Qureos Mentor

Carlisle Construction Materials

<div><h1 class="jobSectionHeader"><b>Job Summary</b></h1>
<p>
Maintain and repair mechanical/electrical/boiler systems throughout the facility; execute capital projects (installation, dismantling of equipment) and other various high-leveled maintenance tasks throughout the facility with the ability to work independently and efficiently to ensure timely production processes.</p>
<div>
Expected hours of work 40 hours a week with a varied shift schedule 8-10 hours shifts with occasional overtime and weekend hours. No travel required.</div>
<div>
</div><p></p><h1 class="jobSectionHeader"><b>Duties and Responsibilities:</b></h1>
<ul><li><i>Reassemble machines after the completion of repair or maintenance
</i></li><li><i>Start machines and observe mechanical operation to determine efficiency and to detect
</i></li><li><i>Inspect or test damaged machine parts and mark defective areas or advise supervisors of
</i></li><li><i>Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment according to specific procedures.</i></li>
<li><i>Install, replace, or change machine parts and attachments according to production
</i></li><li><i>Dismantle machines and remove parts for repair using hand tools, chain falls, jacks, cranes, or
</i></li><li><i>Record production, repair, and machine maintenance
</i></li><li><i>Read work orders and specifications to determine machines and equipment requiring repair or
</i></li><li><i>Set up and operate machines and adjust controls to regulate
</i></li><li><i>Transport machine parts, tools, equipment, and other material between work areas and storage, using cranes, hoists, or dollies.</i></li>
<li><i>Collect and discard worn machine parts and other refuse in order to maintain machinery and work
</i></li><li><i>Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment.</i></li>
<li><i>Adjust, install, fabricate, and make modifications of equipment to maintain or improve safety and quality of operational conditions or equipment efficiency.</i></li>
<li><i>Comply and participate regulatory, Carlisle, And departmental policies, procedures, and standards (PSM, safety protocols, COS)</i></li>
<li><i>Troubleshoot control systems, servo drives, motors, HMI's and
</i></li><li><i>Calibrate controls
</i></li><li><i>Maintain and enhance electrical and PLC
</i></li><li><i>Provide training to Maintenance technicians I &amp; II as
</i></li><li><i>Articulate to vendors/engineer's machine issue to resolve technical
</i></li><li><i>Handle and audit preventative maintenance
</i></li><li><i>Other duties as
</i></li></ul><p></p><h1 class="jobSectionHeader"><b>Required Knowledge/Skills/Abilities:</b></h1>
<p>
</p><ul><li><i>Knowledge of measuring gauges such as tape
</i></li><li><i>Knowledge of various hand and power
</i></li><li><i>Prior experience operating a
</i></li><li><i>Working knowledge of electrical, pneumatic, and hydraulic
</i></li><li><i>Ability to comprehend complex technical topics and specialized
</i></li><li><i>Effective communication and problem-solving
</i></li><li><i>Understanding of basic math, reading, and writing
</i></li><li><i>Ability to work under pressure to complete assigned tasks under stressful
</i></li><li><i>Have boiler operator certification or ability to obtain boiler
</i></li><li><i>Working knowledge of electrical codes including NEMA, (NFPA 70E, Arc Flash)</i></li>
<li><i>Industrial electrical AC/DC troubleshooting skills, including ability to utilize electrical instrumentation (megohmmeter).</i></li>
<li><i>Complete knowledge of all plant equipment (level III).</i></li>
<li><i>Ability to use hand&amp; portable tools, gas and arc welder, forklift, pickup truck, testing equipment, tape measure, computer (shop floor and ERP).</i></li>
</ul><h1 class="jobSectionHeader"><b>Education and Experience:</b></h1>
<ul><li><i>Required:</i>
<ul><li><i>Education &ndash; High School diploma or GED required or technical
</i></li><li><i>Three to five (3-5) years related maintenance
</i></li><li><i>Previous experience in the following maintenance areas preferred: electrical, plumbing, carpentry, welding, and boiler.</i></li>
<li><i>Mechanical background with rotating Hydraulic and pneumatic. Electrical/mechanical troubleshooting.</i></li>
<li><i>PLC
</i></li></ul></li></ul><h1 class="jobSectionHeader"><b>Working Conditions:</b></h1>
<ul><li><i>Fast paced manufacturing environment where workers are exposed to both ambient/outside temperatures and dust; working with mechanical parts and pinch points; exposure to increased noise levels.</i></li>
<li><i>Exposure to hazardous mechanical, electrical and chemical substances/equipment.</i></li>
<li><i>Confined
</i></li></ul><p></p><h1 class="jobSectionHeader"><b>Physical Requirements:</b></h1><div><b><br>
</b></div><p></p><div><div><div><div><div><b>OCCASIONALLY</b></div></div><div><br>
<div><b>
FREQUENTLY</b></div></div><div><br>
<div><b>
CONTINUOUSLY</b></div></div></div><div><br>
<div>
<p>(0-30%)</p></div><div><br>
<p>
(31-60%)</p></div><div><br>
<div>
(61-100%)</div></div></div><div><br>
<div>
<p><b>LIFTING OR CARRYING</b></p></div></div><div><br>
<div>
<p>. 1-10 LBS</p></div><div><p><br>
</p></div><div><div><b>X</b></div></div><div><p><br>
</p></div></div><br>
<div><div><p>. 11-20 LBS</p></div><div><p><br>
</p></div><div><div><b>X</b></div></div><div><p><br>
</p></div></div><br>
<div><div><p>. 21-40 LBS</p></div><div><br>
<div><b>
X</b></div></div><div><p><br>
</p></div></div><br>
<p></p><div><div><p>. 41-50 LBS</p></div><div><br>
<div><b>
X</b></div></div><div><p><br>
</p></div></div><br>
<p></p><div><div><p>. 51 OR MORE LBS</p></div><div><br>
<div><b>
X</b></div></div><div><p><br>
</p></div></div><br>
<p></p><div><div><p><b>PUSHING OR PULLING:</b></p></div></div><div><br>
<div>
<p>. 1-40 LBS</p></div><div><br>
<div><b>
X</b></div></div><div><p><br>
</p></div></div><br>
<p></p><div><div><p>. 41-50 LBS</p></div><div><p><br>
</p></div><div><div><b>X</b></div></div><div><p><br>
</p></div></div><br>
<div><div><p>. 51 OR MORE LBS</p></div><div><br>
<div><b>
X</b></div></div><div><p><br>
</p></div></div><br>
<p></p><div><div><p>BENDING OR STOOPING</p></div><div><p><br>
</p></div><div><div><b>X</b></div></div><div><p><br>
</p></div></div><br>
<div><div><p>REACHING ABOVE SHOULDER LEVEL</p></div><div><p><br>
</p></div><div><div><b>X</b></div></div><div><p><br>
</p></div></div><br>
<div><div><p>DRIVING AUTOMATIC EQUIP. VEHICLES</p></div><div><br>
<div><b>
X</b></div></div><div><p><br>
</p></div></div><br>
</div></div><p></p><div><div><div><div><div><b>OCCASIONALLY</b></div></div><div><br>
<div><b>
FREQUENTLY</b></div></div><div><br>
<div><b>
CONTINUOUSLY</b></div></div></div><div><br>
<div>
<div>(0-30%)</div></div><div><br>
<p>
(31-60%)</p></div><div><br>
<div>
(61-100%)</div></div></div><div><br>
<div>
<p>OPERATE MACHINERY OR POWER TOOLS</p></div><div><p><br>
</p></div><p></p><div><div><b>X</b></div></div></div><div><br>
<div>
<p>CLIMBING (LADDERS, STAIRS, ETC.)</p></div><div><p><br>
</p></div><div><div><b>X</b></div></div><div><p><br>
</p></div></div><br>
<div><div><p>WALKING</p></div><div><p><br>
</p></div><p></p><div><div><b>X</b></div></div></div><div><br>
<div>
<p>STANDING</p></div><div><p><br>
</p></div><p></p><div><div><b>X</b></div></div></div><div><br>
<div>
<p>SITTING</p></div><div><br>
<div><b>
X</b></div></div><div><p><br>
</p></div></div><br>
<p></p><div><div><p>WORKING IN EXTREME TEMPERATURES</p></div><div><p><br>
</p></div><p></p><div><div><b>X</b></div></div></div><div><br>
<div>
<p>REPETATIVE MOTION INCLUDING BUT NOT LIMITED TO: WRISTS, HANDS AND/OR FINGERS)</p></div><div><p><br>
</p></div><p></p><div><div><b>X</b></div></div></div><div><br>
<div>
<p>VISION</p></div><div><p><br>
</p></div><p></p><div><div><b>X</b></div></div></div><div><br>
<div>
<p>HEARING</p></div><div><p><br>
</p></div><p></p><div><div><b>X</b></div></div></div><div><br>
<div>
<p>DEXTERITY</p></div><div><p><br>
</p></div><p></p><div><div><b>X</b></div></div></div><div><br>
<div>
<p>HAND EYE COORDINATION</p></div><div><p><br>
</p></div><p></p><div><div><b>X</b></div>
</div>
</div><br>
</div></div><p></p><p><b>Personal Protective Equipment (PPE) Used:</b></p>
<ul>
<li>Eye and hearing protection is required at all times on the production
</li><li>Safety toe shoes (steel/composite).</li>
<li>Flame Resistant rated Maintenance uniform</li>
<li>Other PPE as defined by management within assigned</li>
</ul>
<p>This position offers a sign on bonus of $3000 paid in three installments:</p>
<p>
</p><p>$1000 at 90 days</p>
<p>
$1000 at 180 days</p>
<p>
$1000 at 270 days</p></div>

Maintenance Technician - Rotating 1st/2nd Shift

<div><p>Carlisle Companies is a leading manufacturer of building envelope products and solutions that make buildings more energy efficient, durable, and sustainable.</p>
<p>
</p><p>We deliver roofing, insulation, waterproofing, and architectural systems for commercial and residential projects using a focus on innovation and continuous improvement to solve today's challenges.</p>
<p>
</p><p>We're equally committed to our people, prioritizing safety, inclusion, career growth, development, tuition assistance, and excellent benefits.</p>
<p>
</p><p>With manufacturing, engineering, operations, and corporate functions across North America and globally, Carlisle offers stability, agility, and opportunity in a performance-driven culture. Do meaningful work and shape the future of building solutions; apply today and come grow with us.</p>
<p>
</p><p><b>Duties and Responsibilities:</b></p>
<ul>
<li>Operator uses equipment to assist with manufacturing, batching, filling, packaging, and other steps along a production line</li>
<li>Utilizes and ensures safe use of operating equipment as trained, such as; Forklifts, pumps, mixers, valves, as well as maintain high levels of housekeeping on the go</li>
<li>Has the ability to read, write, perform basic mathematical equations, understand, and follow instructions detailed on Work Orders (i.e. Batch Tickets)</li>
<li>Gathers and maintains high stocking levels of all required components in a promptly manner, to efficiently package mixed product as determined on Batch tickets</li>
<li>Records all required data on batch tickets, completes daily, weekly, monthly check list(s) and equipment logs as required</li>
<li>Understands KPI's and meets production targets given per task</li>
<li>Completes quality testing and records testing data as required</li>
<li>Disassembles, cleans and reassembles equipment as needed and trained to do so</li>
<li>Attends all training programs as required and sponsored by the company</li>
<li>Performs required tasks according to Standard Operating Procedures (SOP's)</li>
<li>Applies and follows all OSHA and Henry safety standards, policies and procedures that pertain to tasks performed</li>
<li>Maintain Cleanliness and possess organizational skills, keeps housekeeping at designated area as well as work site level</li>
<li>Other duties as assigned.</li>
</ul>
<p><b>Required Knowledge/Skills/Abilities:</b></p>
<ul>
<li>Self-starter and be able to work with little direct supervision</li>
<li>Previous experience in a production environment</li>
<li>Effective communication skills</li>
<li>Must have reliable transportation</li>
<li>Must be dependable and have a good attendance record</li>
<li>Previous experience safely operating a forklift</li>
<li>Flexible to work overtime, as needed</li>
</ul>
<p></p><p><b>Education and Experience:
</b></p><ul><li>High School Diploma or GED is Preferred</li>
<li>Must be at least 18 years of age or older.</li>
<li>Prior experience in a manufacturing setting preferred.</li>
</ul>
<p><b>Working Conditions:</b></p>
<p>
Fast paced manufacturing environment where workers are exposed to both ambient/outside temperatures and dust; working with mechanical parts and pinch points; exposure to increased noise levels.</p>
<ul>
<li>Hours worked: 8-10 hours/shift, varies on shift schedule and business volume.</li>
<li>Flexible to the possibility of overtime and weekend hours when required.</li>
<li>Heavy, stationary machinery on manufacturing floor.</li>
<li>Radio, Calculator, Measuring Devices</li>
<li>Hand tools</li>
<li>Computer (Shop Floor and ERP)</li>
</ul>
<p>BENEFITS AND PERKS</p>
<p>
</p><p>Our employees' well-being is crucial to Carlisle's success. Despite the nationwide increase in healthcare costs, Carlisle has maintained the same employee premiums for four consecutive years by absorbing the rising medical insurance expenses. Furthermore, you have the flexibility to tailor a benefits program that perfectly suits your needs.</p>
<p>
</p><p>Benefits offered:</p>
<p>
</p><p>Medical, Dental, and Vision insurance- DAY 1</p>
<p>
Life and Accidental Death &amp; Dismemberment Insurance</p>
<p>
Leave &amp; Disability Income Protection (FMLA, LOA, PPL, STD, LTD)</p>
<p>
Employee Assistance Program (EAP)</p>
<p>
Health Advocate &ndash; health care concierge service</p>
<p>
PTO &ndash; sick days, 11 holidays, vacation</p>
<p>
401K Retirement Savings Plan with company match</p>
<p>
Employee Stock Purchase Plan</p>
<p>
Flexible Spending accounts (commuter benefits, flexible spending accounts, health savings account)</p>
<p>
College Scholarships for Dependents</p>
<p>
Tuition Reimbursement</p></div>

Machine Operator 1

<div><p><b>Job Summary</b>
</p><div>This position will independently set-up, operate and troubleshoot one machine/equipment (Shear, PNL, Turret, Brake Press, Robotic Cell, Cut-to-Length, Roll Forming/Seaming, Press Lock).
</div><p></p><p><b>Duties and Responsibilities:</b>
</p><ul><li>Set-up, thread the material through, and operate independently one machine (Shear, PNL, Turret, Brake Press, Robotic Cell, Cut-to-Length, Roll Forming/Seaming, Press Lock, Welder/Paint Booth).
</li></ul><ul><li>Follow daily manufacturing work orders giving special attention to various materials and add any specific notations needed.
</li></ul><ul><li>Assists with the operation of other machinery under close supervision.
</li></ul><ul><li>Assist with the packaging at the end of the line and as needed.
</li></ul><ul><li>Band and palletize metal coils and/or metal sheets, place tags/labels on finished product.
</li></ul><ul><li>Perform quality checks to verify proper lengths, widths, and weights are adhered to using the proper tools.
</li></ul><ul><li>Achieving production goals while complying with all safety requirements.
</li></ul><ul><li>Mounting and originating slitter knives, spaces, and guide discs for various specified coil widths; this includes adjusting clearances of knives and vertical/horizontal gapping (roll-former only).
</li></ul><ul><li>Adjust machinery by observation and using monitoring equipment feedback and perform quality control methods.
</li></ul><ul><li>Responsible for following all safety procedures including lockout/tagout and daily equipment inspection.
</li></ul><ul><li>Responsible for keeping work area in an orderly condition.
</li></ul><ul><li>Will be required to perform other duties as requested, directed, or assigned
</li></ul><p></p><p><b>Required </b><b>Knowledge</b><b>/</b><b>Skills/Abilities:</b>
</p><ul><li>Must be 18 years or older.
</li></ul><ul><li>Highly motivated with a good, sound work ethic.
</li></ul><ul><li>Able to safely operate a sit-down forklift &ndash; training will be provided if necessary; all production employees must complete CCM's forklift certification program regardless of previous experience.
</li></ul><ul><li>Must demonstrate safe working practices and possess great attention to detail.
</li></ul><ul><li>Ability to follow CCM's policies, procedures, and processes.
</li></ul><ul><li>Good communication, organization, and time management skills.
</li></ul><ul><li>Basic computer, mathematics, and problem-solving skills; ability to use a calculator.
</li></ul><ul><li>Ability to use measuring devices (gauges, tapes, rulers).
</li></ul><ul><li>Team player that is able to follow instructions from both management and peers.
</li></ul><ul><li>Ability to learn and operate new equipment.
</li></ul><div></div><p><b>Education and Experience:
</b></p><ul><li>Required:
</li></ul><ul><li>High School diploma or equivalent is required.
</li></ul><ul><li>Minimum of six (6) months of experience.
</li></ul><div></div><div><b>Working Conditions:</b>
</div><ul><li>Fast paced manufacturing environment where workers are exposed to both ambient/outside temperatures and dust; working with mechanical parts and pinch points; exposure to increased noise levels.
</li></ul><ul><li>Hours Worked: 40 hours per week; Shift: 1st
</li></ul><ul><li>Days/Week: Monday &ndash; Friday; 6AM - 2PM
</li></ul><ul><li>Flexible to the possibility of overtime and weekend hours when required.
</li></ul><p><b>Physical Requirements:<br>
</b></p><div></div><div><div><div><div><div><b>OCCASIONALLY</b><br>
</div></div><div><div><b>FREQUENTLY</b><br>
</div></div><div><div><b>CONTINUOUSLY</b><br>
</div></div></div><br>
<div><div><div>(0-30%)<br>
</div></div><div><div>(31-60%)<br>
</div></div><div><div>(61-100%)<br>
</div></div></div><br>
<div><div><div><b>LIFTING OR CARRYING</b><br>
</div></div></div><br>
<div><div>1-10 LBS<br>
<ul><li>
 </li></ul></div><div></div><div><div><b>X</b></div></div><div><br>
<div>
</div></div></div><br>
<div><div>11-20 LBS<br>
<ul><li>
 </li></ul></div><div></div><div><div><b>X</b></div></div><div><br>
<div>
</div></div></div><br>
<div><div>21-40 LBS<br>
<ul><li>
</li></ul></div><div></div><div><div><b>X</b></div></div><div><br>
<div>
</div></div></div><br>
<div><div>41-50 LBS<br>
<ul><li>
</li></ul></div><div></div><div><div><b>X</b></div></div><div><br>
<div>
</div></div></div><br>
<div><div>51 OR MORE LBS<br>
<ul><li>
</li></ul></div><div></div><div><div><b>X</b></div></div><div><div><br>
</div></div></div><br>
<div><div><div><b>PUSHING OR PULLING:</b><br>
</div></div></div><br>
<div><div>1-40 LBS<br>
<ul><li>
 </li></ul></div><div></div><div><div><b>X</b></div></div><div><br>
<div>
</div></div></div><br>
<div><div>41-50 LBS<br>
<ul><li>
 </li></ul></div><div></div><div><div><b>X</b></div></div><div><br>
<div>
</div></div></div><br>
<div><div>51 OR MORE LBS<br>
<ul><li>
</li></ul></div><div></div><div><div><b>X</b></div></div><div><div><br>
</div></div></div><br>
<div><div><div>BENDING OR STOOPING<br>
</div></div><div></div><div><div><b>X</b></div></div><div><div><br>
</div></div></div><br>
<div><div><div>REACHING ABOVE SHOULDER LEVEL<br>
</div></div><div></div><div><div><b>X</b></div></div><div><div><br>
</div></div></div><br>
<div><div><div>DRIVING AUTOMATIC EQUIP. VEHICLES</div></div><div><br>
<div>
 </div></div><div></div><div><div><b>X</b><br>
</div></div></div><br>
<div><div><div>OPERATE MACHINERY OR POWER TOOLS</div></div><div><br>
<div>
 </div></div><div></div><div><div><b>X</b><br>
</div></div></div><br>
<div><div><div>CLIMBING (LADDERS, STAIRS, ETC.)<br>
 </div></div><div></div><div><div><b>X</b></div></div><div><div><br>
</div></div></div><br>
<div><div><div>WALKING<br>
</div></div><div></div><div><div><b>X</b><br>
</div></div></div><br>
<div><div><div>STANDING<br>
</div></div><div></div><div><div><b>X</b><br>
</div></div></div><br>
<div><div><div>SITTING<br>
</div></div><div><div><b>X</b></div></div><div><div><br>
</div></div></div><br>
<div></div><div><div><div>WORKING IN EXTREME TEMPERATURES</div></div><div><br>
<div>
 </div></div><div></div><div><div><b>X</b><br>
</div></div></div><br>
<div><div><div>REPETATIVE MOTION INCLUDING BUT NOT LIMITED TO: WRISTS, HANDS AND/OR FINGERS)</div></div><div><div><br>
</div></div><div></div><div><div><b>X</b><br>
</div></div></div><br>
<div><div><div>VISION</div></div><div><div><br>
</div></div><div></div><div><div><b>X</b><br>
</div></div></div><br>
<div><div><div>HEARING</div></div><div><div><br>
</div></div><div></div><div><div><b>X</b><br>
</div></div></div><br>
<div><div><div>DEXTERITY</div></div><div><div><br>
</div></div><div></div><div><div><b>X</b><br>
</div></div></div><br>
<div><div><div>HAND EYE COORDINATION<br>
</div></div><div></div><div><div><b>X</b>
</div></div></div><br>
</div></div><p></p><p><b>Personal Protective Equipment (PPE) Used:
</b></p><ul><li>Personal Protective Equipment is regularly required for this position which includes steel or composite toe boots, safety glasses, cut-resistant gloves and arm guards, and hearing protection.
</li></ul><div>At Carlisle Companies, Inc., we're dedicated to making your experience exceptional from the very start of your journey with us. We're excited to share our commitment to transparency, including our Pay Transparency Notice, with all applicants for this position. As a company that values growth and development, we offer numerous career opportunities across various departments, ensuring you have the support and resources to advance your career.
</div><div>Please take a moment to review the details below. If you have any questions, need more information, or want to explore potential career paths within Carlisle, we encourage you to bring them up during your discussions with our Talent Acquisition and Human Resources teams.<br>
</div><div></div><div><br>
As a Operator I, you will be entitled to the following:
</div><ul><li>An Hourly Rate of $24.53</li>
</ul><ul><li>Benefits Include:
</li></ul><ul><li>Medical/Dental/Vision Coverage Beginning Day 1 of Employment
</li></ul><ul><li>Health Savings Account
</li></ul><ul><li>401k Contribution with Company Match
</li></ul><ul><li>11 Company Paid Holidays Per Calendar Year
</li></ul><ul><li>Vacation Days: The total number of days granted depends on your years of professional experience. The first year of employment is prorated based on the month of hire.
</li></ul><ul><li>Confirm your allotment eligibility with Talent Acquisition or HR.
</li></ul><ul><li>Sick Days: All Carlisle Employees are granted at least 5 sick days per calendar year.
</li></ul><ul><li>Confirm with Talent Acquisition or HR the allotment or accrual based on your locality.
</li></ul><ul><li>Two weeks Paid Parental Leave at 100% base compensation, upon approval.
</li></ul><ul><li>Short-Term &amp; Long-Term Disability Benefits, 100% Employer Funded
</li></ul><ul><li>Tuition Reimbursement is available after 6 months of full-time employment, covering up to 100% of tuition which includes 18 credit hours, the costs, and eligible associated fees per calendar year.
</li></ul><ul><li>For a full view of our entire benefits package, please visit www.carlislebenefits.com</li></ul></div><p></p>

Operator I

Join Carlisle Construction Materials and explore 3   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

Carlisle Construction Materials

About Company

Maintenance Technician - Rotating 1st/2nd Shift

Machine Operator 1

Operator I