Qureos Mentor

McDermott International, Ltd

<div>
 
 Job Overview
 
 
 
 
 JOB DESCRIPTION
 
 
 
 Principal Package Management Specialist utilizes their technical acumen, commercial acumen, management skills, and leadership skills to oversee all aspects of delivering a package from the cradle to the grave. Their core responsibility is ensuring the package is delivered on budget and on schedule while abiding by Quality, Health, Safety, Environment, and Security (QHSES) and project requirements. A successful Principal Package Management Specialist identifies risks and opportunities sets up mitigation and captures plans accordingly. This entails developing a strategic outlook for the package and ensuring that all matters are resolved with the involvement of the right stakeholders and in a timely fashion. Principal Package Management Specialist must report status and outlook at an executive level to the Project Management team and, at times, Corporate Management.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities
 
 
 
 <ul>
 <li>
 Deliver a package (purchase orders and/or subcontracts) on budget and schedule, and abide by QHSES and project requirements; Complexity, criticality, and value of packages typically vary and are assigned and adjusted at the discretion of the function and project
 </li>
 <li>
 Maintain a clear and thorough dialogue with the Project Management Team, and provide accurate and periodic status updates as well as both short and long-term outlooks
 </li>
 <li>
 Identify risks and opportunities, and maintain a strategic outlook throughout the execution of the package; Such discussion is to be held periodically with the Project Management team for buy-in
 </li>
 <li>
 Maintain an accurate account of the package cost, commitments, changes, and forecast
 </li>
 <li>
 Provide inputs and ensure alignment with Project Controls on current and forecasted cost and schedule.
 </li>
 <li>
 Maintain an accurate account of the package cost, commitments, changes, and forecast
 </li>
 <li>
 ROS dates to be analyzed with the schedulers to identify priorities and, if applicable, Installation Work Packages and Advance Work Packages to be set up and implemented
 </li>
 <li>
 Track cost and schedule bid basis against actuals
 </li>
 <li>
 Interface with all stakeholders to achieve package goals; Stakeholders include but are not limited to the Supplier/Subcontractor, Engineering, Supply Chain, QHSES, Construction, Installation (if applicable), Commissioning, Joint Venture Partners, and, as needed, the client
 </li>
 <li>
 Arrange and attend periodic status meetings with suppliers and clients as required
 </li>
 <li>
 Manage formal correspondence with suppliers, clients, and other involved parties
 </li>
 <li>
 Attend key meetings such as the progress meeting, kick-off meeting, PIM, and others
 </li>
 <li>
 Oversee and enforce all day-to-day applicable processes involved and interface across various functions to identify and resolve any technical or commercial matters, and if unavoidable, then resolve any bottlenecks
 </li>
 <li>
 Enforce the Management of Change process and Project Change Notices
 </li>
 <li>
 Oversee the documentation process and manage priorities to ensure the most effective delivery from a cost and schedule aspect; This conversation must be coordinated between the suppliers, McDermott, and the client as applicable
 </li>
 <li>
 Review key documents such as Technical Bid Evaluations, Commercial Bid Evaluations, Purchase Orders, and supplier data
 </li>
 <li>
 Work with the end user to ensure alignment and expectations are met
 </li>
 <li>
 Ensure that the prime contract flow downs are correctly administered, including variations
 </li>
 <li>
 Oversee the planning, performance, and resource allocation of their team throughout the project
 </li>
 <li>
 Could potentially report to the Package Manager or Senior Package Manager on a project
 </li>
 <li>
 Develop and maintain contingency planning and lessons learned
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s Degree (or equivalent) in Engineering or Supply Chain Management (or a relevant discipline).
 </li>
 <li>
 8-12 years of relevant experience (ideally in Engineering, Project/Package Management, Manufacturing, or similar)
 </li>
 <li>
 Technical knowledge of all phases of an Engineering, Procurement, Construction, and Installation (EPCI) project and specific knowledge in the domain of the proposed packages is preferred
 </li>
 <li>
 Commercial knowledge of contracts, purchase orders, and relevant disciplines within the Supply Chain function, such as proposals, purchasing, expediting, logistics, and material management
 </li>
 <li>
 Strong understanding and adherence to QHSES requirements and ability to ensure compliance
 </li>
 <li>
 Understands the requisitioning process from the bid stage through clarifications until Purchase Order award and post-award activities such as execution, receiving, and at time commissioning
 </li>
 <li>
 Proactive attitude in determining opportunities and risks, particularly those attributed to Quality, Safety, Budget, and Schedule
 </li>
 <li>
 Characteristics of a leader that naturally relates to all members of the team, from the floor to the project team and executive management
 </li>
 <li>
 Effective communicator with strong written, verbal, and public speaking skills
 </li>
 <li>
 Willing to travel to various locations such as the shops, supplier offices and headquarters, job sites, labs, and other relevant locations as needed; At times, there may be a requirement for an extended deployment at a supplier&rsquo;s location or the job site
 </li>
 <li>
 PMP and/or PE is a plus
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
 For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
 
 
</div>

Principal Package Management Spec

<div>
 
 Job Description
 
 
 
 
 Job Overview:
 
 
 
 IT Pillar Specialist - Hexagon S3D Administrator will be responsible for Providing support for admin activities for HEXAGON S3D projects. They will be responsible for setting up project for HEXAGON S3D and day to day administration activities, manage delivery of project deliverables. They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers. Knowledge of AVEVA Engineering, AVEVA Net/AIM is an added advantage.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities:
 
 
 
 <ul>
 <li>
 Customization
 </li>
 <ul>
 <li>
 S3D Catalog Creation
 </li>
 <ul>
 <li>
 Piping Specs and Catalog. Should have good understanding of piping rules.
 </li>
 <li>
 Equipment, Electrical, Instrumentation and Structure Catalog Creation.
 </li>
 <li>
 Symbol Creation.
 </li>
 </ul>
 <li>
 Isometric Customization
 </li>
 <ul>
 <li>
 Piping Isometric Customization including creation of labels.
 </li>
 </ul>
 <li>
 View Style Creation
 </li>
 <ul>
 <li>
 GA drawings view styles for Piping, Electrical, Instrumentation and Structural
 </li>
 </ul>
 <li>
 Reports Creation
 </li>
 <ul>
 <li>
 Should have good understanding of S3D Interfaces and class relationships.
 </li>
 <li>
 Should have extensive report creation abilities using COM. Report creation using VB.Net/C# is an added advantage.
 </li>
 </ul>
 <li>
 Custom Commands
 </li>
 <ul>
 <li>
 Custom commands creation using C# and VB.Net
 </li>
 </ul>
 </ul>
 <li>
 Administration activities
 </li>
 <ul>
 <li>
 Setup
 </li>
 <ul>
 <li>
 Should be well versed with GWC configuration.
 </li>
 <li>
 Should have hands on experience with S3D Setup activities which includes database restoration/Permission Groups and setting up of system hierarchy.
 </li>
 <li>
 Should have hands of experience in Interference setup and codeless interference rules.
 </li>
 <li>
 Should have hands on experience in creating Naming Rules.
 </li>
 <li>
 Should have hands on experience in creating filters, surface style rules and creation of review files (SPR and Navisworks)
 </li>
 <li>
 Should have capability of handling SQL and Oracle Servers and Databases.
 </li>
 </ul>
 <li>
 Resolution of Designer Issues
 </li>
 <ul>
 <li>
 Should be well versed with modelling procedures and should have hands on experience in troubleshooting designer issues and development of best practices for modelling.
 </li>
 </ul>
 <li>
 Additional:
 </li>
 <li>
 Exposure to Software skills on Aveva 3D or any other Smartplant tool
 
 </li>
 </ul>
 </ul>
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education:
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Engineering, Computer Science, or related field
 </li>
 <li>
 Minimum 5-15 years&rsquo; experience in S3D Administration. Utilizes current systems technology, tools and processes to achieve these aims. Good understanding of engineering practices &amp; project execution concepts.
 </li>
 <li>
 Good communication skills are a must
 </li>
 <li>
 Working knowledge of the business units or processes supported by the application
 </li>
 <li>
 In-depth understanding of Aveva 3D or any other Smartplant tool.
 </li>
 <li>
 Ability to conduct functional testing of the application
 </li>
 <li>
 Complete understanding of data use, processes, and output
 
 
 </li>
 </ul>
 #DICE
 
 
 
 About Us
 
 
 
 Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
 For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
 
 
</div>

IT Pillar Specialist

<div>
 
 Job Description
 
 
 
 
 Job Overview:
 
 
 
 The Senior Construction Support Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Construction Support (Eng) -related problems and will work independently with minimal guidance. The Senior Construction Support Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in Construction Support (Eng). As such, they must have in-depth expertise in Construction Support (Eng) as well as broad knowledge of the Construction Support (Eng) discipline within the Engineering function.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities:
 
 
 
 <ul>
 <li>
 Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards
 </li>
 <li>
 Direct Engineering team as a Project Coordinator on small projects
 </li>
 <li>
 Apply knowledge and skills to a wide range of standard and nonstandard situations
 </li>
 <li>
 Prepare clear and accurate detailed design calculations and analyses including design reports and procedures
 </li>
 <li>
 Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area
 </li>
 <li>
 Clearly communicate and explain complex issues and work to establish understanding
 </li>
 <li>
 Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues
 </li>
 <li>
 Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders
 </li>
 <li>
 Interface with all disciplines to develop clash-free designs
 </li>
 <li>
 Interface with other departments to obtain input for discipline designs and drawings
 </li>
 <li>
 Maintain close cooperation with other engineering disciplines, Planning, Fabrication, Marine, and Project Management Teams, as required
 </li>
 <li>
 Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager
 </li>
 <li>
 Assist in the preparation of estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates
 </li>
 <li>
 Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements
 </li>
 <li>
 Prepare Discipline engineering design basis, philosophies, and technical specifications, as required
 </li>
 <li>
 Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity
 </li>
 <li>
 Attend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required
 </li>
 <li>
 Provide technical direction and review of Designers producing products related to Construction/Installation Support Engineering
 </li>
 <li>
 Prepare and review design reports and procedures
 </li>
 <li>
 Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables
 </li>
 <li>
 When assigned, assist procurement personnel in producing Discipline equipment, materials, and services; ensuring that work produced complies with customer objectives and procedures Procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer
 </li>
 <li>
 Check engineering performed by others within the Discipline
 </li>
 <li>
 Perform design verification through single-discipline check/inter-discipline check (IDC)
 </li>
 <li>
 Provide technical support to all fabrication queries, including identifying defect/rectification requirements
 </li>
 <li>
 Keep the Lead engineer apprised of all activities and concerns, technical, budgetary, and manpower related
 </li>
 <li>
 Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity
 </li>
 <li>
 Participate in internal, Customer, and third-party technical audits on engineering deliverables and vendor documents
 </li>
 <li>
 Assist Lead engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval
 </li>
 <li>
 Capture lessons learned and enter into MDR&rsquo;s Lessons Learned system
 </li>
 <li>
 Act as a resource for colleagues with less experience
 </li>
 <li>
 Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.
 </li>
 <li>
 Be aware of costs related to own work and of the discipline
 </li>
 <li>
 In FabCSE, perform/review designs, analyses, evaluations, calculations, and procedures such as:
 </li>
 <ul>
 <li>
 Erection sequences for jackets, topsides, and other structures
 </li>
 <li>
 Loadout procedures and guidance during the operations
 </li>
 <li>
 Construction lift analyses and procedures for activities such as floatover, stackings roll-ups, etc.
 </li>
 <li>
 Weighing procedures
 </li>
 <li>
 Design and detailing of miscellaneous fabrication yard items
 </li>
 <li>
 Crane arrangements and rigging arrangements
 </li>
 <li>
 Trailer arrangements/operations, including drawings and procedures
 </li>
 </ul>
 <li>
 Assist the Lead Engineer in coordinating critical operations pre-activity meetings and attend yard critical operations
 </li>
 <li>
 Additional skills (preferred, not mandatory) - perform/review Pipeline Installation Engineering designs, analyses, evaluations, calculations, and procedures for transportation and installation:
 </li>
 <ul>
 <li>
 Submarine pipelines
 </li>
 <li>
 Risers
 </li>
 <li>
 Spools
 </li>
 <li>
 PLETS and manifolds
 </li>
 <li>
 Cables
 
 </li>
 </ul>
 </ul>
 Reports to:
 
 
 Functional: Discipline Lead Engineer
 
 
 Liaise With: All Engineering disciplines, Fabrication Group, Safety Dept, Document Control, Procurement Group, Project
 
 
 Management Team, Subcontractors and Vendors, and Customers.
 
 
 Supervises: Engineers
 
 
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education:
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Naval Architecture, Civil / Structural / Mechanical Engineering (Master&rsquo;s degree preferred)
 </li>
 <li>
 8-15 years of experience in oil and gas with a major contractor or consultant predominantly performing construction and installation design
 </li>
 <li>
 Strong working knowledge of many design techniques and analysis methods, and detailed knowledge of the content and application of standards codes and guidelines as applicable for onshore and offshore construction
 </li>
 <li>
 Preferably Registered Professional Engineer or member of a professional engineering society
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
 For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
 
 
</div>

Senior Construction Support Engineer

<div>
 
 Job Description
 
 
 
 
 Job Overview:
 
 
 
 Sr. Hook-up Engineer will typically be leading the respective discipline and supporting to Hook-up lead &amp; Hook-up Manager in delivering construction &amp; completion campaign during hook-up phase to execute overall project in successful and timely manner. The Sr. Hook Up Engineer solves complex problems and uses discipline-specific knowledge to improve their products or services.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities:
 
 
 
 <ul>
 <li>
 Prepare &amp; review Hook Up job cards as appropriate including pre-requisites and focusing sequential installations and relevant completion activities
 </li>
 <li>
 Develop the WBS for discipline scope
 </li>
 <li>
 Review construction work packs for respective discipline and ensure compliance to project requirement
 </li>
 <li>
 Prepare the hook-up schedule for discipline specific activities with efficient sequencing and synchronizing with other disciplines
 </li>
 <li>
 Participate in Pre-engineering survey, pre-construction survey &amp; post installation survey
 </li>
 <li>
 Develop the constructability log &amp; monitor the closing of actions on weekly basis
 </li>
 <li>
 Review design MTO&rsquo;s for discipline
 </li>
 <li>
 Verify the MTO for offshore contingencies
 </li>
 <li>
 Review the material requisitions in compliance with project specifications prior to order Coordinate deliveries of same on site (yard/port/offshore/any other onshore locations)
 </li>
 <li>
 Review hook-up progress register and confirm understanding on progressing methodology Ensure progress register is in line with hook-up job cards for respective discipline
 </li>
 <li>
 Liaise with warehouse team to ensure project material receiving status &amp; inspection clearance from Quality
 </li>
 <li>
 Liaise with fabrication team and take handover of fabricated project material and other ship lose material
 </li>
 <li>
 Liaise with Hook-up material team and verify the material bag/tag as per project requirement &amp; as per hook-up Job cards
 </li>
 <li>
 Develop and implement detailed hook-up plans, , and strategies for onshore and offshore projects
 </li>
 <li>
 Provide technical guidance and support to junior engineers, ensuring their adherence to project timelines and quality standards
 </li>
 <li>
 Collaborate with project management and procurement teams to ensure timely availability of necessary resources, materials, and equipment
 </li>
 <li>
 Conduct risk assessments and implement mitigation measures to ensure safety during hook-up operations
 </li>
 <li>
 Ensure compliance with project requirements, industry codes, and standards, including the integration of environmental and sustainability aspects
 </li>
 <li>
 Ensure daily progress monitoring &amp; reporting to planner
 </li>
 <li>
 Liaise with commissioning team and understand systems priorities, ensure construction is planned accordingly
 </li>
 <li>
 Ensure the support with commissioning team to expedite the vendor related activities
 </li>
 <li>
 Ensure scope familiarization with Hook-up superintendent &amp; offshore construction crew prior to offshore mobilization
 </li>
 <li>
 Travel to offshore sites and to onshore yard facilities (dynamic environment) for co-ordination &amp; resolution of disciplinary interfaces
 </li>
 <li>
 Participate in Toolbox Talks (TBT), Ensure Permit-To-Work (PTW) requirements are fulfilled before commencing each site activities and being compliant with the Company&rsquo;s QHSES policies
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education:
 
 
 
 <ul>
 <li>
 Bachelor's degree in Engineering (preferably in Mechanical, Electrical, or Chemical discipline) or equivalent industry experience
 </li>
 <li>
 10+ years&rsquo; experience in related offshore engineering fields
 </li>
 <li>
 Strong knowledge of industry best practices, standards (API, ISO), and regulations related to hook-up activities
 </li>
 <li>
 Proficiency in utilizing project management tools and software for planning, scheduling, and tracking hook-up and commissioning activities
 </li>
 <li>
 Excellent communication and leadership skills to effectively liaise with interdisciplinary teams, stakeholders, and clients
 </li>
 <li>
 Demonstrated ability to resolve technical challenges, implement innovative solutions, and ensure continuous improvement
 </li>
 <li>
 Proactive mindset with a strong focus on safety, quality, and delivering projects within defined timelines and budget constraints
 </li>
 <li>
 Competent in analyzing technical documents, drawings, and specifications to identify discrepancies and propose corrective actions
 </li>
 <li>
 Strong decision-making abilities under pressure, with the ability to prioritize tasks and allocate resources efficiently
 </li>
 <li>
 Professional certifications (such as PMI or equivalent) or training in project management would be an advantage
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
 For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
 
 
</div>

Senior Hook Up Engineer (E&I)

<div>
 
 Job Description
 
 
 
 
 Job Overview:
 
 
 
 The Principal Structural Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex structural-related problems and will work independently with minimal guidance. The Principal Structural Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of structural engineering. As such, they must have in-depth expertise in structural engineering as well as broad knowledge of the structural discipline within the engineering function.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities:
 
 
 
 <ul>
 <li>
 Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards
 </li>
 <li>
 Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations
 </li>
 <li>
 Prepare clear and accurate detailed design calculations and analyses including design reports and - procedures
 </li>
 <li>
 Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements
 </li>
 <li>
 Clearly communicate and explain difficult concepts and persuade others to adopt a point of view
 </li>
 <li>
 When acting as Lead Engineer, in addition:
 </li>
 <ul>
 <li>
 Direct medium or large Engineering team as a Lead Engineer
 </li>
 <li>
 Lead the Discipline engineering design of the assigned work area and complete it within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard
 </li>
 <li>
 Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline Manager
 </li>
 <li>
 Ensure interfaces and deliverables are clearly identified
 </li>
 <li>
 Maintain responsibility for progress and productivity, identifying any required corrective action
 </li>
 <li>
 Act as project representative for the Discipline during meetings with Project Team,
 </li>
 <li>
 Customer discipline lead and relevant agencies such as certifying authorities, auditors, third parties, etc.
 </li>
 </ul>
 <li>
 Train/mentor other employees in the department
 </li>
 <li>
 Assist and monitor MOPEX offices on projects
 </li>
 <li>
 Has a good understanding of the other engineering departments
 </li>
 <li>
 Initiate interface with other disciplines to obtain input for discipline designs
 </li>
 <li>
 Has a good understanding of construction/fabrication yard and client requirements
 </li>
 <li>
 Has commercial insight
 </li>
 <li>
 Helps to maintain unifi
 </li>
 <li>
 Prepare bid from sketching data, using experience
 </li>
 <li>
 Supervise engineers and designers
 </li>
 <li>
 Define scopes of work for engineering/construction fabrication yard
 </li>
 <li>
 Provide engineering support as required
 </li>
 <li>
 Perform engineering checks of drafting
 </li>
 <li>
 Perform engineering checks prepared by others within the discipline
 </li>
 <li>
 Perform design verification through single discipline check and assist with inter-discipline checks (IDC)
 </li>
 <li>
 Prepare MTOs of structures
 </li>
 <li>
 Prepare specifications
 </li>
 <li>
 Prepare subcontract
 </li>
 <li>
 Review of vendor data
 </li>
 <li>
 Prepare technical bid evaluations
 </li>
 <li>
 Assist in furthering the department
 </li>
 <li>
 Tasks as Engineering Specialist:
 </li>
 <ul>
 <li>
 Coordinate and check the work of senior and junior engineers
 </li>
 <li>
 Conduct peer reviews on request
 </li>
 <li>
 Provide technical assistance where required
 </li>
 <li>
 Prepare structural analyses and reports on calculations or perform specialist tasks (i.e., architectural designs, underground piping designs, complex structures, topsides, jackets, weight control reports, the center of gravity reports)
 </li>
 <li>
 Is specialized in several fields (geotechnical, steel, concrete, dynamic calculations, FEM, fatigue calculations, earthquake, jackets, FPSOs, blast, hydrodynamics, architectural, &hellip;)
 </li>
 <li>
 Is specialized in several design codes (EC, ACI/AISC/API, GOST, &hellip;)
 </li>
 <li>
 Check designs for operational requirements, constructability, and maintainability
 </li>
 <li>
 Prepare project engineering guides
 </li>
 </ul>
 <li>
 Tasks as Lead Engineer:
 </li>
 <ul>
 <li>
 Work as Lead Engineer on medium to large-size EPC projects
 </li>
 <li>
 Responsible for all engineering and design work on any project
 </li>
 <li>
 Has full control and manages work hours, materials, progress
 </li>
 <li>
 Work in close liaison with the Design Coordinator
 </li>
 <li>
 Set up all engineering computer systems
 </li>
 <li>
 Assist Project Manager in:
 </li>
 <ul>
 <li>
 Preparing deliverable control
 </li>
 <li>
 Preparing schedule
 </li>
 <li>
 Preparing progress reports
 </li>
 <li>
 Preparing man-hour and capital expenditure estimates
 </li>
 </ul>
 </ul>
 <li>
 Coordinate with project management
 </li>
 <li>
 Train personnel under their supervision
 </li>
 <li>
 Is responsible for discipline within the engineering group
 </li>
 <li>
 Manage (design) subcontracts
 </li>
 <li>
 Identify and manage changes in the scope of work
 </li>
 <li>
 Is responsible for filing of engineering work
 </li>
 <li>
 Give relevant feedback to the department
 
 
 </li>
 </ul>
 Reports to:
 
 
 Project: Lead Engineer, Project Engineering Manager, or Project Manager
 
 
 Functional: Supervising Department Manager
 
 
 Liaise with: All Engineering disciplines, Construction site/Fabrication Group, Safety Dept, Project Management Team,
 
 
 Document Control, Project Planner, Project Cost Controller, QC and Certification Group, Procurement Group, Subcontractors
 
 
 and Vendors, and Customers
 
 
 Supervises: Senior Engineers, Engineers and Designers
 
 
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education:
 
 
 
 <ul>
 <li>
 Bachelor's Degree or Master's Degree in engineering
 </li>
 <li>
 15-20 years of experience in oil and gas with a major contractor or consultants predominantly performing detail design
 </li>
 <li>
 Preferably Registered Professional Engineer or member of professional engineering society as applicable
 </li>
 <li>
 Seasoned structural knowledge
 </li>
 <li>
 Very good organizer, motivator, and supervisor
 </li>
 <li>
 Able to solve problems without assistance
 </li>
 <li>
 Keen on improving the effectiveness of the work
 </li>
 <li>
 HSE, TQM and cost-conscious
 </li>
 <li>
 Fluent in English, both oral and written
 </li>
 <li>
 Understanding and supporting company goals and work processes
 </li>
 <li>
 Show flexibility and ensure proper hand-over with regards to:
 </li>
 <li>
 The reassignment to other departments/construction sites/fabrication yards
 </li>
 <li>
 The reassignment to other McDermott offices
 </li>
 <li>
 The replacement of colleagues during illness and holidays
 </li>
 <li>
 The provision of assistance to other colleagues with heavy workloads (also other projects) when possible/desirable
 </li>
 <li>
 The managing/learning of future current working methods and software applications
 </li>
 <li>
 Detailed knowledge of design techniques and analysis methods, and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable
 </li>
 <li>
 Knowledgeable in project coordination and execution skills
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
 For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
 
 
</div>

Principal Structural Engineer

<div>
 
 Job Description
 
 
 
 
 Job Overview:
 
 
 
 The Associate Structural Engineer is responsible for utilizing existing Structural (Eng) procedures to solve routine or standard problems. They receive instruction, guidance, and direction from others within the team, and they will leverage their conceptual knowledge of theories, practices, and procedures related to Structural (Eng) and Engineering.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities:
 
 
 
 <ul>
 <li>
 Perform detailed design engineering, analysis, and calculations on basic engineering tasks
 </li>
 <li>
 Apply knowledge and skills to complete routine assignments under close supervision and mentoring
 </li>
 <li>
 Prepare clear and accurate detailed design calculations and analyses including design reports and procedures
 </li>
 <li>
 Organize own work to meet deadlines set by others
 </li>
 <li>
 Clearly communicate information, asking questions and checking for understanding
 </li>
 <li>
 Gain an understanding of the project scope of work, specifications, schedule, and all inter-discipline requirements
 </li>
 <li>
 Perform computer analysis of structures designed by others with guidance from Senior and PPL engineers
 </li>
 <li>
 Prepare design calculations as required
 </li>
 <li>
 Perform engineering checks of drafting
 </li>
 <li>
 Use of specifications when performing design calculations
 </li>
 <li>
 Prepare MTOs of primary structures under supervision
 </li>
 <li>
 Provide engineering support as required
 </li>
 <li>
 Assist in the preparation of subcontract documents
 </li>
 <li>
 Review vendor data with guidance from colleagues
 
 
 </li>
 </ul>
 Reports to: Project: Lead Engineer
 
 
 Functional: Supervising Department Manager
 
 
 Liaises with: Engineers, Design Supervisor, and Designers of their own discipline
 
 
 Supervises:
 
 
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education:
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s Degree or master's degree in engineering
 </li>
 <li>
 0-3 years of experience in the oil and gas industry
 </li>
 <li>
 Preferably Registered Engineer in Training (EIT) or member of professional engineering society as applicable
 </li>
 <li>
 Eager to learn
 </li>
 <li>
 Working knowledge of English, both oral and written
 </li>
 <li>
 Learn the content and application of standards, codes, and guidelines as applicable
 </li>
 <li>
 Learn design techniques and analysis methods
 </li>
 <li>
 HSE, TQM and cost-conscious
 </li>
 <li>
 Show flexibility and ensure proper hand-over with regards to:
 </li>
 <li>
 The reassignment to other departments, construction sites, and fabrication yards
 </li>
 <li>
 The replacement of colleagues during illness and holidays
 </li>
 <li>
 The provision of assistance to other colleagues with heavy workloads (also other projects) when possible and desirable
 </li>
 <li>
 The managing or learning of future current working methods and software applications
 </li>
 <li>
 Accredited engineering degree as may be required by specific regions
 </li>
 <li>
 Familiar with the use of codes and standards
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
 For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
 
 
</div>

Associate Structural Engineer

<div>
 
 Job Description
 
 
 
 
 Job Overview:
 
 
 
 The Associate Production Engineer is responsible for utilizing existing production procedures to solve routine or standard problems. They receive instruction, guidance, and direction from others within the team and will leverage their conceptual knowledge of theories, practices, and procedures related to production and Fabrication.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities:
 
 
 
 <ul>
 <li>
 Develop design ideas based on customer interests, budgets, and market research
 </li>
 <li>
 Meet with the development team to discuss product ideas
 </li>
 <li>
 Analyze the market and industry product trends
 </li>
 <li>
 Create rough product designs using sketches and computer software
 </li>
 <li>
 Conduct theoretical testing on design models
 </li>
 <li>
 Create full product designs and specifications using computer software modeling techniques
 </li>
 <li>
 Select product materials and design the product manufacturing process
 </li>
 <li>
 Oversee assembly and ensure that products conform to market specifications and safety regulations
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education:
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Mechanical Engineering or a similar field is preferred
 </li>
 <li>
 Minimum 3 years of work experience as a Product Engineer or similar role
 </li>
 <li>
 Advanced analytical and design skills
 </li>
 <li>
 Excellent written and verbal communication skills
 </li>
 <li>
 Knowledge of industry and market trends
 </li>
 <li>
 Relevant training and/or certifications as a Product Engineer
 
 
 </li>
 </ul>
</div>

Associate Production Engineer

Join McDermott International, Ltd and explore 7   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.