Qureos Mentor

Waldron Engineering & Construction

<div><p>Waldron Engineering and Construction, Inc. is seeking a Senior Electrical Engineer with 7-15 years&rsquo; experience and a Professional Engineering License to join its consulting engineering team in the power and energy industry. This position is for a highly motivated individual who is interested in all aspects of industrial power generation &amp; distribution, including generators, battery energy storage and photovoltaic power systems. The position includes working in the office during design and in the field during construction support and commissioning.</p><p>
The successful candidate in this position will design Medium Voltage (MV) and Low Voltage (LV) distribution systems for industrial power generation &amp; distribution projects including Microgrids for campus and/or district energy systems, and municipal scale power generation facilities. In this role, the successful candidate will also provide engineering support for utility interconnections and generator protection schemes. Typical tasks will include short circuit, coordination, and arc flash studies, development of one and three line diagrams, protection schemes and reviewing designs for compliance with National Electric Code as well as other applicable standards. Other tasks also include working with vendors to write equipment purchase specifications.</p><p>
The successful candidate in this position will be expected to mentor and manage younger staff engineers.</p><p>
Waldron is a multi-discipline engineering and construction management firm with Electrical, Mechanical, Structural, and Controls engineering and design personnel. The position will involve close coordination with other disciplines, in a team environment with a focus on delivering successful engineering and consulting projects to our clients.</p><p><b>
Responsibilities Include:</b></p><ul><li><p>
Develop Design Documents (One Lines, Protection Onelines, Cable/Wire Schedules, Interconnect Diagrams, equipment specifications, etc.)</p></li><li><p>
Write Specifications for purchase of electrical equipment.</p></li><li><p>
Review electrical equipment submittals and ensure proper coordination with overall design. Ensure equipment meets design intent of the project.</p></li><li><p>
Perform calculations and analysis of electrical systems using ETAP and/or SKM.</p></li><li><p>
Travel to client sites during construction.</p></li><li><p>
Provide on-site commissioning support.</p></li><li><p>
Interface with clients and contractors.</p></li><li><p>
Manage and develop younger engineers.</p></li><li><p>
10-20% travel is required.</p></li></ul><p><b>
Education:</b></p><p>
BS or MS in Electrical Engineering</p><p><b>
Experience:</b></p><p>
7-15 years in Industrial Power Engineering or Construction</p><p>
PE License</p><p>
Good Communication and Time Management Skills</p><p><b>
Ideal Candidate will have Knowledge of:</b></p><p>
Basic Knowledge of Motor, Generators &amp; Transformers</p><p>
Fundamenals of Power System Analysis and Components</p><p>
Medium Voltage Circuit and Protection</p><p>
ETAP &amp; SKM Electrical Circuit Analysis Software.</p><p>
Protection Relay, Protection, Coordination and Programing</p><p>
National Electric Code (NEC)</p><p>
IEEE Standards and Guidelines</p><br>
#hc169463</div>

Senior Electrical Engineer

<div><h2 class="jobSectionHeader"><b>Company Introduction</b></h2><p>
Waldron Engineering &amp; Construction, Inc. is a consulting engineering and construction management firm specializing in the design, engineering, construction, commissioning and testing of energy generation and utility distribution facilities. Founded in 1992, we have over thirty years of experience delivering comprehensive electrical and thermal energy solutions to premier clients in the higher education, health care, pharmaceutical research, military facility, and heavy industrial market spaces.</p><h2 class="jobSectionHeader"><b>
The Opportunity</b></h2><p>
Waldron is seeking a Mechanical Engineer for their office in Exeter, NH. A person in this position will work under the supervision and direction of a Lead Mechanical Engineer (the stamping engineer) in support of various projects. The role is a primarily a production role where the employee will be the originator of engineering calculations, drawings, specifications, reports and other deliverables. This position does not require a candidate to have a PE license, but if the candidate has not done so they must be able to obtain a PE license in any state within two years.</p><p>
A person in this role is expected to have an established baseline of technical knowledge in power generation or a related industry, an understanding of overall workflow of engineering projects, and an understanding of typical types of engineering project deliverables and their purpose. The employee will receive mentoring and training as needed on specific topics to facilitate their growth. The employee will be expected to provide some amount of mentorship to less experienced staff engineers.</p><p>
Employee will work on projects in the following areas: central energy plant and utility distribution system design, mechanical process systems for power projects, technical specifications for equipment and systems, design and specification of piping systems, and economics of power generation projects.</p><p>
Waldron offers competitive salaries, full benefits including health and retirement, flexible working hours including a 9/80 schedule and part time remote work, and a positive office culture.</p><h2 class="jobSectionHeader"><b>
Responsibilities of the Role</b></h2><ul><li><p>
Perform Engineering Calculations.</p></li><li><p>
Size and Select Equipment to Meet Project Needs.</p></li><li><p>
Perform Detailed Engineering of Power and Process Piping Systems.</p></li><li><p>
Perform Detailed Engineering of Industrial Ductwork and HVAC Systems.</p></li><li><p>
Review Manufacturer&rsquo;s Drawings for Conformance to Project Needs.</p></li><li><p>
Develop Equipment and Construction Specifications.</p></li><li><p>
Develop Piping and Instrument Diagrams.</p></li><li><p>
Identify and Apply Applicable Local Codes and Standards to Project Designs.</p></li><li><p>
Compose reports and memorandums on technical subject matter for use in client communications.</p></li><li><p>
Coordinate work with other Staff Engineers and Designers.</p></li><li><p>
Coordinate Independently with Equipment Vendors.</p></li><li><p>
Perform Internal Coordination Between Disciplines.</p></li><li><p>
Provide Support to the Lead Engineer.</p></li></ul><h2 class="jobSectionHeader"><b>
Desired Experience Level</b></h2><p>
4-6 years experience in power or process engineering</p><h2 class="jobSectionHeader"><b>
Skills Required</b></h2><ul><li>
AutoCAD Plant 3D</li><li>
Navisworks</li><li>
Revit experience a plus</li><li>
MS Office</li><li>
Strong Written and Verbal Technical Communications</li><li>
Strong attention to detail</li></ul><h2 class="jobSectionHeader"><b>
Ideal Candidate Will Have Knowledge Of:</b></h2><ul><li>
Types of process equipment such as pumps, heat exchangers, control valves, etc.</li><li>
Pipe and Duct Routing</li><li>
Basic concepts of construction processes related to equipment and piping installation.</li><li><p>
Experience with below listed types of software</p><ul><li><p>
Hydraulic modeling (PipeFlo, Arrow)</p></li><li><p>
Pipe Stress (Caesar II, AutoPipe, Caepipe)</p></li><li><p>
Structural Analysis (RISA, Bentley)</p></li><li><p>
CAD (AutoCAD, AutoCAD Plant 3D, Cadworx)</p></li><li><p>
Bluebeam REVU</p></li><li><p>
Microsoft office suite</p></li></ul></li><li><p>
ASME Piping Codes Including B31.1 or B31.3</p></li></ul><h2 class="jobSectionHeader"><b>
Required Education</b></h2><p>
BS or MS in Mechanical Engineering</p><h2 class="jobSectionHeader"><b>
FLSA Status of the Position</b></h2><p>
Exempt</p><h2 class="jobSectionHeader"><b>
Other Requirements</b></h2><p>
Must be authorized to work for any employer in the United States without sponsorship of any kind now and in the future.</p><p>
Must either have a PE license or be able to obtain one within two years. Candidates without a PE but who have passed the FE examination are preferred over candidates who have not passed the FE.</p><p>
Willingness to travel up to 5 weeks per year</p><br>
#hc193275</div>

Mechanical Staff Engineer II

<div><h2 class="jobSectionHeader"><b>Company Introduction</b></h2><p>
Waldron Engineering &amp; Construction, Inc. is a consulting engineering and construction management firm specializing in the design, engineering, construction, commissioning and testing of energy generation and utility distribution facilities. Founded in 1992, we have over thirty years of experience delivering comprehensive electrical and thermal energy solutions to premier clients in the higher education, health care, pharmaceutical research, military facility, and heavy industrial market spaces.</p><h2 class="jobSectionHeader"><b>
The Opportunity</b></h2><p>
Waldron Engineering and Construction, Inc. is seeking an experienced Mechanical Designer to join its consulting team in the energy industry. This position is for a highly motivated individual who is interested in taking on a leading role in project coordination while also performing production design and drafting tasks on industrial power distribution and generation projects.</p><p>
The successful candidate in this position will collaborate with a team of multi-discipline engineers and designers to develop comprehensive mechanical design documents for Combined Heat &amp; Power (CHP) plants, campus and/or district energy systems, municipal scale power generation facilities and renewable energy facilities. In this role, the successful candidate will be responsible for the creation of plant layout and installation drawings for mechanical equipment and process systems. The role requires in-depth knowledge of industrial process piping and ductwork design, equipment layout, and the ability to coordinate design development with other disciplines.</p><p>
The role also requires an extensive understanding of drawing development and graphic information presentation, experience with conceptualizing a complete set of design documents for a project, and a proven ability to identify and convey the salient design points required by contractors who will utilize these drawings to build new facilities.</p><p>
Experience with construction support and review of field conditions is also strongly desired for this position. The ability to visit project sites, obtain key dimensional information and translate this information into design documents is an asset in this position, as well as the ability to assist contractors with implementation of the design and troubleshooting of field conditions.</p><h2 class="jobSectionHeader"><b>
Responsibilities of the Role</b></h2><ul><li>
Utilizes AutoCAD 2D and 3D, AutoCAD Plant3D, Revit, Navisworks, and other applicable CAD software to create engineering design drawings for different types of Energy related projects including the following:<ul><li>
Process &amp; Instrument Diagrams</li><li>
Piping Plans, Sections, and Isometrics</li><li>
Ductwork Plans, Sections and Details</li><li>
Installation Details for pumps, fans, instrumentation, control valves, etc.</li><li>
3D Equipment Location Plans and General Arrangement Drawings.</li><li>
Pipe and Duct Support Details</li></ul></li><li>
Review engineering submittals from equipment vendors and incorporate them into project drawings.</li><li>
Coordinate with system engineers to ensure design assumptions for hydraulics, pipe stress, thermal expansion, and other considerations are captured in the design.</li><li>
Coordinate with other internal discipline designers to achieve a successful project delivery.</li><li>
Coordinate with external consultants and vendors on design topics.</li></ul><h2 class="jobSectionHeader"><b>
Desired Experience Level</b></h2><p>
7 or more years of process piping and/or power piping and plant design</p><h2 class="jobSectionHeader"><b>
Skills Required</b></h2><ul><li>
AutoCAD Plant 3D</li><li>
Navisworks</li><li>
Revit experience a plus</li><li>
MS Office</li><li>
Development of Plan, Elevation, Section and Detail drawings for equipment and piping</li><li>
Strong Written and Verbal Technical Communications</li><li>
Strong attention to detail</li></ul><h2 class="jobSectionHeader"><b>
Ideal Candidate Will Have Knowledge Of:</b></h2><ul><li>
Principles of Process Plant Layout</li><li>
Types of process equipment such as pumps, heat exchangers, control valves, etc.</li><li>
Pipe Routing</li><li>
Duct routing</li><li>
Pipe Support Design</li><li>
Piping system fabrication, construction and installation.</li><li>
Basic concepts of construction processes related to equipment and piping installation.</li></ul><h2 class="jobSectionHeader"><b>
Required Education</b></h2><p>
AS or BS in a related field</p><h2 class="jobSectionHeader"><b>
FLSA Status of the Position</b></h2><p>
Non-Exempt</p><h2 class="jobSectionHeader"><b>
Other Requirements</b></h2><p>
Must be authorized to work for any employer in the United States without sponsorship of any kind now and in the future.</p><p>
Willingness to travel 0-3 weeks per year</p><br>
#hc175817</div>

Senior Mechanical Designer

Join Waldron Engineering & Construction and explore 3   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

Waldron Engineering & Construction

ABOUT_COMPANY

Senior Electrical Engineer

Mechanical Staff Engineer II

Senior Mechanical Designer