Qureos Mentor

Skyline Infra Solutions

The Machine Maintenance Engineer is responsible for minimizing downtime and maximizing the lifespan of plant machinery. This role involves a mix of mechanical, electrical, and hydraulic maintenance. You will execute preventative maintenance schedules and perform emergency repairs on hydraulic presses, pan mixers, conveyor belts, and batching plants. Key Responsibilities: Preventative Maintenance (PPM): Develop and execute a weekly/monthly maintenance schedule for all plant machinery. Regularly inspect hydraulic power packs, cylinders, valves, and pumps to prevent leakage and pressure drops. Monitor wear and tear on critical parts (e.g., mixer blades, mold liners, conveyor rollers) and replace them proactively. Breakdown &amp; Repair: Respond immediately to machine breakdowns to minimize production loss. Diagnose faults in hydraulic systems (e.g., oil overheating, slow ram movement) and electrical panels (PLC logic, sensors, contactors). Perform welding, cutting, and fabrication work if structural repairs are needed on site. Electrical &amp; Automation: Troubleshoot issues in the Control Panel (PLC), VFDs (Variable Frequency Drives), and limit sensors. Ensure all motors (induction motors, vibrator motors) are running within safe amperage limits. Spare Parts Management: Maintain an inventory of critical spares (O-rings, hydraulic seals, bearings, V-belts, solenoids). Coordinate with the Plant In-Charge to order parts before stock runs out. Safety &amp; Compliance: Ensure all machines have proper safety guards and emergency stop buttons are functional. Maintain a logbook of all maintenance activities, breakdowns, and parts replaced. Requirements &amp; Skills: Education: Diploma or B.Tech in Mechanical/Electrical Engineering, or ITI with significant experience. Experience: Minimum 3&ndash;6 years in a manufacturing environment (experience with Hydraulic Presses or Concrete Plants is highly preferred). Technical Skills: Strong knowledge of Hydraulic Circuitry and fluid power systems. Ability to read electrical wiring diagrams and hydraulic schematics. Hands-on experience with welding (Arc/MIG) is a plus. Soft Skills: Problem-solving mindset, ability to work under pressure during breakdowns, and good communication skills. Key Performance Indicators (KPIs): Machine Uptime: Maintaining &gt;95% machine availability. Response Time: Time taken to attend to a breakdown. MTTR (Mean Time To Repair): Average time taken to fix a failure.Job Types: Full-time, PermanentPay: ₹10,000.00 - ₹21,000.00 per monthWork Location: In person

Machine Maintenance Engineer

Job Title: Maintenance Technician Department: Production / Maintenance Reports to: Plant Manager / Production Supervisor Job Summary The Maintenance Technician is responsible for ensuring the continuous operation of the automated or semi-automated brick/block making plant. This role involves the daily inspection, troubleshooting, and repair of hydraulic, mechanical, and electrical components to minimize downtime and ensure product quality. Key Responsibilities 1. Hydraulic System Maintenance Pressure Management: regularly monitor and adjust the hydraulic pressure settings (tonnage) to ensure bricks/blocks meet the required compaction density. Leakage Control: Inspect hydraulic hoses, cylinders, and power packs daily for oil leaks. Replace worn-out O-rings and seals immediately to prevent pressure drops. Fluid Maintenance: Check hydraulic oil levels and temperature. Ensure the oil filter is cleaned or replaced periodically to prevent contaminants from damaging the pump. 2. Mechanical Maintenance Mold Management: Perform frequent checks on the mold box and tamper head for alignment. Replace or repair liners if the bricks show dimensional variations. Vibration System: Maintain the vibrating table (unbalanced mass motors) by checking bolt tightness and bearing condition. Loose bolts here can lead to cracks in the machine frame. Conveyor &amp; Pan Mixer: Adjust conveyor belt tension to prevent slipping. Replace mixing blades (scraper/shovel) inside the pan mixer when they wear down to ensure uniform mixing of raw materials. 3. Electrical &amp; Automation Support Sensor Calibration: Clean and align proximity sensors (limit switches) that control the automatic feeder and pallet movement. Motor Health: Inspect induction motors for overheating or unusual noise. Check connections in the control panel for loose wires that could cause short circuits. Panel Operation: Assist in troubleshooting basic PLC (Programmable Logic Controller) errors or relay logic failures during machine stoppages. 4. Preventive Maintenance (PM) Lubrication: Execute a strict greasing schedule for all moving parts, specifically the guide rods (columns) of the press machine and conveyor bearings. Cleaning: Ensure the machine is cleaned of hardened concrete/fly ash mix at the end of every shift to prevent jamming of moving parts. Requirements &amp; Qualifications Education: ITI or Diploma in Mechanical/Fitter/Electrician trade. Experience: 2&ndash;5 years of hands-on experience in Hydraulic Press Machines or Concrete Block Plants. Technical Skills: Proficiency in Arc Welding and gas cutting (essential for frame repairs). Ability to read hydraulic circuit diagrams. Basic understanding of 3-Phase electrical connections. Physical: Ability to lift heavy tools/parts and work in dusty environments. Key Performance Indicators (KPIs) Machine Uptime: Maintaining &gt;95% machine availability during production shifts. Mean Time To Repair (MTTR): Speed of resolving breakdowns (target: &lt;30 mins for minor issues). Spare Parts Management: Maintaining minimum stock levels of critical spares (V-belts, oil seals, bearings) to avoid stock-out delays.Job Types: Full-time, PermanentPay: ₹10,000.00 - ₹20,000.00 per monthWork Location: In person

Maintenance Technician

Join Skyline Infra Solutions and explore 2   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

Skyline Infra Solutions

ABOUT_COMPANY

Machine Maintenance Engineer

Maintenance Technician