Qureos Mentor

Feedco

Job Vacancy: Senior Mechanical TechnicianCompany: FeedcoCompany Field: Animal Feed ManufacturingAs per the requirements below:Duties and responsibilities:Routine/preventive maintenance (oil changes, filters, fluid levels, etc.)Diagnosing mechanical, hydraulic, electricalReplacing or repairing defective components (engines, brakes, transmissions, etc.)Testing performance and safety compliance of repaired systemsWorking with technical manuals, diagrams, using diagnostic tools and test equipmentKeeping records of work done, parts used, inspections etc.Ensuring safety &amp; environmental regulations are followedInspect engines and mechanical/electrical components.Use diagnostic tools and software to identify issues.Perform routine servicing (oil changes, filter replacements, etc.).Follow preventative maintenance schedules.Report issues found and repairs done for compliance and tracking.Required Qualifications:diploma degree in mechanical engineering or automotive dieselExperience: 3 - 5 years in automotive diesel and Heavy Vehicle MechanicJob Type: Full-timeEducation:<ul><li>Diploma (Preferred)</li></ul>Experience:<ul><li>3 Years : 5 years (Required)</li></ul>

Senior Mechanical Technician

Job Vacancy: Control Room OperatorCompany: FeedcoCompany Field: Animal Feed ManufacturingAs per the requirements below:Duties and responsibilities:Operating PLC &amp; SCADA Systems for Efficient Production ControlManaging Batching, Grinding, Mixing, and Pelleting ProcessesAssisting in Quality Control &amp; Maintenance TroubleshootingProduction Scheduling &amp; CoordinationEquipment Maintenance &amp; TroubleshootingWorkflow Optimization &amp; EfficiencySafety Compliance &amp; Risk ManagementData Analysis &amp; ReportingTeam Supervision &amp; TrainingProcess Improvement &amp; TroubleshootingBatch Formulation &amp; Ingredient HandlingRequired Qualifications:Bachelor&rsquo;s degree in production engineering, mechanical engineering or electrical engineering.Previous experience with PLC &amp; SCADA Systems for Efficient Production Control of at least 5 years, with 3 years in feed mills.Job Type: Full-timeEducation:<ul><li>Bachelor's (Required)</li></ul>Experience:<ul><li>3 Years : 5 years (Required)</li></ul>

Control Room Operator

Job Vacancy: Senior Mechanical Engineer Company: FeedcoCompany Field: Animal Feed ManufacturingAs per the requirements below:Duties and responsibilities:Responsible for the maintenance and repair of mechanical systems, equipment, and conveyors.Conduct mechanical failure analysis and provide effective solutions.Supervise the installation of new mechanical equipment and ensure its compliance with industry standards.Suggest improvements to mechanical processes to increase efficiency.Train technicians on mechanical equipment handling.Ensure understanding of annual maintenance plans and receive daily and emergency tasks during the shift.Supervise and monitor the maintenance team during the shift to ensure efficient and effective completion of tasks.Develop and implement procedures and maintenance schedules to reduce downtime and increase productivity.Conduct periodic inspections and reviews to identify areas for improvement and address any equipment or facility issues.Maintain accurate records of maintenance activities, including work orders, repairs, and equipment inventory.Maintain records of daily routine checklists/weekly motor checklists/weekly preventive maintenance schedules/quarterly preventive maintenance.Develop and manage a maintenance budget to optimize resources and control costs.Collaborate with other departments, such as production, quality, and warehouses, to support operational and emergency maintenance needs.Ensure compliance with regulations and safety procedures to create a safe work environment.Required Qualifications:Bachelor&rsquo;s degree in mechanical engineering.At least 10 years of experience in industrial maintenance, 5 years in feed mills.Strong leadership skills and the ability to work under pressure.PLC, SCADA, DCS, Lean Manufacturing, LSSBB, Kaizen, TPM systems are certified.Skills and Abilities:Ability to give instructions and lead a team regarding electrical and mechanical problems.Diagnose faults, find root causes, and implement continuous improvement.A deep background in automation systems.Strong analytical skills.Ability to make quick decisions.Effective communication skills.Familiarity with maintenance management systems.Job Type: Full-timeEducation:<ul><li>Bachelor's (Required)</li></ul>Experience:<ul><li>5 Years : 10 years (Required)</li></ul>

Senior Mechanical Engineer

Job Vacancy: Maintenance ManagerCompany: FeedcoCompany Field: Animal Feed ManufacturingAs per the requirements below:Duties and responsibilities:1. Maintenance Management:Developing periodic, preventive, and corrective maintenance plans to ensure the efficient operation of the plant's production lines, including equipment and machinery.Supervising the daily implementation of scheduled and emergency plans and programs, ensuring adherence to approved procedures and schedules.2. Fault Analysis:Diagnosing and analyzing technical faults to determine root causes using appropriate measurement tools to identify trends and improve performance.Developing policies and strategies to improve equipment efficiency and reduce breakdowns.3. Team Management:Leading the maintenance team and assigning tasks on a daily and effective basis, ensuring that all members understand their roles and work together.Supervising ongoing team training to improve skills and reduce future breakdowns.Encouraging innovation and researching new solutions for the technologies used.4. Coordination with other departments:Collaborating with the production department to ensure the availability of the necessary equipment for production and planning for emergency shutdowns.Preparing the annual parts budget and ensuring the availability of materials according to the schedule approved by the plant management.Communicating with relevant parties to obtain the necessary spare parts and services.5. Reporting:Documenting malfunctions, maintaining team activity logs, and evaluating performance after repairs to ensure the problem does not recur.Preparing periodic reports on equipment status and completed maintenance work, measuring progress and compliance.Keeping plant management informed of challenges and achievements and providing periodic reports detailing maintenance status and future needs.6. Compliance with Standards:Ensuring adherence to quality, safety, and occupational health standards in all maintenance activities.Required Qualifications:Bachelor&rsquo;s degree in mechanical or electrical engineering or a related field.At least 10 years of experience in maintenance management in an industrial environment, with 5 years in feed mills.Strong leadership skills and the ability to work under pressure.Good knowledge of modern maintenance systems and analysis tools, ERP systems, and asset management systems. Knowledge of certified systems such as TPM, Lean Manufacturing, Kaizen, and Feed Milling.Skills and Abilities:A deep background in automation systems.Strong analytical skills.Ability to make quick decisions and effective communication skills.Familiarity with maintenance management systems.Job Type: Full-timeEducation:<ul><li>Bachelor's (Required)</li></ul>Experience:<ul><li>6 Years : 10 years (Required)</li></ul>

Maintenance Manager

Job Vacancy: ElectromechanicalCompany: FeedcoCompany Field: Animal Feed ManufacturingAs per the requirements below:Duties and responsibilities:Diagnose and maintain faults (electrical and mechanical) in tools, machines, control systems, and production lines.Handle input/output signals in programmable logic controllers (PLCs) and troubleshoot related issues.Assemble, disassemble, evaluate, test, and maintain equipment to ensure efficient operation, including motors, pumps, and gearboxes.Replace dies, cylinders, and consumables, as well as lubricate and change oils.Respond to emergency maintenance instructions and address problems with root causes and continuous process improvement.Prepare and review spare parts periodically and coordinate with the warehouse to request them via the ERP system.Implement periodic, routine, and preventive maintenance based on the plan approved by management.Maintenance plan: daily routine, weekly engine inspection checklist, and quarterly preventive maintenance.Monitor all machinery in the factory according to annual and any plans approved by the Maintenance Manager, including work orders (WOs), spare parts requests.Adhere to quality standards, occupational health and safety, and labor laws.Any other duties related to the job.Qualifications Requirements:University diploma in mechatronics, electromechanical, or electrical control engineering with 5 years of industrial experience or a related field.At least 5 years of experience in maintenance in an industrial environment, 3 years in a feed mill.Strong leadership skills and the ability to work under pressure.Approved skills in PLC, SCADA, Lean Manufacturing, Kaizen, and TPM systems.Skills and Abilities:Ability to properly diagnose, detect, and address electrical and mechanical faults.Understanding technical drawings and electrical and mechanical schematics to facilitate installation and maintenance operations.Diagnose faults, find root causes, and implement continuous improvement.Strong background in the feed industry.Strong analytical skills.Familiarity with maintenance management systems.Job Type: Full-timeEducation:<ul><li>Diploma (Required)</li></ul>Experience:<ul><li>3 Years : 5 years (Required)</li></ul>

Electromechanical

Job Vacancy: Electrical EngineerCompany: FeedcoCompany Field: Animal Feed ManufacturingAs per the requirements below:Duties and responsibilities:Responsible for the maintenance and repair of electrical systems, electrical panels, and control equipment.Conduct electrical fault analysis and provide appropriate solutions.Supervise the installation of new electrical equipment and ensure its compliance with industry standards.Keep up with the latest electrical technologies and provide recommendations for improvement.Train technicians on handling electrical equipment.Ensure understanding of annual maintenance plans and receive daily and emergency tasks during the shift.Supervise and monitor the maintenance team during the shift to ensure efficient and effective completion of tasks.Develop and implement procedures and maintenance schedules to reduce downtime and increase productivity.Conduct periodic inspections and reviews to identify areas for improvement and address any equipment or facility issues.Maintain accurate records of maintenance activities, including work orders, repairs, and equipment inventory.Maintain records of daily routine checklists/weekly motor checklists/weekly preventive maintenance schedules/quarterly preventive maintenance.Develop and manage a maintenance budget to optimize resources and control costs.Collaborate with other departments, such as production, quality, and warehouses, to support operational and emergency maintenance needs.Ensure compliance with regulations and safety procedures to create a safe work environment.Required Qualifications:Bachelor&rsquo;s degree in electrical engineering, specializing in Controls or a related field.At least 10 years of experience in industrial maintenance, with 5 years in feed mills.Strong leadership skills and the ability to work under pressure.PLC, SCADA, DCS, Lean Manufacturing, LSSBB, Kaizen, TPM systems are certified.Skills and Abilities:Ability to give instructions and lead a team regarding electrical and mechanical problems.Diagnose faults, find root causes, and implement continuous improvement.A deep background in automation systems.Strong analytical skills.Ability to make quick decisions.Effective communication skills.Familiarity with maintenance management systems.Job Type: Full-timeEducation:<ul><li>Bachelor's (Required)</li></ul>Experience:<ul><li>3 Years : 5 years (Required)</li></ul>

Electrical Engineer

Job Vacancy: Automation EngineerCompany: FeedcoCompany Field: Animal Feed ManufacturingAs per the requirements below:Duties and responsibilities:- Develop and design automated control systems for plant equipment and machinery, and lead projects related to systems and their accessories.- Conduct scheduled and comprehensive tests to ensure the effectiveness of systems, sensors, and tools related to controlling manufacturing processes. Collect and analyze data and requirements to identify appropriate technical solutions and implement them within the MES system to improve performance and efficiency.- Identify faults and maintain systems to ensure smooth and efficient operation.- Train work teams on the use of systems and provide full support regarding automation technologies.- Work with production, maintenance, and IT teams to ensure system integration.- Propose and implement improvements to production processes through the application of automation technologies.- Prepare technical documentation and reports related to operating and automation systems and their updates.- Keep up with the latest technologies and innovations in the field of automation and their implementation in the plant.- Familiarity with and understanding of annual maintenance plans, daily and emergency tasks during the shift.- Supervise and monitor the maintenance team during the shift to ensure efficient and effective completion of tasks.- Develop and implement maintenance procedures and schedules to reduce downtime and increase productivity.- Conduct periodic inspections and reviews to identify areas for improvement and address any equipment or facility issues.- Maintain accurate records of maintenance activities, including work orders, repairs, and equipment inventory.- Maintain daily routine checklists/weekly motor checklists/weekly preventive maintenance schedules/quarterly preventive maintenance.- Develop and manage a maintenance budget to optimize resources and control costs.- Collaborate with other departments, such as production, quality, and warehouse, to support operational and emergency maintenance needs.- Ensure compliance with regulations and safety procedures to create a safe work environment.Required Qualifications:- Bachelor&rsquo;s degree in industrial engineering, Production Engineering, or Electrical Power Engineering, with a specialization in SCADA or PLC.- Previous experience with automation systems of at least 5 years, with 7 years in a manufacturing environment.- Strong leadership skills and the ability to work under pressure.PLC, SCADA, DCS, Lean Manufacturing, LSSBB, Kaizen, TPM are certified skills in systemsJob Type: Full-timeEducation:<ul><li>Bachelor's (Required)</li></ul>Experience:<ul><li>5 Years : 7 years (Required)</li></ul>

Automation Engineer

Join Feedco and explore 7   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.