Qureos Mentor

Advanced Metals Company (AMCO)

<div>
 <ul>
 <li>
 
 Role Purpose:
 
 </li>
 </ul>
 
 
 
 
 To oversee the adherence to all Safety, Health &amp; Environment Compliance. Drive towards a &ldquo;Zero &ndash; Accident&rdquo; culture. To oversee the completion of all hazards rose through Safety walk around, Safe-start card and hazard notification.
 
 
 
 
 <ul>
 <li>
 
 Key Responsibilities and Accountabilities :
 
 </li>
 </ul>
 
 
 
 
 Including but not limited to:
 
 <ul>
 <li>
 To maintain, develop and continually improve the company&rsquo;s existing integrated management for Safety, Health &amp; Environment aspects of the business
 </li>
 <li>
 Ensure that all employees follow safety and environment rules and receive proper training in the use of the facility equipment.
 </li>
 <li>
 Responsible for diving the service center safety culture towards &ldquo;Zero &ndash; Accident&rdquo; tolerance, with a particular focus on &ldquo;safety behavior&rdquo; at all levels
 </li>
 <li>
 All accidents investigated and reported upon within the time frame set forth by the company
 </li>
 <li>
 Plan and organize the internal audit program of the Service Center. Face all external third party audits and initiate necessary Corrective &amp; Preventive actions.
 </li>
 <li>
 Arrange and minute EHS progress &amp; annual EHS management review meetings.
 </li>
 <li>
 Identify training needs for all staffs to comply with local, Legal &amp; Group requirements,
 </li>
 <li>
 Responsible for vendor EHS appraisal &amp; rating
 </li>
 <li>
 Provides regular communication and updates about any changes to the EHS.
 </li>
 </ul>
 
 Demonstrate evidences on:
 
 <ul>
 <li>
 Implementation of relevant EMS standards.
 </li>
 <li>
 Establishment of a Health &amp; Safety Management program.
 </li>
 </ul>
 
 Audit reports, internal Non-conformances, customer complaints &amp; customer compliments.
 
 
 
 
 <ul>
 <li>
 
 Education and Qualifications:
 
 </li>
 </ul>
 
 
 
 <ul>
 <li>
 Degree or equivalent in engineering and specialized in H&amp;S and Environmental management
 </li>
 <li>
 A minimum of 6 years of experience in Oil &amp; Gas sector involving Machining, Welding &amp; NDT activities or 3 years in a similar post preferably in O&amp;G service sector.
 </li>
 <li>
 Qualified EMS &amp; OHSAS Lead Auditor - IRCA registered Training Course Certificate.
 </li>
 <li>
 NEBOSH certification
 </li>
 <li>
 Ability to develop a safety culture, with particular emphasis on &ldquo;behavioral&rdquo; safety
 </li>
 <li>
 Vast experience of maintaining and developing integrated management systems.
 </li>
 <li>
 Strong influencing skills, interpersonal, leadership skills, ability to communicate at all levels &amp; PC and presentation skills.
 </li>
 <li>
 Ability to work together, share experience and train &amp; motivate sub-ordinates.
 </li>
 </ul>
 
 
 Reasoning Ability:
 
 
 <ul>
 <li>
 Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
 </li>
 </ul>
 
 
 Computer Skills:
 
 
 <ul>
 <li>
 Be a computer literate with MS Office &amp; Windows exposure
 </li>
 </ul>
 
 
 Language Skills:
 
 
 <ul>
 <li>
 Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
 </li>
 </ul>
 
 
 Certificates, Licenses, Registrations:
 
 
 
 IGC NEBOSH or IOSH or Qualified EMS &amp; OHSAS Internal Auditor.
 
 
 
 
 <ul>
 <li>
 
 HSE Responsibilities:
 
 </li>
 </ul>
 
 
 
 <ul>
 <li>
 Ensure the implementation of the Company EHS Policy for the prevention of injury, damage or loss to Company personnel and resources.
 </li>
 <li>
 Adhere to the risk assessment controls identified.
 </li>
 <li>
 Not interfere or misuse any equipment supplied.
 </li>
 <li>
 Maintain equipment supplied for carrying out work tasks including daily maintenance where appropriate.
 </li>
 <li>
 Be the custodian of and responsible for the development and maintenance of the EHS Management Systems including auditing and reporting on performance to the Senior Management Teams.
 </li>
 <li>
 Be responsible for EHS policy &amp; standards formulation, development and implementation.
 </li>
 <li>
 Ensure the continued implementation of a Companywide EHS management system.
 </li>
 <li>
 Ensure the compatibility of EHS systems and objectives with the business objectives and ensure that there is a harmonization of EHS objectives with broader business objectives.
 </li>
 <li>
 Ensure the promotion of a positive health and safety culture, and establishment of EHS risk control strategies and requirements.
 </li>
 <li>
 Ensure the planning for EHS continual improvement including the setting of short and long term objectives, deciding priorities and establishing adequate performance standards.
 </li>
 <li>
 Ensure the monitoring, reviewing and provision of feedback on the policy, plans and management system.
 </li>
 <li>
 Ensure the auditing of the EHS system and performance to ensure legal compliance and company policy.
 </li>
 <li>
 Custodian of the Work co-ordinator role. Ensure training has been provided to Management and the leaders of the Injury Management procedure. Duties include the duty assignment along with the return to work assessment being conducted.
 </li>
 <li>
 Use personal protective equipment supplied in accordance with site risk assessments and site rules.
 </li>
 <li>
 Attend any suitable training to ensure that they are competent to perform their duties safely.
 </li>
 <li>
 Comply with any rules specific to a particular site and any Company wide health, safety or environmental requirements.
 </li>
 <li>
 Report any injuries, unsafe acts or conditions to line managers.
 </li>
 <li>
 Support EHS policy to help deliver cultural development and sustained continual improvement in EHS performance.
 </li>
 </ul>
 
 
</div>

Health Safety Environment Officer

<div>
 
 Role Purpose
 
 
 
 Maintain standards and controls within the shop by checking the work at pre-determined stages.
 
 
 
 Job Accountabilities &amp; Activities
 
 
 
 <ul>
 <li>
 Allocate work via routing sheet to machinists
 </li>
 <li>
 Assist the machinist in setting up of jobs in the machine, where necessary.
 </li>
 <li>
 Maintain standards and controls within the shop by checking the work at pre-determined stages.
 </li>
 <li>
 Report non-conformance to QC supervisor.
 </li>
 <li>
 Raise material requisition for tools and other requirements.
 </li>
 <li>
 Report to Superintendent on jobs completion, back-log, training requirements and other needs of the department.
 </li>
 <li>
 Ensure the shop is maintained clean &amp; tidy, and all equipment&rsquo;s are used in a safe manner.
 </li>
 <li>
 Provide man-hour consumption, material requirement and other details to sales department / estimators to prepare estimate / quotation.
 </li>
 <li>
 Plan &amp; schedule the jobs and distribute among the available manpower and machines.
 </li>
 <li>
 Follow up with Inspection Company to know the in-coming jobs and plan accordingly, to meet the delivery schedule.
 </li>
 <li>
 Follow up with customers &amp; sales department for required accessories to complete a job.
 </li>
 <li>
 Meet the emergency requirements by rescheduling of jobs for quick turn around and to increase the revenue.
 </li>
 <li>
 Planning of jobs during weekends and eid-holidays to minimize the over time
 
 
 </li>
 </ul>
 
 Education &amp; Certifications
 
 
 
 Degree in Mechanical engineering
 
 
 
 Required Years Of Experience
 
 
 
 7-8 years of experience
</div>

Supervisor, Shop

Join Advanced Metals Company (AMCO) and explore 2   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

Advanced Metals Company (AMCO)

ABOUT_COMPANY

Health Safety Environment Officer

Supervisor, Shop