Qureos Mentor

Neproplast

<div>
 
 
 About NeproPlast
 
 :
 
 
 NeproPlast is a fast-growing plastic manufacturing company based in Jeddah, dedicated to producing high-quality products for various industries. We are currently looking for a motivated and detail-oriented
 
 Entry-Level QC Inspector
 
 to join our dynamic team and support our commitment to quality and excellence.
 
 
 
 
 
 
 Job General Objectives:
 
 Control of production quality during his period (shift).
 
 
 
 
 
 
 Job Responsibilities
 
 :
 
 <ul>
 <li>
 Conduct routine inspection and tests according to SOP and QC inspection and test plan.
 </li>
 <li>
 Prepares quality inspection reports.
 </li>
 <li>
 Ensures fast and accurate feedback of test results to production department.
 </li>
 <li>
 Maintain good working condition of test equipment, tools and measuring instruments.
 </li>
 <li>
 Ensure that the calibration of measuring and test equipment he is using is up to date.
 </li>
 <li>
 Maintain housekeeping and cleanliness of his working area.
 </li>
 <li>
 Perform similar or related works as instructed by his immediate superior.
 </li>
 <li>
 Carry out similar or related works as directed by his direct superior.
 </li>
 <li>
 Assist in inspecting raw materials, in-process products, and finished goods to ensure they meet quality standards.
 </li>
 <li>
 Conduct simple quality control tests and measurements using basic testing tools and equipment.
 </li>
 <li>
 Document inspection results and report any defects or issues to the senior QC team.
 </li>
 <li>
 Support the production team in ensuring the quality of products during the manufacturing process.
 </li>
 <li>
 Learn and apply quality control techniques and procedures under the guidance of experienced team members.
 </li>
 <li>
 Maintain a clean and organized work area and ensure compliance with health and safety regulations.
 </li>
 <li>
 Participate in basic training on quality standards, manufacturing processes, and safety protocols.
 </li>
 </ul>
 
 
 
 
 
 Required Skills, Personal Qualities and Training:
 
 
 <ul>
 <li>
 Observance of cleanliness in his work.
 </li>
 <li>
 A calm and patient manner.
 </li>
 <li>
 Ability to communicate effectively at all levels.
 </li>
 <li>
 Ability to read, write and count.
 </li>
 <li>
 Ability to work as part of a team.
 </li>
 <li>
 Ability to work under pressure.
 </li>
 <li>
 Attendance Punctuality.
 </li>
 <li>
 Eliminating waste.
 </li>
 <li>
 First Aid, Fire Fighting, Emergency &amp; Evacuation Skills.
 </li>
 <li>
 Good appearance and follow the company required uniform.
 </li>
 <li>
 Speed and accuracy in performing his work.
 </li>
 <li>
 He has the knowledge of the job tasks requirements.
 </li>
 </ul>
 
 
 
 
 
 Qualifications
 
 :
 
 <ul>
 <li>
 High school diploma or equivalent; technical or vocational certification in manufacturing or quality control is a plus.
 </li>
 <li>
 Priority for selection will be for
 
 Saudi Nationals.
 
 </li>
 <li>
 No prior experience required, but an interest in quality control and manufacturing processes is preferred.
 </li>
 <li>
 Strong attention to detail and willingness to learn.
 </li>
 <li>
 Ability to follow instructions and work well as part of a team.
 </li>
 <li>
 Basic math and measurement skills.
 </li>
 <li>
 Good communication skills.
 </li>
 <li>
 Ability to adapt to a fast-paced work environment.
 </li>
 </ul>
 
 
 
 
 
 Preferred Skills
 
 :
 
 <ul>
 <li>
 Basic understanding of quality control processes or manufacturing operations (training will be provided).
 </li>
 <li>
 Familiarity with common inspection tools and safety equipment is a plus.
 </li>
 </ul>
 
 
 
 
 
 Benefits
 
 :
 
 <ul>
 <li>
 Competitive salary and benefits package.
 </li>
 <li>
 Full training and development opportunities to grow your career in quality control and manufacturing.
 </li>
 <li>
 Friendly and supportive work environment.
 </li>
 </ul>
 
 
</div>

Quality Control Inspector

<div>
 
 
 Job General Objectives:
 
 
 
 Assists Production Supervisor and operators in set up, normalization, troubleshooting and optimization of all machine processes with the ultimate goal of reducing scrap, improving machine output performance and reducing tool change times. Maintains and secures controlled extrusion &amp; injection process by using item weights, checking and optimizing current running process.
 
 
 
 
 
 
 Tasks and Duties:
 
 
 <ul>
 <li>
 Performing line readings and equipment walk downs to ensure extrusion parameters are maintained, quality issues are identified and solutions are implemented.
 </li>
 <li>
 Performing visual inspection of finished products to identify conditional or mechanical issues with the equipment. If issues are found, notify the appropriate resource or make appropriate adjustments to ensure a correction is made.
 </li>
 <li>
 Identifies process improvements and areas for reduction in waste and increased throughput.
 </li>
 <li>
 Improves and optimizes product changeover using quick tool change techniques.
 </li>
 <li>
 Determines Maximum production rates and ensures maximum production rates are applied as per Production Data Sheet (PDS), while maintaining quality standards.
 </li>
 <li>
 Follows documentation practices &amp; completes all reports and paperwork as required.
 </li>
 <li>
 Verifies that basic maintenance duties on extrusion machines and ancillary equipment as specified within the planned maintenance guidelines are completed. Supports and monitors adherence to TPM &amp; 5S programs.
 </li>
 <li>
 Supports and assists implementation of Lean manufacturing principles.
 </li>
 <li>
 Re-enforces consistent and accurate data recording and logging of changes in process- and production parameters.
 </li>
 <li>
 Ensuring any systems implemented in the section are fully supported taking personal ownership of the process, procedure or system.
 </li>
 <li>
 Displays a methodical approach to problems solving and root cause analysis to identify process, machine or work area improvements that optimize productivity.
 </li>
 <li>
 Maintains a clean, safe and organized work environment.
 </li>
 <li>
 Conducts operations to ISO and OHSAS standards and assists with updating procedures and work instructions to reflect current production and process status.
 </li>
 <li>
 Works with the Quality department to investigate customer concerns and develops and implements corrective solutions.
 </li>
 <li>
 Assists in the ongoing development of Production Operators to industry standards.
 </li>
 <li>
 Communicate positional and line performance issues to the production supervisor.
 </li>
 </ul>
 
 
 
 
 
 Required Skills, Personal Qualities and Training:
 
 
 <ul>
 <li>
 A strong knowledge of PVC and CPVC Extrusion processes and equipment.
 </li>
 <li>
 Minimum five years of experience in an extrusion operator or process optimization role, gained in a modern, lean manufacturing plastics environment.
 </li>
 <li>
 Must have experience setting up, troubleshooting PVC and CPVC pipe extrusion process &amp; lines.
 </li>
 <li>
 Hands-on experience in plastic extrusion process optimization and machine/tooling commissioning.
 </li>
 <li>
 Ability to deliver Health and Safety control with-in a structured system like OHSAS 18001.
 </li>
 <li>
 Proven background of driving continuous improvement within an ISO 9001 production environment.
 </li>
 <li>
 Experience with preventative maintenance programs (TPM).
 </li>
 <li>
 Project and trial coordination skills.
 </li>
 <li>
 Strong verbal and written communication skills, with proficiency in English language.
 </li>
 <li>
 Excellent interpersonal and motivational skills to maintain strong employee relations in a multi-cultural environment.
 </li>
 <li>
 Excellent analytical and problem-solving skills.
 </li>
 <li>
 Improvement implementation through established methodologies such as lean manufacturing, total quality practices and six sigma.
 </li>
 <li>
 Operates with high level of attention to detail, is organized, methodical and provides accurate documentation.
 </li>
 <li>
 High degree of ERP and computer literacy, with proficiency in using Microsoft Office programs.
 </li>
 <li>
 Able to work under pressure and demonstrate good time management.
 </li>
 </ul>
 
 
 
 
 
 Required Qualifications &amp; Experience:
 
 
 <ul>
 <li>
 Associate Diploma in Plastic technology manufacturing or High school required. Technical Degree in a scientific discipline preferred. Candidates with Diploma degree will have priority of course.
 </li>
 <li>
 Minimum 3 years of related experience is required.
 </li>
 <li>
 Priority in selection is for
 
 Saudi Nationals
 
 .
 </li>
 </ul>
</div>

Production Technician

Join Neproplast and explore 2   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

Neproplast

ABOUT_COMPANY

Quality Control Inspector

Production Technician