Qureos Mentor

Draper

<div>Overview:
Draper is an independent, nonprofit research and development company headquartered in Cambridge, MA. The 2,000+ employees of Draper tackle important national challenges with a promise of delivering successful and usable solutions. From military defense and space exploration to biomedical engineering, lives often depend on the solutions we provide. Our multidisciplinary teams of engineers and scientists work in a collaborative environment that inspires the cross-fertilization of ideas necessary for true innovation. For more information about Draper, visit www.draper.com.
Job Description Summary:
The Software Engineer (SMTS) develops high performance solutions for resource constrained targets. Develops next-generation resilient and fault tolerant software solutions in the application domains of undersea, terrestrial, air, hypersonics and space. The Engineer is involved in the full software development life cycle.
Job Description:<div>
Duties/Responsibilities 
<ul><li>Evaluates requirements, proposes solutions, explores design trades to support a design.</li><li>Designs algorithms using modern theory and proven techniques.</li><li>Develops embedded software based on prototype algorithms with supervision.</li><li>Analyzes designs to demonstrate performance and functionality.</li><li>Develops and executes software tests to check compliance with requirements.
</li><li>Evaluates results to establish problem causes and develop solutions for inefficient or problems.</li><li>Prepares technical data, procedures, reports, drawings, manuals, and other required documentation.
</li><li>Communicates with customers and stakeholders to establish requirements and describe the design and deliverables.</li><li>Drive solutions to complex problems with limited direction &ndash; contribute to requirements development and architecture solution ideation.</li><li>Ability to take responsibility for subset of engineering scope.</li><li>Identify program/system-level technical risks and develop and execute mitigation strategies for them.
</li><li>Actively mentor less experienced engineers.</li><li>Performs other duties as assigned.</li></ul> 

Skills/Abilities 
<ul><li>Excellent development and troubleshooting skills on embedded targets.</li><li>Excellent knowledge of OS coding techniques&#1643; IP protocols&#1643; interfaces and hardware subsystems.</li><li>Expertise in software development for real-time systems.</li><li>Mastery of high level development languages (e.g. C/C++, Rust)</li><li>Excellent organizational skills and attention to detail.</li><li>Strong analytical and problem-solving skills.</li><li>Knowledge of software configuration management tools&#1643; defect tracking tools&#1643; and peer review processes.</li><li>Excellent time management skills with the proven ability to meet deadlines.</li><li>Excellent verbal and written communications skills.</li><li>Experience with UML/SysML.</li><li>Experience with in-circuit emulators, JTAG debuggers and laboratory test equipment.</li></ul> 

Education 
Requires a bachelor&rsquo;s degree in Computer Science, Computer Engineering, or Electrical Engineering. 
 
Experience 
Requires 5-10 years experience in Software Engineering or related.</div> 
Additional Job Description:
Need for a &quot;systems&quot; thinker with experience in design, development, or I&amp;T of safety critical systems to coordinate V&amp;V guidance system software. Lead the technical effort of independently verifying and validating safety critical software. Must understand V&amp;V process and how it fits into system lifecycle. Staff must be able to independently interpret changes to ConOps and System designs and map these to expected software changes to verify. Must be able to create test plans, requirement verification Test Matrices (RVTMs) and mentor junior staff. Must be able to identify alternative methods of verification and prioritize efforts based on cost, schedule, risk, and availability of test facilities.
 Nice to have skills are C, Python, Matlab, Simulink, PowerPC assembly, SIMICs, CI/CD.
Applicants selected for this position will be required to obtain &amp; maintain a government security clearance. Secret Clearance is preferred.
Connect With Draper for Future Opportunities! If you don't find the right posting in our Career Opportunities, you may submit your resume for future consideration.
Job Location - City:
Cambridge
Job Location - State:
Massachusetts
Job Location - Postal Code:
02139-3563
The US base salary range for this full-time position is
$82,300.00 - $205,750.00
Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the minimum and maximum target salaries for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Union ranges will be in compliance with the collective bargaining agreement's approved rates by location and role. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and does not include bonuses or benefits.
Our work is very important to us, but so is our life outside of work. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. If this specific job opportunity and the chance to work at a nationally renowned R&amp;D innovation company appeals to you, apply now www.draper.com/careers.
Draper is committed to creating an inclusive environment. We understand the value of inclusivity and its impact on a high-performance culture. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, national origin, veteran status, or genetic information. Draper is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact hr@draper.com.</div>

Senior Software Verification & Validation Engineer

<div>Overview:
Draper is an independent, nonprofit research and development company headquartered in Cambridge, MA. The 2,000+ employees of Draper tackle important national challenges with a promise of delivering successful and usable solutions. From military defense and space exploration to biomedical engineering, lives often depend on the solutions we provide. Our multidisciplinary teams of engineers and scientists work in a collaborative environment that inspires the cross-fertilization of ideas necessary for true innovation. For more information about Draper, visit www.draper.com.
Job Description Summary:
The Software Engineer (PMTS) develops high performance solutions for resource constrained targets. Develops next-generation resilient and fault tolerant software solutions in the application domains of undersea, terrestrial, air, hypersonics and space. The Engineer is involved in the full software development life cycle.
Job Description:<div>
Duties/Responsibilities 
<ul><li>Evaluates requirements, proposes solutions, explores design trades to support a design.</li><li>Designs algorithms using modern theory and proven techniques.</li><li>Develops embedded software based on prototype algorithms with supervision.</li><li>Analyzes designs to demonstrate performance and functionality.</li><li>Develops and executes software tests to check compliance with requirements.
</li><li>Evaluates results to establish problem causes and develop solutions for inefficient or problems.</li><li>Prepares technical data, procedures, reports, drawings, manuals, and other required documentation.
</li><li>Drive solutions to complex problems with limited direction &ndash; contribute to requirements development and architecture solution ideation.</li><li>Responsibility for subset of engineering scope.</li><li>Identifies program/system-level technical risks and develop and execute mitigation strategies.
</li><li>Actively mentor less experienced engineers.</li><li>Performs other duties as assigned.</li></ul> 

Skills/Abilities 
<ul><li>Excellent development and troubleshooting skills on embedded targets.</li><li>Excellent knowledge of OS coding techniques&#1643; IP protocols&#1643; interfaces and hardware subsystems.</li><li>Expertise in software development for real-time systems.</li><li>Mastery of high level development languages (e.g. C/C++, Rust)</li><li>Excellent organizational skills and attention to detail.</li><li>Strong analytical and problem-solving skills.</li><li>Knowledge of software configuration management tools&#1643; defect tracking tools&#1643; and peer review processes.</li><li>Excellent time management skills with the proven ability to meet deadlines.</li><li>Excellent verbal and written communications skills.</li><li>Experience with UML/SysML.</li><li>Experience with in-circuit emulators, JTAG debuggers and laboratory test equipment.</li></ul> 

Education 
Requires a bachelor&rsquo;s degree in Computer Science, Computer Engineering, or Electrical Engineering. 
 
Experience 
Requires 10-15 years experience in Software Engineering or related.</div> 
Additional Job Description:
Expertise in embedded systems, multi-core operating systems, modifying or writing kernel code, machine code, and C &amp; C++. The individual will learn or bring knowledge of multi-core processing, knowledge of scheduling, knowledge of RISC-V architecture.
Working knowledge of RUST or C experience and strong desire to learn RUST. Familiarity with processor low-level peripherals such as UART, SPI, DMA controller, memory controller and ability to absorb detail on processor and peripheral operation similar to complex commercial processors and microcontrollers. Ability to debug and isolate HW issues from a SW/user perspective. 
Familiarity with RISC-V architecture is preferred as is Python experience.
Applicants selected for this position will be required to obtain and maintain a government security clearance. Secret Clearance is required.
Connect With Draper for Future Opportunities! If you don't find the right posting in our Career Opportunities, you may submit your resume for future consideration.
Job Location - City:
Cambridge
Job Location - State:
Massachusetts
Job Location - Postal Code:
02139-3563
The US base salary range for this full-time position is
$95,000.00 - $237,500.00
Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the minimum and maximum target salaries for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Union ranges will be in compliance with the collective bargaining agreement's approved rates by location and role. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and does not include bonuses or benefits.
Our work is very important to us, but so is our life outside of work. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. If this specific job opportunity and the chance to work at a nationally renowned R&amp;D innovation company appeals to you, apply now www.draper.com/careers.
Draper is committed to creating an inclusive environment. We understand the value of inclusivity and its impact on a high-performance culture. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, national origin, veteran status, or genetic information. Draper is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact hr@draper.com.</div>

Principal Embedded Software Engineer

<div>Overview:
Draper is an independent, nonprofit research and development company headquartered in Cambridge, MA. The 2,000+ employees of Draper tackle important national challenges with a promise of delivering successful and usable solutions. From military defense and space exploration to biomedical engineering, lives often depend on the solutions we provide. Our multidisciplinary teams of engineers and scientists work in a collaborative environment that inspires the cross-fertilization of ideas necessary for true innovation. For more information about Draper, visit www.draper.com.
Job Description Summary:
The Microsystems Integration Group is seeking staff to apply engineering principles to the development and testing of miniaturized electronic devices for research, biomedical, commercial, and national defense applications.
 
 
Experience in a laboratory environment and excellent communication and analytical skills are required. The role will support multiple interdisciplinary programs and will require a candidate who is comfortable conducting experiments, analyzing data, and presenting results. System design and experience on multidisciplinary team including vendors and external technologies is critical. 
 
The candidate should have a background in electrical, mechanical, chemical, and/or materials engineering and have demonstrated examples of self-driven efforts in technical areas outside their academic training. The candidate will work in a diverse team-based environment alongside technical staff of varying levels of expertise to execute technical tasks and communicate technical matters to engineering and management.
Job Description:<div>
Duties/Responsibilities 
<ul><li>Designs and develops Microelectromechanical devices/sensors, schematics and physical layouts of integrated MEMS components or packaged assemblies.</li><li>Assesses performance and process capabilities of potential MEMS device designs using modeling or simulation software.</li><li>Tests and evaluates devices using a variety of tools, protocols, and software.</li><li>Analyzes and addresses issues such as reliability, yield improvement, and/or failure.</li><li>Develops production methods and fabrication processes for MEMS.</li><li>Drafts documentation such as operating instructions, performance specifications, and manuals.</li><li>Shares performance experience and operating characteristics with designers or other engineers for new product development purposes and/or training.</li><li>Develop and maintain effective internal/external relationships.</li><li>Independently execute task assignments under the oversight of program leadership and/or senior staff.</li><li>Contribute content for technical reports and presentations with appropriate guidance.</li><li>Adapt appropriately to changes in program requirements.</li><li>Identify challenges and risks associated with assigned tasks and communicate them to project leadership.</li><li>Performs other related duties as assigned.</li></ul> 

Skills/Abilities 
<ul><li>Excellent verbal and written communication skills.</li><li>Excellent organizational skills and attention to detail.</li><li>Excellent time management skills with the proven ability to meet deadlines.</li><li>Strong analytical and problem-solving skills.</li><li>Proficient with the fabrication and metrology tools and instrumentation related to MEMS component fabrication</li><li>Proficient with software tools and systems used for device design, modelling, and performance testing</li><li>Proficient with software tools and systems used for statistical process control, and reliability and failure analysis, including yield improvement</li></ul> 

Education 
Bachelor's degree in Electrical Engineering, Mechanical Engineering, or Physics required. Master's degree preferred 
 
Experience 
0-3 years of Microsystems Engineering or related experience.</div>
Additional Job Description:
This position will require the ability to obtain a US Security Clearance. Minimum requirement for a security clearance is US citizenship.
Connect With Draper for Future Opportunities! If you don't find the right posting in our Career Opportunities, you may submit your resume for future consideration.
Job Location - City:
Cambridge
Job Location - State:
Massachusetts
Job Location - Postal Code:
02139-3563
The US base salary range for this full-time position is
$62,500.00 - $205,750.00
Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the minimum and maximum target salaries for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Union ranges will be in compliance with the collective bargaining agreement's approved rates by location and role. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and does not include bonuses or benefits.
Our work is very important to us, but so is our life outside of work. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. If this specific job opportunity and the chance to work at a nationally renowned R&amp;D innovation company appeals to you, apply now www.draper.com/careers.
Draper is committed to creating an inclusive environment. We understand the value of inclusivity and its impact on a high-performance culture. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, national origin, veteran status, or genetic information. Draper is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact hr@draper.com.</div>

Microsystems Integration Engineer

<div>Overview:
Draper is an independent, nonprofit research and development company headquartered in Cambridge, MA. The 2,000+ employees of Draper tackle important national challenges with a promise of delivering successful and usable solutions. From military defense and space exploration to biomedical engineering, lives often depend on the solutions we provide. Our multidisciplinary teams of engineers and scientists work in a collaborative environment that inspires the cross-fertilization of ideas necessary for true innovation. For more information about Draper, visit www.draper.com.
Job Description Summary:
Are you the kind of person who likes to be the critical link? In this role you will work with engineering to ensure parts meet the required quality standards and specifications. We&rsquo;re looking for Engineers who know their way around components and supply and who want to help build technology that supports national defense and electronic systems.
 
 
As a Component Quality Engineer II, you will be responsible for the programmatic oversight and guidance to the selection, development, evaluation, qualification, production, and procurement of electronic parts.
 
 
What You&rsquo;ll Do: 
&#61558; Develop and revise foundational program documentation (such as Parts Management Plan, Device Evaluation Testing Plan, Qualification Plan, Lot Acceptance, etc.) 
&#61558; Identify key deliverables and dependencies, identify risks and opportunities, ensure plans are in place to meet program milestones, and make needed technical and quality related decisions 
&#61558; Independently drive solutions to complex problems - develop requirements, propose ways forward when requirements are unclear or incomplete, and adapt appropriately to changes in requirements 
&#61558; Establish and maintain process for a common parts library 
&#61558; Interface and coordinate decisions from various stakeholders including but not limited to designers, component engineers, procurement agencies, to assess enabling technologies and the selection of parts. 
&#61558; Maintain the Approved Parts List and associated interface with Design Environment Infrastructure 
&#61558; Coordinate Supply Chain Management requirements, including Program Protection 
&#61558; Contribute to the development of Procurement Plans/Strategies 
&#61558; Contribute to the establishment of supplier quality requirements and conduct supplier evaluations and supply chain risk management assessments
&#61558; 
Contribute to establishment of part specification requirements and associated templates 
&#61558; Define prototype acceptance requirements, production quality levels, production traceability requirements, production acceptance approach
 
 
What You Bring: 
&#61558; Experience working with electronic parts, circuit card assemblies, radiation hardened testing, and parts acceptance requirements. 
&#61558; Experience working with evolving requirements involving cross-functional stakeholders. 
&#61558; Ability to work independently 
&#61558; Strong organizational skills and attention to detail 
&#61558; Excellent time management skills with the proven ability to meet deadlines 
&#61558; Ability to prioritize tasks 
&#61558; Strong analytical and problem-solving skills 
&#61558; Good interpersonal skills to communicate clearly 
&#61558; Excellent written and oral communication skills
Job Description:<div>
Duties/Responsibilities 
<ul><li>Provide technical assistance and support to customers, suppliers, and employees in resolving issues.</li><li>Assist in the improvement of manufacturing, process, and product efficiency to reduce nonconforming products.</li><li>Ensures products meet the organizations and customers quality and product integrity requirements.</li><li>Supports product development or operations team by providing analysis and expertise throughout the inspection process.</li><li>Participates in a cross function team in the determination of root cause of failures. Identifies when failure analysis is necessary, along with providing recommendations of the corrective measures.</li><li>Analyzes data to identify trends in product quality or defects with the goal of mitigating and preventing recurrence and future defects.</li><li>Performs other duties as assigned.</li></ul> 

Skills/Abilities 
<ul><li>Ability to work on cross functional teams</li><li>Working knowledge of Lean Six Sigma principles
</li><li>Familiarity with Quality Standards ISO 9001:2015 and AS9100.</li><li>Expert knowledge and skills in process integration.</li><li>Strong organizational skills and attention to detail.</li><li>Excellent time management skills with the proven ability to meet deadlines.
</li><li>Ability to prioritize tasks.</li><li>Strong analytical and problem-solving skills.</li><li>Good interpersonal skills to communicate clearly.</li><li>Excellent written and oral communication skills.</li></ul> 

Education 
Requires a bachelor of Science degree an Engineering discipline. 
 
Experience 
Requires 3-5 years experience in quality engineering or other engineering role.</div> 
Additional Job Description:
This position will require the ability to obtain and maintain a DOD security clearance. Onsite in Cambridge, MA.
Connect With Draper for Future Opportunities! If you don't find the right posting in our Career Opportunities, you may submit your resume for future consideration.
Job Location - City:
Cambridge
Job Location - State:
Massachusetts
Job Location - Postal Code:
02139-3563
The US base salary range for this full-time position is
$75,000.00 - $150,000.00
Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the minimum and maximum target salaries for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Union ranges will be in compliance with the collective bargaining agreement's approved rates by location and role. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and does not include bonuses or benefits.
Our work is very important to us, but so is our life outside of work. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. If this specific job opportunity and the chance to work at a nationally renowned R&amp;D innovation company appeals to you, apply now www.draper.com/careers.
Draper is committed to creating an inclusive environment. We understand the value of inclusivity and its impact on a high-performance culture. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, national origin, veteran status, or genetic information. Draper is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact hr@draper.com.</div>

Component Quality Engineer II

<div>Overview:
Draper is an independent, nonprofit research and development company headquartered in Cambridge, MA. The 2,000+ employees of Draper tackle important national challenges with a promise of delivering successful and usable solutions. From military defense and space exploration to biomedical engineering, lives often depend on the solutions we provide. Our multidisciplinary teams of engineers and scientists work in a collaborative environment that inspires the cross-fertilization of ideas necessary for true innovation. For more information about Draper, visit www.draper.com.
Job Description Summary:
The Buyer serves as an integral member of the Contracts, Subcontracts, Procurement &amp; Property (CSPP) department. CSPP strives to provide both its internal and external customers with solution oriented leadership and guidance and is focused on achieving the strategic objectives of the organization while balancing risk and regulatory compliance.
Job Description:<div><div>
Job Description</div></div><div><div><div><div><div><div><div><div><div><div>
Duties/Responsibilities 
<ul><li>Manages heavy requisition workload to procure a variety of commodities and services.</li><li>Conducts market research and develops requests for quotations and proposals.</li><li>Develops new supply sources where vendors are inadequate.</li><li>Obtains proposals/quotations, and prepares pre negotiation recommendations on price and terms and conditions.</li><li>Examines bids including performing price and/or cost analysis and ensures conformity with the RFP/RFQ requirements and addresses any deviations.</li><li>Collect and evaluate necessary documentation to conduct supplier risk assessment for new suppliers.</li><li>Reviews terms and conditions, identify areas that deviate from company policy and document assessment of risk and potential mitigation strategies to be reviewed with CSPP management team.</li><li>Negotiates purchase including price/cost and coordinates negotiation of terms and conditions and makes awards.</li><li>Prepares and maintains purchasing file for electronic attachment to PO in ERP system.</li><li>Ensure that vendors comply with schedule and financial requirements of purchase orders.</li><li>Documents actions in Purchasing file to satisfy internal and U.S. Government audits and purchasing system review requirements.</li><li>Reviews open requisitions/purchase orders to ensure orders are placed in timely manner.</li><li>Closes out assigned purchase orders/requisition orders in a timely manner.</li><li>Responds promptly, courteously and professionally to Supervisor/Manager, requisitioner and vendor requests/inquires.</li><li>Provides procurement counsel and advice to requisitioners.</li><li>Arranges and coordinates vendor visits and in house meetings.</li><li>Performs other duties as assigned.</li></ul> 

Skills/Abilities 
<ul><li>Able to handle multiple assignments and deadlines in a fast-paced environment.</li><li>Able to quickly understand processes and ensure adherence to the same.</li><li>Able to perform duties in a timely and well organized manner with limited oversight.</li><li>Possess excellent problem solving skills.</li><li>Knowledge of contracting principles and government contracting requirements</li><li>Excellent written and oral communication skills.</li><li>Proficient in Microsoft Office Suite.</li><li>Knowledge of ERP systems such as PeopleSoft.</li></ul> 

Education 
Bachelor's degree in business or relevant field of study required. 
 
Experience 
0-2 years of experience in procurement or other relevant experience.</div></div></div></div></div></div></div></div></div></div>
Additional Job Description:
Applicants selected for this position will be required to obtain and maintain a government security clearance.
Connect With Draper for Future Opportunities! If you don't find the right posting in our Career Opportunities, you may submit your resume for future consideration.
Job Location - City:
Cambridge
Job Location - State:
Massachusetts
Job Location - Postal Code:
02139-3563
The US base salary range for this full-time position is
$82,300.00 - $205,750.00
Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the minimum and maximum target salaries for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Union ranges will be in compliance with the collective bargaining agreement's approved rates by location and role. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and does not include bonuses or benefits.
Our work is very important to us, but so is our life outside of work. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. If this specific job opportunity and the chance to work at a nationally renowned R&amp;D innovation company appeals to you, apply now www.draper.com/careers.
Draper is committed to creating an inclusive environment. We understand the value of inclusivity and its impact on a high-performance culture. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, national origin, veteran status, or genetic information. Draper is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact hr@draper.com.</div>

Buyer