Urwah Admin

McDermott

<div><p><b>Job Overview:
</b></p><p>The Senior Piping Designer completes a variety of Piping Design assignments as needed and can complete work with a limited degree of supervision. They are an informal resource for colleagues with less Piping Design experience. They developed proficiency in a range of analytical processes or procedures to carry out assigned tasks. They provide solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures. They directly impact the quality of the work of the team.</p></div>
<br><div><div>Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
<br>
<br>
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.</div></div>
<br><div><p><b>Key Tasks and Responsibilities:
</b></p><ul><li>Develop 3D Models and ensure clash free model in coordination with all other disciplines requirements
</li><li>Perform Design and engineering process facilities within a specified time while adhering to maintenance, safety and quality standards; consider constructability, economics and operation into account during Pre-FEED, FEED or Detailed Design phases
</li><li>Work within defined processes and procedures or methodologies and may help determine the appropriate approach for new assignments
</li><li>Complete a variety of typical assignments as needed efficiently and with limited degree of supervision and facilitates the work activities of others
</li><li>Set priorities, organize own work and time to meet objectives, and (as Lead Designer or Area Lead) forecast and plan resource requirements
</li><li>When acting as Lead Designer or Area Lead designer, in addition:
<ul><li>Lead the design team to complete the tasks within the planned schedule and budget, in accordance with standards, McDermott and project-specific procedures
</li><li>Act as project-based discipline point of contact in communications and meetings with Project Team, Client, vendor/supplier and/or subcontractor counterparts
</li><li>Ensure that the inter-discipline aspects of the design and deliverables are addressed
</li><li>Support Lead Piping Engineer in measuring the progress and productivity
</li><li>Coordinate all activities within own discipline and discipline interfaces with other disciplines
</li></ul></li><li>Ensure effective communications among other disciplines and effective management of change
</li><li>Coordinate 3D Model Reviews and ensure Review comments are closed
</li><li>Become fully familiar with Project Scope of Work, specifications, schedule and inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address them
</li><li>Develop Plant Design and 3D Modelling, Drawings and input into Plant Layout Narrative in accordance with the agreed Scope of Work, man-hours, and schedule
</li><li>Assist Lead Piping Engineer/ Designer in raising technical queries, preparing the piping estimate and job scope changes,
</li><li>Attend (As lead Piping Designer) project Kickoff and Review meetings, Vendor meetings
</li><li>Monitor and coordinate the design team remotely if required and Lead a project in a Multi Office Project Execution Environment (MOPEX)
</li><li>Identify changes to scope and promptly raise change notification in the Change Management System
</li><li>Able to identify issue as soon as they arise and follow up with any required corrective action
</li><li>Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures
</li><li>Act as an informal resource for colleagues with less experience
</li><li>Ensure that the work is carried out in accordance with McDermott requirements, Client and Statutory Design Codes, Standards or Procedures with particular focus on Health and Safety Policies
 </li></ul><p>Reports to:
 <br>
Project: Lead Piping Engineer (As Lead Piping Designer) Lead Piping Designer
 <br>
Functional: Department Manager
 <br>
Liaise With: Designers and Engineers, other Engineering disciplines Lead designer and designers, IM Group, Document
 <br>
Control
 <br>
Supervises: Piping Designer and Associate Piping Designer</p></div>
<br><div><p><b>Essential Qualifications and Education:
</b></p><ul><li>High School graduate with a diploma in Mechanical Design, or Drafting in a related discipline or equivalent experience
</li><li>10 years min with major contractor or consultant of which 4+ years of experience in oil and gas performing Pre-FEED, FEED and Detailed Design
</li><li>Detailed knowledge of 3D CAD system including E3D or SP3D
</li><li>Minimum 1 or 2 projects working experience in E3D and/or S3D
</li><li>Detailed knowledge of AutoCAD
</li><li>Familiar with associated local regulatory environment and international and national industry standards and specifications
</li><li>A general understanding of how process equipment is maintained and operated
</li><li>Auto lisp Programming, 3D Model creation, Menu and/or Macro compilation skills would be an advantage
</li>Flexible for business travel<br>
<li>
</li></ul><p><br>
#LI-MW2</p></div>

Senior Piping Designer

<div><p><b>Job Overview:
</b></p><p>The Senior Construction Support Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Construction Support (Eng) -related problems and will work independently with minimal guidance. The Senior Construction Support Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in Construction Support (Eng). As such, they must have in-depth expertise in Construction Support (Eng) as well as broad knowledge of the Construction Support (Eng) discipline within the Engineering function.</p></div>
<br><div><div>Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
<br>
<br>
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.</div></div>
<br><div><p><b>Key Tasks and Responsibilities:
</b></p><ul><li>Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards
</li><li>Direct Engineering team as a Project Coordinator on small projects
</li><li>Apply knowledge and skills to a wide range of standard and nonstandard situations
</li><li>Prepare clear and accurate detailed design calculations and analyses including design reports and procedures
</li><li>Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area
</li><li>Clearly communicate and explain complex issues and work to establish understanding
</li><li>Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues
</li><li>Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders
</li><li>Interface with all disciplines to develop clash-free designs
</li><li>Interface with other departments to obtain input for discipline designs and drawings
</li><li>Maintain close cooperation with other engineering disciplines, Planning, Fabrication, Marine, and Project Management Teams, as required
</li><li>Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager
</li><li>Assist in the preparation of estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates
</li><li>Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements
</li><li>Prepare Discipline engineering design basis, philosophies, and technical specifications, as required
</li><li>Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity
</li><li>Attend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required
</li><li>Provide technical direction and review of Designers producing products related to Construction/Installation Support Engineering
</li><li>Prepare and review design reports and procedures
</li><li>Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables
</li><li>When assigned, assist procurement personnel in producing Discipline equipment, materials, and services; ensuring that work produced complies with customer objectives and procedures Procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer
</li><li>Check engineering performed by others within the Discipline
</li><li>Perform design verification through single-discipline check/inter-discipline check (IDC)
</li><li>Provide technical support to all fabrication queries, including identifying defect/rectification requirements
</li><li>Keep the Lead engineer apprised of all activities and concerns, technical, budgetary, and manpower related
</li><li>Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity
</li><li>Participate in internal, Customer, and third-party technical audits on engineering deliverables and vendor documents
</li><li>Assist Lead engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval
</li><li>Capture lessons learned and enter into MDR&rsquo;s Lessons Learned system
</li><li>Act as a resource for colleagues with less experience
</li><li>Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.
</li><li>Be aware of costs related to own work and of the discipline
</li><li>In FabCSE, perform/review designs, analyses, evaluations, calculations, and procedures such as:
<ul><li>Erection sequences for jackets, topsides, and other structures
</li><li>Loadout procedures and guidance during the operations
</li><li>Construction lift analyses and procedures for activities such as floatover, stackings roll-ups, etc.
</li><li>Weighing procedures
</li><li>Design and detailing of miscellaneous fabrication yard items
</li><li>Crane arrangements and rigging arrangements
</li><li>Trailer arrangements/operations, including drawings and procedures
</li></ul></li><li>Assist the Lead Engineer in coordinating critical operations pre-activity meetings and attend yard critical operations
</li><li>Additional skills (preferred, not mandatory) - perform/review Pipeline Installation Engineering designs, analyses, evaluations, calculations, and procedures for transportation and installation:
<ul><li>Submarine pipelines
</li><li>Risers
</li><li>Spools
</li><li>PLETS and manifolds
</li><li>Cables
 </li></ul></li></ul><p>Reports to:
 <br>
Functional: Discipline Lead Engineer
 <br>
Liaise With: All Engineering disciplines, Fabrication Group, Safety Dept, Document Control, Procurement Group, Project
 <br>
Management Team, Subcontractors and Vendors, and Customers.
 <br>
Supervises: Engineers</p></div>
<br><div><p><b>Essential Qualifications and Education:
</b></p><ul><li>Bachelor&rsquo;s degree in Naval Architecture, Civil / Structural / Mechanical Engineering (Master&rsquo;s degree preferred)
</li><li>8-15 years of experience in oil and gas with a major contractor or consultant predominantly performing construction and installation design
</li><li>Strong working knowledge of many design techniques and analysis methods, and detailed knowledge of the content and application of standards codes and guidelines as applicable for onshore and offshore construction
</li>Preferably Registered Professional Engineer or member of a professional engineering society<br>
<li>
</li></ul><p></p><p>#LI-AL2</p></div>

Senior Construction Support Engineer

<div><p><b>Job Overview:
</b></p><p>The Senior Completions Specialist (Fab) uses best practices and knowledge of internal or external issues to improve the Completions (Fab) discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Completions (Fab) discipline. The Senior Completions Specialist (Fab) solves complex problems and uses discipline-specific knowledge to improve their products or services. The Senior Completions Specialist (Fab) impacts a range of customer, operational, project, or service activities with the Completions (Fab) team and other related teams. It ensures they work within the appropriate guidelines and policies.</p></div>
<br><div><div>Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
<br>
<br>
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.</div></div>
<br><div><p><b>Key Tasks and Responsibilities:
</b></p><ul><li>Review project-specific Scope of Work and other relevant information and specifications for Project Mechanical Completion execution
</li><li>Request qualified Engineers and Supervisors to support Mechanical Completion execution
</li><li>Request adequate equipment, tools, and consumables to be used during Mechanical Completion activities
</li><li>Coordinate with the Fabrication Coordinator on schedules and potential cost impact
</li><li>Coordinate with HSE Officers on Task Risk Assessment implementation
</li><li>Request Manpower, materials, and procedures
</li><li>Prepare and identify Mechanical Completion Inspection and Test Records required in PIMS
</li><li>Supervise Mechanical Completion, discipline engineers
</li><li>Prepare execution plans and Mechanical Completion strategies
</li><li>Prepare general procedures for implementation of Mechanical Completion-related activities
</li><li>Allocate budget and estimated person-hours for Mechanical Completion-related activities
</li><li>Define systems limits
</li><li>Prepare Mechanical Completion Management System
</li><li>Support and disseminate Engineering policies and yard procedures and participate in any improvements
</li><li>Support Division Engineering by providing input to the bid and historical data from the projects
</li><li>Attend/provide training and provide feedback/improvement as required</li></ul></div>
<br><div><p><b>Essential Qualifications and Education:
</b></p><ul><li>Bachelor&rsquo;s degree in Engineering preferred
</li><li>8+ years of experience with Hookup and commissioning activities for the offshore O&amp;G industry with exposure to handling PIMS completion management system, punch list, preservation management, and handover process
</li><li>Hookup and commissioning activities with exposure in handling PIMS completion management system and coordination among various parties such as EPC, client, vendor, sub-cons, and Fabrication team to get system completions certificate and handover
</li>High standard of safe working practice, quality, and productivity, as well as compliance with the code of business conducts<br>
<li>
</li></ul><p></p><p>#LI-AL2</p></div>

Senior Completions Specialist (Fab) ( MC / PL Coordinator)

<div><p><b>Job Overview:
</b></p><p>The Principal Piping Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Piping-related problems and will work independently with minimal guidance. The Principal Piping Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of Piping. As such, they must have in-depth expertise in Piping as well as broad knowledge of the Piping discipline within the Engineering function.</p></div>
<br><div><div>Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
<br>
<br>
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.</div></div>
<br><div><p><b>Key Tasks and Responsibilities:
</b></p><ul><li>Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budget
</li><li>Apply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations and report them to the Project Management Team and Department Manager at an early stage
</li><li>Prepare detailed design calculations and analyses including design reports and procedures
</li><li>Manage own time to meet objectives and forecast and plan resource requirements
</li><li>Lead others to solve complex problems, use sophisticated analytical thought to exercise judgment, and identify innovative solutions
</li><li>Interpret internal/external business challenges and recommend best practices to improve technology, processes, or services
</li><li>Explain difficult concepts and negotiate with others to adopt a different point of view
</li><li>Focused on health and safety policies and procedures
</li><li>When acting as Lead engineer:
<ul><li>Direct medium or large Engineering and Design team as a Lead Engineer
</li><li>Lead the Discipline engineering design of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard
</li><li>Plan, organize, and direct all aspects of discipline execution of the assigned project including scope, deliverables, schedule, and manpower resources
</li><li>Ensure interfaces and deliverables are clearly identified
</li><li>Maintain responsibility for progress and productivity, identifying any required corrective action
</li><li>Act as project representative for the discipline during meetings with the project team, Client, and relevant agencies such as certifying authorities, auditors, third parties, etc.
</li></ul></li><li>Become fully familiar with the project SoW, Specification, Schedule, and all inter-discipline requirements
</li><li>Interface with other departments to obtain input for engineering and design
</li><li>Interface with High-Value Centers (HVECs) ensuring a clear understanding of their SoW
</li><li>Prepare Iso Curve based on required input in line with Project Level 3 Schedule
</li><li>When acting as Lead Engineer or area Lead:
<ul><li>Review the Piping budget, and provide Piping input for the Project Execution Plan
</li><li>Plan, organize, and assign tasks, responsibilities, and man-hour budgets to piping sub-discipline and verify tasks are completed within budgets
</li><li>Support 3D-Model review at 30%, 60% &amp; 90% progress
</li><li>Provide Piping Discipline input into Plan Level 2, 3, and 4 schedules and review the dependencies
</li><li>Prepare discipline forecasts identifying changes to scope and promptly raising a notification
</li><li>Alert the team of any deviation from the Scope of work or a need for a change order
</li><li>Provide piping man-hours, schedule, and deliverables list including Piping Discipline Execution Plan
</li><li>Check and approve design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions in accordance with the project scope of work and contract
</li><li>Monitor KPI measurement results and take corrective action
</li><li>Lead Piping Discipline during project internal or External Audits
</li></ul></li><li>Assist the Department Manager in the Performance Evaluation of Piping team members
</li><li>Support proposals and studies
 </li></ul><p>Reports to:
 <br>
Project: Lead Engineer, Project Engineer or Project Manager
 <br>
Functional: Department Manager
 <br>
Liaise With: Designers and Engineers, other Engineering disciplines Leads, Construction &amp; Fabrication Group,
 <br>
Project Management Team, Document Control, Project Cost Control and Planning Group, Procurement Group,
 <br>
Subcontractors and Vendors, Client
 <br>
Supervises: Piping Engineering and Layout Team</p></div>
<br><div><p><b>Essential Qualifications and Education:
</b></p><ul><li>Bachelor's Degree or Master's Degree in Mechanical Engineering
</li><li>15-20 years of experience as a Piping Engineer in Oil and gas with a major contractor performing Conceptual, Pre-FEED, FEED, and detail design
</li><li>Previous experience as Lead Piping Engineer on FEED and EPC projects via Multi-offices Project Execution
</li><li>Detailed knowledge of Pre-FEED, FEED, and Detailed Design Phases Projects
</li><li>Detailed knowledge and experience of design techniques and application of standards, codes, and guidelines
</li><li>Familiar with all Piping Sub-Disciplines including Design and Modelling, Pipe Stress &amp; Support, Piping Material Engineering, and MTO activities and deliverables
</li><li>Knowledgeable in project coordination and execution skills
</li><li>Conversant with international codes and standards like ANSI, ASME, API, BS, NFPA, etc.
</li><li>Familiar with SP3D / E3D / Navisworks
</li><li>Familiar with stick-built and modularization approach
</li><li>Preferably Registered Professional Engineer or member of a professional engineering society
</li><li>Familiar with commercial aspects of projects and types of contracts
</li><li>Committed to McDermott values
</li><li><p>Flexible for Business travel<br>
</p></li></ul><p></p><p>#LI-MW2</p></div>

Principal Piping Engineer

<div><p><b>Job Overview:
</b></p><p>The Principal Piping Designer directly impacts the effectiveness of their team and related team. They exchange ideas and information relating to Piping Design effectively. The Principal Piping Designer may work autonomously within established Piping Design procedures and practices. They act as a lead, coordinating the work of others. The Principal Piping Designer proposes improvements to processes and methods within the Piping Design discipline.</p></div>
<br><div><div>Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
<br>
<br>
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.</div></div>
<br><div><p><b>Key Tasks and Responsibilities:
</b></p><ul><li>Perform Design and Engineering process facilities within a specified time while adhering to maintenance, safety, and quality standards, consider constructability, economics, and operation into account during Pre-FEED, FEED, or Detailed Design phases
</li><li>Develop 3D Models and ensure clash free model in coordination with all other disciplines requirements,
</li><li>Approve drawing including plot plans as per project specifications, McDermott Procedures, Process Design practice
</li><li>Complete assignments and facilitate the work activities of others
</li><li>Set priorities, organize own work and time to meet objectives, and (as Lead Designer) forecast and plan resource requirements
</li><li>When acting as Lead Designer, in addition:
<ul><li>Lead the design team to complete the tasks within the planned schedule and budget, in accordance with standards, McDermott, and project-specific procedures
</li><li>Act as project-based discipline point of contact in communications and meetings with Project Team, Client, vendor/supplier, and/or subcontractor counterparts
</li><li>Ensure that the inter-discipline aspects of the design and deliverables are addressed
</li><li>Support Lead Piping Engineer in measuring the progress and productivity
</li><li>Coordinate all activities within own discipline and discipline interfaces with other disciplines
</li><li>Ensures effective communications among other disciplines and effective management of change
</li><li>Coordinate 3D Model Reviews and ensure Review comments are closed
</li></ul></li><li>Is fully familiar with the Project Scope of work, specifications, schedule, and inter-discipline requirements
</li><li>Develop Plant Design and 3D Modelling, Drawings in accordance with work hours and schedule
</li><li>Add input into the Plant Layout Narrative in accordance with the agreed Scope of work
</li><li>Identify issues as soon as they arise and follow up with any required corrective action
</li><li>Identify changes to scope and promptly raise change notifications in the Change Management System
</li><li>When acting as Lead Designer, assist the Lead Piping Engineer in raising technical queries, preparing the piping estimate and job scope changes
</li><li>Attend project Kickoff, Review meetings, Vendor meetings, model reviews
</li><li>When acting as Lead or area lead, monitor and coordinate the design team (remotely if required)
</li><li>When acting as Lead or area lead, lead the project in a Multi Office Project Execution Environment (MOPEX)
</li><li>Support and supervise less-experienced members within the design team
</li><li>Ensure that the work is carried out in accordance with McDermott requirements, Client and Statutory Design Codes, Standards, or Procedures with a particular focus on Health and Safety Policies
</li><li>Support the Department Manager with the Designer's appraisals
</li><li>Exercise judgment, based on previous experience, practices, and precedents, to identify and solve problems that arise with little or no precedent
</li><li>Exchange ideas and information effectively and is direct when dealing with others
 </li></ul><p>Reports to:
 <br>
Project: Lead Piping Engineer, Lead Piping Designer
 <br>
Functional: Supervising Department Manager
 <br>
Liaise With: Lead Designers, Engineers, all other Engineering disciplines Leads assigned to the project, Project Engineer, IM
 <br>
Group, Document Control, and Client representatives.
 <br>
Lead Designers and Designers, Engineers, other Engineering and Design disciplines assigned to the project, Project Engineer,
 <br>
IM Group, Document Control, and Client representatives
 <br>
Supervises: Piping Design team assigned to a project or part of the project during the detailing and production phases</p></div>
<br><div><p><b>Essential Qualifications and Education:
</b></p><ul><li>10 years min with major contractor or consultant of which 10+ years of experience in oil and gas performing Pre-FEED, FEED, and Detailed Design
</li><li>High School graduate with a diploma in Mechanical Design, or Drafting in a related discipline or equivalent experience
</li><li>Detailed knowledge of 3D CAD system including E3D or SP3D
</li><li>Minimum 1 or 2 projects working experience in E3D and/or S3D
</li><li>Detailed knowledge of AutoCAD and/or Auto lisp
</li><li>Familiar with the associated local regulatory environment and international and national industry standards and specifications
</li><li>Capable of Leading projects
</li><li>General understanding of how process equipment is maintained and operated
</li><li>Programming, 3D Modeling, Menu, and/or Macro compilation skills would be an advantage
</li><li>Flexible for business traveling/assignments
</li>Knowledge of QA Systems and a good communicator<br>
<li>
</li></ul><p><br>
#LI-MW2</p></div>

Principal Piping Designer

<div><p><b>Job Overview:
</b></p><p>The Principal Operations Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Operations-related problems and will work independently with minimal guidance. The Principal Operations Engineer may be responsible for leading functional teams or projects and are regarded as a specialist in the field of Operations. As such, they must have in-depth expertise in Operations as well as broad knowledge of the Operations discipline within the Fabrication function.</p></div>
<br><div><div>Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
<br>
<br>
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.</div></div>
<br><div><p><b>Key Tasks and Responsibilities:
</b></p><ul><li>Review and approve installation procedures and engineering to ensure they meet the project and McDermott minimum requirements and follow good engineering practices and enable work to be performed safely
</li><li>Supervise the Field Engineers in their planning and execution of the offshore project
</li><li>Supervise the Field Engineers during the preparation of material lists for construction materials and liaise with the Project Coordinator for procurement of requirements in a timely manner
</li><li>Resolve any technical problems that arise during offshore installation and assist in any corrective action that is required
</li><li>Ensure there is coordination with the Fabrication/Loadout Contractor affecting operations under supervision
</li><li>Liaise with the fabrication hook-up group on the projects that they are responsible for and provide them with the required marine support equipment and logistics assistance
</li><li>Develop the scope of work, assist in the award of subcontracts, and then coordinate the same
</li><li>Review invoices received from vendors and subcontractors for errors or omissions in work performed or materials supplied
</li><li>Provide or coordinate input to the tender process as required
</li><li>Ensure conformance to Level 2 procedures for all the project-specific wire rope applications and rigging
</li><li>Manage the project fabrication inter/intra-function coordination throughout various phases with engineering, SCM, detail design, fabrication, and hook-up
</li><li>Identify resource needs for the fabrication portion of the project and report the fabrication status of the project with minimal guidance
</li><li>Lead and develop the project&rsquo;s fabrication execution strategy
</li><li>Understand the overall project scope of work to lead and guide the multi-discipline production engineering team to meet project fabrication deliverables in line with the fabrication sequence/schedule
</li><li>Manages project fabrication progress within schedule, and productivity within targeted budget in coordination with the project Construction Manager and Project Construction Superintendent
</li><li>Appraises functional and project management on project fabrication status including issues which is expected to impact the forecasted progress, productivity, and schedule commitments with possible mitigation plans
</li><li>Lead the Fabrication Bid coordination efforts on assigned Bid projects including completing the deliverables to meet submission dates
</li><li>Interface with key project personnel from various functions like Engineering, SCM, Quality, Cost control, Marine Operations, hook up etc. to meet priorities and schedule dates for project fabrication requirements
</li><li>Ensure necessary documentation and compliance with procedural requirements throughout the project/Bid phases
</li><li>Establish a productive working relationship with client and third-party representatives
</li><li>Conduct Fabrication and Load out HAZID meeting with all project stakeholders and fab team
</li><li>Conduct Fabrication readiness meetings with all the functional leads and ensure the continuity of fabrication
</li><li>Manage any scope of work changes and ensure AFC estimates are getting updated in line with the scope changes
</li><li>Chair the fabrication kick-off meeting at the commencement of the project</li></ul></div>
<br><div><p><b>Essential Qualifications and Education:
</b></p><ul><li>Bachelor&rsquo;s degree in any relevant Engineering Discipline
</li><li>5 to 7 years of experience in the Offshore Industry
</li><li>At least 2 years of supervisory experience
</li>Working knowledge of design and offshore project execution<br>
<li>
</li></ul><p></p><p>#LI-AL2</p></div>

Principal Operations Engineer

<div><p><b>Job Overview:
</b></p><p>The Commissioning Engineer applies their conceptual knowledge of Commissioning (Eng) and, with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward Commissioning (Eng) problems. They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers. The Commissioning Engineer understands critical business drivers and applies this knowledge to solve problems in straightforward situations by analyzing possible solutions using technical experience, judgment, and precedents.</p></div>
<br><div><div>Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
<br>
<br>
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.</div></div>
<br><div><p><b>Key Tasks and Responsibilities:
</b></p><ul><li>Report to the Commissioning Manager and provide support to the Principal Commissioning Engineer in the preparation of home office deliverables
</li><li>At the site, participate in walk-down inspections, punch listing, and testing including troubleshooting of mechanical, electrical &amp; instrument component issues that can arise on the project
</li><li>Work collaboration within the Project team and with the Client to maintain positive relationships
</li><li>Required to support the commissioning team with performing any of the following activities as a minimum
<ul><li>Operate and maintain Manuals development
</li><li>Commissioning and Start-up Spares development
</li><li>First Fills and Consumables development
</li><li>Commissioning and Start-Up Procedures
</li><li>Discipline Equipment system checks and tests
</li><li>Function testing of mechanical, electrical, and instrument systems
</li><li>Participate in Commissioning, Start-Up, and Performance Testing
</li><li>Resolve operational and maintenance issues during Commissioning, Start-Up, and Performance Tests
</li></ul></li><li>Supervise craft personnel required for site pre-commissioning and commissioning activities
</li><li>Coordinate activities with other engineers in the commissioning team
 </li></ul><p>Reports to:
 <br>
Project: Project Commissioning Manager
 <br>
Functional: Function Commissioning Manager
 <br>
Liaise with: Commissioning Manager, Discipline Lead Engineers, Project Engineers, Construction/Fabrication team
 <br>
Supervises: Support personnel within the function group</p></div>
<br><div><p><b>Essential Qualifications and Education:
</b></p><ul><li>Bachelor&rsquo;s degree or equivalent in Engineering
</li><li>3-8 years of experience in oil and gas with a major contractor or consultant
</li><li>Requires a good understanding of concepts, principles, and practices in commissioning, completions, and training as well as basic knowledge of other functions, such as construction and operations &amp; maintenance
</li><li>Applies understanding of the industry to improve effectiveness
</li><li>Preferably possess a degree or diploma or equivalent in engineering
</li><li>Have a minimum of 3 years of experience in a chemical, refinery, or oil &amp; gas process facility
</li><li>Prefer 2+ years of previous commissioning and start-up experience in the chemical, refinery, or oil &amp; gas industry
</li><li>Able to effectively communicate technical solutions and concepts to other engineers and non-engineers
</li><li>Must have good computer software skills in MS Word, Excel, PowerPoint, Visio
</li><li>Must have good organizational skills and be adaptable to the needs of various discipline groups
</li><li>Must have the ability to assess and communicate project requirements and expectations in a clearly defined, positive, and productive manner
</li><li>Willing and able to travel to construction sites on assignments to international sites
</li><li>Proficiency in English, Multi-Language skills a plus
</li></ul><p>#LI-AL2</p></div>

Commissioning Engineer - Electrical

Join McDermott and explore 29   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.