Qureos Mentor

BEAD Architects & Engineers

We are seeking qualified and experienced professionals to join our reputable Architectural and Engineering Consultancy Firm in the UAE. Candidates must demonstrate strong technical knowledge, attention to detail, and the ability to work effectively in a fast-paced project environment.Responsibilities:1. Ensure all construction activities comply with the Abu Dhabi Occupational Safety and Health Center (OSHAD) requirements, UAE regulations, and project HSE standards.2. Review and approve contractors&rsquo; HSE plans, risk assessments, method statements, and emergency response plans.3. Conduct regular site safety inspections and audits to ensure compliance with approved HSE procedures.4. Monitor contractors&rsquo; compliance with site safety rules, PPE requirements, and safe work practices.5. Identify potential hazards and unsafe conditions and ensure corrective actions are implemented promptly.6. Participate in project safety meetings, toolbox talks, and coordination meetings with contractors and project stakeholders.7. Review and monitor permit-to-work systems including hot work, confined space entry, lifting operations, and work at height.8. Investigate incidents, accidents, and near-misses, prepare reports, and recommend preventive measures.9. Ensure proper safety arrangements for VIP areas, access control, and public safety within the project site.10. Monitor high-risk construction activities such as excavation, scaffolding, lifting operations, and structural works.11. Verify that safety signage, barricades, and emergency equipment are properly installed and maintained.12. Ensure proper environmental protection measures, including waste management, dust control, and noise mitigation.13. Review HSE documentation, safety reports, and inspection records submitted by contractors.14. Ensure contractors conduct regular safety training and toolbox talks for workers and supervisors.15. Coordinate with client representatives, project managers, and regulatory authorities on HSE matters.16. Monitor compliance with project-specific HSE requirements for VIP projects, including enhanced safety, security, and quality standards.17. Prepare daily, weekly, and monthly HSE reports highlighting safety performance, risks, and corrective actions.18. Ensure all works comply with international HSE standards such as International Organization for Standardization ISO 45001 Occupational Health and Safety Management Systems.General Requirements &amp; Qualifications:<ul><li>Bachelor&rsquo;s degree in Engineering, Environmental Science, Occupational Health &amp; Safety, or a related field.</li><li>Professional certifications such as NEBOSH, IOSH, ISO 9001, ISO 14001, or ISO 45001 are highly preferred.</li><li>Minimum 5 years of experience in HSE roles within the construction/consultancy or related industries in the UAE or GCC.</li><li>Experience in auditing, incident investigation, and preparing QHSE documentation.</li><li>Familiarity with risk assessment methodologies and emergency response planning.</li></ul>Send your CV with the position title in the subject line to: [info@bead-architects.com]Note: Only shortlisted candidates will be contacted.Job Type: Full-timePay: AED6,000.00 - AED7,000.00 per monthWork Location: In person

HSE Engineer

We are currently hiring a qualified Document Controller to join our team for an upcoming project based in Abu Dhabi, UAE.Please note that don't have walk-in applications, we will contact shortlisted candidates only! Please do not call our office. Qualification &amp; Experience:<ul><li>Diploma or degree in Construction Management, Project Management, Business Administration, or a related field.</li><li>Minimum 5 years&rsquo; experience in document control within the construction/consultancy industry</li><li>Familiarity with industry standards, such as ISO 9001, and project documentation practices.</li><li>Advanced proficiency in Microsoft Office (Word, Excel, and Outlook).</li></ul>Knowledge, Skills &amp; Abilities :<ul><li>Strong understanding of construction industry processes and documentation requirements.</li><li>Proficiency in document control software and systems (e.g., Aconex, Procore, Primavera, or similar).</li><li>Excellent organizational skills with a high level of attention to detail.</li><li>Strong communication and interpersonal skills.</li><li>Ability to work under pressure and meet tight deadlines.</li><li>Problem-solving and analytical thinking abilities.</li></ul>Responsibilities:1. Set up and maintain a systematic filing system (physical and digital) for all project documentation.2. Ensure that the document management system is updated, secure, and accessible to authorized personnel.3. Receive, register, track, and distribute incoming and outgoing documents, including drawings, specifications, RFIs (Requests for Information), submittals, and contracts.4. Assign document numbers, control revision statuses, and ensure all documents are appropriately categorized and indexed.5. Ensure version control and prevent the use of obsolete documentation.6. Ensure all documents comply with company and regulatory standards, including ISO certifications or other quality assurance frameworks.7. Monitor deadlines and maintain records of approvals, rejections, and revisions.8. Act as the primary point of contact for document-related queries within the project team and with external stakeholders, such as contractors, consultants, and clients.9. Support the preparation, distribution, and retrieval of documents during audits and inspections.10. Oversee the secure archiving of project documentation upon completion of the project.11. Manage requests for document retrieval and provide access to historical records as required.12. Prepare and present regular status reports on document control activities.13. Identify and report any document discrepancies or risks to project timelines.Send us your updated CV and mention the following:Notice period:Current Salary:Current Address:Job Type: Full-timePay: AED4,000.00 - AED5,000.00 per monthWork Location: In person

Document Controller- Site Based

We are currently hiring a qualified QS cum Planning Engineer to join our team for an upcoming project based in Abu Dhabi, UAE.Please note that don't have walk-in applications, we will contact shortlisted candidates only! Please do not call our office.Qualification &amp; Experience:<ul><li>Bachelor&rsquo;s degree in Civil Engineering, Construction Management, or a related field.</li><li>Minimum 5&ndash;8 years of experience as a QS/Planning Engineer, preferably in the UAE or GCC region.</li><li>Experience in managing schedules for large-scale construction projects (residential, commercial, infrastructure).</li><li>Familiarity with Abu Dhabi&rsquo;s construction regulations and local authority requirements is preferred.</li><li>Certification in project management (e.g., PMP, PSP) is an advantage.</li><li>Advanced proficiency in Microsoft Office (Excel, Word, PowerPoint).</li></ul>Knowledge, Skills &amp; Abilities:<ul><li>Proficiency in scheduling tools like Primavera P6 &amp; &amp; Plan swift.</li><li>Strong understanding of construction processes, techniques, and methodologies.</li><li>Ability to perform delay analysis and prepare extension-of-time (EOT) claims.</li><li>Excellent problem-solving and analytical skills.</li><li>Strong communication and interpersonal skills for stakeholder engagement</li><li>Attention to detail and ability to handle multiple tasks simultaneously.</li></ul>Responsibilities:<ul><li>Prepare and review bills of quantities, cost estimates, and tender documents.</li><li>Monitor project budgets and track variations and cost implications.</li><li>Evaluate contractor claims, variations, and payment applications.</li><li>Provide cost advice and support to the project team throughout all stages of construction.</li><li>Liaise with contractors, consultants, and clients to ensure accurate and timely cost reporting.</li><li>Assist in contract administration and ensure compliance with contractual terms.</li><li>Develop and maintain comprehensive project schedules using software such as Primavera P6 or MS Project.</li><li>Identify project milestones, critical paths, and key deliverables to ensure timely completion.</li><li>Establish baseline schedules and track variances against actual progress.</li><li>Monitor and analyze project progress on a regular basis, providing detailed progress reports to stakeholders.</li><li>Conduct site visits to verify work progress and align it with the project schedule.</li><li>Evaluate contractor schedules and highlight any discrepancies or risks.</li><li>Identify potential delays and risks affecting the project timeline.</li><li>Recommend and implement corrective actions to address schedule slippage.</li><li>Assist in resolving scheduling conflicts and resource constraints.</li><li>Collaborate with project managers, engineers, contractors, and subconsultants to integrate schedules and ensure alignment with project objectives.</li><li>Conduct regular meetings to review project schedules and progress updates.</li><li>Act as a liaison between the planning team and other project stakeholders.</li><li>Assess resource requirements for the project and ensure optimal utilization.</li><li>Monitor and forecast manpower, equipment, and material needs to avoid project delays.</li><li>Prepare weekly and monthly progress reports, including S-curves, Gantt charts, and project status updates.</li><li>Provide analysis on earned value management (EVM) to measure project performance.</li><li>Ensure project planning and scheduling practices comply with industry standards and client requirements.</li><li>Incorporate local regulations and Abu Dhabi-specific requirements into project schedules.</li></ul>Job Type: Full-timePay: AED5,000.00 - AED6,000.00 per monthWork Location: In person

Planning Engineer cum Quantity Surveyor

We are seeking qualified and experienced professionals to join our reputable Architectural and Engineering Consultancy Firm in the UAE. Candidates must demonstrate strong technical knowledge, attention to detail, and the ability to work effectively in a fast-paced project environment.Responsibilities:1. Conduct inspections of MEP systems such as HVAC, electrical, fire protection, plumbing, and drainage.2. Ensure materials, equipment, and installations comply with approved drawings and specifications.3. Identify defects or non-conformances and recommend corrective actions.4. Supervise and witness testing and commissioning of MEP systems.5. Verify that testing results meet project requirements and standards.6. Maintain records of inspections, test reports, and quality issues.7. Review contractors&rsquo; shop drawings, material submittals, and method statements.8. Coordinate with contractors, consultants, and project stakeholders.9. Provide technical support on MEP-related matters.10. Attend project meetings to discuss progress and quality issues.11. Ensure compliance with building codes, safety regulations, and industry standards.12. Monitor safety practices during MEP installation and testing.13. Track progress of MEP works and report delays or risks.14. Assist in coordinating MEP works with other construction activities.General Requirements &amp; Qualifications:<ul><li>Diploma or degree in Mechanical, Electrical, or Plumbing Engineering, or a related discipline.</li><li>Minimum 8 years experience in MEP inspection or quality control</li><li>Familiarity with construction management software and tools (e.g., AutoCAD, BIM, or similar).</li><li>Certification in quality assurance/inspection (e.g., QA/QC certification, Aabu Dhabi Engineer&rsquo;s License Card, or equivalent) is an advantage.</li><li>Working knowledge of safety regulations and procedures in the construction industry.</li></ul>Send your CV with the position title in the subject line to: [info@bead-architects.com]Note: Only shortlisted candidates will be contacted.Job Type: Full-timeWork Location: In person

MEP Inspector

We are seeking qualified and experienced professionals to join our reputable Architectural and Engineering Consultancy Firm in the UAE. Candidates must demonstrate strong technical knowledge, attention to detail, and the ability to work effectively in a fast-paced project environment.Civil Inspector<ul><li>Supervise and inspect civil and structural works to ensure quality, safety, and compliance with approved drawings.</li><li>Monitor construction progress, prepare inspection reports, and highlight non-conformities.</li><li>Ensure timely resolution of technical site issues.</li></ul>General Requirements &amp; Qualifications:<ul><li>Education: Bachelor&rsquo;s Degree in the relevant engineering discipline from a recognized institution.</li><li>Experience: Minimum 8 years of UAE-based experience working with Architectural and Engineering Consultancy Firms.</li><li>Knowledge: Familiarity with UAE construction regulations, building codes, and industry standards.</li><li>Skills: Strong communication, report writing, and problem-solving skills; proficiency in relevant engineering software.</li></ul>Send your CV with the position title in the subject line to: [info@bead-architects.com]Note: Only shortlisted candidates will be contacted.Job Type: Full-timePay: AED5,000.00 - AED6,000.00 per monthWork Location: In person

Civil Inspector (QA/QC Engineer)

Please read carefully!!!Kindly send your application here in indeed, please submit your detailed CV and we we will contact shortlisted candidates only.Company description:BEAD Architects &amp; Engineers is a progressive and dynamic design firm that provides the entire value-chain from cutting edge Architecture and Urban Planning to providing Structural &amp; MEP Design services through its affiliated companies. Being a contemporary oriented and research-based design firm, BEAD have differentiated itself from the majority of the other regional firms, adding a valuable measure of credibility to its design services.As architects, designers and engineers from BEAD participate in development projects involving research-based architectural design and urban planning, they are able to work with master developers, local agencies, municipal officials and professionals in the field. The most rewarding aspect of our active outreach approach is that we learn how to use progressive design methodology as a tool to advance and negotiate intelligent design solutions to serve and promote your development criteria.At our studio, multiple areas are sought so design, planning and scholarly research go hand in hand. As a matter of fact, a very important difference in BEAD doing the service from other local design firms is the efforts we put in complimenting design tasks with a thorough research effort whether the latter goes into up-to-date design theories, building materials or new construction technologies.It is by contradiction to policies of most of the practicing consultancy firms in the region, BEAD approaches the services of design and architecture as a sacred profession rather than a commercial business.We currently operate out of our Abu Dhabi base, a decent environment of 500 sqm modern offices and employ 20+ high caliber professionals.Responsibilities:1. Perform structural analysis and design of buildings and infrastructure projects in accordance with applicable standards and codes.2. Prepare structural calculations, reports, and technical specifications for project documentation.3. Develop and review structural drawings, reinforcement details, and construction documents.4. Coordinate with architects, MEP engineers, and other disciplines to ensure integration of structural systems with the overall design.5. Review shop drawings, material submittals, and method statements submitted by contractors.6. Conduct site inspections to ensure structural works are executed according to approved drawings and specifications.7. Provide technical guidance during construction and project execution.8. Ensure compliance with local authority requirements and submissions to Abu Dhabi City Municipality and Department of Municipalities and Transport during construction.9. Investigate and resolve structural issues, design modifications, and construction challenges Review, comment, and raise recommendations to the Director of Construction Supervision, on Contractor&rsquo;s materials and engineering submittals.10. Assist BEAD&rsquo;s team in matters related to construction works.11. Ensure works are complying with the regulations of local authorities.12. Contribute in technical meetings at site, as well as at Head office whenever required.13. Clarify and respond to RFI and questions raised by the Contractor and provide solutions.14. Coordinate with all other disciplines for works within the overall project.Knowledge, Skills &amp; Abilities:<ul><li>Strong knowledge of structural design principles for reinforced concrete, steel, and other construction materials.</li><li>Familiarity with international design codes and standards.</li><li>Understanding of geotechnical principles and foundation design.</li><li>Knowledge of construction techniques, materials, and structural detailing.</li><li>Familiarity with structural analysis and modeling software such as SAP, ETABS and drafting tools like AutoCAD.</li><li>Knowledge of UAE building regulations and engineering standards.</li><li>Strong analytical and problem-solving skills in structural engineering design.</li><li>Ability to interpret architectural drawings and integrate structural systems effectively.</li><li>Excellent technical reporting and documentation skills.</li><li>Good coordination and communication skills with multidisciplinary teams.</li><li>Ability to review and check engineering drawings and calculations accurately.</li><li>Ability to manage multiple projects and meet deadlines.</li><li>Capability to provide technical solutions during design and construction stages.</li></ul>Qualification &amp; Experience: <ul><li>Bachelor&rsquo;s Degree in Civil Engineering or Structural Engineering from an accredited university.</li><li>Professional membership or eligibility with recognized engineering bodies is an advantage.</li><li>Registration or eligibility for registration with Department of Municipalities and Transport or other UAE engineering authorities is mandatory.</li><li>Training or certification in structural design software and engineering standards.</li><li>Must have 10 years of relevant experience in structural design and analysis within engineering consultancy firms.</li><li>Experience in designing residential, commercial, and mixed-use buildings.</li><li>Experience preparing structural design reports, calculations, and authority submission documents.</li><li>Experience in construction supervision, structural inspections, and coordination with contractors.</li><li>Familiarity with local authority submission procedures and approval processes in Abu Dhabi. Must have a minimum of 8 years specific experience in the supervision of related works at Hi-rise buildings; at all stages of construction and close out phase.</li><li>Multi bilingual; fluent in English language, reading and writing, is a must.</li><li>Good knowledge of contractual clauses and applications in construction as well as FIDIC contracts.</li><li>Good knowledge of technical correspondence, writing and computer applications related to the industry.</li><li>Having a PMP Certificate is an advantage.</li><li>Well versed with IT and related design software as well as web-based applications.</li></ul>Job Type: Full-timePay: AED5,000.00 - AED7,000.00 per monthWork Location: In person

Civil/Structural Engineer

We are accepting online applications only! Please send your detailed CV here in indeed and we will contact shorlisted candidates only!Company Description:BEAD Architects &amp; Engineers is a progressive and dynamic design firm that provides the entire value-chain from cutting edge Architecture and Urban Planning to providing Structural &amp; MEP Design services through its affiliated companies. Being a contemporary oriented and research-based design firm, BEAD have differentiated itself from the majority of the other regional firms, adding a valuable measure of credibility to its design services.As architects, designers and engineers from BEAD participate in development projects involving research-based architectural design and urban planning, they are able to work with master developers, local agencies, municipal officials and professionals in the field. The most rewarding aspect of our active outreach approach is that we learn how to use progressive design methodology as a tool to advance and negotiate intelligent design solutions to serve and promote your development criteria.At our studio, multiple areas are sought so design, planning and scholarly research go hand in hand. As a matter of fact, a very important difference in BEAD doing the service from other local design firms is the efforts we put in complimenting design tasks with a thorough research effort whether the latter goes into up-to-date design theories, building materials or new construction technologies.It is by contradiction to policies of most of the practicing consultancy firms in the region, BEAD approaches the services of design and architecture as a sacred profession rather than a commercial business.We currently operate out of our Abu Dhabi base, a decent environment of 500 sqm modern offices and employ 35 high caliber professionals.Responsobilities:1. Liaise and interact with the Municipality, and other various projects related authorities ADM, DMT, WRM, ADCD, ADDC/ TAQA, EAD, UPC, Estidama, DOT, Zonescorp, Master Developers, etc.2. Prepare, submit and maintain necessary records, documentation and follow - up on all legal documentation as required by various appropriate Authorities and developers.3. Review the design drawings, ensure compliance with authorities&rsquo; requirements for Submission, application and renewal of various NOCs, Approvals, and Building permit.4. Remain updated regarding the amendments in all the concerned bodies policies and regulations, and providing necessary support, assistance and awareness to all concerned, from time to time.5. Attend Authorities workshops for new regulation and new systems of application to building permit.6. Follow up project deliverables and progress of design work with Design team.7. Guide the team of Architects for Authorities design regulation, codes of different department and applied on design.8. Lead the design work as required ensuring project objectives are met, design instructions are implemented and delivery is achieved within the set time.9. Follow up and assist the Supervision team for all submissions during the Construction Phase up to issuance of the Building Completion Certificate.10. Coordinate and develop responses to review comments and find solution to acquire approvals from different authorities &amp; developers.11. Assist in improving and consolidating the company's relations with various authorities related to project.12. Assure the correctness, accuracy and complete multi-disciplinary coordination of the design documentation prepared by the assigned team.13. Coordinate with Third Party Firms &amp; Companies like (Soil Investigation Specialist, Traffic consultant, ADCD consultant, etc. who are assigned by BEAD to develop, review the drawings, meet the regulation and get the approval.14. Attend various meetings with Authorities Engineers, developers, Owners &amp; contractors for drawings discussion and submission of different stage.15. Assist in the preparation of concept design, building programs &amp; costing for new project.16. Assist the process of the Engineers License Card.17. Assist the process of BEAD&rsquo;s Classification Certificate, ISO, ICV, Civil Defense Certificate, and other authorities&rsquo; certificates.Knowledge, Skills &amp; Abilities:<ul><li>Very Good understanding of all requirements of Building Design, Execution of civil works, construction activities and installations.</li><li>Good understanding of the roles and responsibilities of the Consultant&rsquo;s Role, as well as the general industry requirements and procedures.</li><li>Demonstrate creativity, dedication, and mature professional judgment in anticipating and solving unprecedented problems.</li><li>Good experience in project planning, management, scheduling and sequencing of Permitting activities.</li></ul>Qualification &amp; Experience:<ul><li>Bachelors' degree in Arch. or Civil Engineering or any relevant engineering discipline.</li><li>Minimum 5 years&rsquo; experience in the role of AOR, liaising and dealing with the approval process for all types of projects with relevant statutory authorities / stakeholders in the UAE and specifically in Abu Dhabi Emirate.</li><li>Have crystal clear understanding of Authority processes, procedures and policies and ensure that these are adhered to during the design submission and review process</li><li>Multi bilingual; fluent in English language, reading and writing, is a must.</li><li>Very good knowledge of contractual clauses and applications in construction as well as FIDIC contracts.</li><li>Very good knowledge of technical correspondence, writing and computer applications related to the industry.</li><li>Having a PMP Certificate is an advantage.</li><li>Well versed with IT and related design software as well as web-based applications.</li></ul>Job Type: Full-timePay: AED4,000.00 - AED5,000.00 per monthExperience:<ul><li>Authority Liason Architect: 5 years (Required)</li></ul>License/Certification:<ul><li>Engineers Licence from Abu Dhabi Municipality (Required)</li></ul>Work Location: In person

Authority Liason Architect

Join BEAD Architects & Engineers and explore 8   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.