Qureos Mentor

X-FAB

<div><p><b>Functions/Duties:</b>
<br>
The Quality Inspection Technician plays a critical role in maintaining product quality and protecting production integrity within the semiconductor fabrication environment. This position works closely with Manufacturing, Equipment Maintenance, Process Engineering, and Quality Inspection personnel to identify, isolate, and control defects affecting CMOS, SiC, and BOBCAT technologies.<br>
The technician will support both inline and final product inspections, help minimize production excursions, and ensure rapid response to potential product quality risks. This role also supports engineering investigations and customer commitments by processing inspection requests, analyzing wafer defects, and maintaining accurate documentation within the Manufacturing Execution System (MES).<br>
The successful candidate will qualify as a QI Inspector and assist the team in meeting operational goals for process yield, product quality, and on-time delivery.</p><p><b>
Responsibilities:</b></p><ul><li><div>
Inspection and Defect Analysis<br>
<ul><li>Support Quality Inspection operations using Camtek, wafer sorting systems, Klarity defect analysis, defect review, lot checks, and wafer packing.</li><li>Perform inspections for QI lots, SIRs (Special Inspection Requests), and SWRs (Special Work Requests).</li><li>Develop and maintain inspection recipes for Camtek inspection tools.</li></ul></div></li><li><div>
Quality Control and Product Protection<br>
<ul><li>Monitor and disposition lots on hold to support product control during fab events.</li><li>Assist with controlling inline and final product quality to minimize excursions and protect customer shipments.</li><li>Initiate and support SPC Out-of-Control Action Plans, communicating with Process Engineering, Manufacturing, Equipment Engineering, and Quality teams.</li></ul></div></li><li><div>
Engineering and Customer Support<br>
<ul><li>Support engineering investigations, development projects, and customer commitments through inspection processing and defect analysis.</li><li>Document inspection activity within MES and maintain accurate records of shift activities using SharePoint.</li><li>Communicate Maverick lot information to customers when required.</li></ul></div></li><li><div>
Operational Support<br>
<ul><li>Monitor and process SIRs and SWRs in a timely manner.</li><li>Assist QI Inspectors with inventory control and material processing.</li><li>Perform weekly tool qualifications for QI inspection equipment.</li><li>Maintain inspection procedures and document lessons learned to support continuous improvement.</li></ul></div></li><li><div>
Workplace Organization<br>
<ul><li>Perform daily 6S activities, including equipment wipe-downs and work area organization when the QI Inspector is unavailable.</li></ul><br>
</div></li></ul><p><b>Current Skills/Competencies:
</b></p><ul><li>Strong technical troubleshooting and problem-solving ability</li><li>
Ability to work independently and collaboratively in a team environment</li><li>
Self-motivated with the ability to work with minimal supervision</li><li>
Flexibility to support variable schedules and overtime when required</li><li>
Strong verbal and written communication skills</li><li>
Good decision-making skills in fast-paced production environments</li><li>
Proficiency in Microsoft Excel, Word, PowerPoint, and SharePoint</li><li>
Highly detail-oriented with a strong quality mindset</li><li>
Knowledge of wafer fabrication pro</li></ul><p><b>
Minimum Requirements:</b></p><p>
Two years of college coursework in a technical field preferred OR minimum of three years of semiconductor fabrication experience, including inspection, troubleshooting, defect analysis, or lot disposition.</p></div>

Quality Inspections Technician

<div><p><b>JOB TITLE: </b><b>Facilities Controls Technician</b></p><p><b>
Functions / Duties:</b></p><p>
Install, maintain and repair electrical control systems for the facilities organization. Interface with multiple disciplines to accomplish defined tasks.</p><p><b>
Responsibilities:</b></p><ul><li>
Repair and maintain existing control systems:</li></ul><ul><li>
GE PLC systems</li><li>
Square D plc systems</li><li>
Scada System Design and Development</li><li>
Allen Bradley Control Systems</li></ul><ul><li>
Interface and work with Engineering, Safety, and maintenance staff on controls problems</li><li>
Learn area critical control systems</li><li>
Assist requested maintenance and equipment maintenance as needed
</li></ul><p><b>Current Skills / Competencies:</b></p><ul><li>
Knowledge of basic control diagrams</li><li>
Knowledge of control devices and instrumentation:</li></ul><ul><li>
Sensors</li><li>
Transducers</li><li>
Field Wiring</li></ul><ul><li>
Knowledge and experience on the design, programming and installation of PLCs</li><li>
Knowledge and experience on the design, programming and installation of VFDs</li><li>
Good verbal and written communication skills</li><li>
Must be a proven team player and self-starter</li><li>
Good problem solving and decision making skills</li></ul><p><b>
Minimum Requirements:</b></p><ul><li>
A.S. degree in Electrical/Electronics Technology or Licensed Electrician with similar controls experience</li></ul></div>

Facilities Controls Technician

<div><p><b>Job Function:</b></p><p>
Electronic and electro-mechanical maintenance, repair and qualification of process equipment in assigned area. Interface with Production and Engineering personnel on equipment and production problems and solutions.</p><p><b><br>
Responsibilities:</b></p><ul><li>
Repair, maintain and qualify process equipment in assigned area</li><li>
Interface and work with Production &amp; Engineering staff on process and production problems</li><li>
Identify root causes on wafer breakage and scratches and other equipment related problems</li><li>
Learn area critical process and maintenance requirements</li><li>
Document work as directed</li><li>
Assist Manufacturing and Equipment Engineering as needed</li></ul><p><b><br>
Skills/ Competencies:</b></p><ul><li>
Knowledge of Hi-Votage / Vacuum systems and troubleshooting</li><li>
Knowledge of Digital and Analog circuitry</li><li>
Ability to interpret schematic drawings, i.e. electrical / plumbing / pneumatic</li><li>
Mechanical aptitude</li><li>
Training on safe handling of process gases and chemicals</li><li>
Good verbal and written communication skills</li><li>
Must be a proven team player and self-starter</li><li>
Good problem solving and decision making skills</li><li>
Strong Microsoft computer skills</li><li>
Some heavy lifting required</li></ul><p><b>
Minimum Requirements:</b></p><ul><li>A.S. degree in Electrical Engineering or Electronic Engineering Technologies or equivalent experience in a related technical field.</li></ul></div>

Equipment Technician Implant

Join X-FAB and explore 3   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

X-FAB

About Company

Quality Inspections Technician

Facilities Controls Technician

Equipment Technician Implant