Abrar Admin

Nemco Food Equipment

<div>Description:

Nemco Food Equipment is committed to the manufacturing and on-time delivery of these piece parts to the assembly operations with a very experienced staff of fabricators who can operate a variety of work centers able to fabricate sheet steel into complex parts. In this job, you will work in a production environment, working with resistance welding and pem stud equipment. After an initial training period, productivity and quality requirements must be met. Durations of set-ups and run times will vary. Tasks require a moderate degree of eye-hand coordination, manual dexterity, and the use of both hands and arms on a repetitive basis for a full range of motion. 
 
The responsibilities of this position include, but are not limited to, the following: 
 
Setup and operation of resistance welder.
Setup and operation of pem stud equipment. 
Identifying need for weld tip conditioning or having the ability to condition weld tips. 
 
If this job is as one of interest to you, at a minimum, you must have, or the initiative to learn, the following: 
 
Ability to set up and operate metal finishing machinery. 
Ability to read blueprints and to follow specific written instructions and procedures. 
Ability to keep workspace clean and organized. 
Work Schedule:<ul><li>
Monday- Thursday (5:00am - 3:30pm; 10 hour shift) Subject to Change</li><li>
Occasional overtime is required</li></ul>
Relevant Work Experience: 
Previous experience in a manufacturing environment is preferred. 
Requirements:

PHYSICAL REQUIREMENTS 
Standing: Most tasks are performed in a standing position with intermittent walking. 
Lifting: Frequently lifting items weighing 5 lbs. to 10 lbs.; occasionally lifting items weighing up to 50 lbs. 
Walking: Frequent walking short distances (less than 1/8 mile). 
Carrying: Occasional carrying of bulky items weighing up to 50 lbs. short distances. 
Pushing: Use of manual hand truck and carts to occasionally move skids or parts short distances. 
Pulling: Use of manual hand truck and carts to occasionally move skids or parts short distances. 
Bending: Occasional bending required to perform a variety of tasks. 
Reaching: Frequent reaching to load and unload parts from fixture in machine, tubs, carts, or pallets. 
Handling: Frequent handling of parts ranging in weight from 5 lbs. to 10 lbs.
Gripping: Frequent gripping of parts while deburring.</div>

Spot Welder

Join Nemco Food Equipment and explore 1   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

Nemco Food Equipment

About Company

Spot Welder