Qureos Mentor

Delaware Resource Group of Oklahoma, LLC

<div>Description:

This position is contingent upon contract award.
The Welder Combination Maintenance position will support barge berthing and messing facility operations. This role performs structural, mechanical, and piping repairs using multiple welding processes and assists with general maintenance for habitability, galley/messing systems, berthing structures, and marine support equipment.
Essential Duties and Responsibilities include, but are not limited to:<ul><li>Performs welding duties on light, heavy gauge and hardened metals using flat, vertical, horizontal, and overhead positions.</li><li>Performs welding processes such as preheating, brazing, beat welding, tack welding, flame cutting, pressure welding and heat-treating.</li><li>Performs supporting repairs for machinist tasks.</li><li>Performs supporting repairs for pipefitter and plumbing tasks.</li><li>Assists with the cleaning and sanitization duties for interior and exterior surfaces of the barge.</li><li>Clean, gas free safe for entry and hot work, inspect and test CHT system, replacing 4 floats per system (YR, YRBM, YRBM(L), and all APLs except for APL-61).</li><li>Clean, gas free safe for entry and hot work, inspect and test CHT system, replacing 4 floats per system (APL-61).</li><li>Clean, gas free safe for entry and hot work, inspect and test CHT system, replacing 3 floats per system (APL-67, 71, 73 Class).</li><li>Clean, gas free safe for entry and hot work, and air test tanks and voids. (APL-67, 71, 73 Class).</li><li>Clean, gas free safe for entry and hot work, and air test tanks and voids.</li><li>Accomplish a preliminary and final visual and operational inspection of all systems and equipment utilizing barge systems and equipment check off list (BSEC). Submit a detailed report of all discrepancies.</li><li>Performs the following miscellaneous repairs and replacement:</li></ul><ul><li>
Replace decking or bulkhead plating (15.3# O.S.)</li><li>
Replace hull plating (20.4# O.S.)</li><li>
Replace support structure (6&quot; x 4&quot; x 1/4&quot; tee bar, O.S.)</li><li>
Replace handrail</li><li>
Replace handrail safety chain (3/8&rdquo; chain to include shackle on each end)</li></ul>
Requirements:

Required Education and Experience<ul><li>
High School or GED mandatory</li><li>
Active DoD Personnel Security Clearance</li><li>
5+ years of experience in welding and metal fabrication in marine or industrial environments on multiple metal types.</li><li>
Demonstrated proficiency in multiple welding positions and processes such as Sheet Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), Gas Tungsten Arc Welding (GTAW) and fabrication.</li><li>
Proficient in tag out procedures and hot work requirements per OSHA and NAVSEA standards.</li></ul>
Certificates, Licenses, Registrations<ul><li>
Technical/professional welding certifications.</li></ul>
Supervisory Responsibilities<ul><li>
As Required.</li></ul>
Security Responsibilities<ul><li>
Eligible and obtain a DoD Personnel Security Clearance.</li><li>
Must comply with all company Information Systems security policies and procedures.</li><li>
May be responsible for proper classification and marking of all information and materials. Employee shall not divulge any information, or afford access to other employees not having a need-to-know authorization. Shall not divulge information outside the company without management approval. Will be required to execute company non-disclosure agreement prior to access to any controlled information.</li></ul>
Language Skills
Must be able to read, write, speak, and understand the English language. Must have the ability to read, analyze, and interpret complex words and technical documents/diagrams.
Must be able to effectively communicate orally and in writing and work effectively as part of a team.
Reasoning Ability and Mathematical Skills
Must be able to analyze problems, collect data, establish facts, and draw valid conclusions. An ability to interpret complex customer requirements and attitudes from verbal, non-verbal, and written communication is desirable. Must be able to calculate figures and numbers, and percentages and be able to draw and interpret graphs. Ability to read and understand electrical schematics and drawings.
Work Environment and Physical Demands
The work environment and physical characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.<ul><li>
Must be able to lift and/or move at least 50 pounds.</li><li>
Must be able to walk and/or climb stairs and ladders.</li><li>
Must be able to accommodate confined spaces.</li><li>
Must be able to stoop, bend, and crawl on top or under equipment.</li><li>
Must be able to detect odors, noises, bangs, etc., or other sounds to detect discrepancies of malfunctioning equipment.</li><li>
Must be able to distinguish colors.</li><li>
Must be able to perform Domestic and International travel as required.</li><li>
Shop floor environment.</li><li>
Will be working in areas with risk of injury from electrical applications, moving mechanical parts, hydraulic, or pneumatic systems under pressure and electrical motion systems.</li><li>
May be exposed to conditions of extreme heat, airborne particles, and loud noises.</li></ul></div>

Welder Combination, Maintenance

<div>Description:

This position is contingent upon contract award.
A System Support Specialist is responsible for providing troubleshooting assistance and problem resolution for workstations to include printers, desk phones, and company-provided mobile phone questions in a variety of environments. Such assistance and resolution are provided for personal computers, mini/mainframe computers, client servers as well Local Area Networks (LANs), Wide Area Networks (WANs), and web pages.
Essential Duties and Responsibilities include, but are not limited to:<ul><li>
Represent the Information Technology team when interacting with the workforce.</li><li>
Provide support for all Information Technology products and services.</li><li>
Install, troubleshoot, program, maintain, modify, repair, and replace (if needed) to original condition for voice and non-voice communication systems. Voice and non-voice communication systems include (but not limited) to switching equipment, consoles, relay racks, miscellaneous radio, intercom and public address systems; alarm systems; and telephone key systems; LAN computer data circuits, etc.</li><li>
Run cables or wire to telephone sets, terminal connectors, lugs, pins, or screws, associated with key telephone equipment and terminating equipment for non-voice circuits. Repair damaged or deteriorated telephone or other telecommunication wiring to original condition or replace from the pier side connection point to the craft including telephone jacks.</li><li>
Replace cracked, missing, or inoperative plug-in or screw connected telephone jacks.</li><li>
Answer questions, troubleshooting assistance, problem resolution, teaching or instructing others regarding software or hardware functionality, and communication policy.</li><li>
Determine the most effective manner to resolve personnel&rsquo;s technical issues.</li><li>
Engage in research and in-depth troubleshooting to resolve technical issues.</li><li>
Resolve support related issues independently but may escalate complex and/or high priority problems to the appropriate Information Technology team members for resolution.</li><li>
Verify suggested solutions effectively resolve the users' problems through verbal or email follow up.</li><li>
Provide assistance with personal computers, mini/mainframe computers, client servers, LANs, WANs, and web pages.</li><li>
Per contract requirements, must be able to respond to urgent calls outside of regular working hours.</li><li>
Other duties as identified and assigned</li></ul>
Requirements:

 Required Education and Experience<ul><li>
Associate&rsquo;s degree in Computer Science, Engineering, or related discipline.</li><li>
Active DoD Personnel Security Clearance</li><li>
Minimum 1 year experience providing workstation support.</li><li>
Ability to learn quickly and work independently.</li><li>
Experience with Windows 7 &amp; 10 Workstations.</li><li>
Experience with hardware repair (break-fix) and configuration/installation.</li><li>
Experience in Wireless network support.</li><li>
Knowledge of LAN/WAN networking.</li><li>
Knowledge of Microsoft Office Suite, MS Windows Server 2008 and above, Active Directory &amp; related software.</li><li>
Knowledge of Windows 7/10, Office 2010 and above and various other applications for installation and support.</li><li>
Knowledge of Administrative skills for Windows 7/10, Microsoft Office, Sophos Antivirus.</li><li>
Knowledge of Ethernet, cabling, hubs/switches, network protocols, printers, and multimedia presentation technologies support.</li><li>
Excellent customer service/problem-solving skills.</li><li>
Excellent communication skills both verbal and written.</li></ul>
Certificates, Licenses, Registrations<ul><li>
MCSE/MCSA certification</li><li>
Certifications: Microsoft MTA, CompTIA A+, Network+, Security+</li><li>
Experience with SMS, Active Directory and/or Group Policy.</li></ul>
Supervisory Responsibilities<ul><li>
As Required.</li></ul>
Security Responsibilities<ul><li>
Eligible and obtain a DoD Personnel Security Clearance.</li><li>
Must comply with all company Information Systems security policies and procedures.</li><li>
May be responsible for proper classification and marking of all information and materials. Employee shall not divulge any information, or afford access to other employees not having a need-to-know authorization. Shall not divulge information outside the company without management approval. Will be required to execute company non-disclosure agreement prior to access to any controlled information.</li></ul>
Language Skills
Must be able to read, write, speak, and understand the English language. Must have the ability to read, analyze, and interpret complex words and technical documents/diagrams.
Must be able to effectively communicate orally and in writing and work effectively as part of a team.
Reasoning Ability and Mathematical Skills
Must be able to analyze problems, collect data, establish facts, and draw valid conclusions. An ability to interpret complex customer requirements and attitudes from verbal, non-verbal, and written communication is desirable. Must be able to calculate figures and numbers, and percentages and be able to draw and interpret graphs. Ability to read and understand electrical schematics and drawings.
Work Environment and Physical Demands
The work environment and physical characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.<ul><li>
Must be able to lift and/or move at least 50 pounds.</li><li>
Must be able to walk and/or climb stairs and ladders.</li><li>
Must be able to accommodate confined spaces.</li><li>
Must be able to stoop, bend, and crawl on top or under equipment.</li><li>
Must be able to detect odors, noises, bangs, etc., or other sounds to detect discrepancies of malfunctioning equipment.</li><li>
Must be able to distinguish colors.</li><li>
Must be able to perform Domestic and International travel as required.</li><li>
Shop floor environment.</li><li>
Will be working in areas with risk of injury from electrical applications, moving mechanical parts, hydraulic, or pneumatic systems under pressure and electrical motion systems.</li><li>
May be exposed to conditions of extreme heat, airborne particles, and loud noises.</li></ul></div>

System Support Specialist

<div>Description:

This position is contingent upon contract award.
The Sheet-Metal Worker (Maintenance) supports berthing and messing operations aboard a U.S. Navy barge by fabricating, installing, repairing, and maintaining metal components and structures essential to barge habitability. This role ensures ventilation systems, ductwork, access panels, structural fittings, galley metalwork, and habitability fixtures remain in safe, serviceable, and compliant condition to support daily barge operations.
Essential Duties and Responsibilities include, but are not limited to:<ul><li>
Provide maintenance, repair to original condition, or replacement of metal components of barges and their installed equipment and facilities.</li><li>
Shall construct and install metal components in support of other repair activities.</li><li>
Shall maintain, repair, fabricate, and replace (if needed) to original and operable condition for metal working requirements, such as heating, bending to form metal shapes, drilling, torch cutting, hammer forging, grinding, welding, sawing and fitting of metal parts.</li><li>
Welding shall be performed on, but not limited to, light, heavy gauge and hardened metals using flat, vertical, horizontal, and overhead positions. Processes include, but not limited to, preheating, brazing, bead welding, tack welding, flame cutting, pressure welding and heat-treating.</li><li>
Performs machinist duties such as drilling, tapping, boring, reaming, and grinding a variety of materials such as steel, stainless steel, aluminum, copper, and brass.</li><li>
Assists in cleaning and sanitizing interior and exterior surfaces.</li><li>
May require support for pipefitting and plumbing maintenance.</li><li>
Performs maintenance to repair or replace fire fighting equipment.</li><li>
Accomplish a preliminary and final visual and operational inspection of all systems and equipment utilizing barge systems and equipment check off list (BSEC). Submit a detailed report of all discrepancies.</li><li>
Other duties as identified and assigned.</li></ul>
Requirements:

 Required Education and Experience<ul><li>
High school diploma or GED.</li><li>
Active DoD Personnel Security Clearance.</li><li>
Proven welding experience in industrial or marine environments.</li><li>
2+ years of sheet-metal fabrication or industrial metalwork.</li><li>
Experience with HVAC ducting, marine metalwork, or facility maintenance.</li><li>
Shipyard or maritime support experience.</li></ul>
Certificates, Licenses, Registrations<ul><li>
Welding, A/C, and ductwork certifications.</li></ul>
Supervisory Responsibilities<ul><li>
As Required.</li></ul>
Security Responsibilities<ul><li>
Eligible and obtain a DoD Personnel Security Clearance.</li><li>
Must comply with all company Information Systems security policies and procedures.</li><li>
May be responsible for proper classification and marking of all information and materials. Employee shall not divulge any information, or afford access to other employees not having a need-to-know authorization. Shall not divulge information outside the company without management approval. Will be required to execute company non-disclosure agreement prior to access to any controlled information.</li></ul>
Language Skills
Must be able to read, write, speak, and understand the English language. Must have the ability to read, analyze, and interpret complex words and technical documents/diagrams.
Must be able to effectively communicate orally and in writing and work effectively as part of a team.
Reasoning Ability and Mathematical Skills
Must be able to analyze problems, collect data, establish facts, and draw valid conclusions. An ability to interpret complex customer requirements and attitudes from verbal, non-verbal, and written communication is desirable. Must be able to calculate figures and numbers, and percentages and be able to draw and interpret graphs. Ability to read and understand electrical schematics and drawings.
Work Environment and Physical Demands
The work environment and physical characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.<ul><li>
Must be able to lift and/or move at least 50 pounds.</li><li>
Must be able to walk and/or climb stairs and ladders.</li><li>
Must be able to accommodate confined spaces.</li><li>
Must be able to stoop, bend, and crawl on top or under equipment.</li><li>
Must be able to detect odors, noises, bangs, etc., or other sounds to detect discrepancies of malfunctioning equipment.</li><li>
Must be able to distinguish colors.</li><li>
Must be able to perform Domestic and International travel as required.</li><li>
Shop floor environment.</li><li>
Will be working in areas with risk of injury from electrical applications, moving mechanical parts, hydraulic, or pneumatic systems under pressure and electrical motion systems.</li><li>
May be exposed to conditions of extreme heat, airborne particles, and loud noises.</li></ul></div>

Sheet-Metal Worker Maintenance

<div>Description:

This position is contingent upon contract award.
The Heating, Refrigeration, and Air Conditioning Mechanic performs preventive maintenance of all components, devices, equipment and associated systems that are essential to the proper operation of HVAC and R equipment and systems.
Essential Duties and Responsibilities include, but are not limited to:<ul><li>Performs preventive maintenance of all components, devices, equipment and associated systems including but not limited to refrigerants, compressors, blowers, motors, drive assemblies, fans, service valves, dampers, condensers, cooling coils, piping, pumps, purge units, control systems and wiring, duct work, burner assemblies, combustion chambers, thermostats and temperature controls, registers, condensate and drip pans and drains, grills, evaporators, air filters, heat/air conditioning units.</li><li>Replace and clean galley/messing equipment and fixtures, such as permanent filter sets, and all other items of equipment essential to the proper operation of HVAC and R equipment and systems.</li><li>HVAC repairs and maintenance on systems and components such as:</li></ul><ul><li>
Ventilation duct</li><li>
Ventilation duct diffusers</li><li>
Ventilation and duct inspection covers</li><li>
Thermostats</li><li>
Thermostat on Mitsubishi system</li><li>
Clean, inspect, and preserve HVAC Condenser Coils as required</li><li>
Clean indoor Mitsubishi units and 8 compressor units</li><li>
Replace disposable filters</li><li>
Fabricate and install vent screens</li><li>
Insulate and preserve vent duct with 1&rsquo; closed cell foam</li><li>Assist crewmates in the following (but not limited to):</li></ul><ul><li>
Cleaning and sanitizing duties of interior and exterior surfaces.</li><li>
Fumigation and extermination duties.</li><li>
Tie up or cast-off berthing barge (Down River)</li><li>
Sewage, potable water, steam, shore power, telephone, fire maintenance, gangways and cable television connection.</li><li>
1-inch KEVLAR mooring lines (150 ft in length) with 6&rsquo; loop in both ends and Chafing gear installed.</li><li>
 2-inch KEVLAR mooring lines (200 ft in length) with 6&rsquo; loop in both ends and Chafing gear installed.</li><li>
Winterization duties (all classes as required).</li><li>
Accomplish a preliminary and final visual and operational inspection of all systems and equipment utilizing barge systems and equipment check off list (BSEC). Submit detailed report of all discrepancies.</li><li>
Fire Fighting Equipment maintenance including replacement, repair, and maintenance.</li><li>
Other duties as identified and assigned.</li></ul>
Requirements:

 Required Education and Experience<ul><li>
High school diploma or GED required</li><li>
Active DoD Personnel Security Clearance</li><li>
3-5 years of commercial, industrial, marine, or shipyard HVAC/R experience</li><li>
Navy or maritime support experience</li></ul>
Certificates, Licenses, Registrations<ul><li>
EPA Section 608 Certification (Universal or Type I/II)</li></ul>
Supervisory Responsibilities<ul><li>
As Required.</li></ul>
Security Responsibilities<ul><li>
Eligible and obtain a DoD Personnel Security Clearance.</li><li>
Must comply with all company Information Systems security policies and procedures.</li><li>
May be responsible for proper classification and marking of all information and materials. Employee shall not divulge any information or afford access to other employees who do not have a need-to-know authorization. Shall not divulge information outside the company without management approval. Will be required to execute company non-disclosure agreement prior to access to any controlled information.</li></ul>
Language Skills
Must be able to read, write, speak, and understand the English language. Must have the ability to read, analyze, and interpret complex words and technical documents/diagrams. Must be able to effectively communicate orally and in writing and work effectively as part of a team. 
Reasoning Ability and Mathematical Skills
Must be able to analyze problems, collect data, establish facts, and draw valid conclusions. An ability to interpret complex customer requirements and attitudes from verbal, non-verbal, and written communication is desirable. Must be able to calculate figures and numbers, and percentages and be able to draw and interpret graphs. Ability to read and understand electrical schematics and drawings. 
Work Environment and Physical Demands
The work environment and physical characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.<ul><li>
Must be able to lift and/or move at least 50 pounds.</li><li>
Must be able to walk and/or climb stairs and ladders.</li><li>
Must be able to accommodate confined spaces.</li><li>
Must be able to stoop, bend, and crawl on top or under equipment.</li><li>
Must be able to detect odors, noises, bangs, etc., or other sounds to detect discrepancies of malfunctioning equipment.</li><li>
Must be able to distinguish colors.</li><li>
Must be able to perform Domestic and International travel as required.</li><li>
Shop floor environment.</li><li>
Will be working in areas with risk of injury from electrical applications, moving mechanical parts, hydraulic, or pneumatic systems under pressure and electrical motion systems.</li><li>
May be exposed to conditions of extreme heat, airborne particles, and loud noises.</li></ul></div>

Heating, Refrigeration, and Air Conditioning Mechanic

Join Delaware Resource Group of Oklahoma, LLC and explore 5   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

Delaware Resource Group of Oklahoma, LLC

About Company

Welder Combination, Maintenance

Welder Combination, Maintenance

System Support Specialist

Sheet-Metal Worker Maintenance

Heating, Refrigeration, and Air Conditioning Mechanic