aerospace engineer

ADASI

<div>
 
 External Job Description
 
 
 
 
 Position -
 
 Principal Mechanical Engineer - Loads / Stress
 
 
 
 Entity :
 
 ADASI
 
 
 
 Department
 
 -Engineering Services
 
 
 
 Location-
 
 Abu Dhabi
 
 
 
 Key Responsibiities-
 
 
 
 <ul>
 <li>
 Develop aircraft-level loads for UAV systems, including: Maneuver loads (limit and ultimate cases) ,Gust and turbulence loads (where applicable) ,Ground loads (landing, taxi, handling, transportation) ,Propulsion and system-induced loads (thrust, inertia, vibration drivers) Payload and mission-dependent loads
 </li>
 <li>
 Translate mission profiles and operational scenarios into design loads, working closely with Flight Mechanics, Aerodynamics, Systems, and Test teams.
 </li>
 <li>
 Define load cases, combinations, and envelopes, ensuring: Internal consistency across disciplines, Traceability to assumptions and mission definitions ,Practical usability by stress and design teams
 </li>
 <li>
 Establish and document loads methodologies, including: Assumptions and simplifications appropriate for UAV development ,Use of empirical data, hand methods, and analytical models , Clear definition of validity ranges and limitations
 </li>
 <li>
 Perform analytical and numerical loads analysis, using- First-principles calculations (free-body diagrams, inertia relief, load paths) Simplified models (beam models, lumped masses)FEM (primarily for load extraction and distribution, not detailed stress sizing)
 </li>
 <li>
 Provide load inputs to stress, design, and systems teams, including-Section loads, interface loads, and component-level loads ,Time histories or envelopes when required ,Clear definition of coordinate systems and reference conditions
 </li>
 <li>
 Support multidisciplinary integration, ensuring loads are aligned with: Mass properties and CG evolution, Control laws and flight envelope assumptions ,Structural layouts and load paths
 </li>
 <li>
 Contribute to test definition and correlation, including: Ground and flight test instrumentation strategies (strain gauges, accelerometers) Back-calculation of loads from test data ,Updating models and assumptions based on test evidence
 </li>
 <li>
 Act as a situational technical leader by driving resolution of ambiguous or conflicting inputs ,Challenging unrealistic assumptions ,Providing technically sound direction during design reviews and critical decisions
 </li>
 <li>
 Continuously improve engineering practices, contributing to: Loads process definition and refinement templates, calculation methods, and internal guidelines , Knowledge sharing across programs
 
 
 </li>
 </ul>
 
 Educational Background
 
 :
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Mechanical or Aerospace Engineering (Master&rsquo;s or PhD preferred)
 
 
 </li>
 </ul>
 
 Professional Experience:
 
 
 
 <ul>
 <li>
 Strong understanding of aircraft loads development, including maneuver, gust, and ground loads
 </li>
 <li>
 Ability to translate real-world missions into engineering load cases, avoiding over-idealization
 </li>
 <li>
 Solid grasp of:
 
 
 </li>
 </ul>
 Rigid-body dynamics and inertia effects
 
 
 Load paths and structural interaction
 
 
 <ul>
 <li>
 Basic aeroelastic considerations (at least at conceptual level)
 </li>
 <li>
 Experience with: Analytical tools (Excel, Python, MATLAB or similar) FEM tools (ANSYS, NASTRAN, Abaqus) for load extraction and distribution
 </li>
 <li>
 Comfortable working with incomplete data, making justified engineering assumptions
 
 
 </li>
 </ul>
 Standards &amp; Compliance
 
 
 <ul>
 <li>
 Familiarity with aerospace standards (EASA, FAA, MIL-STD) as guidance frameworks, with the ability to scale and adapt them to UAV and non-certified platforms
 
 
 </li>
 </ul>
 
 Preferred Certifications
 
 
 
 <ul>
 <li>
 Chartered Engineer (CEng) or Professional Engineer (PE) (nice to have)
 </li>
 <li>
 Experience contributing to internal methods, tools, or engineering processes
 
 
 </li>
 </ul>
 
 #ADASI
 
</div>

Principal Mechanical Engineer - Loads / Stress

BAO Packaging

We&rsquo;re hiring: Aeronautic Industrial Design Engineer (UAV / UUV) &mdash; Additive Manufacturing Focus Dubai | Full-time | On-site / HybridWe are a 3D Additive Manufacturing Company and wish to strengthen our capabilities in developing Unmanned Aerial Vehicles (UAVs) and Unmanned (Aerial/)Underwater Vehicles (UUV) and we&rsquo;re looking for an Aeronautic Industrial Design Engineer who can design beautiful, functional platforms and preferably knows how to engineer parts for additive manufacturing.What we&rsquo;re looking for (must-have)<ul><li>Degree in Aerospace / Mechanical / Industrial Design Engineering (or similar)</li><li>Strong CAD skills (SolidWorks / CATIA / NX / Fusion 360)</li><li>Proven work on UAVs and/or UUVs (or comparable mechatronic platforms)</li><li>Solid experience with 3D additive manufacturing (polymer and/or metal), including:</li><li>DFAM principles</li><li>Part consolidation and light weighting</li><li>Post-processing considerations (machining interfaces, inserts, finishing)</li><li>You can show a portfolio with real parts/prototypes (not just renders)</li></ul>Bonus points (strong differentiators)<ul><li>Experience with HP Multi Jet Fusion, SLS, SLA, FDM, or metal AM (DMLS/SLM)</li><li>Composites knowledge (carbon structures, layup constraints) and hybrid builds (printed + composite)</li><li>CFD/aero intuition, sealing/IP design, corrosion/galvanic isolation (for underwater use)</li><li>Experience taking designs into small-series production</li></ul>To apply: Send your CV + portfolio + availability to rramakrishnan@dynagraph.net Subject: Aeronautic Industrial Design Engineer &ndash; UAV/UUV (Additive)Pay: AED5,000.00 - AED8,000.00 per monthWork Location: In person

Aeronautic Industrial Design Engineer (UAV / UUV)

TCOM, L.P.

<div>We develop mission-critical high-altitude balloon systems that operate in demanding real-world environments and integrate mechanical, structural, aerodynamic, thermal, and flight-critical technologies into operational platforms. Aerostar, a business unit of TCOM, is seeking a Mechanical/Aerospace Engineering Manager to lead the technical execution and strategic direction of our mechanical and aerospace engineering efforts.

This role combines engineering leadership, technical oversight, and organizational coordination. You will lead a multidisciplinary engineering team responsible for the design, analysis, integration, testing, and sustainment of aerospace structures and mechanical systems across the full product lifecycle.

The ideal candidate brings a strong engineering foundation, sound technical judgment, and the ability to align engineering execution with program priorities and long-term business strategy. This role requires someone who can lead both technically and organizationally: driving system-level engineering decisions, managing engineering execution, and ensuring teams deliver high-quality solutions on schedule.

You will work closely with systems engineering, manufacturing, software, electrical engineering, flight operations, and program management to ensure successful delivery of reliable, maintainable, and mission-ready systems.

What You&rsquo;ll Do:
<ul>
<li>Provide technical leadership and vision for mechanical and aerospace system design across multiple programs</li>
<li>Lead and manage mechanical and aerospace engineering resources, including project planning, staffing, prioritization, execution tracking, and technical coordination</li>
<li>Develop project estimates, resource plans, schedules, and progress reporting to support program execution and organizational planning</li>
<li>Support program execution through cost, schedule, technical, and risk oversight</li>
<li>Guide the development of mechanical architecture, structural designs, aerodynamic concepts, and system integration approaches</li>
<li>Oversee engineering activities related to structural analysis, thermal analysis, environmental considerations, and mechanical performance</li>
<li>Prepare and present technical materials for major program reviews, including Preliminary Design Reviews (PDRs) and Critical Design Reviews (CDRs)</li>
<li>Collaborate with manufacturing, test engineering, and operations teams to ensure designs are producible, testable, maintainable, and operationally effective</li>
<li>Oversee the integration, testing, analysis, and documentation of mechanical and aerospace systems</li>
<li>Serve as a technical interface to customers for mechanical and aerospace engineering-related program activities</li>
<li>Analyze existing systems and recommend improvements, enhancements, and modernization strategies</li>
<li>Build relationships with external partners, suppliers, and technology providers to strengthen strategic capabilities</li>
</ul>
What We&rsquo;re Looking For:

You are an experienced engineering leader with a strong technical background and the ability to lead complex engineering efforts from concept through operational deployment.

You have experience developing aerospace or mechanical systems for demanding operational environments and can guide teams through challenging technical and programmatic problems.

You are comfortable balancing technical leadership with project execution responsibilities, including planning, estimation, staffing, prioritization, progress tracking, and customer communication.

You can operate effectively at both strategic and tactical levels, helping define long-term technical direction while ensuring day-to-day engineering execution remains on track.

You communicate effectively with engineers, program leadership, customers, manufacturers, and operations personnel and can clearly present complex technical concepts during program reviews and customer engagements.

A strong engineering background is required. Experience or education in aerospace engineering, mechanical engineering, or related technical disciplines is highly valued.

You value engineering rigor, accountability, and collaboration and can help teams deliver reliable systems under real-world operational constraints.

Education &amp; Experience:
<ul>
<li>Bachelor&rsquo;s degree in aerospace engineering, mechanical engineering, physics, mathematics, or a related technical field, or equivalent experience</li>
<li>Typically, 7+ years of experience in aerospace, mechanical, or systems engineering</li>
<li>Prior technical leadership or engineering management experience required</li>
</ul>
Preferred Experience:
<ul>
<li>Aerospace structures and mechanical system design</li>
<li>Structural, thermal, or aerodynamic analysis</li>
<li>Mechanical system integration and environmental qualification testing</li>
<li>CAD and engineering analysis tools</li>
<li>Design for manufacturability and producibility</li>
<li>Requirements development and technical documentation</li>
<li>Program execution in aerospace, defense, or other regulated industries</li>
<li>Project planning, estimation, scheduling, and resource management</li>
<li>Experience preparing for and participating in PDR/CDR and other formal technical reviews</li>
</ul>
How We Work:

We are not a startup, but we operate with ownership and technical rigor. 
We are building serious aerospace systems, and we expect strong engineering discipline.

Strong preference for onsite collaboration. Hybrid may be considered. Remote candidates will not be prioritized.

Physical Requirements &amp; Working Conditions:
<ul>
<li>Physical Requirements: Ability to sit, stand, walk, bend, and reach. Reasonable accommodation may be provided for individuals with disabilities.</li>
</ul>
Working Conditions: Primarily in a standard office environment, with occasional exposure to labs, production areas, flight hardware, and field integration activities, including noise, fumes, moving machinery, and varying temperatures. Occasional travel to field sites within the United States or overseas may be required to support system deployment, integration, testing, or troubleshooting activities.

Benefits: TCOM offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts/HSAs, EAP, tuition reimbursement, parental leave, paid time off (PTO), and company-paid holidays. Programs and eligibility may vary based on hire date, classification, and schedule.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities 
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.</div>

Mechanical/Aerospace Engineering Manager

Turkish Aerospace

<div>
 
 
 Hello!
 
 
 
 
 
 
 We are proud to work for a company that we believe has a great purpose. ATAK, H&Uuml;RJET, TURKISH FIGHTER, and many more have been developed and produced by us.
 
 
 We shape our own future along with the future of aerospace in a work environment full of development opportunities. Mutual respect that we have for each other is another crucial component of our work environment.
 
 
 By joining us, you will complement your passion for discovery and curiosity with pride and bold moves. You will step into a future filled with purpose and development while creating ground-breaking products using the latest technology.
 
 
 If you have endless thirst for discovery, curiosity, perseverance, and courage we are #AimingHigher with you!
 
 
 
 
 
 
 If you have:
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Aerospace Engineering with CGPA &gt; 3.
 </li>
 <li>
 Excellent knowledge of aircraft design, aerodynamics, stability and performance.
 </li>
 <li>
 Good knowledge of broader engineering disciplines.
 </li>
 <li>
 Excellent communication skills.
 </li>
 <li>
 Excellent documentation and writing skills.
 </li>
 <li>
 Ability to work with multidisciplinary teams.
 </li>
 <li>
 Ability to complete tasks within tight deadlines.
 </li>
 <li>
 Strong work ethic and highly disciplined with excellent organizational skills.
 </li>
 </ul>
 
 
 
 
 
 YOU are the talent we've been looking for!
 
 
 
 
 
 
 
 What will you bring to us?
 
 
 
 For Turkish Aerospace Pakistan, you will
 
 <ul>
 <li>
 Performing aircraft conceptual layout and design.
 </li>
 <li>
 Performing aerodynamic analyses using low-fidelity tools such as DATCOM, OpenVSP, AVL etc.
 </li>
 <li>
 Creating aircraft external CAD models with high attention to detail.
 </li>
 <li>
 Performing CFD pre-processing including geometry preparation, mesh generation and simulation setup.
 </li>
 <li>
 Performing CFD analyses on High Performance Computer Clusters (HPC).
 </li>
 <li>
 Aerodynamic data extraction, data post-processing and data management.
 </li>
 <li>
 Interpreting aerodynamic data and correlating with design for any required modifications.
 </li>
 <li>
 Writing concise technical reports.
 </li>
 <li>
 Preparing and delivering high-quality technical presentations to technical/non-technical audiences.
 </li>
 </ul>
 
 
 
 
 
 What makes you stand out?
 
 
 <ul>
 <li>
 5+ years of experience in aircraft design and aerodynamics.
 </li>
 <li>
 Experience of multiple aircraft design and development programs.
 </li>
 <li>
 Proven ability to iterate designs to achieve performance/stability objectives.
 </li>
 <li>
 Excellent knowledge and hands-on experience of complete CFD workflow from CAD to aerodynamic data for steady/transient/dynamic simulations.
 </li>
 <li>
 Excellent command over CATIA, ANSYS FLUENT and Python/MATLAB.
 </li>
 <li>
 Experience using high performance Computing (HPC) clusters.
 </li>
 </ul>
 
 
 
 
 
 What will we bring to your career?
 
 
 <ul>
 <li>
 Experience in projects with international strategic position in a global ecosystem.
 </li>
 <li>
 Working together with highly qualified and most successful engineers in the field of aerospace.
 </li>
 <li>
 A working environment that continuously nurtures your passion for discovery, your sense of curiosity and the joy of success.
 </li>
 <li>
 The dignity of shaping the future of aerospace.
 </li>
 <li>
 Competitive pay and benefits in the market.
 </li>
 </ul>
 
 
</div>

Aerodynamics Engineer/Aerodinamik Mühendisi

LAHAB

<div>
 
 External Job Description
 
 
 
 
 Development Engineer II &ndash; Medium Caliber Ammunition Development
 
 
 
 Join our Engineering &amp; Development (E&amp;D) team as a
 
 Development Engineer II &ndash; Medium Caliber Ammunition Development
 
 , where you will play a key role in shaping advanced ammunition systems that meet the highest standards of performance, safety, and reliability.
 
 
 In this role, you will contribute across the full product lifecycle&mdash;from concept design to qualification&mdash;ensuring technical excellence, regulatory compliance, and seamless integration with weapon systems, fuzes, and related subsystems. You will collaborate closely with cross‑functional teams, suppliers, and partners to deliver innovative, high‑quality solutions aligned with EDGE&rsquo;s mission.
 
 
 
 Key Responsibilities
 
 
 
 <ul>
 <li>
 Ammunition design across conceptual, preliminary, and detailed phases, ensuring compliance with MIL‑STD, STANAG, and internal standards.
 </li>
 <li>
 Engineering analysis including structural, lethality, and penetration assessments to support design decisions.
 </li>
 <li>
 Development and qualification activities from prototype build to testing and evaluation.
 </li>
 <li>
 Industrialization support including production line definition, workflow optimization, and equipment specification.
 </li>
 <li>
 Test campaign participation including planning, coordination, and execution.
 </li>
 <li>
 Technical documentation preparation such as specifications, drawings, and reports.
 </li>
 <li>
 Cross‑functional collaboration with production, quality, supply chain, and external partners.
 </li>
 <li>
 Continuous improvement initiatives focused on performance, safety, reliability, and cost optimization.
 </li>
 <li>
 Supplier engagement and support for technical bids and customer discussions.
 </li>
 <li>
 MRP/ERP tasks related to project execution and documentation control.
 
 
 </li>
 </ul>
 
 What You Bring
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Mechanical Engineering or Aerospace Engineering.
 </li>
 <li>
 3&ndash;5 years of experience in medium caliber ammunition development, design, or manufacturing.
 </li>
 <li>
 Strong capability in 3D modelling tools (SolidWorks, Creo) and familiarity with analysis software (ANSYS, MATLAB).
 </li>
 <li>
 Knowledge of product design, development processes, and project management.
 </li>
 <li>
 A proactive, results‑driven mindset with strong planning, communication, and teamwork skills.
 </li>
 <li>
 Understanding of Lean principles, PLM/ERP systems, and engineering documentation practices.
 
 
 </li>
 </ul>
 
 Working Environment
 
 
 
 You will be based primarily in an office setting, with regular visits to integration and test facilities. Occasional travel to suppliers or international test sites may be required.
 
 
 #Lahab
</div>

Development Engineer II - Medium Caliber (Lahab)

MANTECH

<div><div><div>MANTECH seeks a highly talented Launch Vehicle Project Engineer with experience related to Launch Vehicle (LV) systems to help the Space Force redefine the future of National Security Space Launch (NSSL). This position is based in Cape Canaveral, FL.</div><div>
This position will support the United States Space Force (USSF) System Delta 80 New Entrant Launch Operations Division.</div><div>
Responsibilities include but are not limited to:</div><div><ul><li> 
Provide specialized LV systems engineering expertise including areas like propulsion, avionics, structures, mechanical systems, guidance navigation and control, mission analysis, software, manufacturing engineering, mission assurance, and launch operations at the Cape Canaveral Space Force Station, FL customer site.</li></ul></div><div><ul><li>
Support systems engineering functions such as requirements definition, design and test reviews, pedigree analysis, hardware acceptance, performance verification, operations, and post-flight analyses, ensuring effective risk assessments and mitigation planning.</li></ul></div><div><ul><li>
Prepare and directly support customer teams for launch contractor activities, including reviews, audits, site walkdowns, rehearsals, launch operations, and anomaly resolution, while ensuring proper technical data management and protection of proprietary information.</li></ul></div><div><ul><li>
Coordinate and collaborate with cross-functional teams including The Aerospace Corporation, New Launch Contractors (LCs), launch site personnel, production teams, and suppliers, while adhering to USSF and NASA range systems and operations.</li></ul></div><div><ul><li>
Serve as the technical authority within your area of specialization, supporting USSF customer briefings, status reviews, and other Space Systems Command processes through detailed evaluations, technical reports, and analytical decision-making.</li></ul></div><div><ul><li>
Exhibit proactive problem-solving and sound engineering judgment, showing dedication, initiative, and collaboration in the execution of engineering responsibilities, including risk assessment, failure analysis, and addressing multi-disciplinary challenges.</li></ul></div><div><ul><li>
Demonstrate experience with LV design and systems such as liquid propellant rocket engines, ordnance, hydraulics, avionics, ground support equipment, composite materials, and end-to-end lifecycle processes (design, integration, testing, launch, and anomaly resolution).</li></ul></div><div> 
Minimum Qualifications:</div><div><ul><li> 
Bachelor's degree or higher in an Engineering (e.g., Mechanical, Aerospace, Electrical) or STEM field. 1.5 years relevant experience may be accepted in lieu of each 1 year of education/degree requirement</li></ul></div><div><ul><li>
5+ years systems engineering, technical program management, or other related areas.</li></ul></div></div><div><div> 
Preferred Qualifications:</div><div><ul><li> 
Familiarity with space, launch, and safety standards.</li></ul></div><div><ul><li>
Experience with USSF, NASA, National Reconnaissance Office, and LCs preferred.</li></ul></div><div><ul><li>
Experience with agile software products, such as Warp Core, Jira, Confluence, MS Office Suite, SharePoint, Google Workspace, and Information Technology systems is highly preferred.</li></ul></div><div><ul><li>
Ability to create and deliver thoughtful and articulate written and verbal presentations and reports to senior engineers and management.</li></ul></div><div><ul><li>
Previous project management experience preferred.</li></ul></div><div> 
Clearance Requirements:</div><div><ul><li>
Must be able to obtain and maintain a Top-Secret clearance.</li></ul></div><div>
Physical Requirements:</div><div><ul><li>
Must be able to remain in a stationary position 50%.</li></ul></div><div><ul><li>
Needs to occasionally move about inside the office to access file cabinets, office machinery, etc.</li></ul></div></div><div><div><ul><li>
Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine and computer printer.</li></ul></div><div><ul><li>
Frequently communicates with co-workers, management, and customers, which may involve delivering presentations. Must be able to exchange accurate information in these situations.</li></ul></div></div></div>

Launch Vehicle Project Engineer

Pratt & Whitney

<div>Date Posted:
2026-04-21
Country:
United States of America
Location:
US-GA-MIDLAND-MPC ~ 8801/8987 Macon Rd ~ BLDG MPC
Position Role Type:
Onsite
U.S. Citizen, U.S. Person, or Immigration Status Requirements:
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Security Clearance Type:
None/Not Required
Security Clearance Status:
Not Required
At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world&rsquo;s most complex problems. With our three market leading businesses, world-class operations and investments in research and development, we offer capabilities and opportunity no one else can. Together, we push the boundaries of known science and find new ways to connect and protect our world.
Pratt &amp; Whitney is a world leader in the design, manufacture and service of aircraft engines and auxiliary power systems and has been revolutionizing modern flight for over 100 years. Join us and help shape the future of aerospace and defense.
The Pratt &amp; Whitney Columbus Engine Center is searching for a Powerplant Engineer to provide Engineering support to the Operations and Customer Service Departments for the assembly, disassembly, and repair of GTF commercial engines. The person in this role is the primary Engineering interface to the End-User / Customer and works closely with the Customer Service Managers to ensure all technical issues are resolved during a shop visit.
In this role you will also support other functions within the Engine Center to include Materials, Quality, and Customer Management when routine technical questions and issues that may arise in the day-to-day function of the Engine Center. Additional tasks within the Operations Engineering support include authoring aircraft engine repair work scopes and performing a technical advisory role in the dis-assembly, repair, assembly, and testing of the GTF product line.
What You Will Do:<ul><li>
Receive and understand the Shop Maintenance Instructions (SMI) document for each shop visit assigned.</li><li>
Author/load aircraft engine repair work scopes into SAP.</li><li>
Provide timely responses to Customer and Engineering technical Questions (IPFs).</li><li>
Work with Process/Production Engineers in executing work scopes and work instructions for engine repairs. (Service Bulletins, advisories, performance requirements and modification requirements)</li><li>
Do appropriate research, supporting and advising other functional areas regarding technical issues related to quality, operations processes, materials and customer support.</li><li>
Seek opportunities to reduce costs and increase quality and efficiency through the use of new materials, processes or technology.</li><li>
Assist with implementation of new materials, processes, tools or technology.</li><li>
Assist in training mechanics, inspectors and others related to various technical issues.</li><li>
Demonstrate commitment to the EH&amp;S and continuous improvement programs by complying with all policies and procedures, completing all required training, and supporting all applicable committee activities.</li><li>
Participate in failure investigations and Problem resolution boards.</li><li>
Be a source of in-depth technical knowledge on the repair and test of the GTF engine.</li><li>
Manage the Shop Visit to ensure all Gate requirements are met in accordance with the Operations Network cadence.</li><li>
Ensure each shop visit&rsquo;s workscope is generated in accordance with applicable Engine Maintenance Plan (EMP) / Customized Engine Maintenance Plan (CEMP) documents.</li></ul>
Qualifications You Must Have:<ul><li>
Bachelor's degree in engineering or other STEM field of study and 2 years prior experience to include manufacturing operations or production engineering or An Advanced Degree in a related field and minimum 2 years&rsquo; experience as listed above.</li></ul>
Preferred Qualifications<ul><li>
Degree in STEM field; Mechanical and Aerospace Engineering fields preferred.</li><li>
Engineering experience in Systems, Test, Validation or Process Development</li><li>
Experience within Disassembly, Assembly and Test (DAT) or Maintenance, Repair, and Overhaul (MRO) environments supporting aircraft engines or related products.</li><li>
Component repair utilizing complex machining, particularly in an FAA Repair Station MRO environment.</li><li>
Familiarity with 14 CFR Part 145 as it pertains to repair station Quality requirements.</li><li>
Experience interpreting technical data, engine manuals and blueprints.</li><li>
LEAN, Continuous Improvement, and/or CORE, ACE, Six-Sigma training and experience.</li><li>
Experience working with Solumina MES, SAP ERP, and MS Office Suite.</li><li>
Effectively communicate at all levels of the organization.</li></ul>
Please ensure the role type defined below is appropriate for your needs before applying to this role. This position is classified as:
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee&rsquo;s personal responsibility.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate&rsquo;s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company&rsquo;s performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans&rsquo; Readjustment Assistance Act.
Privacy Policy and Terms:</div>

GTF Powerplant Engineer (Onsite) 1st Shift

Search 1658+ Aerospace engineer jobs near you this June. New roles added regularly across leading industries. Apply today.