Qureos Mentor

SAMTEC, INC

<div><p>Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec&rsquo;s global presence enables its unmatched customer service.</p><div><b><br>
Summary/Objective: </b>The Manufacturing Quality Engineer is responsible for improving the engineering, manufacturing, and quality of products. The primary focus is to address complex issues that affect product quality and/or customer satisfaction by developing and implementing systems and process changes required for improving overall quality performance and sustainable results.</div><div><b>
Essential Functions/Responsibilities:
</b></div><ul><li>Initiate projects related to product, process, quality systems, or yield improvement based on internal and external quality indicators.</li><li>
Develop and implement systems that improve quality and ensure sustainable results, therefore driving continuous improvement.</li><li>
Use advanced measurement tools, techniques, and test equipment and be able to understand and analyze results.</li><li>
Create and review qualification plans for inner company product transfers (Process Review, Test Plan Development, PCN, etc.)</li><li>
Serve as a training resource for above mentioned measurement and test equipment, ensuring respective personnel understand their operation.</li><li>
Provide guidance and training to Manufacturing Quality Support personnel in the respective area.</li><li>
Monitor and report daily/weekly/monthly KPI&rsquo;s via meetings, email, and End of Month reports.</li><li>
Analyze data required to understand a problem and develop solutions. This includes, but is not limited to: quality data, manufacturing process data, dimensional data, engineering data, training records, audit results, etc.</li><li>
Investigate and appropriately document quality problems using root cause analysis methods and identify robust corrective actions.
</li><li>Create and maintain all relevant Work Instructions, SOP&rsquo;s, Training Documents, and Workmanship Standards</li><li>
Use quality tools such as failure analysis, root cause analysis, DOE, PFMEA, SPC, and others, to identify the source of a problem, correct the problem, and prevent future occurrences on same or similar products.</li><li>
Identify and coordinate containment of any nonconforming materials</li><li>
Audit manufacturing processes for compliance to quality, manufacturing, and engineering standards. Work with the relevant parties to develop plans to address non-conforming audit results.</li></ul><ul><li><i>The responsibilities as defined are intended to serve as a general guideline for this position.</i></li><li><i>Associates may be asked to perform additional tasks depending on strengths and capabilities.</i></li></ul><p></p><div><b><br>
</b></div><div><b>
Required Experience:</b></div><ul><li>
5+ Years&rsquo; experience in Process Engineering, Quality Assurance Engineer, or Operations Management is required.</li><li>
Experience with ISO/TS or Automotive Quality systems is ideal.</li><li>
Must be familiar with Manufacturing techniques such as LEAN &amp; 5S</li><li>
Must be able to handle multiple projects simultaneously as priorities can change very quickly.</li><li>
Lifting Requirements: Medium Work &ndash; Must be able to lift up to 50 pounds from floor to waist.</li><li>
Must be able to sit for more than 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs.</li></ul><div><b>
Preferred Experience:</b></div><ul><li>
Electronic industry experience is <b>highly desired</b>.</li><li>
Experience with ISO 9001 / IATF 16949, or Mil/Aero/Medical quality systems <b>highly desired.</b></li><li>
Knowledge of IPC 610, IPC 620, or J-STD-001 desired.</li></ul><div><b>
Required Education:</b></div><ul><li>
Bachelor&rsquo;s degree in Engineering (Industrial, Manufacturing, Mechanical, other) is required.</li></ul><div><b>
Preferred Education:</b></div><ul><li>
Six Sigma or Problem Solving background <b>desired.</b></li></ul></div>

Manufacturing Quality Engineer (MQE)

Join SAMTEC, INC and explore 1   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

SAMTEC, INC

About Company

Manufacturing Quality Engineer (MQE)