Qureos Mentor

CoorsTek

<div>It's exciting to work for a company that makes the world measurably better.
We're committed to bringing safety, quality, and customer focus to the business of advanced ceramics manufacturing.
Job Title
Lab Materials Analyst II
Executes quantitative elemental analysis of ceramics and inorganic materials using ICP-OES and ICP-MS, with complex inorganic digestion chemistry. Develops and improves digestion protocols and analytical methods to ensure high data accuracy, robustness, and traceability. Produces technical reports for internal stakeholders and leads continuous improvement using Management of Change principles.
Roles &amp; Responsibilities
Core Analytical Scope<ul><li>
Performs quantitative elemental analysis using ICP-OES and ICP-MS, with a primary focus on:<ul><li>
Developing, optimizing, and executing inorganic digestion and analysis procedures for oxide and non-oxide ceramic materials.</li><li>
Focused on developing and refining analysis methods to ensure flexibility and accuracy in response to the needs of continuously evolving product lines.</li></ul></li><li>
Expand laboratory capabilities and techniques.</li><li>
Demonstrates or develops competence in TGA-IR, FTIR, and Raman spectroscopy to support complementary material characterization.</li><li>
Interprets digestion behavior, matrix effects, chemical stability, and interference patterns specific to advanced ceramics.</li></ul>
Technical Leadership &amp; Data Ownership<ul><li>
Works under general supervision and provides technical leadership in the chemistry testing section.</li><li>
Owns digestion method fidelity and elemental data accuracy; performs peer review and spot checks of analyst and technician work.</li><li>
Applies statistical tools (Gage R&amp;R, control charts, recovery studies, spike/replicate analysis) to validate digestion and ICP method performance.</li></ul>
Operations &amp; Method Development<ul><li>
Prepares samples, executes digestions, performs analyses, compiles results, and generates accurate, timely technical reports.</li><li>
Leads development and refinement of digestion chemistry for both routine and exploratory analyses&mdash;including high-temperature fusions, mixed-acid digestions, and closed-vessel microwave digestion.</li><li>
Develops and tunes multi-element ICP-OES/MS methods, calibration strategies, and QA/QC protocols.</li><li>
Conducts literature reviews to evaluate novel digestion techniques, difficult-to-dissolve phases, or emerging industry standards.</li></ul>
Collaboration, Mentorship &amp; Training<ul><li>
Provides targeted training to technicians and Analyst I staff on safe inorganic digestion practices, sample prep strategy, and instrument operation.</li><li>
Supports onboarding by establishing clear expectations for digestion accuracy, contamination control, and proper reagent handling.</li><li>
Interacts with engineering, R&amp;D, and production to align on analytical approach and clarify complex material behaviors.</li></ul>
Equipment Management &amp; Troubleshooting<ul><li>
Performs routine maintenance and first-line troubleshooting on ICP systems, microwave digestors, hot blocks, balances, and fume hood setups.</li><li>
Identifies and documents equipment performance issues and escalates as appropriate.</li></ul>
Safety &amp; Continuous Improvement<ul><li>
Champions chemical safety, especially in handling strong acids (HF, HNO3, HCl, H2SO4), oxidizers, and high-temperature digestion processes.</li><li>
Uses Management of Change methodology to improve digestion workflows, reduce rework, and increase analytical reliability.</li></ul><div></div>
Job Requirements
Education
Bachelor&rsquo;s Degree in Chemistry highly preferred. Bachelor&rsquo;s Degree in Materials Science, physics, raw sciences, or a related field is applicable with appropriate laboratory experience. Coursework in analytical chemistry, inorganic chemistry, and instrumental analysis is required.
Experience<ul><li>
 8+ years of laboratory experience required.<ul><li>
Direct experience with ICP-OES and/or ICP-MS.</li><li>
4+ years of development and validation experience.</li><li>
Spectroscopy and/or spectrometry experience.</li></ul></li><li>
Strongly preferred:<ul><li>
4+ years inorganic experience</li><li>
Hands-on experience developing and executing inorganic digestions for complex ceramic or mineral systems&mdash;including mixed-acid digestions, microwave digestion, fusions, or peroxide-assisted digestions.</li><li>
Experience with FTIR or Raman spectroscopy is highly desirable.</li><li>
Wet chemistry experience</li><li>
Complex spectroscopy analysis and processing experience.</li></ul></li></ul><div></div>
Functional / Technical Knowledge, Skills &amp; Abilities<ul><li>
Demonstrated mastery of inorganic digestion workflows&mdash;including contamination control, reagent selection, digestion chemistry, and recovery verification.</li><li>
Skilled in operating ICP-OES/MS systems and interpreting multi-element data sets.</li><li>
Strong command of statistical analysis and method validation principles.</li><li>
Able to mentor junior staff in complex digestion and prep techniques.</li><li>
Strong communication skills for reporting, cross-functional collaboration, and technical guidance.</li><li>
Knowledge of ceramic and inorganic material systems is strongly preferred.</li><li>
Organized, detail-focused, and self-driven, with strong ownership of method and data integrity.</li></ul>
Target Hiring Range
Annual Salary: USD 90,196.00 - USD 119,059.00
Actual compensation is commensurate with experience, skills and education. CoorsTek strives to give all qualified applicants equal opportunity and to make selection decisions on job related factors. Do not provide any information on the application which will indicate your race, color, religion, national origin, sex, age, disability, sexual orientation, gender identity, pregnancy, genetic information, veteran status, or any other status protected by law or regulation.
If you like working for a company that makes a real difference in the world, you'll enjoy your career with us!</div>

Lab Materials Analyst II

<div>It's exciting to work for a company that makes the world measurably better.
We're committed to bringing safety, quality, and customer focus to the business of advanced ceramics manufacturing.
Job Title
Lab Materials Analyst I
Executes routine mechanical, thermal, and electrical property testing to characterize advanced ceramics and related materials. Prepares samples, performs analyses per established methods, interprets results, and generates clear, accurate reports for internal stakeholders.
Roles &amp; Responsibilities
Core Testing Scope 
Conducts testing within the Physical Properties Lab with emphasis on:<ul><li>
Mechanical properties: flexural strength (3-pt, 4-pt), fracture toughness (CNB), elastic modulus, Density (Archimedes and Pycnometry), PSD, and specific gravity.</li><li>
Thermal properties: thermogravimetric analysis (TGA), thermal conductivity/diffusivity, dilatometry, differential scanning calorimetry.</li><li>
Electrical properties: dielectric breakdown, dielectric loss and constant, volume resistivity.</li></ul>
Analytical Execution &amp; Data Quality<ul><li>
Prepares samples and executes tests using established methods, specifications, and quality requirements.</li><li>
Interprets data using standard calculations, baseline statistical tools, and documented acceptance criteria.</li><li>
Produces timely, accurate technical reports for engineering, R&amp;D, quality, and production stakeholders.</li><li>
Escalates method-accuracy concerns, equipment anomalies, or statistically abnormal results to senior analysts or supervisors.</li><li>
Maintains data integrity by following documented workflows, calibration requirements, and sample-traceability procedures.</li></ul>
Operational Excellence<ul><li>
Performs routine equipment cleaning, basic troubleshooting, and preventative maintenance for instruments within scope.</li><li>
Identifies and communicates equipment or method issues requiring SME or supervisor support.</li><li>
Partners with technicians on sample preparation and instrument setup; provides clear expectations and feedback consistent with role-level behaviors.</li><li>
Supports onboarding and skills development of laboratory technicians by providing hands-on training in routine test execution, proper sample preparation, safe equipment use, and data-collection fundamentals.</li><li>
Contributes to continuous improvement by identifying process inefficiencies, recurring failure points, or safety risks.</li></ul>
Safety &amp; Compliance<ul><li>
Works in accordance with established safety procedures, PPE requirements, and chemical-handling protocols.</li><li>
Recognizes potential safety issues and proposes practical, high-value corrective actions.</li></ul><div></div>
Job Requirements
Education
Bachelor&rsquo;s Degree in Materials Science, Mechanical Engineering, Metallurgy, Physics, Chemistry, or related technical field.
Experience<ul><li>
Required: College-level laboratory coursework with hands-on materials testing experience; at least one internship or equivalent applied lab experience.</li><li>
Preferred: 1&ndash;2 years experience in a materials testing or physical properties lab. Experience with mechanical, thermal, or dielectric testing is strongly preferred.</li></ul><div></div>
Functional / Technical Knowledge, Skills &amp; Abilities<ul><li>
Ability to operate analytical instruments and associated software for mechanical, thermal, and electrical tests.</li><li>
Competency with laboratory information systems, statistical tools, and manufacturer-specific instrument interfaces.</li><li>
Strong technical communication skills; able to summarize findings clearly for cross-functional teams.</li><li>
Organized and detail-oriented, with demonstrated ability to follow structured workflows.</li><li>
Works effectively within a team environment and collaborates with technicians, analysts, and engineers.</li><li>
Demonstrates ownership of data quality appropriate to an Analyst I role, consistent with career-pathing expectations.</li></ul><div></div>
Physical Requirements<ul><li>
Wears required PPE in designated lab areas.</li><li>
May handle hazardous chemicals including acids, bases, solvents, and high-temperature materials.</li><li>
May operate furnaces, kilns, or other high-temperature preparation equipment.</li></ul>
Target Hiring Range
Annual Salary: USD 73,342.00 - USD 95,000.00
Actual compensation is commensurate with experience, skills and education. CoorsTek strives to give all qualified applicants equal opportunity and to make selection decisions on job related factors. Do not provide any information on the application which will indicate your race, color, religion, national origin, sex, age, disability, sexual orientation, gender identity, pregnancy, genetic information, veteran status, or any other status protected by law or regulation.
If you like working for a company that makes a real difference in the world, you'll enjoy your career with us!</div>

Lab Materials Analyst I

<div>It's exciting to work for a company that makes the world measurably better.
We're committed to bringing safety, quality, and customer focus to the business of advanced ceramics manufacturing.
Job Title
Sr. Automation Controls Engineer
This position will execute against the function&rsquo;s strategy, and is responsible for understanding and defining all aspects of automation and controls systems within the company. This may include but is not limited to: evaluating process improvements, performing cost benefit analysis, writing equipment specifications, equipment supplier evaluations, writing project proposals, equipment installation and commissioning, materials of construction/services/ programming, controls, and safety concerns. Accountable for producing yield and productivity improvements, executing technology transfers, and increasing the efficiency of existing capital equipment in their SME area on a global scale.<ul><li>Operate as an engineering subject matter expert in the areas of automation and controls.</li><li>Accountable for providing engineering support and delivery of solutions in their area of expertise.</li><li>Responsible for problem solving activities for complex issues that involve controls/automation systems and associated equipment.</li><li>Key interface with manufacturers and integrators that supply controls/automation solutions to the company.</li><li>Utilize experience and a strong understanding of ceramic, manufacturing techniques, associated equipment, and design/function to improve current or develop new manufacturing processes to meet customer requirements.</li><li>Execute capital project installations and technology transfers to meet production requirements.</li><li>Manage projects including training and guiding plant engineering and manufacturing team members.</li><li>Improve efficiencies by collaborating with manufacturing leadership, coordinating with maintenance/repair services, and cross functional engineering teams, to establish effective processes and procedures delivering results.</li><li>Responsible for staying connected to the trends in manufacturing automation and controls through industry publications and conferences; transfer knowledge of technology trends and methodologies to our operations across the company.</li><li>Perform detailed analysis for executive review and be able to effectively communicate up and down.</li></ul>
Job Requirements:
<div>Required Education: 
<ul><li>Bachelor&rsquo;s degree in Electrical/Controls or Mechanical Engineering or related engineering discipline.</li></ul></div><div> 
Experience: 
<ul><li>A minimum of 5 years of Manufacturing/Process Engineering experience (preferably automation engineering) required.</li><li>Implement/apply LEAN, Six Sigma or other TQM process improvement methodologies in a manufacturing environment.</li><li>Experience in an automated engineering environment.</li><li>Experience commissioning equipment for large and small capital projects.</li><li>Technically proficient in programming A-B PLCs and HMI screens (Control Logix, PLC 5, Factory Talk, Wonderware).</li><li>Extensive knowledge in electrical schematics, P&amp;IDs, experience with Solid Works, and Auto Cad.</li><li>Working knowledge of NEC, IEEE, ISA, IEC, and NEMA codes.</li></ul></div><div>
 Must be able to work with a diverse variety of people from different cultures and backgrounds. 
<ul><li>Software knowledge: MS Outlook, Word, Excel, PowerPoint, Access, AutoCAD, Solid Works and various machine and PLC / HMI program languages.</li></ul></div>
#LI-MR1 
Target Hiring Range
Annual Salary: USD 106,071.00 - USD 140,013.00
Actual compensation is commensurate with experience, skills and education. CoorsTek strives to give all qualified applicants equal opportunity and to make selection decisions on job related factors. Do not provide any information on the application which will indicate your race, color, religion, national origin, sex, age, disability, sexual orientation, gender identity, pregnancy, genetic information, veteran status, or any other status protected by law or regulation.
If you like working for a company that makes a real difference in the world, you'll enjoy your career with us!</div>

Sr. Automation Controls Engineer

Join CoorsTek and explore 3   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

CoorsTek

ABOUT_COMPANY

Lab Materials Analyst II

Lab Materials Analyst I

Sr. Automation Controls Engineer