Qureos Mentor

CrossSafety Solutions Inc.

<div>About Us 
At CrossSafety, we specialize in providing comprehensive Health &amp; Safety consulting, engineering, and recruitment services across North America. With over 200 professionals supporting clients in industries ranging from manufacturing to logistics, we are committed to integrity, excellence, and innovation in everything we do.

We are currently seeking a highly skilled Mechanical Project Engineer to join our team in San Antonio, TX. This is an onsite role, with standard working hours Monday through Friday and occasional overtime as needed.

About the Role 
In this position, you will facilitate mechanical building system design, startups, and commissioning activities for industrial projects. You will oversee equipment and pipe installations, coordinate with contractors, and ensure projects meet schedule, cost, and quality expectations. Your expertise in mechanical engineering and industrial building construction will help deliver successful project outcomes.

 Work Schedule: Monday &ndash; Friday (Overtime up to 25%) 
 Travel: 5% domestic travel, primarily to Georgetown, KY 
 Overtime: Up to 25%

What You&rsquo;ll Be Doing 
&#10004; Facilitate mechanical system design, startups, and commissioning activities 
&#10004; Review product/equipment submittals, shop drawings, and contractor-generated RFIs 
&#10004; Ensure compliance with safety procedures, OSHA standards, and electrical/building codes (IBC, NEC, NESC, NFPA, ASME, AMCA, ARI, AWS, ASHRAE, FM) 
&#10004; Coordinate with contractors and vendors for factory testing, delivery, installation, and handover 
&#10004; Conduct inspections and quality verification of mechanical systems and installations 
&#10004; Manage weekend or plant shutdown work with contractors and plant teams 
&#10004; Prepare field engineering status reports and provide technical feedback to improve project standards 
&#10004; Effectively communicate technical matters in written and verbal formats 
&#10004; Multi-task, prioritize, and manage project commitments to meet deadlines and milestones

What You Bring 
&#9989; Bachelor&rsquo;s degree in Mechanical Engineering (or equivalent industrial construction experience) 
&#9989; 5&ndash;10 years of experience in industrial building construction or mechanical project engineering 
&#9989; Experience with HVAC, pipe installations, and large-scale industrial equipment installation 
&#9989; Familiarity with industrial building projects (office expansions, plant buildings) &mdash; automotive experience is a plus 
&#9989; Ability to coordinate with building trades and union contractors 
&#9989; Strong project management, problem-solving, and communication skills

Bonus Skills (Nice to Have) 
 Journeyman industrial mechanic experience (10&ndash;15 years) 
 Experience with foundations, steel structures, or hard building expansions 
 Prior work on hospital or large office building projects

Interview Process 
 First round: MS Teams interview 
 Second round: Onsite interview

 If you&rsquo;re an experienced mechanical engineer ready to lead large industrial projects, coordinate with cross-functional teams, and ensure high-quality execution, apply today!

Equal Opportunity Employer 
CrossSafety is committed to fostering an inclusive workplace. Accommodations for candidates with disabilities are available upon request. 
We appreciate all applicants' interest, but only those selected for an interview will be contacted.</div>

Mechanical Engineer– San Antonio, TX

<div>Manufacturing Engineer &ndash; Powertrain Casting &ndash; Jackson, TN (Onsite Required, M-F)

About Us 
At CrossSafety, we specialize in providing comprehensive Health &amp; Safety consulting, engineering, and recruitment services across North America. With over 200 professionals supporting clients in industries ranging from manufacturing to logistics, we are committed to integrity, excellence, and innovation in everything we do.

We are currently seeking a passionate and highly motivated Manufacturing Engineer &ndash; Powertrain Casting to join our team in Jackson, TN. This is an onsite role, and candidates must be available Monday through Friday.

About the Role 
In this position, you will play a key role in supporting powertrain casting projects, including equipment and die specifications, process parameter development, pre-production preparation, and quality confirmation trials. You will lead project teams, coordinate capital projects, and implement problem-solving countermeasures to ensure production goals are met.

 Work Location: Jackson, TN (Onsite required) 
 Travel: As needed to support project activities 
 Work Schedule: Monday &ndash; Friday

What You&rsquo;ll Be Doing 
&#10004; Manage major powertrain projects, including pre-production preparation of aluminum cylinder blocks, hybrid transmission cases, BEV e-Axle cases, and suspension members 
&#10004; Develop project budgets ($5M&ndash;$45M) and manage capital equipment/die procurement and installation 
&#10004; Plan and execute casting trials leading to start of production (SOP) 
&#10004; Study existing processes and develop NA-specific operation drawings to optimize production 
&#10004; Lead problem-solving efforts using standardized methodologies 
&#10004; Manage and coordinate project teams, including scheduling, contractor oversight, and consensus-building 
&#10004; Prepare documentation, cost justification proposals, and present capital projects for approval

What You Bring 
&#9989; Bachelor&rsquo;s degree in Engineering (Mechanical, Metallurgical, Electrical) or equivalent experience 
&#9989; 3+ years production preparation and/or manufacturing experience 
&#9989; 1+ year experience with major model changes impacting equipment, fixtures, tooling, and part quality 
&#9989; 1+ year project leadership experience, managing working groups and overall project milestones

Bonus Skills (Nice to Have) 
 3+ years casting or metals-related manufacturing engineering experience 
 High-pressure die casting experience 
 NC machining and Fanuc Robot system integration/troubleshooting experience 
 Toyopuc PLC system integration/troubleshooting experience 
 2D/3D CAD proficiency (AutoCAD, Creo, or similar) 
 Industrial PLC programming and troubleshooting skills 
 Experience leading projects with budgets exceeding $5M 
 Familiarity with JKK and Toyota Business Practices (TBP)

Interview Process 
 One-round STAR/Video interview (60 minutes with the hiring manager)

 If you&rsquo;re looking to contribute to cutting-edge powertrain casting projects in a collaborative, hands-on environment and grow your career with an industry-leading team, apply today!

Equal Opportunity Employer 
CrossSafety is committed to fostering an inclusive workplace. Accommodations for candidates with disabilities are available upon request. 
We appreciate all applicants' interest, but only those selected for an interview will be contacted.</div>

Manufacturing Engineer – Powertrain Casting

<div>About Us 
At CrossSafety, we specialize in providing comprehensive Health &amp; Safety consulting, engineering, and recruitment services across North America. With over 200 professionals supporting clients in industries ranging from manufacturing to logistics, we are committed to integrity, excellence, and innovation in everything we do.

We are currently seeking a talented and highly motivated Engineer to join our team in Georgetown, KY. This is an onsite role, and candidates must be available to work Monday through Friday.

About the Role 
In this position, you will play a key role in supporting the introduction of new paint colors and materials for automotive manufacturing. You will lead lab and on-line testing, manage project schedules, and collaborate with cross-functional teams to ensure successful material implementation.

 Work Location: Georgetown, KY (Onsite required) 
 Travel: Up to 15% domestic travel, primarily to project sites and supplier labs across the USA. 
 Safety Requirement: Steel toe boots required

What You&rsquo;ll Be Doing 
&#10004; Lead planning, evaluation, and implementation of new colors and materials for Body Paint and Bumper Paint departments 
&#10004; Conduct lab workability and on-line testing for new materials 
&#10004; Establish process controls and parameters for new materials and technologies 
&#10004; Lead materials-related problem-solving across multiple divisions as needed 
&#10004; Assess environmental impact of new materials and technologies 
&#10004; Report results and status updates to management and cross-functional teams

What You Bring 
&#9989; Bachelor&rsquo;s degree in Engineering or related field 
&#9989; Proficiency with Microsoft Office (Excel for analysis, PowerPoint for reporting and presentations) 
&#9989; Ability to work effectively in cross-functional teams 
&#9989; 2+ years of project management experience across multiple functions 
&#9989; 1+ year experience in color and appearance evaluations 
&#9989; 1+ year experience in paint design

Bonus Skills (Nice to Have) 
 Bachelor&rsquo;s or higher in Chemical Engineering, Chemistry, Materials Engineering, or Material Science 
 Automotive manufacturing experience in paint production engineering 
 Experience in paint application evaluation and lab workability testing

Interview Process 
 One-round STAR/Video interview (60 minutes with the hiring manager)

 If you&rsquo;re looking to contribute to innovative paint material projects in a collaborative environment and grow your career with an industry-leading team, apply today!

Equal Opportunity Employer 
CrossSafety is committed to fostering an inclusive workplace. Accommodations for candidates with disabilities are available upon request. 
We appreciate all applicants' interest, but only those selected for an interview will be contacted.</div>

Engineer - Car Manufacturing Paint Shop

<div>About Us 
At CrossSafety, we specialize in providing comprehensive Health &amp; Safety consulting, engineering, and recruitment services across North America. With over 200 professionals supporting clients in industries ranging from manufacturing to logistics, we are committed to integrity, excellence, and innovation in everything we do.

We are currently seeking a talented and detail-oriented Electrical Engineer to join our team in Princeton, IN. This is an onsite role, and we are looking for candidates based in the surrounding area or willing to relocate.

About the Role 
In this position, you will play a critical role in ensuring the precision, compliance, and reliability of advanced vehicle calibration systems. You&rsquo;ll develop detailed specifications, interface with vehicle ECUs, and collaborate with global teams to maintain industry-leading standards.

 Work Location: Princeton, IN (Onsite required) 
 Travel: Up to 20% across North America, with occasional trips to Japan 
 Driving Requirement: Must maintain a motor vehicle record acceptable by company standards

What You&rsquo;ll Be Doing 
&#10004; Developing detailed specifications to meet technical tolerances for vehicle calibration (headlamp aim, radar cruise control, etc.) 
&#10004; Interfacing computer hardware/software with vehicle ECUs via both wired and wireless methods 
&#10004; Interpreting technical standards related to vehicle calibration and communications 
&#10004; Utilizing AutoCAD, Catia, XVL, and Inventor to design and refine engineering solutions 
&#10004; Preparing reports, documentation, and presentations using MS Office 
&#10004; Collaborating with engineering teams across North America and Japan to align technical objectives

What You Bring 
&#9989; Bachelor of Science degree in Electrical Engineering (or Engineering with Electrical and Computer emphasis) 
&#9989; Strong written and verbal communication skills 
&#9989; Proficiency in AutoCAD, Catia / XVL / Inventor 
&#9989; Expertise in vehicle calibration standards and ECU communications 
&#9989; Ability to develop specifications that meet precise tolerances 
&#9989; Proficiency in MS Office (Outlook, Excel, Word) 
&#9989; Ability to travel up to 20% as required 
&#9989; Valid driver&rsquo;s license with a driving record meeting company standards

Bonus Skills (Nice to Have) 
 Ability to read Japanese 
 Electrical systems or systems engineering experience 
 Microcomputer and/or embedded systems expertise

Interview Process 
 One-round STAR/Video interview (60 minutes with the hiring manager).

 If you&rsquo;re looking to apply your engineering expertise to cutting-edge automotive technologies and collaborate with an industry-leading team, apply today!

Equal Opportunity Employer 
CrossSafety is committed to fostering an inclusive workplace. Accommodations for candidates with disabilities are available upon request. 
We appreciate all applicants' interest, but only those selected for an interview will be contacted.</div>

Electrical Engineer – Vehicle Calibration & Communications

Join CrossSafety Solutions Inc. and explore 4   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

CrossSafety Solutions Inc.

ABOUT_COMPANY

Mechanical Engineer– San Antonio, TX

Manufacturing Engineer – Powertrain Casting

Engineer - Car Manufacturing Paint Shop

Electrical Engineer – Vehicle Calibration & Communications