in welding processes, material control, and fabrication sequencing</li><li>Ability to read and interpret fabrication, piping, and structural drawings</li><li>Excellent coordination with QC, inspection, and project teams</li><li>Strong leadership, problem-solving, and quality management skills</li><li>Effective communication skills in English (Arabic is an advantage)</li><li>Proven experience working on Saudi Aramco projects</li><li>Strict adherence to approved Aramco standards and NJBP operational requirements</li><li>Participate in pre-commissioning, commissioning, and handover activities</li><li>Support final acceptance and project close-out documentation</li></ul>Job Type: Full-timePay: From ﷼5,000.00 per monthWork Location: In person

Fabrication Engineer

Job Title: Engineering &amp; Design Engineer (Lead / Project Engineering Authority)Project:Procure, Supply, Fabrication, Installation &amp; Commissioning of 3 Emergency Loading / Unloading SkidsLocation: North Jeddah Bulk Plant (NJBP) &ndash; Saudi AramcoRole Overview:The Engineering &amp; Design Engineer will act as the Lead Engineering Authority, responsible for overall engineering coordination, technical integrity, and full compliance with Saudi Aramco Standards throughout the project lifecycle&mdash;from design through commissioning and handover.Scope of Responsibilities:Engineering &amp; Technical Leadership<ul><li>Lead overall engineering coordination and ensure full compliance with SAES, SAMSS, and SAEP standards</li><li>Review and approve project specifications, IFC drawings, P&amp;IDs, layout drawings, skid GAs, and client technical documents</li><li>Develop and validate Design Basis for emergency loading/unloading skids handling:</li><li>PG91, PG95, Diesel, Kerosene, Jet-A</li></ul>Standards &amp; Compliance<ul><li>Ensure adherence to Saudi Aramco standards including:</li><li>SAES-A &ndash; Safety</li><li>SAES-B &ndash; Civil / Structural</li><li>SAES-H &ndash; HSE</li><li>SAES-L &ndash; Instrumentation</li><li>SAES-P &ndash; Piping</li><li>SAES-E &ndash; Electrical</li></ul>Interface &amp; Coordination<ul><li>Act as the primary engineering interface with:</li><li>Saudi Aramco engineering teams</li><li>NJBP operations</li><li>HSE and inspection departments</li><li>Address technical queries, deviations, and clarifications efficiently</li></ul>Key Deliverables:<ul><li>Design Basis Memorandum (DBM)</li><li>Skid General Arrangement (GA) drawings</li><li>P&amp;IDs and Process Flow Diagrams (PFD)</li><li>Hydraulic calculations (flow rates, pressure drop)</li><li>Engineering calculations and technical clarifications</li><li>Design risk assessments and HAZID / HAZOP support</li><li>Engineering Change Notices (ECN)</li><li>As-built drawings and final documentation</li></ul>Project Execution &amp; Handover:<ul><li>Participate in pre-commissioning, commissioning, and final handover activities</li><li>Support final acceptance and close-out documentation</li><li>Ensure compliance with NJBP operational requirements</li></ul>Candidate Requirements:<ul><li>Bachelor's degree in Mechanical Engineering, or a related field.</li><li>6 to 8 years of experience in Saudi Arabia</li><li>Proven experience working on Saudi Aramco projects</li><li>Strong knowledge of Aramco engineering standards and approval processes</li><li>Experience with fuel handling systems and skid-mounted packages</li><li>Ability to lead multidisciplinary engineering teams</li></ul>Salary &amp; Benefits:<ul><li>Competitive salary is aligned with KSA labor law.</li><li>Housing, transportation, medical insurance</li><li>Transferable iqama</li></ul>Job Type: Full-timeWork Location: In person

Engineering & Design Engineer

Join Diyar Alwatan Trading & Contracting Company (DACO) and explore 7   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.