Abrar Admin

The Shaw Group

<div>
 
 
 We&rsquo;re Hiring: QC NDT Technician
 
 
 
 Join our Quality &amp; NDT team and play a vital role in ensuring material integrity, safety, and compliance across critical fabrication and construction projects.
 
 
 
 Reporting to:
 
 Assistant Manager &ndash; NDT (Level III)
 
 
 
 Minimum Qualifications
 
 
 <ul>
 <li>
 ITI / Diploma in
 
 Mechanical
 
 ,
 
 Metallurgy
 
 , or related technical field
 </li>
 <li>
 High‑school certificate may be considered with strong relevant experience
 </li>
 </ul>
 
 
 Minimum Experience
 
 
 <ul>
 <li>
 
 3&ndash;5 years
 
 of hands‑on PMI testing experience (shop or site)
 </li>
 <li>
 Experience with
 
 welds, base materials, piping, and pressure equipment
 
 is preferred
 </li>
 </ul>
 
 
 Key Responsibilities
 
 
 
 
 Positive Material Identification (PMI)
 
 
 <ul>
 <li>
 Perform PMI testing on
 
 base materials, welds, and components
 
 using XRF/OES analysers as per approved procedures
 </li>
 <li>
 Ensure PMI equipment is
 
 calibrated, valid, and verified
 
 daily
 </li>
 <li>
 Verify material grade and alloy composition against
 
 material standards and project specifications
 
 </li>
 <li>
 Conduct PMI at required
 
 locations, quantities, and frequencies
 
 per drawings, ITPs, and client requirements
 </li>
 <li>
 Prepare accurate PMI reports and submit for QC/NDT Engineer review
 </li>
 <li>
 Immediately report
 
 non‑conforming or suspect results
 
 </li>
 <li>
 Ensure proper surface preparation and correct analyser positioning for reliable readings
 </li>
 <li>
 Maintain strict
 
 traceability
 
 between tested items, heat numbers, and identification markings
 </li>
 <li>
 Follow all
 
 radiation safety
 
 and site
 
 HSE rules
 
 when using XRF equipment
 </li>
 <li>
 Support client, third‑party, and regulatory inspections related to PMI activities
 </li>
 <li>
 Assist in continuous improvement of PMI practices under QC/NDT leadership
 </li>
 </ul>
 
 
 Hardness Testing
 
 
 <ul>
 <li>
 Perform hardness testing on
 
 base metal, weld metal, and HAZ
 
 in accordance with approved procedures and applicable codes
 </li>
 <li>
 Ensure hardness testing equipment is
 
 calibrated and verified
 
 using reference blocks
 </li>
 <li>
 Prepare surfaces properly to ensure
 
 accurate and repeatable
 
 readings
 </li>
 <li>
 Select the appropriate hardness method (
 
 Brinell, Rockwell, Vickers, UCI, Leeb
 
 ) as per project requirements
 </li>
 <li>
 Conduct hardness testing
 
 before and after PWHT
 
 , ensuring compliance with acceptance criteria
 </li>
 <li>
 Prepare accurate hardness test reports and submit for QC/NDT Inspector review
 </li>
 <li>
 Report any
 
 non‑conforming results
 
 immediately
 </li>
 <li>
 Ensure testing is performed at correct
 
 locations, quantities, and frequencies
 
 </li>
 <li>
 Maintain proper handling, storage, and traceability of hardness testing equipment
 </li>
 <li>
 Comply with all
 
 HSE requirements, work permits, and site safety rules
 
 </li>
 <li>
 Support audits, inspections, and witness activities
 </li>
 <li>
 Maintain confidentiality and ensure test records remain retrievable
 </li>
 </ul>
 
 
 Location &amp; Travel
 
 
 
 Bahrain
 
 
 
 About The Shaw Group
 
 
 
 The Shaw Group is a leading provider of industrial fabrication and specialty services, delivering innovative solutions across energy and infrastructure sectors. With a commitment to safety, quality, and customer success, we empower our teams to drive excellence and shape the future of our industry.
 
 
 
 EEO &amp; Inclusion
 
 
 
 We are an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. If you need accommodation during the interview process, please let us know.
 
</div>

NDT Technician

<div>
 
 
 We&rsquo;re Hiring: Material Controller
 
 
 
 Join our fabrication team and play a key role in keeping production running smoothly and efficiently.
 
 
 
 Reporting to:
 
 Materials Manager
 
 
 As a
 
 Material Controller
 
 , you will be the backbone of our material flow&mdash;managing inventory, coordinating deliveries, and ensuring our production teams always have what they need to perform at their best.
 
 
 
 Minimum Qualifications
 
 
 <ul>
 <li>
 High school diploma or equivalent
 </li>
 <li>
 Experience in inventory management (preferred)
 </li>
 <li>
 Solid understanding of inventory procedures and material handling
 </li>
 <li>
 Strong attention to detail and excellent communication skills
 </li>
 </ul>
 
 
 Minimum Experience
 
 
 <ul>
 <li>
 2+ years in a similar role, ideally within the
 
 Fabrication
 
 or
 
 Manufacturing
 
 industry
 </li>
 </ul>
 
 
 Key Responsibilities
 
 
 
 
 Inventory Management
 
 
 <ul>
 <li>
 
 Monitor and control
 
 material inventory levels
 </li>
 <li>
 Perform
 
 regular stock counts
 
 and reconcile discrepancies
 </li>
 </ul>
 
 
 Material Handling
 
 
 <ul>
 <li>
 Organize and maintain
 
 efficient storage areas
 
 </li>
 <li>
 Manage safe and timely
 
 material movement
 
 across the facility
 </li>
 </ul>
 
 
 Delivery Coordination
 
 
 <ul>
 <li>
 
 Schedule, track, and follow up
 
 on material deliveries to meet production timelines
 </li>
 </ul>
 
 
 Quality Control
 
 
 <ul>
 <li>
 Inspect incoming materials to ensure
 
 quality, accuracy, and compliance
 
 </li>
 </ul>
 
 
 Documentation
 
 
 <ul>
 <li>
 Maintain
 
 accurate and up‑to‑date records
 
 of all material transactions and inventory levels
 </li>
 </ul>
 
 If you&rsquo;re detail‑oriented, proactive, and ready to support a fast‑paced production environment, we&rsquo;d love to hear from you.
 
 
 
 Location &amp; Travel
 
 
 
 Bahrain
 
 
 
 About The Shaw Group
 
 
 
 The Shaw Group is a leading provider of industrial fabrication and specialty services, delivering innovative solutions across energy and infrastructure sectors. With a commitment to safety, quality, and customer success, we empower our teams to drive excellence and shape the future of our industry.
 
 
 
 EEO &amp; Inclusion
 
 
 
 We are an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. If you need accommodation during the interview process, please let us know.
 
</div>

Materials Controller

<div>
 
 The
 
 Welding Supervisor
 
 is responsible for overseeing daily welding operations to ensure all activities are executed safely, efficiently, and in accordance with approved procedures and project specifications. The role involves allocating manpower and equipment, monitoring weld quality, maintaining documentation, and coordinating with QC, HSE, and other departments to meet production targets. The Welding Supervisor ensures proper use of welding resources, enforces safety standards, resolves technical or manpower issues, and provides daily progress updates to management.
 
 
 
 
 
 
 REPORTING TO:
 
 
 
 Fabrication Manager
 
 
 
 
 
 
 MINIMUM QUALIFICATIONS:
 
 
 
 Diploma / ITI Welding Technology, or equivalent.
 
 
 
 
 
 
 MINIMUM EXPERIENCE:
 
 
 <ul>
 <li>
 Minimum
 
 5&ndash;8 years
 
 of relevant experience in welding supervision.
 </li>
 <li>
 Experience in
 
 Oil &amp; Gas, piping, pipe fabrication.
 
 </li>
 <li>
 Knowledge of welding standards such as
 
 ASME, AWS, ISO
 
 .
 </li>
 <li>
 Strong knowledge of TIG, MIG, SAW, SMAW, FCAW, GMAW and automation welding processes.
 </li>
 <li>
 Familiar with WPS, PQR, WPQ, ITP, and welding codes.
 </li>
 <li>
 Ability to read and interpret engineering drawings, isometrics, and weld symbols.
 </li>
 <li>
 Basic computer skills for reporting and documentation.
 </li>
 </ul>
 
 
 
 
 
 Work Location:
 
 Bahrain
 
 
 
 
 
 
 SPECIFIC RESPONSIBILITIES:
 
 
 <ul>
 <li>
 Supervise day-to-day welding activities in line with project schedule and priorities.
 </li>
 <li>
 Ensure all welding work is performed as per approved WPS, ITP, drawings, and project specifications.
 </li>
 <li>
 Allocate welders, helpers, and equipment to achieve production targets.
 </li>
 <li>
 Verify that welders are qualified and deployed only for approved welding processes.
 </li>
 <li>
 Monitor weld quality and control repairs to minimize rework and delays.
 </li>
 <li>
 Coordinate closely with QC, HSE and Stores departments.
 </li>
 <li>
 Ensure availability and proper utilization of welding machines, consumables, and tools.
 </li>
 <li>
 Maintain welding-related documentation including welder performance records, repair logs, and daily progress reports.
 </li>
 <li>
 Identify technical or manpower-related issues and implement corrective actions.
 </li>
 <li>
 Enforce compliance with HSE policies, safe work practices, and permit-to-work systems.
 </li>
 <li>
 Conduct toolbox talks and ensure safe execution of welding activities.
 </li>
 <li>
 Report daily progress, manpower deployment, and constraints to management.
 </li>
 </ul>
</div>

Welding Supervisor

<div>
 
 
 We&rsquo;re Hiring: QC PWHT Inspector
 
 
 
 Join our Quality team and play a critical role in ensuring all
 
 Post Weld Heat Treatment (PWHT)
 
 activities meet the highest standards of safety, compliance, and technical excellence.
 
 
 
 Job Summary
 
 
 
 The
 
 QC PWHT Inspector
 
 is responsible for overseeing and verifying all PWHT activities to ensure full compliance with approved procedures, project specifications, and applicable industry codes such as
 
 ASME B31.3
 
 and
 
 ASME Section VIII
 
 . This role requires strong technical expertise, meticulous attention to detail, and the ability to coordinate effectively with clients, contractors, and inspection teams throughout all stages of PWHT execution.
 
 
 
 Reporting To:
 
 
 
 Project Quality Manager
 
 
 
 Minimum Qualifications
 
 
 <ul>
 <li>
 
 BE Mechanical
 
 (full‑time) from a UAE‑approved university
 </li>
 <li>
 
 Welding Inspector certification
 
 (CSWIP 3.1 or AWS CWI)
 </li>
 <li>
 
 ASNT Level II
 
 in RT, UT, MPT, LPT preferred
 </li>
 <li>
 ASNT Level III certificates signed by individuals are
 
 not accepted
 
 ; only institutional certifications with 25+ years of experience
 </li>
 <li>
 Knowledge of
 
 ISO 9001:2015
 
 preferred
 </li>
 </ul>
 
 
 Minimum Experience
 
 
 <ul>
 <li>
 Strong knowledge of
 
 ASME Section IX
 
 ,
 
 AWS D1.1
 
 , and client specifications
 </li>
 <li>
 In‑depth understanding of international codes and standards (ASME, API, AWS, DIN, JIS, etc.)
 </li>
 <li>
 Ability to interpret PWHT charts is essential
 </li>
 <li>
 Experience with
 
 localized furnace PWHT
 
 ,
 
 local PWHT
 
 , and
 
 site PWHT
 
 </li>
 <li>
 Experience working with major clients such as
 
 ADNOC, Saudi Aramco, PDO, Shell, EIL, NTPC, Technip
 
 , etc.
 </li>
 <li>
 Familiarity with various material types
 </li>
 <li>
 Experience in
 
 VT, PT, MT
 
 , and radiographic film interpretation
 </li>
 <li>
 Minimum
 
 6 years
 
 experience in fabrication shops and site environments
 </li>
 <li>
 Strong communication skills and ability to work independently or in a team
 </li>
 <li>
 Client‑specific approvals (e.g.,
 
 Aramco approval
 
 ) may be required
 </li>
 </ul>
 
 
 Key Responsibilities
 
 
 
 
 Procedure Review
 
 
 <ul>
 <li>
 Review and verify PWHT procedures, including heating rates, soaking temperatures, holding times, and cooling rates
 </li>
 <li>
 Ensure compliance with
 
 ASME B31.3
 
 ,
 
 ASME Section VIII
 
 ,
 
 ASME IX
 
 , and project specifications
 </li>
 </ul>
 
 
 Pre‑Inspection Activities
 
 
 <ul>
 <li>
 Ensure the work area is clean, safe, and ready for PWHT
 </li>
 <li>
 Verify correct placement and quantity of
 
 thermocouples (TCs)
 
 </li>
 <li>
 Confirm proper setup of heating pads, insulation, and recording equipment
 </li>
 <li>
 Ensure joints are free from external stresses before heat treatment
 </li>
 <li>
 Verify calibration of all inspection and testing equipment
 </li>
 </ul>
 
 
 Monitoring &amp; Surveillance
 
 
 <ul>
 <li>
 Monitor heating, soaking, and cooling cycles to ensure full compliance with approved PWHT charts
 </li>
 <li>
 Witness PWHT activities and verify essential variables
 </li>
 <li>
 Identify, troubleshoot, and report equipment or electrical issues related to heat treatment machines
 </li>
 </ul>
 
 
 Documentation &amp; Reporting
 
 
 <ul>
 <li>
 Review PWHT charts before, during, and after heat treatment
 </li>
 <li>
 Prepare inspection records, daily reports, and
 
 NCRs
 
 for any deviations
 </li>
 <li>
 Compile final documentation and quality dossiers for client approval
 </li>
 </ul>
 
 
 Post‑PWHT Inspection
 
 
 <ul>
 <li>
 Witness removal of heating pads and insulation
 </li>
 <li>
 Ensure required
 
 NDT (MPT, LPT)
 
 is performed after TC removal
 </li>
 <li>
 Witness hardness testing as per procedure
 </li>
 <li>
 Coordinate with clients, third‑party inspectors, NDT contractors, and construction teams
 </li>
 </ul>
 
 
 Location &amp; Travel
 
 
 
 Bahrain
 
 
 
 About The Shaw Group
 
 
 
 The Shaw Group is a leading provider of industrial fabrication and specialty services, delivering innovative solutions across energy and infrastructure sectors. With a commitment to safety, quality, and customer success, we empower our teams to drive excellence and shape the future of our industry.
 
 
 
 EEO &amp; Inclusion
 
 
 
 We are an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. If you need accommodation during the interview process, please let us know.
 
</div>

Quality Assurance Quality Control Inspector

Join The Shaw Group and explore 4   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

The Shaw Group

ABOUT_COMPANY

NDT Technician

Materials Controller

Welding Supervisor

Quality Assurance Quality Control Inspector