CNC Machinist (1st Shift) Mill Operator

Summary: 1st shift hours 07:20am - 4:20pm M-TH 7:20am to 1:20pm

Level I Machinist (CNC Machine Operator)

Performs routine operation/monitoring of CNC mills and lathes and inspection of parts produced in a fast-paced manufacturing environment.

Essential Duties:

Maintain <85% efficiency operating Haas CNC Mills and CNC Lathes

Reading Blueprints Monitor and changing cutting tools

Using all standard inspection tools daily

Responsibilities:

· Reads and interprets blueprints and have knowledge of the manufacturing sequences and machining methods required.

Complete understanding of the coordinate system.

· Operate equipment at a rate that equals or exceeds quality and efficiency standards as noted on the traveler.

· Monitor cutting tools in machine spindle and notifies supervisor of tool wear and/or tolerance problems

· Starts machine and monitors display and machine operation to detect malfunction

· Change cutting tool and adjust coolant direction according to required machining sequence or to measure for conformance to blueprint specifications, using precision measuring instruments

· Notifies supervisor of any potential machine or tool problems and malfunctions or out-of-tolerance machining. Cleans machine tools and parts

· Maintains work area in a clean, safe, or lean 5S specification this includes outside of machine and 10 minutes before the end of shift empty chips and check the coolant.

· Communicates with co-workers and supervisors to receive instructions and coordinate activities

· Responsible for proper use, operation, and care of all tools, tooling, and inspection equipment. Must adhere to company policy and procedures.

· Thorough inspection (visual and mechanical) of parts as specified by Inspection Plan and/or Blueprint.

This position may involve access to technology, technical data, or defense articles controlled under U.S. export control laws, including the International Traffic in Arms Regulations (ITAR). The selected candidate must be legally authorized to work in the United States and must be eligible to access ITAR-controlled information, which may require qualification as a “U.S. person” as defined by 22 C.F.R. § 120.62 or eligibility for any required U.S. government export authorization.

Competency:

To perform the job successfully, an individual should demonstrate the following competencies:

• Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions.
• Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Presents numerical data effectively; Able to read and interpret written information. Notate changes on the traveler as to the running of each job. Accurately update the production schedules hourly.
• Adaptability - Adapts to changes in the work environment; Manages competing demands; Able to deal with frequent change, delays, or unexpected events.

· Attendance/Punctuality – Is consistently at work on time; Ensures proper requests are completed and approved when absent.

· Dependability – Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long or extended hours when necessary to reach goals; Completes tasks on time and request help as needed.

• Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources.
• Quality/Quantity – Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Meets standards; Completes work efficiently and timely. Strives to increase productivity, Works swiftly.
• Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly.

Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Knowledge of HAAS mill and lathes.
• 1 year experience operating a CNC mill/lathe minimum
• Strong Knowledge of blueprint planning sheets and inspection tools
• Organizational skills with strong attention to detail
• Ability to perform in a fast-paced production environment
• Fluent in English

Education/Experience:

High school diploma or general education degree (GED)

Language Ability:

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence.

Math Ability:

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

Reasoning Ability:

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

Computer Skills:

No Computer skills are needed.

Certificates and Licenses:

No certifications needed

Supervisory Responsibilities:

This job has no supervisory responsibilities.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to wet or humid conditions (non-weather). The employee is occasionally exposed to vibration. The noise level in the work environment is usually moderate.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The employee must frequently lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision. While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to walk and stoop, kneel, crouch, or crawl.

Required experience:

• CNC Mill and Lathe: 1+ years

Benefit Conditions:

• Waiting period 60 days
• Only full-time employees eligible

This Job Is:

• A job for which military-experienced candidates are encouraged to apply
• A job for which all ages, including older job seekers, are encouraged to apply
• Open to applicants who do not have a college diploma

Work Remotely

• No

Job Type: Full-time

Pay: $18.00 - $22.00 per hour

Benefits:

• 401(k)
• Health insurance
• Paid time off
• Professional development assistance
• Tuition reimbursement
• Vision insurance

Experience:

• CNC Operator: 2 years (Required)

Shift availability:

• Day Shift (Required)

Work Location: In person