Qureos Mentor

PGESCO

<div>
 
 
 ROLE SUMMARY
 
 
 
 
 
 
 The Mechanical, Piping &amp; Equipment Installation Engineer is responsible for overseeing all mechanical installation activities across the assigned project packages, including static and rotating equipment, pressure vessels, heat exchangers, pumps, valves, piping systems, and associated supports.
 
 
 
 
 
 
 KEY RESPONSIBILITIES
 
 
 
 
 
 <ul>
 <li>
 Supervise mechanical equipment erection, alignment, and commissioning preparation activities on-site
 </li>
 <li>
 Oversee piping fabrication, spool erection, hydrotesting, and pre-commissioning activities per approved specifications and P&amp;IDs
 </li>
 <li>
 Review pipe support designs, isometric drawings, and equipment layout drawings for constructability
 </li>
 <li>
 Coordinate with QA/QC team for NDT, pressure testing, and inspection hold points per approved ITPs
 </li>
 <li>
 Verify equipment installation against vendor drawings, data sheets, and technical requirements
 </li>
 <li>
 Monitor compliance of piping material with approved MAS documents (ASTM, API, EN standards)
 </li>
 <li>
 Participate in pre-installation inspections and material traceability checks at fabrication facilities where required
 </li>
 <li>
 Coordinate with QA/QC team on, punch list preparation, and resolution of NCRs
 </li>
 <li>
 Support engineering with field queries and technical deviation requests during construction
 </li>
 <li>
 Maintain up-to-date equipment erection records, pressure test packages, and punch lists
 </li>
 </ul>
 
 
 
 
 
 QUALIFICATIONS &amp; REQUIREMENTS:
 
 
 
 
 
 <ul>
 <li>
 Minimum 10 years of experience in mechanical piping and equipment installation within power generation or heavy industrial construction
 </li>
 <li>
 Valid UAE Residence Visa and Emirates ID &ndash; mandatory at time of application
 </li>
 <li>
 Proven experience on gas turbine power stations, water treatment, or industrial process plant projects
 </li>
 <li>
 Familiarity with API 650, ASME B31, and related piping and pressure vessel codes
 </li>
 <li>
 Experience working under third-party inspection and EPCM quality regime
 </li>
 <li>
 Bachelor's Degree in Mechanical Engineering
 </li>
 <li>
 Strong working knowledge of pipe stress, support design concepts, and constructability review
 </li>
 <li>
 Experience with rotating equipment alignment, grouting, and pre-commissioning activities
 </li>
 <li>
 Familiarity with UAE utility-sector technical standards is a strong advantage
 </li>
 <li>
 Proficiency in AutoCAD, Navisworks, or equivalent tools for drawing review
 </li>
 </ul>
</div>

Mechanical Engineer-Power Plants Background

<div>
 
 
 ROLE SUMMARY:
 
 
 
 
 
 
 The Civil Engineer will supervise and manage all civil construction activities across the assigned project packages, encompassing structural concrete works, foundations, piling (where applicable), underground drainage, road works, cable trench civil works, and structural steel erection interfaces.
 
 
 
 
 
 
 KEY RESPONSIBILITIES:
 
 
 
 
 
 <ul>
 <li>
 Supervise all civil construction activities including earthworks, concrete foundations, structural slab construction, and drainage systems.
 </li>
 <li>
 Review and comment on civil submittals including shop drawings, method statements, and material approval requests for concrete, rebar, and formwork.
 </li>
 <li>
 Monitor concrete pours, rebar placement, and formwork activities to ensure compliance with approved mix designs and structural drawings.
 </li>
 <li>
 Coordinate with the structural steel and MEP teams for embedded anchor bolts, sleeves, and penetration planning.
 </li>
 <li>
 Verify that underground drainage, cable trenches, and duct banks are constructed per approved civil drawings.
 </li>
 <li>
 Monitor subgrade preparation, backfill compaction testing, and surfacing works.
 </li>
 <li>
 Review RFIs, technical deviations, and non-conformances related to civil scope and recommend resolution.
 </li>
 <li>
 Support pre-commissioning and system handover by ensuring all civil works are punch-listed and cleared.
 </li>
 </ul>
 
 
 
 
 
 QUALIFICATIONS &amp; JOB REQUIREMENTS:
 
 
 
 
 
 <ul>
 <li>
 Minimum 10 years of civil construction experience in industrial, power generation, or heavy infrastructure projects.
 </li>
 <li>
 Valid UAE Residence Visa and Emirates ID &ndash; mandatory at time of application.
 </li>
 <li>
 Demonstrated experience with reinforced concrete, foundation systems, and structural works in industrial environments.
 </li>
 <li>
 Familiarity with BS 8110, ACI 318, or equivalent structural and concrete codes applicable to UAE projects.
 </li>
 <li>
 Experience working within EPCM or PMC project delivery frameworks on major industrial plants.
 </li>
 <li>
 Bachelor's Degree in Civil or Structural Engineering.
 </li>
 <li>
 Experience with AutoCAD and site survey tools for setting-out and verification of as-built works.
 </li>
 <li>
 Knowledge of Dubai municipality requirements and Dubai Building Code.
 </li>
 <li>
 Proven ability to manage Executing Company civil subcontractors and coordinate multi-discipline interface issues.
 </li>
 <li>
 Strong documentation skills for RFI management, inspection records, and as-built mark-ups.
 </li>
 </ul>
</div>

Project Civil Coordinator

<div>
 
 
 Position Summary:
 
 
 
 
 
 
 Design Pipe Support and perform complex stress analyses cases for critical lines; lead report preparation and mentoring; ensure compliance with ASME/API/ISO and WRC guidance; drive support selection and loads to structures.
 
 
 
 
 
 
 Duties and responsibilities:
 
 
 
 
 
 <ul>
 <li>
 Locate Piping supports location.
 </li>
 <li>
 Design Piping Supports Steel frames
 </li>
 <li>
 Perform comprehensive static.
 </li>
 <li>
 Collaborate on stress Standards/ specification tasks and confirm accuracy of related documentation.
 </li>
 <li>
 Buried Piping Systems: Conduct stress analysis for underground piping.
 </li>
 <li>
 Draft standard &amp; special pipe support details (springs/hangers/guides/struts) and fill out data sheets.
 </li>
 <li>
 Issue loads to structural/civil; confirm combinations and support types.
 </li>
 <li>
 Prepare and sign off stress sketches and reports for owned systems.
 </li>
 <li>
 Review isometrics and piping arrangements for constructability and support adequacy.
 </li>
 </ul>
 
 
 
 
 
 Qualifications required:
 
 
 
 
 
 <ul>
 <li>
 B.Sc. (Mechanical or Civil).
 </li>
 <li>
 Design Steel Structure Frames.
 </li>
 <li>
 Solid command of ASME B31.3/B31.1, API equipment codes, and WRC bulletin application in CAESAR II workflows.
 </li>
 <li>
 Experience with 3D modeling programs (e.g., AVEVA, Auto Plant 3D, Smart Plant 3D) and AutoCAD.
 </li>
 <li>
 0-2 years of experience with engineering roles within industries like Power, Oil &amp; Gas, or Fertilizers.
 </li>
 </ul>
 
 
</div>

Jr.Piping Stress Support Engineer

Join PGESCO and explore 4   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

PGESCO

About Company

Mechanical Engineer-Power Plants Background

Site Civil- Power Plants Background

Project Civil Coordinator

Jr.Piping Stress Support Engineer