Urwah Admin

<div>Primary Responsibilities
<ul><li>Demonstrate intermediate knowledge of internal combustion engines, electrical circuits, and mechanical systems used in power generation equipment.
</li><li>Determine overall mechanical condition of generators and equipment, diagnose malfunctions, and initiate repair actions.
</li><li>Systematically analyze equipment issues through visual/auditory inspection and test equipment.
</li><li>Utilize diagnostic computer programs effectively.
</li><li>Perform operational inspections and ensure equipment is properly serviced prior to rental.
</li><li>Complete repairs such as replacing engine heads, seals, accessory components, and performing engine overhead adjustments.
</li><li>Repair, adjust, or replace major assemblies and sub-assemblies including generator ends, radiators, fuel systems, and exhaust systems.
</li><li>Use technical manuals, wiring schematics, test equipment, and Cummins-based diagnostic software proficiently.
</li><li>Follow all established safety policies and standards.
</li><li>Safely operate hand and power tools, forklifts, overhead cranes, welders, and cutting/grinding tools; properly handle hazardous waste.
</li><li>Teach and guide Level 1 technicians on generator fundamentals.
</li><li>Troubleshoot equipment issues with customers over the phone as needed.
</li></ul>Job Duties
<ul><li>Conduct preventative maintenance and repairs on power generation equipment.
</li><li>Perform accurate mechanical inspections and document findings.
</li><li>Maintain a clean and safe work environment.
</li><li>Communicate equipment status and repair timelines with operations and customers.
</li><li>Support after-hours service calls as required.
</li><li>Safely move, lift, and position equipment using forklifts and overhead cranes.
</li><li>Complete service documentation, work orders, and reports using computer-based systems.
</li></ul>Education &amp; Qualifications
<ul><li>A minimum of 2 years of mechanical experience is required.
 </li><li>Must have basic knowledge of engine functionality and manufacturer-specification servicing.
</li><li>Basic computer skills for mechanical troubleshooting programs.
</li><li>Strong communication skills to provide quality customer service and keep operations updated.
</li><li>Ability to work with minimal supervision, including after-hours callouts.
</li><li>Ability to operate a forklift and overhead crane.
</li><li>Candidate must satisfy all internal driver eligibility requirements, including compliance with company policies, licensing standards, and driving record criteria
</li></ul>Veterans Welcome
In NOV, we proudly support and hire U.S. military veterans. We recognize the value of your leadership, technical expertise, and dedication to mission success. Veterans from all branches are encouraged to apply and build a future with us.
Conditions of Employment
Offer of employment is contingent upon the completion of background and drug screenings, conducted in accordance with all applicable federal, state, and local laws.
Learn More
 
Visit our benefits website at https://usbenefits.nov.com/
 
Visit our about us page: https://www.nov.com/about/our-business-units/wellsite-services</div>

Service Techinician

<div>NOV is a leading provider of technology, equipment, and services to the global oil and gas industry that supports customers&rsquo; full-field drilling, completion, and production needs. Since 1862, NOV has pioneered innovations that improve the cost-effectiveness, efficiency, safety, and environmental impact of oil and gas operations. We're continually pushing our own standards higher to deliver the safest, most efficient, and most reliable drilling solutions in the world. Join us as we continue to power the industry that powers the world.
NOV Rig Technologies makes and supports the world&rsquo;s most advanced drilling solutions. To learn more about Rig Technologies products and services, please visit us at https://www.nov.com/about/our-company-structure/rig
Global Supplier Quality &amp; Development Manager
JOB SUMMARY
The Global Supplier Quality &amp; Development Manager is responsible for leading the global supplier quality strategy and driving supplier performance improvement across quality, cost, delivery, and lead time. This role partners closely with Supply Chain, Engineering, Operations, and key suppliers to enhance supplier capability, reduce risk, and enable sustainable operational excellence.
The position requires strong leadership, technical acumen, and hands-on experience in supplier development, continuous improvement, and cost optimization within a global manufacturing environment.
PRIMARY RESPONSIBILITIES
Global Strategy &amp; Governance
<ul><li>Develop and implement the global supplier quality and development strategy aligned with company objectives
</li><li>Define and standardize global supplier qualification, audit, and performance monitoring frameworks.
</li><li>Establish enterprise-level policies, procedures, and governance models for supplier quality and development.
</li><li>Provide functional guidance and alignment across regions while enabling local execution.
</li><li>Lead global KPI structure and reporting cadence for supplier performance.
</li></ul>Supplier Quality Leadership
<ul><li>Support regional teams in conducting supplier audits (QMS, process, and technical capability assessments).
</li><li>Ensure consistent application of Root Cause Analysis (RCA) and Corrective Action (CAPA) methodologies.
</li><li>Promote adherence to company quality standards and applicable industry requirements.
</li><li>Serve as escalation point for critical supplier quality issues requiring enterprise visibility.
</li></ul>Supplier Development &amp; Capability Building
<ul><li>Partner with strategic suppliers to strengthen process capability, quality systems, and operational performance.
</li><li>Champion supplier improvement initiatives focused on:
</li><li>Reducing defect rates and non-conformance
</li><li>Improving on-time delivery
</li><li>Enhancing process stability and repeatability
</li><li>Support the deployment of Lean, Six Sigma, and continuous improvement methodologies.
</li><li>Oversee development of standardized supplier scorecards and performance dashboards.
</li></ul>Cost Reduction &amp; Lead Time Optimization
<ul><li>Collaborate with Procurement, Engineering, and regional Supplier Development leaders to identify cost-reduction opportunities.
</li><li>Enable value engineering and design-for-manufacturability initiatives.
</li><li>Support alternate sourcing and supplier localization strategies.
</li><li>Drive structured lead time reduction initiatives through process mapping, bottleneck identification, and capacity assessment.
</li><li>Provide visibility to executive leadership on cost, lead time, and risk trends.
</li></ul>Enterprise Supplier Risk &amp; Performance Management
<ul><li>Establish and maintain a global supplier risk management framework.
</li><li>Define enterprise-level KPIs for quality, delivery, cost, and responsiveness.
</li><li>Implement standardized supplier performance review processes across regions.
</li><li>Monitor supply risk trends and coordinate mitigation strategies with regional teams.
</li><li>Lead containment strategy alignment for high-impact supplier disruptions.
</li><li>Provide executive-level reporting and insights on supplier health and risk exposure.
</li></ul>New Product &amp; Technology Readiness
<ul><li>Align early supplier engagement strategies for New Product Introduction (NPI) programs.
</li><li>Ensure consistent APQP and PPAP governance standards across regions.
</li><li>Support assessment of supplier readiness for new technologies and complex components.
</li><li>Promote proactive risk mitigation planning for product launches.
</li></ul>Leadership &amp; Global Collaboration
<ul><li>Provide functional leadership to global Supplier Quality and Development teams.
</li><li>Foster knowledge sharing and best-practice standardization across regions.
</li><li>Work cross-functionally with:
</li><li>Global Supply Chain
</li><li>Engineering
</li><li>Manufacturing
</li><li>Operations
</li><li>Represent the Supplier Quality &amp; Development function in executive reviews and strategic planning sessions.
</li><li>Build organizational capability through coaching, alignment, and continuous improvement.
</li></ul>EDUCATION &amp; EXPERIENCE QUALIFICATIONS
<ul><li>Bachelor&rsquo;s degree in Engineering or related technical discipline (Master&rsquo;s preferred).
</li><li>10+ years of progressive leadership experience in Supplier Quality , Supplier Development, or global manufacturing environment.
</li><li>Previous oil &amp; gas industry experience preferred
</li><li>Demonstrated experience leading managers and senior professionals across multi-site or global operations.
</li><li>Proven experience defining and implementing enterprise-level supplier quality governance frameworks.
</li><li>Experience driving organizational and process transformation initiatives in complex environments.
</li><li>Strong background in Lean Manufacturing, Six Sigma, Root Cause Analysis, and APQP / PPAP methodologies.
</li><li>Demonstrated success delivering measurable improvements in quality, cost, and lead time at enterprise scale.
</li><li>Experience developing supplier risk management and performance governance models.
</li><li>Demonstrated ability to influence executive leadership and align cross-functional stakeholders.
</li></ul>Competitive Benefits: (visit usbenefits.nov.com for more information about our benefits offerings)
<ul><li>401(k) Retirement Plan &ndash; NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest.
</li><li>Competitive medical plans that are effective your date of hire. Coverage options for just yourself as an eligible employee start at as little as $40 per pay period (bi-weekly), and plans that cover your entire family (yourself, eligible spouse, and eligible children) start at $150.50 per pay period (bi-weekly).
</li><li>Starting in 2026, FREE MDLIVE virtual visits (when enrolled in an NOV medical plan).
</li><li>FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician).
</li><li>FREE Basic Life and AD&amp;D insurance at 2 times your annual salary (for full-time employees).
</li><li>All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). Pre-NOV relevant experience (years of service) may be considered for vacation accruals.
</li><li>All regular full-time employees receive up to 11 paid holidays per year.</li></ul></div>

Global Supplier Quality & Development Manager

<div>
 
 Key Responsibilities
 
 
 
 
 JOB DESCRIPTION
 
 
 
 Conduct structural inspections in accordance with NOV procedures and applicable standards.
 
 
 Identify and assess structural defects, corrosion, or fatigue, and recommend corrective actions.
 
 
 Supervise and support repair, refurbishment, and modification activities on rig structures.
 
 
 Review and verify related technical documentation.
 
 
 Prepare detailed service and inspection reports with findings, recommendations, and follow-up actions.
 
 
 Coordinate with engineering, fabrication, and quality teams to ensure accurate execution of repair plans.
 
 
 Provide on-site technical support during rig-up, testing, and commissioning activities.
 
 
 Maintain compliance with all safety and quality requirements while working in field environments.
 
 
 Support customers by ensuring timely communication and professional service delivery.
 
 
 
 Qualifications &amp; Skills
 
 
 
 Bachelor&rsquo;s degree in mechanical, Civil, or Structural Engineering (or equivalent).
 
 
 Strong understanding of rig structure design, load path analysis, and welding inspection principles.
 
 
 Experience with API and NOV inspection standards (PI4G, DS-1, etc.).
 
 
 Ability to interpret engineering drawings and technical documentation.
 
 
 Excellent troubleshooting, communication, and reporting skills.
 
 
 Willingness to travel and work in rig sites, fabrication yards, or offshore environments.
 
 
 
 About Us
 
 
 
 Every day, the oil and gas industry&rsquo;s best minds put more than 150 years of experience to work to help our customers achieve lasting success.
 
 
 
 We Power the Industry that Powers the World
 
 
 
 Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success&mdash;now and in the future.
 
 
 
 Global Family
 
 
 
 We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work.
 
 
 
 Purposeful Innovation
 
 
 
 Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better.
 
 
 
 Service Above All
 
 
 
 This drives us to anticipate our customers&rsquo; needs and work with them to deliver the finest products and services on time and on budget.
 
 
 
 About The Team
 
 
 
 
 Corporate
 
 
 
 Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.
</div>

Structural Service Engineer

<div>
 
 Job Description
 
 
 
 
 NOTE: Please ONLY apply if you have sufficient experience and skills required as per job description below.
 
 
 
 
 Job Summary
 
 
 
 Looking for Senior Process Engineer with 10 to 15 years in oil and gas Industry, fluent in process designs, process software and having site experience.
 
 
 Has strong communication and organization skills, must be action oriented and willing to embrace new challenges.
 
 
 
 Responsibilities
 
 
 
 <ul>
 <li>
 Coordinate and collaborate with process lead/Discipline manager to determine project objective for the process team within the project.
 </li>
 <li>
 Provide appropriate process engineering input to design activities undertaken by other inter-discipline engineering within the project team.
 </li>
 <li>
 Interface with other disciplines, and with vendors, and required parties with process engineering
 </li>
 <li>
 Ensure that the deliverables provided to the project are technically accurate, within the scope, budget and schedule, and in compliance with quality procedures and project plans
 </li>
 <li>
 Provide leadership/mentorship for the (junior) process engineer so he/she succeeds in the given task.
 </li>
 <li>
 Contribute to the process team in order to create a good working environment and a strong team spirit.
 </li>
 <li>
 Execute Feasibility Studies / Conceptual Design / Process Studies.
 </li>
 <li>
 Develop and assist others process engineer in key design documents (Heat &amp; Material Balance,
 </li>
 <li>
 PFD, P&amp;ID, DataSheets, etc.).
 </li>
 <li>
 Fluent with process softwares such as: Hysys, FlareNet, ProMax etc.
 </li>
 <li>
 Have good knowledge of the following process work: Line Hydraulics (Line Sizing, Pumps, Control Valves); PSV sizing; blowdown &amp; Equipment Sizing,etc.
 </li>
 <li>
 Act as representative in Technical Design Reviews (P&amp;ID, HAZOP, SIL, HAZID, client and vendor Meetings).
 </li>
 <li>
 Experience assisting project engineering leads and managers in project design and execution according to contract and client needs.
 </li>
 <li>
 Adept at writing technical reports and scopes of work and Technical Queries.
 </li>
 <li>
 Recognize problems and discrepancies in work process and suggest improvement and request help when needed.
 
 
 </li>
 </ul>
 
 HSEQ
 
 
 
 <ul>
 <li>
 Comply with Company values and QA System
 </li>
 <li>
 Responsible for a process design that will operate safely and adhere to the NOV HSE and Quality requirement
 </li>
 <li>
 Contribute to continuous improvement of HSE and Quality within the project and everyday office environment
 
 
 </li>
 </ul>
 
 Business
 
 
 
 
 Financial
 
 
 
 <ul>
 <li>
 Responsible for the completion of tasks and ensures that process engineering deliverable are within allowable budget and time agreed in the contract
 
 
 </li>
 </ul>
 
 Strategy
 
 
 
 <ul>
 <li>
 Work closely with Process lead to align the strategic decisions with planning activities Delegate and follow up work assigned to other process engineer
 
 
 </li>
 </ul>
 
 Methods
 
 
 
 <ul>
 <li>
 Utilize the PEM, carry out tasks given in accordance to the company policies, procedures, etc. Communicate, integrate and cooperate with other discipline to achieve the common goals
 
 
 </li>
 </ul>
 
 Competencies And Manning
 
 
 
 <ul>
 <li>
 Is familiar with the principle of safe process engineering design
 </li>
 <li>
 Is familiar with PEM,
 
 
 </li>
 </ul>
 
 Project Execution
 
 
 
 <ul>
 <li>
 Execute the projects according to PEM
 </li>
 <li>
 Follow-up activities within the process group, assist/guide junior process engineers to fulfil the process tasks.
 
 
 </li>
 </ul>
 
 Colleague
 
 
 
 <ul>
 <li>
 Work closely with process team members and process lead within the project to ensure the quality of process documents and deliveries
 </li>
 <li>
 Good team spirits
 
 
 </li>
 </ul>
 
 Management and Leadership
 
 
 
 <ul>
 <li>
 Strong interpersonal and communication skills
 </li>
 <li>
 Ability to plan and organize workflow in efficient manner
 </li>
 <li>
 Mentor / Coach junior engineers.
 
 
 </li>
 </ul>
 
 Behavioral Skills
 
 
 
 <ul>
 <li>
 Strong communication and organization skills
 </li>
 <li>
 Must be action oriented and willing to embrace new challenges
 </li>
 <li>
 Ability to work in dynamic and fluid environment
 </li>
 <li>
 Must have excellent verbal and written skills
 </li>
 <li>
 Must demonstrate a strong orientation towards teamwork and collaboration
 </li>
 <li>
 Strong interpersonal skills with the ability to work effectively both within a team environment and with limited supervision, ability to take lead.
 </li>
 <li>
 Proactive and innovative
 </li>
 <li>
 Fluent in English and good verbal and written communication skills
 
 
 </li>
 </ul>
 
 TECHNICAL COMPETENCIES
 
 
 
 <ul>
 <li>
 Strong chemical engineering basis
 </li>
 <li>
 Extensive experience in Oil &amp; Gas industry (MIDSTREAM) in EPC
 </li>
 <li>
 Good knowledge for the industry standards such as : API, Shell DEP, Saudi ARAMCO, ADNOC standards.
 </li>
 <li>
 Good knowledge in the package&rsquo;s design such as: Gas treatment, oil treatment and produced water treatment.
 
 
 </li>
 </ul>
 
 Experience Qualifications
 
 
 
 <ul>
 <li>
 Bachelor Degree or Master's degree in Chemical Engineering
 </li>
 <li>
 10 to 15 years of relevant experience
 </li>
 <li>
 Fluent in process Designs
 </li>
 <li>
 Fluent in process Software
 </li>
 <li>
 Site experience
 </li>
 <li>
 Additional technical studies and in project management are an advantage
 </li>
 <li>
 Experience and good knowledge for Packages Designs: Gas Dehydration and Sweetening units, Crude Oil Treatment, etc.
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Every day, the oil and gas industry&rsquo;s best minds put more than 150 years of experience to work to help our customers achieve lasting success.
 
 
 
 We Power the Industry that Powers the World
 
 
 
 Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success&mdash;now and in the future.
 
 
 
 Global Family
 
 
 
 We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work.
 
 
 
 Purposeful Innovation
 
 
 
 Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better.
 
 
 
 Service Above All
 
 
 
 This drives us to anticipate our customers&rsquo; needs and work with them to deliver the finest products and services on time and on budget.
</div>

Senior Process Engineer (Oil and Gas, Midstream)

<div>Job Summary:
As Purchasing Lead, you will be responsible for delivering the day-to-day activities of the purchasing function while maintaining strong relationships with vendors and suppliers. You will evaluate purchasing and pricing trends to support demand forecasting and cost optimization. Your analytical and research skills will be instrumental in providing insightful management information to key stakeholders, enabling data-driven decisions that support business goals. In this role, you&rsquo;ll actively engage with current and prospective suppliers to strengthen commercial advantage, ensuring alignment with the company&rsquo;s quality programs and strategic initiatives. 
RESPONSIBILITIES/ACCOUNTABILTY &amp; AUTHORITY:
<ul><li>Lead competitive sourcing and purchasing negotiations.
</li><li>Develop and execute sourcing strategies, particularly for supplier changes or spend optimization.
</li><li>Collaborate effectively with procurement team members to manage expectations and ensure a positive internal customer experience.
</li><li>Ensure the needs and satisfaction of operations and production teams are consistently met through procurement activities.
</li><li>Lead and support contract negotiations, supplier management, and contract implementation.
</li><li>Deliver against key targets including cost savings, efficiency, and service effectiveness.
</li><li>Create and gain alignment on category buying strategies with internal stakeholders.
</li><li>Draft, adjust, and implement purchasing contracts based on stakeholder input.
</li><li>Drive adoption and manage organization-wide agreements within assigned categories.
</li><li>Identify and implement continuous improvement opportunities across procurement processes.
</li><li>Track and report Value for Money (VfM) initiatives.
</li><li>Contribute to cross-functional and cross-organizational sourcing projects.
</li><li>Analyze data to support joint procurement initiatives and increase agreement uptake.
</li><li>Ensure compliance with procurement policies, health &amp; safety, and quality standards.
</li><li>Be accountable for meeting all relevant KPIs.
</li><li>Travel as required to support procurement activities.
</li><li>Perform other duties as needed, aligned with the role&rsquo;s level and responsibilities. 
</li></ul>BEHAVIORAL SKILLS/COMPETENCIES:
<div>1. Strategic Thinking
</div><ul><li>Aligns sourcing actions with business goals and anticipates supply risks and opportunities.
</li></ul><div>2. Negotiation &amp; Influence
</div><ul><li>Skilled in achieving favorable outcomes while maintaining strong supplier relationships.
</li></ul><div>3. Collaboration
</div><ul><li>Works effectively with internal teams and stakeholders to meet shared goals.
</li></ul><div>4. Communication
</div><ul><li>Clear and confident communicator, able to convey complex ideas simply.
</li></ul><div>5. Initiative &amp; Problem Solving
</div><ul><li>Proactively identifies and addresses issues, driving continuous improvement.
</li></ul><div>6. Customer Focus
</div><ul><li>Prioritizes internal customer needs and maintains high service levels.
</li></ul><div>7. Procurement Expertise
</div><ul><li>Solid understanding of sourcing, category management, and contract negotiation.
</li></ul><div>8. Data-Driven Decision Making
</div><ul><li>Uses data to support sourcing strategies, track savings, and guide decisions.
</li></ul><div>9. Compliance &amp; Risk Awareness
</div><ul><li>Ensures adherence to policies, quality, safety, and regulatory standards.
</li></ul><div>10. Results Orientation
</div>Focused on meeting KPIs related to cost, efficiency, and service delivery. 
<ul><li>
</li></ul>EXPERIENCE/EDUCATION/SKILL-SET REQUIRED:
<ul><li>Degree in supply chain or min 5 years experience in a similar role.</li></ul></div>

Procurement Manager: Dammam 2nd Industrial City

<div>
 
 Job Description
 
 
 
 Fiber Glass Systems is looking for a Manufacturing Engineer to join our high-performance team at the Mt. Union Manufacturing facility, our highest-volume production site. This role is critical to ensuring reliable, efficient, and safe operation of all manufacturing equipment across the facility. The ideal candidate will bring strong technical skills, hands-on troubleshooting experience, and a proactive mindset for continuous improvement.
 
 
 As a Manufacturing Engineer, you will lead the development and execution of preventive maintenance strategies, manage machinery control systems, and support capital improvement efforts. You&rsquo;ll collaborate closely with Maintenance, Quality, and R&amp;D Engineering teams to address operational challenges and drive improvements in equipment performance, reliability, and safety. This is a key role that requires strong problem-solving skills, attention to detail, and the ability to manage multiple priorities and projects in a fast-paced manufacturing environment.
 
 
 
 Primary Responsibilites
 
 
 
 <ul>
 <li>
 Maintaining and ensuring efficient operation of all manufacturing equipment at the Mt. Union facility
 </li>
 <li>
 Manage and maintain machinery computer control systems
 </li>
 <li>
 Creating and continuously developing preventive maintenance programs to ensure performance and durability of the facility equipment
 </li>
 <li>
 Direct maintenance department in providing maintenance and fabrication support throughout the facility.
 </li>
 <li>
 Strong aptitude and creativity for equipment troubleshooting
 </li>
 <li>
 Participate in capital budget discussions related to facility maintenance and improvements
 </li>
 <li>
 Assign tasks and duties to maintenance team to minimize downtime related to repairs/maintenance
 </li>
 <li>
 Capability to manage multiple contractors on projects while ensuring all parties follow HSE policies and facility safety regulations
 </li>
 <li>
 Ensure efficient operation of all electrical equipment
 </li>
 <li>
 Comply with all NOV Company and HSE policies and procedures.
 </li>
 <li>
 Coordinate and manage activities concerned with technical developments.
 </li>
 <li>
 Provide information used in preparation of technical procedures for tooling
 </li>
 <li>
 Work with Quality Assurance and R&amp;D Engineering to provide support on opportunities or issues
 </li>
 <li>
 Interface with R&amp;D Engineering to schedule and monitor necessary testing and development support
 </li>
 <li>
 Other duties as assigned
 
 
 </li>
 </ul>
 
 Education &amp; Experience
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s Degree &ndash; Engineering or related discipline
 </li>
 <li>
 At least 3 years of practical experience in a manufacturing environment is preferred.
 </li>
 <li>
 Possess a high-level of technical aptitude and ability to understand engineering, design, and product performance issues
 </li>
 <li>
 Project management experience a plus
 </li>
 <li>
 Familiar with testing, maintaining and repairing, pneumatic and mechanical systems and components
 </li>
 <li>
 Demonstrate safe and proficient use of shop tools (both hand and power)
 </li>
 <li>
 Self-starter yet able to follow instructions as directed, working with minimal supervision
 </li>
 <li>
 Proficient verbal, written and analytical skills
 </li>
 </ul>
</div>

Manufacturing Engineering

<div>
 
 Job Description
 
 
 
 <ul>
 <li>
 Performing preventative maintenance on all assigned equipment and operating systems.
 </li>
 <li>
 Maintain Production and Facility Equipment to promote UP time and lessen Downtime.
 </li>
 <li>
 Clean and inspect equipment, repair/replace broken parts.
 </li>
 <li>
 Maintain machinery according to Preventative Maintenance Program
 </li>
 <li>
 Troubleshoot equipment.
 </li>
 <li>
 Maintain a safe and clean work area with proper housekeeping and origination of tools and supplies.
 </li>
 <li>
 Coordinating and performing duties related to all maintenance such as servicing, repair of facilities equipment including machinery maintenance task.
 </li>
 <li>
 Track maintenance activities in CMMS (Computerized Maintenance Management System)
 </li>
 <li>
 Wear appropriate PPE.
 </li>
 <li>
 Comply with all Company policies, guidelines, and procedures.
 </li>
 <li>
 Comply with all HSE policies, guidelines, and procedures.
 </li>
 <li>
 Comply with all Quality policies, guidelines, and procedures.
 </li>
 <li>
 Perform other work-related tasks as assigned.
 </li>
 <li>
 Maintain clean and neat work area.
 </li>
 <li>
 Fabricate and install new equipment.
 </li>
 <li>
 Utilize safe work habits.
 </li>
 <li>
 Maintain parts and tools inventory.
 
 
 </li>
 </ul>
 
 Education/Qualifications
 
 
 
 Minimum Two-year technical degree in Mechanical OR Electrical OR related field or equivalent is required.
 
 
 
 Experience Required
 
 
 
 Minimum 3-5 experience in Performing Maintenance of CNC Machines is required.
 
 
 
 About Us
 
 
 
 Every day, the oil and gas industry&rsquo;s best minds put more than 150 years of experience to work to help our customers achieve lasting success.
 
 
 
 We Power the Industry that Powers the World
 
 
 
 Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success&mdash;now and in the future.
 
 
 
 Global Family
 
 
 
 We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work.
 
 
 
 Purposeful Innovation
 
 
 
 Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better.
 
 
 
 Service Above All
 
 
 
 This drives us to anticipate our customers&rsquo; needs and work with them to deliver the finest products and services on time and on budget.
 
 
 
 About The Team
 
 
 
 
 Corporate
 
 
 
 Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.
</div>

Maintenance Technician

Join NOV and explore 12   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

NOV