Qureos Mentor

ADASI

<div>
 
 External Job Description
 
 
 
 
 Job Title: Senior Embedded Software Engineer
 
 
 
 
 Job Responsibilities
 
 
 
 Design, develop, and maintain embedded software for avionics, flight control, and aerospace systems. Implement software for real-time systems, ensuring low latency and high reliability of critical functions. Collaborate with system engineers to translate control algorithms and requirements into embedded code.
 
 
 Integrate software with hardware systems and conduct testing to ensure functionality, performance, and safety compliance. Develop software aligned with standards such as DO-178C and DO-254. Optimize code for memory, power efficiency, and performance while following best practices.
 
 
 Maintain documentation including software design, code, and test results. Work closely with cross-functional teams such as hardware, systems, and QA for seamless integration. Identify and resolve defects, anomalies, and performance issues through debugging and analysis. Stay updated with emerging technologies and industry practices.
 
 
 
 Education And Qualifications
 
 
 
 Bachelor&rsquo;s degree in Computer Engineering, Electrical Engineering, or related field (Master&rsquo;s preferred). Minimum 8 years of experience in embedded software development, preferably in aerospace or safety-critical domains. Strong hands-on expertise in C and C++ for embedded systems. Experience with microcontroller architectures such as ARM or STM32 and low-level hardware interfacing.
 
 
 
 Technical Competencies
 
 
 
 Strong expertise in C/C++ programming and embedded systems development. In-depth knowledge of microcontrollers and hardware interfacing. Solid understanding of real-time operating systems and real-time design principles. Experience with communication protocols including UART, SPI, I2C, CAN, and Ethernet.
 
 
 #ADASI
</div>

Senior Embedded Software Engineer

<div>
 
 External Job Description
 
 
 
 
 Position -
 
 Principal Mechanical Engineer - Loads / Stress
 
 
 
 Entity :
 
 ADASI
 
 
 
 Department
 
 -Engineering Services
 
 
 
 Location-
 
 Abu Dhabi
 
 
 
 Key Responsibiities-
 
 
 
 <ul>
 <li>
 Develop aircraft-level loads for UAV systems, including: Maneuver loads (limit and ultimate cases) ,Gust and turbulence loads (where applicable) ,Ground loads (landing, taxi, handling, transportation) ,Propulsion and system-induced loads (thrust, inertia, vibration drivers) Payload and mission-dependent loads
 </li>
 <li>
 Translate mission profiles and operational scenarios into design loads, working closely with Flight Mechanics, Aerodynamics, Systems, and Test teams.
 </li>
 <li>
 Define load cases, combinations, and envelopes, ensuring: Internal consistency across disciplines, Traceability to assumptions and mission definitions ,Practical usability by stress and design teams
 </li>
 <li>
 Establish and document loads methodologies, including: Assumptions and simplifications appropriate for UAV development ,Use of empirical data, hand methods, and analytical models , Clear definition of validity ranges and limitations
 </li>
 <li>
 Perform analytical and numerical loads analysis, using- First-principles calculations (free-body diagrams, inertia relief, load paths) Simplified models (beam models, lumped masses)FEM (primarily for load extraction and distribution, not detailed stress sizing)
 </li>
 <li>
 Provide load inputs to stress, design, and systems teams, including-Section loads, interface loads, and component-level loads ,Time histories or envelopes when required ,Clear definition of coordinate systems and reference conditions
 </li>
 <li>
 Support multidisciplinary integration, ensuring loads are aligned with: Mass properties and CG evolution, Control laws and flight envelope assumptions ,Structural layouts and load paths
 </li>
 <li>
 Contribute to test definition and correlation, including: Ground and flight test instrumentation strategies (strain gauges, accelerometers) Back-calculation of loads from test data ,Updating models and assumptions based on test evidence
 </li>
 <li>
 Act as a situational technical leader by driving resolution of ambiguous or conflicting inputs ,Challenging unrealistic assumptions ,Providing technically sound direction during design reviews and critical decisions
 </li>
 <li>
 Continuously improve engineering practices, contributing to: Loads process definition and refinement templates, calculation methods, and internal guidelines , Knowledge sharing across programs
 
 
 </li>
 </ul>
 
 Educational Background
 
 :
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Mechanical or Aerospace Engineering (Master&rsquo;s or PhD preferred)
 
 
 </li>
 </ul>
 
 Professional Experience:
 
 
 
 <ul>
 <li>
 Strong understanding of aircraft loads development, including maneuver, gust, and ground loads
 </li>
 <li>
 Ability to translate real-world missions into engineering load cases, avoiding over-idealization
 </li>
 <li>
 Solid grasp of:
 
 
 </li>
 </ul>
 Rigid-body dynamics and inertia effects
 
 
 Load paths and structural interaction
 
 
 <ul>
 <li>
 Basic aeroelastic considerations (at least at conceptual level)
 </li>
 <li>
 Experience with: Analytical tools (Excel, Python, MATLAB or similar) FEM tools (ANSYS, NASTRAN, Abaqus) for load extraction and distribution
 </li>
 <li>
 Comfortable working with incomplete data, making justified engineering assumptions
 
 
 </li>
 </ul>
 Standards &amp; Compliance
 
 
 <ul>
 <li>
 Familiarity with aerospace standards (EASA, FAA, MIL-STD) as guidance frameworks, with the ability to scale and adapt them to UAV and non-certified platforms
 
 
 </li>
 </ul>
 
 Preferred Certifications
 
 
 
 <ul>
 <li>
 Chartered Engineer (CEng) or Professional Engineer (PE) (nice to have)
 </li>
 <li>
 Experience contributing to internal methods, tools, or engineering processes
 
 
 </li>
 </ul>
 
 #ADASI
 
</div>

Principal Mechanical Engineer - Loads / Stress

Join ADASI and explore 2   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

ADASI

About Company

Senior Embedded Software Engineer

Principal Mechanical Engineer - Loads / Stress