Qureos Mentor

ENGIE Middle East

<div>
 Purpose
 
 
 The Planner/schedule shall liaise with the Plant O&amp;M departments for smooth functioning of work management process and shall be responsible for its proper implementation and execution to support equipment reliability and plant needs. You will support Planning Engineer and Planning Lead for plant routine maintenance and long-term planning in accordance with the Maintenance Department budget, OEM guidelines and Industry best Practices.
 
 
 You will coordinate the Plant planning meetings and resources to direct efficient and effective use of site resources to improve equipment reliability. The role requires hands on understanding and practical experience of the planning work requirements in a large power plant using SAP in a modern combined cycle gas turbine and desalination plant with a wide range of auxiliary equipment.
 
 
 Planner/Schedule shall have the responsibility for streamlining preventive, predictive and corrective maintenance programs in SAP. Monthly project status reports generation remains one of the key activities.
 
 
 Task &amp; Responsibilities
 
 
 Assist and drive Maintenance in their daily maintenance and outage duties. This shall include scheduling, planning, progress tracking of all major activities by preparing milestone charts, project and development programs. Responsible to ensure compliance of IMS.
 
 
 
 Planning &amp; Scheduling:
 
 
 
 <ul>
 <li>
 Plan and monitor major outages, shutdowns, and turnaround activities, including resource forecasting.
 </li>
 <li>
 Prepare and update milestone charts, project schedules, and progress reports.
 </li>
 <li>
 Ensure the week ahead system implementation.
 </li>
 <li>
 Drive towards a continuous optimization of the PM overall schedule. Follow-up and track the backlogs on corrective work and planned works.
 </li>
 <li>
 Follow-up and drive the O&amp;M team to reach scheduled and/or optimized outage targets.
 </li>
 <li>
 Ensure performance and warranty-related activities are integrated into maintenance schedules.
 </li>
 <li>
 Planning, Scheduling and Monitoring of Power Plant
 
 
 </li>
 </ul>
 
 Coordination &amp; Communication:
 
 
 
 <ul>
 <li>
 Support to develop and implement new maintenance strategies like FMEA and RCM.
 </li>
 <li>
 Review, develop and implement proven maintenance programs in preventive &amp; predictive maintenance programs using SAP
 </li>
 <li>
 Shall liaise with the Planning Engineer to incorporate all performance and warranty related activities in daily and/or long-term outage planning.
 </li>
 <li>
 Drive the Maintenance team in completion of CM and PM as per planned schedule. Forecast and review all necessary resources (labor, material, contractors, experts&hellip;)
 </li>
 <li>
 Daily coordinator between O&amp;M teams during Power Unit and MED outage activities. Preparation and updating of shutdown activity list per priority for every Unit.
 </li>
 <li>
 Coordinate the planning of Routine Maintenance and act as a medium of change from reactive to proactive maintenance.
 </li>
 <li>
 Plan and coordinate with Maintenance Department for corrective maintenance repairs, performance of preventive maintenance and surveillance, and the implementation of modifications.
 </li>
 <li>
 Coordinate planning meetings to align priorities, resolve conflicts, and ensure smooth execution.
 </li>
 <li>
 Track maintenance backlogs and support continuous schedule optimization.
 
 
 </li>
 </ul>
 
 Reporting &amp; Monitoring:
 
 
 
 <ul>
 <li>
 Generate and distribute daily, weekly, and monthly maintenance and outage planning reports.
 </li>
 <li>
 Monitor compliance with IMS, HSE standards, and corporate procedures.
 </li>
 <li>
 Provide progress tracking and variance analysis for planned vs. actual work.
 </li>
 <li>
 Optimization &amp; Continuous Improvement.
 </li>
 <li>
 Identify and recommend improvements to planning processes, tools, and reporting systems.
 
 
 </li>
 </ul>
 
 Skills &amp; Competencies:
 
 
 
 <ul>
 <li>
 Proficiency in using SAP, MS Project and use of MS Office programs.
 </li>
 <li>
 Proficiency in SAP PM, MS Project, and Primavera P6 (preferred).
 </li>
 <li>
 Strong analytical, problem-solving, and organizational skills.
 </li>
 <li>
 Ability to work under pressure and manage competing priorities.
 </li>
 <li>
 Effective communicator and team player with cross-functional teams.
 </li>
 <li>
 Knowledge of maintenance KPIs and performance monitoring.
 
 
 </li>
 </ul>
 
 Key Stakeholders (Internal &amp; External):
 
 
 
 <ul>
 <li>
 Operations &amp; Maintenance Teams
 </li>
 <li>
 Contractors &amp; OEM Representatives
 </li>
 <li>
 Reliability/Engineering Teams
 </li>
 <li>
 Plant &amp; Department Management
 
 
 </li>
 </ul>
 Business Unit: GBU Renewables &amp; Flexible Power
 
 
 Division: GEN International - KSA
 
 
 Legal Entity: JUBAIL O&amp;M COMPANY LIMITED
 
 
 Professional Experience: Skilled ( &gt;3 experience &lt;15 years)
 
 
 Education Level: Technical College Diploma
 
 
 Company Name: ENGIE Saudi Arabia
</div>

Planner

<div>
 Position Summary:
 
 
 The Field Operator will be responsible for the local operations of the plant to ensure it meets the required availability, reliability, efficiency, generation and cost targets, safely and within strict environmental limits. This will include regular equipment start-ups, shutdowns, changeovers and regular operation/ monitoring, as well as responding to alarms and emergency conditions. The role requires a detailed understanding and practical experience of the technologies associated to operating a modern Gas Turbine Plant, Desalination plant and wide range of auxiliary equipment.
 
 
 Functions/ Task:
 
 
 Safety, Quality &amp; Environment
 
 
 <ul>
 <li>
 Responsible to ensure compliance of IMS. Perform all operational activities in line with the safety management system and environment management system.
 </li>
 <li>
 Responsible to perform the assigned duties and other duties in-line with implementation of safety rules.
 </li>
 <li>
 Provide monitoring for the ongoing maintenance jobs on assigned areas.
 </li>
 <li>
 Reporting of unsafe conditions and behaviors.
 
 
 </li>
 </ul>
 Plant Operations
 
 
 <ul>
 <li>
 Conducts routine plant checks i.e. plant round ups and completion of log sheets.
 </li>
 <li>
 Perform operational actions under direction from the CRO (i.e. Valve operations, switching on/ off pumps or resetting the local alarms etc) to avoid any abnormal plant operations or to correct existing abnormalities.
 </li>
 <li>
 Prepare plant for start ups in accordance with approved operations procedure.
 </li>
 <li>
 Performs plant shut down and extended shut down preservation of plant routines in accordance with approved operations procedure. Performa manual intervention actions during trip conditions and maintain close supervision to ensure and maintains close supervision to ensure safe run down of plant.
 </li>
 <li>
 Practical application of safety rules performing safe plant isolations from the system to allow routine maintenance activities. De-isolates and restores plant equipment safely to the system.
 </li>
 <li>
 Perform routine maintenance activity on the plant such as lube oil top-up, filter replacement and other operational activities.
 </li>
 <li>
 Support CRO during emergency situation.
 </li>
 <li>
 Carry out the sample analysis of the plant process steam water cycle in cases where chemist is not on-site and on Demin water, distillate, portable water and other samples.
 </li>
 <li>
 Monitor and evaluates performance of various plant system and equipment.
 </li>
 <li>
 Responsible for maintaining safety and housekeeping of the plant.
 </li>
 <li>
 Initiates routine operational activities.
 </li>
 <li>
 Complete the field operator&rsquo; skill matrix and work as acting CRO and take complete charge of power and desal blocks as CRO.
 
 
 </li>
 </ul>
 Maintenance Activities
 
 
 <ul>
 <li>
 Perform lube oil top up as required on plant equipment.
 </li>
 <li>
 Perform routine site inspections on routine basis to regular update plant equipment status.
 </li>
 <li>
 Carry out dewatering routine in specified areas of the plant as required.
 
 
 </li>
 </ul>
 Raising Work Orders Regarding Defects and Abnormal Conditions
 
 
 <ul>
 <li>
 Raise service request in system for defects and coordinate with Shift Engineer for approval.
 </li>
 <li>
 Assistance to maintenance personnel to pinpoint equipment defects when necessary.
 
 
 </li>
 </ul>
 Management of Plant Chemicals:
 
 
 <ul>
 <li>
 Responsible for changing over of chemical tanks.
 
 
 </li>
 </ul>
 Maintaining Water Quality
 
 
 <ul>
 <li>
 To ensure the export quality of potable water to meet with WHO guidelines and potable water quality standard set in Agreement.
 
 
 </li>
 </ul>
 Policies &amp; Procedures
 
 
 <ul>
 <li>
 Follow all relevant operational procedures and instructions so that work is carries out in a controlled and consistent manner.
 
 
 </li>
 </ul>
 Communications &amp; Working Relationships.
 
 
 <ul>
 <li>
 Daily communication of plant operational issues and defects with the CRO and Shift Engineer and other team members.
 </li>
 <li>
 Daily co-ordination and cooperation with CRO and Maintenance Staff for routine and emergency operational and maintenance activities.
 </li>
 <li>
 Follow the shift hand over protocol and communication protocol as per the approved procedures.
 
 
 </li>
 </ul>
 Frame Work, Boundries, &amp; Decision Making Authority
 
 
 <ul>
 <li>
 The job holder operates under the general guidance of the CRO.
 </li>
 <li>
 Any extra-ordinary issues arising outside of set policies and procedures are to be referred to the CRO/ Shift In charge for discussion and approval of recommended actions.
 
 
 </li>
 </ul>
 Accountable for Outcomes:
 
 
 1. Plant HSE objectives and goals.
 
 
 <ul>
 <li>
 Audit of compliance to corporate, safety and environment standards.
 </li>
 <li>
 Reporting Incidents and Near Miss and perform safety walkdown as per the KPIs assigned to him.
 </li>
 <li>
 Quality of Operations Roundups, Log Sheets, Data Entry, &amp; Raised Work Orders.
 </li>
 <li>
 Maintenance of Plant Water Chemistry, Distillate &amp; Potable Water Quality.
 </li>
 <li>
 Application of proper Isolations &amp; De-Isolations as per safety documentation and other safety precautions.
 </li>
 <li>
 Efficient management of plant chemical.
 </li>
 <li>
 Effective planning of safe chemical tank change over.
 </li>
 <li>
 Compliance with the portable water quality requirements.
 </li>
 <li>
 Training and development of OJTs and junior staff
 </li>
 <li>
 Completion of Operation&rsquo;s skill matrix for his development
 
 
 </li>
 </ul>
 Business Unit: GBU Renewables &amp; Flexible Power
 
 
 Division: GEN International - KSA
 
 
 Legal Entity: JUBAIL O&amp;M COMPANY LIMITED
 
 
 Professional Experience: Junior (experience &lt; 3 years)
 
 
 Education Level: Technical College Diploma
 
 
 Company Name: ENGIE Saudi Arabia
</div>

Field Operator

<div>
 
 
 Digital Engineer
 
 
 
 
 
 
 Position Overview
 
 
 The Senior Software Engineer will report directly to the Digital Lead of MENA . This role is responsible for designing and implementing software applications and digital tools with the primary objective of improving and automating business processes. The ultimate goal is to enhance work productivity and process efficiency throughout the organization.
 
 
 A central component of this position involves maintaining the SAP S4H system for KSA HQ and GCC, providing user support, and working to increase the effectiveness and adoption of SAP within the business. Additionally, the Digital Engineer will represent KSA and GCC in Group Data Hub initiatives, ensuring all solutions comply with Group data standards.
 
 
 
 
 
 Key Accountabilities
 
 <ul>
 <li>
 Understand business requirements and translate them into effective software application solutions.
 </li>
 <li>
 Develop software solutions , ensuring compatibility with Group applications, while collaborating closely with relevant business functions.
 </li>
 <li>
 Provide SAP support to KSA and GCC business users and promote the adoption of new SAP features to automate processes and boost productivity.
 </li>
 <li>
 Liaise with SAP support providers to escalate and resolve technical issues promptly, ensuring that affected users are kept informed throughout the process.
 </li>
 <li>
 Collaborate with business functions to implement and maintain various business systems
 </li>
 <li>
 Work in partnership with the ENGIE Group applications team to represent KSA and GCC businesses during the implementation of Group applications.
 </li>
 <li>
 Provide advice and guidance to BU entities on software development projects.
 </li>
 <li>
 Evaluate existing applications and perform necessary updates to ensure operational continuity.
 </li>
 <li>
 Ensure all business applications are compliant with licensing requirements.
 </li>
 <li>
 Develop and maintain comprehensive technical documentation for all applications.
 </li>
 <li>
 Conduct risk assessments and business impact analyses before deploying changes from development into the live environment.
 </li>
 <li>
 Adhere to ENGIE&rsquo;s cybersecurity requirements during application development and implementation.
 </li>
 <li>
 Maintain confidentiality when handling sensitive, personal, or business-critical data.
 </li>
 <li>
 Perform regular updates and patches on software applications, accompanied by appropriate business impact analysis to ensure business continuity.
 </li>
 <li>
 Follow the software development lifecycle (SDLC) methodology to ensure the sustainability and maintainability of all developed applications.
 </li>
 </ul>
 
 
 
 
 Key Relationships
 
 
 Internal Interfaces
 
 <ul>
 <li>
 KSA and GCC HQ business functions
 </li>
 <li>
 BU Entities
 </li>
 <li>
 ENGIE Corporate applications team
 </li>
 </ul>
 
 
 
 
 External Interfaces
 
 <ul>
 <li>
 External third-party suppliers and service providers
 </li>
 </ul>
 
 
 
 
 Qualifications
 
 <ul>
 <li>
 Graduate degree, preferably in Computer Science or Information Technology
 </li>
 <li>
 Internationally recognized certification in software application development
 </li>
 </ul>
 
 
 
 
 Experience
 
 <ul>
 <li>
 Minimum of 4 years of professional software development experience
 </li>
 <li>
 Strong knowledge of programming for various operating systems and platforms using a range of development tools
 </li>
 <li>
 Strong knowledge of Power Bi and Power apps, and Microsoft office 365 copilot.
 </li>
 <li>
 Familiarity with SAP 4Hana,
 </li>
 </ul>
 
 
 
 Knowledge and Skills
 
 <ul>
 <li>
 Proficiency in Java or C++ and object-oriented design principles
 </li>
 <li>
 Expertise in business intelligence tools, such as Microsoft PowerBI&reg;, Power Apps
 </li>
 <li>
 Experience with development on Microsoft Office 365 and Azure cloud platforms
 </li>
 <li>
 In-depth knowledge of SAP 4Hana implementation and its various modules
 </li>
 <li>
 Familiarity with GenAI, such as Microsoft office 365 copilot
 </li>
 <li>
 Understanding of functional areas across different departments to support SAP requests
 </li>
 <li>
 Knowledge of professional software engineering and best practices, covering the full software development lifecycle, including coding standards, code reviews, source control management, build processes, testing, and operations
 </li>
 <li>
 Awareness of IT project management methodologies, such as PRINCE2 and PMP
 </li>
 </ul>
 
 
 
 
 Soft Skills and Behavioral Capabilities
 
 <ul>
 <li>
 Results-oriented mindset
 </li>
 <li>
 Customer focus
 </li>
 <li>
 Effective time-management skills
 </li>
 <li>
 Innovation and flexible thinking
 </li>
 <li>
 Acceptance of diversity
 </li>
 <li>
 Excellent communication skills, with fluency in both verbal and written English
 </li>
 <li>
 Awareness of cultural differences and ability to adapt communication style accordingly
 </li>
 <li>
 Attention to detail
 </li>
 <li>
 Full compliance with safety and environmental responsibilities in all work activities
 </li>
 </ul>
 
 
</div>

Digital Engineer

Join ENGIE Middle East and explore 3   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

ENGIE Middle East

ABOUT_COMPANY

Planner

Field Operator

Digital Engineer