Qureos Mentor

Flex-N-Gate

Flex-N-Gate is a leading manufacturer and supplier of components for the automotive industry, recently ranked 10th of the 150 Top North American Suppliers in “Automotive News.” A growing and vital company, Flex-N-Gate provides a great opportunity for hard-working and skilled individuals.
 
FLEX |N| GATE - ROYAL OAK
 JOB DESCRIPTION
 
JOB TITLE: Weld Technician
 
GENERAL SUMMARY: 
This position is responsible for technical ,mechanical ,pneumatic and electrical support, troubleshooting and repair of all Plant welding and assembly equipment.
 
PRINCIPLE DUTIES & RESPONSIBILITIES include but not limited to :
 <ul>
<li>installing, repairing, servicing machinery and equipment support systems</li>
<li>Identifying and trouble-shooting production problems</li>
<li>Maintaining production lines and performing predictive and preventive maintenance.</li>
<li>Supporting daily production addressing downtime expediently resetting faults replacing Sensors , Cords , Caps , shunts , etc…….In a timely manner.</li>
<li>Assuring all automatic nut/stud feeders are stocked verifying correct Part # and free of debris before filling machine.</li>
<li>Assuring all Sealer/Adhesive is working properly ,purged as required and replaced when needed.</li>
<li>Comply with Good Manufacturing Practices along with all Safety Policies and Procedures</li>
<li>Comply with all Quality System procedures , assure Red Rabbits are ran and recorded each shift , properly communicate any abnormal event if required to appropriate personnel.</li>
<li>Ability to understand, record, and communicate system problems and solutions.</li>
<li>Demonstrate good attendance with the ability to work extended hours, weekends and holidays.</li>
<li>Any other duties as assigned by Managers, Supervisor and/or Leaders to ensure the effectiveness, efficiency, and quality of products, processes and work.</li>
</ul>
REQUIRED SKILLS, KNOWLEDGE, ABILITIES / EDUCATION & EXPERIENCE
 1. Must be able to work in environment with welding fumes from robots.
 2. Industrial equipment electrical troubleshooting and installation
 3. A sound understanding of welding fundamentals and theory.
 4. Robot programming and troubleshooting of the following equipment:
 5. FANUC and/or ABB, MOTOMAN, NACHI , KUKA
 6. Demonstrate good problem solving skills
 7. Able to understand and troubleshoot basic electrical components and schematics
 8. Can troubleshoot, repair, and install hydraulic and/or pneumatic systems
 9. Can troubleshoot, repair and program resistance and MIG welding equipment
 10. Perform basic machining
 11. Perform required Preventive Maintenance checks & related data assuring any related documentation is filled out properly
 12. Complete required logs and repair documentation assuring is legible and accurate
 13. Knowledge of safety lockout
 14. Work independently
 15. Execute all job responsibilities in accordance with Quality System requirements.
 16. Must be able to lift a minimum of 50lbs., twist, bend, squat, climb, stand and walk continuously in close, confined surroundings.
 17. Related Work Experience – Minimum 5 years’ experience in manufacturing welding maintenance.
 18. Minimum Education – H.S. Diploma or GED
 19. Must be able to work mandatory OT as required 6-7 days per week
 
What We Offer
 <ul>
<li>Medical, dental, prescription, vision, life and disability insurance; and a flexible spending account</li>
<li>401(k) retirement savings plan with company match</li>
<li>Extensive safety training, new hire orientation, continuous learning and development programs and tuition reimbursement</li>
<li>Paid holidays and vacation time</li>
</ul>
What do our employees have to say?
 “It engages you professionally, and provides learning opportunities.”
 “Lots of growth opportunity.”
 “The company’s young enough to be exciting, but old enough to be stable.”
 Not just a job—a great place to work!
 
Flex-N-Gate is an equal opportunity employer. EEO/Minorities/Females/Veterans/Disabled.

Weld Technician

Flex-N-Gate is a leading manufacturer and supplier of components for the automotive industry, recently ranked 10th of the 150 Top North American Suppliers in “Automotive News.” A growing and vital company, Flex-N-Gate provides a great opportunity for hard-working and skilled individuals.
 
Flex-N-Gate is seeking a full-time Full-Stack Software Developer to join our growing in-house software development team.
 This position will primarily support Midas, Flex-N-Gate’s internally developed Manufacturing Execution System. Midas is an enterprise application used in our manufacturing facilities to support production tracking, machine activity, downtime, scrap, quality, operational reporting, and other plant-floor business processes.
 The developer will help build new Midas capabilities, maintain and improve existing functionality, and troubleshoot issues across the application, database, and manufacturing-system integration layers.
 Our primary technology stack includes C#, ASP.NET Core, Entity Framework Core, Microsoft SQL Server, Vue.js, JavaScript, and Tailwind CSS.
 The ideal candidate is passionate about developing reliable, maintainable software and applying sound programming practices. They should be comfortable learning an established application and manufacturing domain, investigating complex problems, and working with both technical and non-technical stakeholders.
 This is a remote position.
 Responsibilities
 <ul>
<li>Design, develop, test, and deploy full-stack features for the Midas Manufacturing Execution System.</li>
<li>Build and maintain applications using C#, .NET, ASP.NET Core, Entity Framework Core, SQL Server, Vue.js, and JavaScript.</li>
<li>Develop software that supports shop-floor and manufacturing business processes.</li>
<li>Create and maintain REST APIs, background services, database models, reports, dashboards, and user interfaces.</li>
<li>Maintain existing software systems through bug fixes, performance improvements, refactoring, and enhancements.</li>
<li>Investigate production issues involving application code, databases, integrations, and plant-floor data.</li>
<li>Work with production, quality, engineering, IT, and plant leadership to understand business needs and translate them into practical software solutions.</li>
<li>Develop reporting and visualization tools for production, downtime, scrap, quality, OEE, and resource-utilization data.</li>
<li>Improve application performance, reliability, maintainability, security, and data integrity.</li>
<li>Participate in technical design discussions, code reviews, testing, documentation, and deployment activities.</li>
<li>Support the rollout of new Midas features across multiple manufacturing facilities.</li>
<li>Balance long-term system improvements with the immediate operational needs of active production environments.</li>
</ul>
Required Qualifications
 <ul>
<li>Three or more years of professional web or application development experience.</li>
<li>Professional experience developing applications with C# and .NET, or substantial experience with a comparable server-side development platform.</li>
<li>Experience with ASP.NET Core, MVC, or similar application frameworks.</li>
<li>Experience with Entity Framework Core or another object-relational mapping framework.</li>
<li>Strong SQL skills, including relational database design, normalization, querying, and troubleshooting.</li>
<li>Experience with Microsoft SQL Server, MySQL, or another enterprise relational database platform.</li>
<li>Experience with a modern frontend framework such as Vue.js, React, or Angular.</li>
<li>Strong JavaScript, HTML, and CSS skills.</li>
<li>Experience designing, building, or consuming SOAP and REST APIs.</li>
<li>Understanding of the software development lifecycle, including design, implementation, testing, deployment, and maintenance.</li>
<li>Strong debugging, analytical, and problem-solving skills.</li>
<li>Ability to investigate and resolve technical issues with minimal guidance.</li>
<li>Strong attention to detail and a commitment to producing reliable, maintainable software.</li>
<li>Post-secondary education in computer science, software engineering, or a related field, or equivalent professional experience.</li>
</ul>
Preferred Qualifications
 <ul>
<li>Experience with Vue.js and the Vue ecosystem.</li>
<li>Experience with .NET 6 or later.</li>
<li>Experience with Microsoft SQL Server and Entity Framework Core.</li>
<li>Experience using Git and GitHub or another distributed version-control platform.</li>
<li>Experience with Tailwind CSS or another utility-based CSS framework.</li>
<li>Experience with Sass, Less, or another CSS preprocessor.</li>
<li>Experience with Chart.js or other charting and data-visualization libraries.</li>
<li>Experience with automated testing, continuous integration, and continuous deployment.</li>
<li>Experience optimizing SQL queries, database indexes, and application performance.</li>
<li>Experience working with high-volume production, event, or time-series data.</li>
<li>Knowledge of user experience and user-interface design principles.</li>
<li>Experience with enterprise applications deployed across multiple locations.</li>
<li>Experience supporting, modernizing, or extending established software systems.</li>
<li>Knowledge of Manufacturing Execution Systems, Enterprise Resource Planning systems, industrial automation, or plant-floor integrations.</li>
<li>Familiarity with PLC-generated data, machine connectivity, or manufacturing equipment integrations.</li>
<li>Knowledge of the automotive or other manufacturing industries.</li>
<li>Bachelor’s degree in computer science, software engineering, or a related field.</li>
</ul>
Ideal Candidate
 
The successful candidate will: 
<ul>
<li>Take ownership of problems from investigation through implementation and deployment.</li>
<li>Be comfortable working within and improving an established enterprise application.</li>
<li>Be curious about manufacturing processes and how software can improve plant operations.</li>
<li>Be able to work independently while collaborating closely with other developers and business stakeholders.</li>
<li>Be willing to learn new technologies, systems, and business processes.</li>
<li>Understand that software used in active manufacturing environments must be dependable, accurate, and supportable.</li>
</ul>
Why Join the Midas Team
 <ul>
<li>Build software that has a direct and visible impact on manufacturing operations.</li>
<li>Work on an internally owned enterprise platform used across multiple manufacturing facilities.</li>
<li>Develop substantial features from initial requirements through production rollout.</li>
<li>Solve interesting problems involving software, databases, machines, production data, and real-world operations.</li>
<li>Help shape the future architecture, functionality, and user experience of a growing Manufacturing Execution System.</li>
</ul>
What We Offer
 <ul>
<li>Medical, dental, prescription, vision, life and disability insurance; and a flexible spending account</li>
<li>401(k) retirement savings plan with company match</li>
<li>Extensive safety training, new hire orientation, continuous learning and development programs and tuition reimbursement</li>
<li>Paid holidays and vacation time</li>
</ul>
What do our employees have to say?
 “It engages you professionally, and provides learning opportunities.”
 “Lots of growth opportunity.”
 “The company’s young enough to be exciting, but old enough to be stable.”
 Not just a job—a great place to work!
 
Flex-N-Gate is an equal opportunity employer. EEO/Minorities/Females/Veterans/Disabled.

Software Developer

POSITION DESCRIPTION: 
Can independently & efficiently set up and maintain process controls on equipment that meet Customer specifications.
 
RESPONSIBILITIES: 
1. Follows work instructions and oral direction.
 2. You will be responsible for operation, and troubleshooting, equipment
 3. Optimizes machine processes by reducing scrap, cycle times and change over times
 4. Responsible for coordination of manufacturing activities to ensure good production and quality
 5. Uses part weights and metals data for a systematic approach to improve the running process
 6. optimum performance;
 7. Describes system, components, and parts operating characteristics and malfunctions by writing technical reports; Performs start up and shut down processes on the presses
 8. Tests functioning of installed equipment
 9. Compiles and documents production data. Communicates all issues with Maintenance/Quality/Supervisors
 10. Performs end of arm set up and modifications of the robots as required
 11. Oversees in-house tooling and material evaluations to ensure
 12. Sets-up injection molds and performs start-up and shut-down of molding systems
 13. Performs general housekeeping duties as required in work areas.
 14. Assists in setup of workstation during a mold change or as required.
 15. Responsible for maintaining ISO/TS16949:2002 compliance within the manufacturing discipline.
 16. Responsible for maintaining ISO14001:2004 compliance with the manufacturing discipline.
 17. Responsible for maintaining OSHA compliance.
 
QUALIFICATIONS: 
1. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence.
 2. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
 3. Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
 4. Knowledge of TPO’s/ABS/PC’s
 5. Industrial equipment electrical troubleshooting and installation
 6. Must have programming experience
 7. Able to read electrical schematics and drawings
 8. PLC programming and troubleshooting experience
 9. Has the responsibility to aid in the provision of a safe and clean work environment. This will be accomplished by participating in the safety process. Examples of participation would include, but not limited to conducting internal safety audits, investigation of accidents and communication of safety related information.
 
ADDITIONAL COMMENTS/PHYSICAL DEMANDS: 
1. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 2. While performing the duties of this job, the employee is regularly required to stand & walk.
 3. The employee frequently is required to use hands to finger, handle, or feel objects, tools, or controls.
 4. The employee is frequently required, to reach with hands and arms, climb or balance, and talk or hear.
 5. The employee will experience changes in temperature and humidity within the plant.
 6. The employee must regularly lift and/or move up to 10 pounds and occasionally lift up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and depth perception.
 
Other duties as required.

Stamping/Press Technician II

Flex-N-Gate is a leading manufacturer and supplier of components for the automotive industry, recently ranked 10th of the 150 Top North American Suppliers in “Automotive News.” A growing and vital company, Flex-N-Gate provides a great opportunity for hard-working and skilled individuals.
 
Job Title: Team Leader- Blanking Press/Welding
 Starting Pay Rate: $24.00(after 6 months $25.00)
 Schedule: Monday-Friday, 3:00 PM - 11:00 PM, with mandatory overtime as needed
 Reports To: Blanking/Weld/Press Supervisor
 
Job Summary: 
We are seeking a skilled and motivated Team Leader to join our team. This role primarily responsible for ensuring the success of our team on 2nd shift. This role requires strong leadership skills, critical thinking skills, experience in manufacturing (preferably operation a press), and working in a team setting.
 
Responsibilities: 
<ul>
<li>Ensure department employees understand and follow quality standards for our products.</li>
<li>Guide team members each day to help meet production goals.</li>
<li>Watch over presses during use. Some presses are run by one operator, others by two.</li>
<li>Ensure parts don’t get stuck in the machine and check that finished parts are made correctly as they go into baskets.</li>
<li>Clear Scrap from Machine: On single-operator presses, push scrap metal out using a long rod. This involves bending and using up to 50 pounds of push force.</li>
<li>Create and attach labels to baskets of finished parts.</li>
<li>If parts feed incorrectly, cut out the material by hand and throw it away. May need to use a hand grinder.</li>
<li>During machine changeovers, move conveyor belts on wheels (requires up to 44 pounds of push/pull force). Use hand tools like wrenches to tighten nuts and bolts.</li>
<li>For stacked parts, collect from conveyor, bend at the waist, and place parts into baskets (up to 30 pounds push force, parts weigh up to 20 pounds).</li>
<li>Occasionally operate a forklift or overhead crane (certification and training provided).</li>
<li>Ability Make quick decisions, juggle multiple tasks, and follow through on assignments.</li>
<li>Be willing to learn and use the MaintiMizer computer system.</li>
<li>Show leadership, work well with others, and communicate clearly with team members.</li>
<li>General clean-up in the area – using broom, dust pan, mopping and other duties as assigned. Additional duties as assigned</li>
</ul>
Shift is 8 hours. May work overtime up to 10-12 hours. Two 10-minute breaks/ shift and 20-minute meal break. Employees get paid the entire time they are clocked in and do not clock out for breaks, if taken on campus!
 
Qualifications: 
<ul>
<li>Must be able to communicate in English</li>
<li>Must be able to demonstrate understanding health and safety compliance training programs and departmental work instructions that are written in English</li>
<li>Use of basic hand tools such as wrenches and pliers</li>
<li>High school diploma or equivalent</li>
<li>Ability to work in a fast-paced environment</li>
</ul>
Physical Demands: 
<ul>
<li>Must wear safety toe boots, hearing protection, safety glasses, Kevlar cut protection clothing and work apron</li>
<li>Must be able to use both hands for safe operation of forklift. Steering wheel with levers controlled by right hand. Constant pedaling with right foot.</li>
<li>Operator must have full range of motion of the neck and spine so that operator can look behind forklift while driving backwards and look up and down with moving products</li>
<li>While performing the duties of this job, the employee is regularly required to stand, walk; use hands to finger, handle or feel; reach with hands and arms; talk and hear.</li>
<li>Employee must regularly lift and/or move up to 50 pounds. The employee is required to push, pull, reach and lift above head and below shoulder level. The employee must be able to carry bumpers weighing up to 63.5lbs for as far as 15-25 feet.</li>
</ul>
Work Environment: 
<ul>
<li>The work environment is representative of conditions typical for a manufacturing facility. Guardian West is not a climate-controlled facility. Safety precautions must always be followed to reduce exposure to hazards</li>
<li>Exposure to moving mechanical parts, wet/humid conditions, fumes, airborne particles, and loud environments</li>
<li>Occasional exposure to toxic or caustic chemicals and vibration</li>
</ul>
Why Join Us?
 We offer a competitive pay rate, opportunities for skill development, and a dynamic work environment where your expertise as a Team Lead will directly contribute to the success of the team.
 
What We Offer
 <ul>
<li>Medical, dental, prescription, vision, life and disability insurance; and a flexible spending account</li>
<li>401(k) retirement savings plan with company match</li>
<li>Extensive safety training, new hire orientation, continuous learning and development programs and tuition reimbursement</li>
<li>Paid holidays and vacation time</li>
</ul>
What do our employees have to say?
 “It engages you professionally, and provides learning opportunities.”
 “Lots of growth opportunity.”
 “The company’s young enough to be exciting, but old enough to be stable.”
 Not just a job—a great place to work!
 
Flex-N-Gate is an equal opportunity employer. EEO/Minorities/Females/Veterans/Disabled.

Press Team Leader 2nd Shift

<div>
 Flex-N-Gate is a leading manufacturer and supplier of components for the automotive industry, recently ranked 10th of the 150 Top North American Suppliers in &ldquo;Automotive News.&rdquo; A growing and vital company, Flex-N-Gate provides a great opportunity for hard-working and skilled individuals.
 
 
 
 Summary
 
 
 
 The Data Administrator is responsible for ensuring a timely and accurate data input or output into the system of the department he or she works for. This facility is a three shift operation, therefore, candidate must be willing to work any shift.
 
 
 Core Competencies
 
 
 <ul>
 <li>
 Interpersonal Skills
 </li>
 <li>
 Team Work
 </li>
 <li>
 Time Management
 </li>
 <li>
 Accountability and Dependability
 </li>
 <li>
 Communication Skills
 
 
 </li>
 </ul>
 Flex-N-Gate Training Requirements
 
 
 <ul>
 <li>
 CHRF.00003 New Employee Orientation
 </li>
 <li>
 Applicable software training
 </li>
 <li>
 IATF/ISO Related Training
 </li>
 <li>
 Quality Management Systems - CQAM.00001 Quality Management Systems Manual
 
 
 </li>
 </ul>
 
 Job Duties
 
 
 
 <ul>
 <li>
 The main responsibility of a data administrator is to collect, review and introduce data into a computer.
 </li>
 <li>
 Operate all office equipment
 </li>
 <li>
 Review existing data and to correct or update when necessary
 </li>
 <li>
 Maintain accurate database records
 </li>
 <li>
 Provide reports on various topics to supervisor
 </li>
 <li>
 Compile statistical reports
 </li>
 <li>
 Assist with verification and editing of input and output data
 </li>
 <li>
 Maintain records of various task related to the job
 </li>
 <li>
 Perform quality control analysis and other related activities
 </li>
 <li>
 Referring personal and telephone requests to the appropriate staff
 
 
 </li>
 </ul>
 
 Requirements
 
 
 
 <ul>
 <li>
 High School Diploma
 </li>
 <li>
 Minimum of 2 years experience in the clerical field
 </li>
 <li>
 Relevant experience with PC software packages
 </li>
 <li>
 The incumbent is responsible for the awareness, understanding, specific responsibilities and management of the Environmental Management System (EMS) as stated in EMS policy CEVPL.00005.
 </li>
 <li>
 The incumbent is responsible for the awareness, understanding, specific responsibilities and management of the Quality Management System (QMS) as stated in
 
 
 </li>
 </ul>
 CQAM.00001 &ndash; Corporate Quality Manual.
 
 
 Working Conditions
 
 
 <ul>
 <li>
 Production floor environment
 </li>
 <li>
 Overtime as required
 
 
 </li>
 </ul>
 This job description is not inclusive. The duties, experience, functions, and any other descriptions herein may be changed at any time and other duties may be assigned as necessary. The company reserves the right to add, delete, or otherwise alter these responsibilities when and as necessary.
 
 
 
 What We Offer
 
 
 
 <ul>
 <li>
 Medical, dental, prescription, vision, life and disability insurance; and a flexible spending account
 </li>
 <li>
 401(k) retirement savings plan with company match
 </li>
 <li>
 Extensive safety training, new hire orientation, continuous learning and development programs and tuition reimbursement
 </li>
 <li>
 Paid holidays and vacation time
 
 
 </li>
 </ul>
 What do our employees have to say?
 
 
 &ldquo;It engages you professionally, and provides learning opportunities.&rdquo;
 
 
 &ldquo;Lots of growth opportunity.&rdquo;
 
 
 &ldquo;The company&rsquo;s young enough to be exciting, but old enough to be stable.&rdquo;
 
 
 Not just a job&mdash;a great place to work!
 
 
 Flex-N-Gate is an equal opportunity employer. EEO/Minorities/Females/Veterans/Disabled.
</div>

Shipping/Receiving Data Administrator