Qureos Mentor

North Oil Company Qatar

<div>
 Job description:
 
 
 Job Purpose
 
 Ensure safe delivery of core business through active management of Base Operations routines and core operational activities while also integrating the execution of Campaign and Project activities, ensuring compliance with maintenance performance targets and SECE driven work adhering to performance standards
 
 
 
 SITUATION IN ORGANIZATION
 
 
 
 Position N+1:: Offshore Installation Manager
 
 
 Position N+2: Offshore Area Manager&nbsp;
 
 
 Supervised Team size (24): C&amp;I Supervisor, Electrical Supervisor, Mechanical Supervisor, Services Supervisor, FST Supervisors (Maint)
 
 
 
 CONTEXT AND ENVIRONMENT
 
 
 
 The Maintenance Superintendent supports the OIM in all matters related to managing the day to day priorities and ensuring safe delivery of maintenance and asset integrity. C1 Controlled Site E is located approximately 80km NE of Qatar in the Arabian Gulf in an offshore environment with imposing limitations to work delivery. The position is offshore based &ndash; on a rotational scheme
 
 Key Accountabilities
 
 
 ACCOUNTABILITIES
 
 
 
 &nbsp;&middot; &nbsp; &nbsp;Leading a team of over 100 offshore personnel in the safe delivery of over 56k bopd production volumes and other short to mid-term business priorities
 
 &middot; &nbsp; &nbsp;Contributing to the development and review of all risk assessments to ensure that hazards have been identified, adequate mitigations are in place and risk has been reduced to ALARP
 
 &middot; &nbsp; &nbsp;Delivering safe and efficient operations by effectively managing the competing priorities of maintenance
 
 
 &nbsp;
 
 
 
 ACTIVITIES
 
 
 <ul>
 <li>
 Provide the OIM with analysis and comment on performance, opportunities and risks in order to improve business performance and reduce risk related to Maintenance and HSEQ items.
 </li>
 <li>
 Provide support to teams to ensure production targets are met and production / reinjection volumes are maximized in line with the Production Superintendent
 </li>
 <li>
 Assure that planned maintenance, inspections, campaigns, projects and workovers are carried out in accordance with company requirements to ensure asset integrity and production optimization
 </li>
 <li>
 Motivate and inspire staff in the execution of their responsibilities to drive a performance culture and encourage innovative thinking around process safety and production optimization related to maintenance outages
 </li>
 <li>
 Coach and develop operational staff competencies in troubleshooting of equipment and root cause analysis
 </li>
 <li>
 Perform internal audits of risk management systems to drive compliance and continuous improvements
 </li>
 <li>
 Support the OIM in the implementation of relevant company policies, standards and processes to ensure employee safety and comply with legislative requirements
 </li>
 <li>
 Represent NOC appropriately and in accordance with code of ethics when interfacing with internal and external stakeholders
 </li>
 <li>
 Promote cost consciousness across entire network of stakeholders in order to embed a strong cost culture
 </li>
 </ul>
 Key Accountabilities Key Accountabilities Competencies Delegate Appropriately and Communicate Effectively Demonstrate Adaptability in Managing Complex Situations Demonstrate Learning Agility and Drive Innovation Develop Emotional Intelligence and Cultural Competence Develop Others and Institutionalise Knowledge Develop Talent for the Future NOC Sustainability Facilitate Collaboration and Sense of Community Improve Safety, Technical Proficiency and Results Lead By Example with NOC Values Set Purpose, Strategic Direction and Company Plan Strengthen Accountability and Continuous Improvement Think and Act in Stakeholder-Centric Ways Education
 <ul>
 <li>
 Bachelors of Science in any Engineering field or equivalent&nbsp;
 </li>
 </ul>
 Certification
 <ul>
 <li>
 Offshore Emergency Response Team Leader
 </li>
 <li>
 Management of Major Emergencies
 </li>
 <li>
 Advanced First Aid &bull; Basic and Advanced Firefighting
 </li>
 <li>
 Oil Spill Principles and Management Level 1
 </li>
 <li>
 Basic and Advanced Cause Tree Analysis
 </li>
 </ul>
 Experience
 <ul>
 <li>
 Industry Experience: Minimum 10 years&rsquo; experience in O&amp;G production operations
 </li>
 <li>
 Supervisory Experience: Minimum 5 years&rsquo; experience leading others (Discipline Supv. or Equivalent)
 </li>
 <li>
 Management of Emergencies / Crisis Situations: Minimum 5 years&rsquo; experience in this role
 </li>
 </ul>
</div>

Maintenance Superintendent

<div>
 Job description:
 
 
 
 JOB DIMENSIONS
 
 
 &nbsp;
 
 <ul>
 <li>
 Key role in short term maintenance preparation and support for execution, collaborating and driving integration on a daily basis with a wide / diverse range of Leadership stakeholders, in line with 4 months, 5 weeks planning.
 </li>
 <li>
 Administrate all Instrument &amp; Metering stocks as Technical Administrator (TADM) for the INS Lab office administering the equipment stock for a value of 25M$.
 </li>
 <li>
 Position is responsible for ~ 7 contracts within the M&amp;I Electrical &amp; Instrumentation Department for a value of 6M$/year
 </li>
 <li>
 Provide input to Head of Electrical &amp; Instrumentation into the development of annual operational and capital budgets.
 </li>
 <li>
 Responsible for approving SAP work orders on a daily basis with values up to $50k as per Delegation of Authority (DOA).
 </li>
 <li>
 Position has interactions with external stakeholders (Qatar Petroleum / Contractor Management).
 </li>
 </ul>
 
 &nbsp;
 
 
 &nbsp;
 
 
 CONTEXT AND ENVIRONMENT
 
 
 &nbsp;
 
 
 Position is in a Joint Venture Operating Company on the Al Shaheen oil and gas field, one of the largest offshore oil and gas fields in the world. The role is onshore based in Doha, Qatar and is a permanent staff position on a residential basis (5 day working week). Role will require regular offshore trips together with visits to contractor offices and facilities.
 
 
 ACTIVITIES
 
 
 &nbsp;
 
 <ul>
 <li>
 Drive an Incident Free environment through establishing and maintaining a strong safety culture
 </li>
 <li>
 Responsible for ensuring positive HSE performance by personnel, contractors and others working under the guidance of the Maintenance Team Lead Instrumentation and Metering.
 </li>
 <li>
 Ensuring compliance with HSE legislation, company standards and procedures under the area of responsibility to ensure employee safety, legislative compliance and responsible environmental attitude.
 </li>
 <li>
 Lead cross discipline maintenance Engineers &amp; coordinators to provide robust PPM and CM data to support safe and efficient preparation, planning, execution and close out of base operations, campaign and shutdown maintenance activities.
 </li>
 <li>
 Lead and provide first level specialist technical advice and guidance to site/offshore personnel on the maintenance of plant/equipment troubleshooting, root cause analysis and investigations where required involving maintenance Engineers and coordinators.
 </li>
 <li>
 Provide Instrumentation &amp; Metering technical and administrative support to the site base operations; preparation of scopes of work for short term interventions, organization of vendors, supply direct support to site requests (vendors, spare parts, tooling, technical procedures, work packs and work order resourcing.
 </li>
 <li>
 Provide Instrumentation &amp; Metering technical and administrative support to campaign and shutdown teams to ensure the overall readiness and execution of scopes in line with campaign shutdown gate criteria process. Work order resourcing.
 </li>
 <li>
 Perform risk analysis on deferrals raised on Safety and environmental critical elements under Instrumentation and metering equipment.
 </li>
 <li>
 Accountable for the non routine maintenance expenses executed in his/her Maintenance discipline
 </li>
 <li>
 Accountable for the spare parts stock value in his/her Maintenance discipline
 </li>
 <li>
 Develop scope of intervention for major preventive and on difficult corrective Maintenance
 </li>
 <li>
 Review and challenge design of brown field modification and greenfield project in term of maintainability.
 </li>
 <li>
 Responsible for defining the technical information required to create, update, block and delete references stored under its technical authority (in particular the General Specifications and QA / QC requirements), in close collaboration with the Stock Controller , specifically replenishment parameters. (MRP Type and MRP parameters).
 </li>
 <li>
 Ensure daily communication with NOC-OC T1/T2 and provide support where required on technical/administrative issues. Attend daily video conference call with offshore OTL&rsquo;s and discipline supervisors.
 </li>
 <li>
 Visit offshore sites on regular basis to enhance collaboration and promote the understanding of goals to ensure information flow is maintained efficiently.
 </li>
 <li>
 Manage the repair process for critical Instrument &amp; Metering equipment, including visits to local vendor workshops and warehouses.
 </li>
 <li>
 Provide leadership and coaching to all direct reports in the execution of their responsibilities.
 </li>
 </ul>
 <ul>
 <li>
 Ensure 4 months and 5 weeks planning are optimized, liaise with planning department and attend weekly IOP meetings to ensure gate criteria are achieved. (spares, vendor mobilizations, tooling, shipment, PR&rsquo;s)
 </li>
 <li>
 Proactive management of all safety and business critical backlog.
 </li>
 <li>
 Monitor the efficiency of the maintenance strategies for the maintenance, inspection and operation of plant/equipment
 </li>
 <li>
 Participate, as appropriate, in vendor/contractual audits.
 </li>
 <li>
 Execution of class 2 modifications (vendor based modifications).
 </li>
 <li>
 According to inspection instructions, manage the ESDV assurance testing.
 </li>
 <li>
 Take leading role in management of repairs, overhaul and maintenance of all Instrument &amp; Metering equipment. Drive through weekly inter departmental meetings.
 </li>
 <li>
 Ensure all certificates on installed equipment (Instrument &amp; Metering) produced during visits are stored in EDMS.
 </li>
 <li>
 Ensure all certificates on spare parts scheduled to be used offshore (before stock shipment to offshore) are recorded in EDMS (by logistics) &ndash; as required.
 </li>
 <li>
 Ensure that new Spare Parts are referenced and attached to their equipment through the BOM in PALM
 </li>
 <li>
 Organize the team to verify compliance of technical specification and QA/QC requirement, management of non-conformity and associated dispute with the support of buyer in charge of order
 </li>
 <li>
 Ensure all direct reports set objectives for themselves; manage the performance of direct reports and provide regular feedback and give guidance on improvements where necessary. Ensure proper target setting and staff performance appraisals against assigned targets in line with NOC performance management guideline.
 </li>
 <li>
 Support the drive for Qatarisation
 </li>
 <li>
 Act as Head of Electrical and Instrumentation on an interim basis as and when required.
 </li>
 <li>
 Anticipate obsolescence, launch the needed upgrade engineering and stock replenishment
 </li>
 <li>
 Identify opportunities to improve efficiency of all activities, improve equipment reliability and reduce operating.
 </li>
 <li>
 Act as contract representative with ownership and cost management responsibility for key 3rd party operational support services.
 </li>
 <li>
 Contractor/vendor performance management.
 </li>
 <li>
 Share and adopt best practices across the company, support and identify opportunities to enhance consistency and alignment between assets, where practicably possible.
 </li>
 <li>
 All staff must be willing to participate in Crisis Response Training and to assist during Emergency Response Situations if required
 </li>
 </ul>
 Education
 
 B.Sc. / Engineering Degree or industry recognized technical qualifications supported by industry experience (offshore and onshore oil and gas facilities).
 
 Experience
 <ul>
 <li>
 Minimum of 10 years&rsquo; experience working in the oil and gas industry in a similar role with at least 3 years in supervisory roles.
 </li>
 <li>
 Strong leadership skills in a multi-cultural and highly technical specialized environment.
 </li>
 <li>
 Thorough understanding and application of industry process safety guidelines and procedures.
 </li>
 <li>
 Thorough knowledge of cross discipline maintenance requirements, Computerized Maintenance Management System (CMMS) and planning processes.
 </li>
 <li>
 Versatile, resilient and able to interact effectively with direct reports, peers and Senior Management on a daily basis.
 </li>
 <li>
 Excellent interpersonal skills with the ability to lead a large team.
 </li>
 <li>
 Excellent written and oral communication skills.
 </li>
 <li>
 Industry recognized training and professional certification.
 </li>
 </ul>
</div>

Lead, Instrumentation

<div>
 Job description:
 
 
 
 JOB DIMENSIONS
 
 
 &nbsp;
 
 <ul>
 <li>
 Provide Team Lead cover as and when required.
 
 Technical specialist in electrical &amp; HVAC discipline engineering.
 </li>
 <li>
 Technical evaluator for electrical &amp; HVAC equipment item spare part stock replenishment.
 </li>
 <li>
 Develop Request for Modifications in line with procedures, specifications and Company standards for electrical &amp; HVAC equipment items.
 </li>
 <li>
 Responsible for engineering, design and managing Class II modifications with cost conscious, fit for duty approach for electrical &amp; HVAC equipment.
 </li>
 <li>
 Position has interactions with external stakeholders (Contractor Management).
 </li>
 <li>
 Discipline focal for input to Class I modification projects executed by Engineering &amp; Construction
 </li>
 <li>
 Developer / Approver of repair strategy and methods associated with Electrical &amp; HVAC equipment.
 </li>
 <li>
 Interfaces with Project Engineers, Inspection Engineers, Mechanical/Instrumentation/ICSS Engineers, and 3rd-party contractors.
 </li>
 <li>
 Emphasis on technical leadership and mentorship
 </li>
 </ul>
 
 
 CONTEXT AND ENVIRONMENT
 
 
 &nbsp;
 
 <ul>
 <li>
 Position is in a Joint Venture Operating Company on the Al Shaheen oil and gas field, one of the largest offshore oil and gas fields in the world. The role is onshore based in Doha, Qatar and is a permanent staff position on a residential basis (5 day working week). Role will require regular offshore trips together with visits to contractor offices and facilities.
 </li>
 </ul>
 
 ACCOUNTABILITIES
 
 
 &nbsp;
 
 <ul>
 <li>
 Ensure highest safety and technical support in the assessment and recommendations for electrical and HVAC maintenance activities, issue procedures and technical support for its discipline
 </li>
 <li>
 Provide all aspects of electrical and HVAC equipment engineering/technical support and assistance to offshore team, NOC OC, Maintenance support and Shutdown/Campaign entity
 </li>
 <li>
 Responsible for the technical administration of all electrical &amp; HVAC spare parts for Field operation, from its creation to its refurbishment or end of life.
 </li>
 <li>
 Provide immediate support in close liaison with Tier 2 Maintenance Coordinator, Operations Centre Manager / personnel, Offshore stakeholders, Departmental Planners, Contracts and Procurement Department, Warehouse, Maintenance Department.
 </li>
 <li>
 Define and implement proactive/reactive maintenance strategies in support of the Lead Act as Technical Authority / Technical Administrator (TADM) for Electrical studies and projects.
 </li>
 </ul>
 
 &nbsp;
 
 
 ACTIVITIES
 
 
 &nbsp;
 
 <ul>
 <li>
 Drive an Incident Free environment / mindset within the team and with all colleagues
 </li>
 <li>
 Promote and implement usage of conditional based maintenance technique within the field of its ownership
 </li>
 <li>
 Review performance acceptable criteria for Safety and Environmental Critical Element under its ownership
 </li>
 <li>
 Perform risk analysis on deferral raised on Safety and Environmental Critical Element under its ownership
 
 Suggest action plan and cost estimate on failing Safety and Environmental Critical Element under its ownership
 </li>
 <li>
 Ensure that preventive Maintenance are well aligned with HSE requirement and equipment best reliability and availability
 </li>
 <li>
 Provide input to the team weekly reports, Unio tracker and KPI
 </li>
 <li>
 Provide technical support to FOPS and other NOC colleagues where required.
 </li>
 <li>
 Prepare technical reports and presentations for Head and senior management.
 </li>
 <li>
 Develop fit for duty maintenance solutions
 </li>
 <li>
 Supply accurate technical clarification on what spares should be purchased within own area of expertise
 </li>
 <li>
 Responsible for replenishment of spare parts stock under its assigned ownership
 </li>
 </ul>
 <ul>
 <li>
 Develop scope of intervention for major preventive and on difficult corrective Maintenance
 </li>
 <li>
 Review and challenge design of brown field modification and greenfield project in term of maintainability.
 </li>
 <li>
 Assist in the development of technical content of discipline maintenance operation to be performed by&nbsp;
 
 Develop scope of execution for minor modification done by Maintenance
 </li>
 <li>
 Review technical solution for major modification done by Engineering and Construction
 </li>
 <li>
 Identify critical situations which may expose NOC to safety or production concerns
 </li>
 <li>
 Analyze recurrent failure and issue solution to improve equipment reliability &amp; availability
 </li>
 <li>
 Coach more junior engineers within the team on their tasks
 </li>
 <li>
 Promote cost awareness and innovation within his/her workscopes
 </li>
 <li>
 Provide technical assistance for the definition of specialized service company
 </li>
 <li>
 Ensure that Discipline stock level are set at right level and replenishment are launch right on time
 </li>
 <li>
 Develop, with the TADM, the technical information required to create, update, block and delete references stored under its technical authority (in particular the General Specifications and QA / QC requirements), in close collaboration with the Stock Controller , specifically replenishment parameters. (MRP Type and MRP parameters).
 </li>
 <li>
 Responsible for new Spare Parts, ensuring they are referenced and attached to their equipment through the BOM in PALM
 </li>
 <li>
 Supply the TADM with the stock preservation operation to be carried out by logistics or specialized company for equipment under own area of expertise.
 </li>
 <li>
 Anticipate obsolescence, generate actionplan for mitigation and present to the Lead Engineer
 </li>
 <li>
 Identify opportunities to improve contractor/supplier contracts, reduce costs and improve the quality of services/products supplied.
 </li>
 <li>
 All staff must be willing to participate in Crisis Response Training and to assist during Emergency Response Situations if required.
 </li>
 </ul>
 Education
 <ul>
 <li>
 BSc in electrical engineering or equivalent
 </li>
 </ul>
 Experience
 <ul>
 <li>
 10 years experience on an oil &amp; gas field with at least 3 years at a senior technical support level and at least 3 years in electrical &amp; HVAC maintenance level
 </li>
 <li>
 Significant knowledge of offshore plant and equipment and maintenance systems
 </li>
 <li>
 Experience in a senior electrical engineering position demonstrating competency in the area of expertise
 </li>
 <li>
 Practical knowledge of maintenance and inspection management tools (SAP module PM &amp; MM)
 </li>
 <li>
 Medically fit to travel to offshore oil &amp; gas platform
 </li>
 <li>
 Results driven approach and attitude.
 </li>
 <li>
 Fluent in English (listening, writing and speaking) and its technical vocabulary.
 </li>
 <li>
 Industry recognized training and professional certification
 </li>
 <li>
 Strong analytical and diagnostic skills.
 </li>
 <li>
 Autonomous, proactive, and solution-oriented.
 </li>
 <li>
 Team player with leadership and mentoring capabilities.
 </li>
 <li>
 High safety mindset
 </li>
 </ul>
</div>

Senior Electrical Engineer

Join North Oil Company Qatar and explore 3   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

North Oil Company Qatar

About Company

Maintenance Superintendent

Lead, Instrumentation

Senior Electrical Engineer