aircraft maintenance support

Amentum

<div><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p><p></p><p>
Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers&rsquo; manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p><p></p><p>
Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p><p></p><p>
Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p><p></p><p>
Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p><p>
USAF equivalent position is Aircraft Mechanic Apprentice.</p><p></p><p><b>
Essential Responsibilities:</b></p><ul>
<li>
Performs all daily launch/recovery duties in support of operational requirements.
</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned as requested.
</li>
</ul><p></p><p><b>Minimum Requirements</b></p><ul>
<li>
Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government</li>
<li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active State Issued Driver&rsquo;s License.</li>
<li>Must be able to acquire and maintain a valid flight-line Government Driver&rsquo;s License.</li>
<li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul><p></p><p><b>
Preferred Qualifications</b></p><ul>
<li>
Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li>
<li>RPA Deployment Experience.</li>
<li>Prior Experience as a Defense Contractor.</li>
<li>Aircraft Mechanic Experience within the last 10 years.</li>
<li>MQ-9 Experience as an Aircraft Mechanic.</li>
<li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul></div><p></p>

RPA Mx Aircraft Mechanic I/Deployment Pool (K)

Akima

<div>Company Overview:
<p></p><p><b>
Work Where it Matters</b></p><p>
Pegasus Aviation Services, an Akima company, is not just another aviation contractor. As an Alaska Native Corporation (ANC), our mission and purpose extend beyond our exciting federal projects as we support our shareholder communities in Alaska.</p><p>
At Pegasus, the work you do every day makes a difference in the lives of our 15,000 I&ntilde;upiat shareholders, a group of Alaska natives from one of the most remote and harshest environments in the United States.</p><p><b>
For our shareholders</b>, Pegasus provides support and employment opportunities and contributes to the survival of a culture that has thrived above the Arctic Circle for more than 10,000 years.</p><p><b>
For our government customers</b>, Pegasus delivers efficient, flexible, and safe aviation services as it supports domestic and international passenger and freighter airlines.</p><p><b>
As a Pegasus employee</b>, you will be surrounded by a challenging, yet supportive work environment that is committed to innovation and diversity, two of our most important values. You will also have access to our comprehensive benefits and competitive pay in addition to growth opportunities and excellent retirement option.</p>
Description:
<div>
The AMT Lead is responsible for performing advanced aircraft maintenance while providing technical leadership, training, and coordination for Aircraft Maintenance Technicians (AMTs). This position ensures aircraft maintenance activities are performed safely, efficiently, and in compliance with FAA regulations, company policies, and customer requirements.</div><div></div><div><br>
The AMT Lead serves as a working lead, assisting the Maintenance Duty Manager by assigning tasks, monitoring work progress, troubleshooting technical issues, approving technician time records, and ensuring maintenance documentation is accurate and complete. This role also plays a key part in training and developing junior technicians and maintaining high standards of operational reliability, safety, and quality maintenance performance.</div><div></div><div><br>
Experience on common transport category aircraft such as B777, B747, B737, B767, and/or Airbus A319/A320/A321 is strongly preferred.</div>
Responsibilities:
<ul><li>Perform aircraft transit inspections and identify maintenance discrepancies.</li><li>
Troubleshoot and diagnose aircraft mechanical and electrical systems.</li><li>
Perform removal and replacement of defective components and conduct operational checks.</li><li>
Conduct aircraft system testing to ensure proper functionality prior to return to service.</li><li>
Interpret technical manuals, engineering drawings, blueprints, and schematics.</li><li>
Operate tools, power equipment, and ground support equipment required to perform maintenance.</li><li>
Complete all required maintenance documentation accurately and in accordance with FAA regulations and company procedures.</li></ul><div><b>
Leadership and Training Responsibilities:</b></div><br>
<div></div><ul><li>
Provide technical leadership and guidance to Aircraft Maintenance Technicians during maintenance operations.</li><li>
Train, mentor, and coach junior AMTs on maintenance procedures, troubleshooting techniques, and safety standards.</li><li>
Assist in the development of training materials and onboarding processes for new technicians.</li><li>
Assign and prioritize daily maintenance tasks to ensure efficient workflow and timely aircraft servicing.</li><li>
Review and approve technician time records in accordance with company policy.</li><li>
Monitor maintenance activities to ensure compliance with FAA regulations, company policies, and safety standards.</li><li>
Serve as the primary technical resource for troubleshooting complex maintenance issues.</li><li>
Review maintenance documentation and logbook entries for accuracy and completeness.</li><li>
Communicate operational status, delays, or maintenance concerns to the Maintenance Duty Manager.</li><li>
Assist in coordinating manpower and workload distribution during operational periods.</li><li>
Promote a strong safety culture and adherence to company safety programs.</li><li>
Perform other duties as assigned by the Supervisor or Manager.</li></ul>
Qualifications:
<ul><li>FAA Airframe and Powerplant (A&amp;P) License required.</li><li>
Minimum 3&ndash;5 years of aircraft maintenance experience preferred.</li><li>
Previous lead, crew lead, or supervisory experience preferred.</li><li>
Must be at least 18 years of age.</li><li>
Must possess a valid driver&rsquo;s license.</li><li>
Ability to read, write, speak, and understand English fluently.</li><li>
Ability to work in a fast-paced operational environment with tight time constraints.</li><li>
Must be willing to work nights, weekends, holidays, and varying schedules.</li><li>
Must be willing to work outdoors in all weather conditions.</li><li>
Must be legally authorized to work in the United States.</li><li>
Must be able to obtain and maintain airport security badging, including TSA fingerprint-based criminal history records check and pre-employment drug testing.</li></ul><div><b>
Preferred Qualifications:</b></div><br>
<div></div><ul><li>
Previous Lead AMT, Crew Chief, or supervisory experience.</li><li>
Experience working in line maintenance operations supporting commercial aircraft.</li><li>
Experience on transport category aircraft such as B777, B747, B737, B767, or Airbus A319/A320/A321.</li><li>
Familiarity with airport ground operations and maintenance coordination in active ramp environments.</li><li>
Experience training or mentoring junior mechanics.</li></ul><div><b>
Knowledge, Skills, and Abilities</b></div><br>
<div></div><ul><li>
Strong knowledge of aircraft maintenance procedures and FAA regulations.</li><li>
Ability to troubleshoot complex aircraft mechanical and electrical systems.</li><li>
Ability to interpret technical manuals, engineering drawings, and schematics.</li><li>
Strong leadership, training, communication, and organizational skills.</li><li>
Ability to prioritize tasks and coordinate maintenance activities in a time-sensitive operational environment.</li><li>
Strong attention to detail and commitment to safety.</li></ul><div><b>
Physical Demands:</b></div><br>
<div></div><ul><li>
Lift, push, pull, and move components weighing up to 50&ndash;60 pounds, with or without reasonable accommodation.</li><li>
Stand, walk, bend, kneel, and stoop for extended periods.</li><li>
Use hands and tools to perform maintenance tasks.</li><li>
Wear required Personal Protective Equipment (PPE).</li><li>
Have sufficient visual acuity, with or without corrective lenses, to safely perform aircraft maintenance duties, including reading technical manuals, identifying components, and conducting inspections.</li></ul><div><b>
Work Environment:</b></div><br>
<div></div><ul><li>
Work is typically performed outdoors and may involve exposure to varying weather conditions, including rain, snow, wind, and extreme temperatures.</li><li>
Ability to work from lift platforms up to 100 feet, use ladders up to 8 feet, and stair platforms up to 30 feet.</li><li>
Operation of airport vehicles and ground support equipment.</li><li>
Noise levels may vary from moderate to high, and hearing protection may be required.</li></ul><div>
FLSA Status</div><div>
Non-Exempt (Hourly)</div><div></div><div><b><br>
Disclaimer</b></div><div></div><div><br>
This job description is not intended to list all duties or responsibilities and may be modified as operational needs change. Employees may be required to work overtime as necessary to support operational requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.</div>
Job ID: 2026-23717 Work Type: On-Site</div>

Aircraft Maintenance Technician Lead

Jet Midwest

<div><p><b><i>Who are we?</i></b></p><p>
Jet Midwest is a full-service commercial aviation company, specializing in the sale and lease of commercial aircraft, engines, and parts as well as aircraft maintenance, repair, and overhaul services to the aviation industry. This position is located at the Kansas City International Airport Area, in the former TWA Overhaul Base facility. We are looking for a motivated, high-energy team member to join our Technical Services team.</p><p><b><i>
Position Description:</i></b></p><p>
Title: Aircraft Technical Representative</p><p>
Status: Full time</p><p>
Department: Technical Services</p><p><b>
Summary:</b></p><p>
The Aircraft Technical Representative is a highly visible position, responsible for in-depth analysis of related technical and operational data, configuration manuals and records, maintenance records, and repair analysis. Provides oversight of aircraft heavy maintenance, P2F conversion, and long-term planning activities for Technical Services leadership.</p><p><b>
Essential Duties &amp; Responsibilities </b>included, but not always limited to:</p><ul><li>
Lead the Aircraft Delivery process for specific aircraft as defined from time to time.</li><li>
Act as the Designated Representative for aircraft undergoing maintenance and preparatory work, for delivery to a customer.</li><li>
Represent the company and provide instruction, direction &amp; authorization related to work on the Aircraft with designated MRO provider.</li><li>
Ensure aircraft is completed on schedule and delivered to the customer in compliance with required delivery conditions including maintenance status and technical documentation.</li><li>
Coordinate activities across all departments &amp; suppliers to ensure timely aircraft delivery.</li><li>
Maintain budget oversight over works being performed and scrutinize performance of suppliers, including providing authorization for additional works within scope of delegated authority.</li><li>
Act as primary technical point of contact for all matters pertaining to the aircraft internally and with the end user customer.</li><li>
Coordinate the activities of staff assigned to support the role.</li><li>
Serve as the technical subject matter expert for the company in the area of expertise and provide support to all other business areas, supporting Sale and Lease functions by providing technical assistance, guidance, and instruction as needed to enhance asset acquisition, sale, and technical evaluation process</li><li>
Provide in-depth analysis of technical data with respect to commercial aircraft airframe products and associated systems, covering technical and operational data, configuration manuals &amp; records, maintenance records and repairs</li><li>
Review cost and schedule estimates from third party maintenance organizations, and coordinates related company &amp; technical activities, as needed</li><li>
Support any design, repair development and repair sourcing and assessment activities, as needed</li><li>
Assist in evaluating Airworthiness Directives and Service Bulletins to support pre/post-buy activities, and for impact to potential sales, leasing, and other operational opportunities of airframe products and components thereof</li><li>
Make recommendations on purchase, replacement, repair, or modification of airframe products</li><li>
Provide post-sale/post-lease support to external customers via sales team to answer technical questions, research/obtain technical data, and supply any customer required documentation.</li><li>
Communicate and consult with customers, internal team, and external agents on technical, commercial, and operational matters related to specialization area</li><li>
Direct contact with customers, co-workers across the organization, and external stakeholders</li><li>
Regular interaction and coordination with team members at all levels of our supply chain</li><li>
Entrepreneurial, challenging, competitive, flexible, fast-paced, and fun .</li><li>
Collaborative and growth-minded</li></ul><p><b>
Education &amp; Experience</b><b>:</b></p><ul><li>
A Bachelor&rsquo;s degree, diploma, or FAA Airframe &amp; Powerplant license, or equivalent field experience suited to this role</li><li>
5+ years of experience performing airframe product technical management.</li><li>
Strong generalist knowledge in commercial aircraft technical management</li><li>
Demonstrable knowledge of all records and regulatory requirements for airframe products and have specialized knowledge of back to birth trace for all life-limited parts</li><li>
Working expertise with FAA regulations, ATA standards, and EASA regulations</li><li>
Substantial experience supporting and navigating cross-functional teams</li><li>
Demonstrated history with and ability to use sound judgement and discretion in dealing with outside vendors, coworkers, customers, and other outside parties</li><li>
Strong proficiency with:<ul><li>
Organization and attention to detail</li><li>
Professional communication</li><li>
MS Office, particularly Excel, and general office technology</li><li>
Leveraging technology to enhance work processes in compliance with industry requirements.</li></ul></li></ul><p><b>
Physical Demands &amp; Work Environment:</b></p><p>
While performing the responsibilities of the Delivery Manager, you will be seated at a desk, using a phone and computer, the majority of your workday. Less than 5% of your job duties will require the ability to: walk long distances, climb or balance, stoop, kneel, crouch and crawl. The noise level is usually low, as consistent with an office environment. At times, some lifting may be required, up to 50 lbs. to sort and move record containers. These job duties are performed indoors in a climate-controlled environment.</p><p>
This job description is intended to convey information essential to understanding the scope of the Aircraft Technical Representative position and is not intended to be an exhaustive list of knowledge, skills, ability, efforts, duties, responsibilities or working conditions associated with the position.</p><p>
Reasonable accommodation may be made to enable individual with disabilities to perform the essential functions of the job.</p><p>
EOE M/F/D/V</p><p><b><i>
Benefits:</i></b></p><ul><li>
Eligibility for our comprehensive benefits program starting the 1st of the month after 30 days of full-time employment.</li><li>
401K with company match</li><li>
Paid time off and holidays</li><li>
Growth opportunities</li></ul></div>

Aircraft Technical Representative

DHL Express

<div>
 <strong>
  YOU TACKLE FOR QUALITY AND GREAT SERVICE. THIS WILL IMPROVE THE LIFE OF OUR CUSTOMERS.
  <br/>
  <br/>
 </strong>
 Would you like to become part of the world's most international company in the world?
 <br/>
 <br/>
 A company that pioneered cross-border express delivery in 1969 and is now active in more than 220 countries and territories worldwide. Do you want to be part of a company that connects people worldwide? And the more people we connect, the better life will be on our planet.
 <br/>
 <br/>
 Join our team and discover how an international network that's focused on service, quality and sustainability, is able to connect people and improve lives through the power of global trade. And not just for our customers, but for every member of our team too. To learn more about our culture, motivated people and our purpose, please visit www.dpdhl.jobs/express
 <br/>
 <br/>
 Do you want to make a difference? Then come to our "Insanely Customer Centric" Team and become a Certified International Specialist!
 <br/>
 <br/>
 <strong>
  Overall Role Purpose
  <br/>
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Supervises licensed engineers and unlicensed maintenance mechanics. Has authorization to release aircraft back to service for which he is legally entitled to certify. Supervises licensed engineers and unlicensed maintenance mechanics. Has authorization to release aircraft back to service for which he is legally entitled to certify.
  </li>
  <li>
   Technical role with authorization to release aircraft back to service for which he is legally entitled to certify.
  </li>
  <li>
   Maintaining highest possible technical DRR whilst assessing multiple factors surrounding aircraft serviceability
   <br/>
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Your Tasks:
  <br/>
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Ensure that aircraft maintenance is performed to the highest standards and at all times in compliance with applicable and approved data.
  </li>
  <li>
   Assist in &ldquo;On-the-job&rdquo; training of mechanics and trainees in the performance of their duties.
  </li>
  <li>
   Responsible for the upkeep and update of Company issued IT such as IPADs &amp; onboard carried mobile phones.
  </li>
  <li>
   Responsible for the written and verbal communication of information from his shift to the succeeding shift to ensure a satisfactory level of continuity and safety with regard to work in progress (or pending) with respect to aircraft, equipment, personnel and safety.
  </li>
  <li>
   Be responsible for requisitioning of parts from stores, assuring serviceability of parts, completion of appropriate tags, return of parts to stores and assuring that required forms and documents are properly completed.
  </li>
  <li>
   Maintain and Manage the ETL as end users including the procedure to print in the event of ETL failure.
  </li>
  <li>
   Ensure that all maintenance related documentation is properly actioned and completed.
  </li>
  <li>
   Keep up-to-date on all applicable regulations, Service Bulletins, Airworthiness Directives and manufacturer&rsquo;s service letters and other pertinent publications.
  </li>
  <li>
   Responsible for the completion of mandatory trainings on a quarterly basis such as Continuation Training , SFAR 88 Fuel Tank safety &amp; Human Factors.
  </li>
  <li>
   Shall ensure that safety precautions and safe practices are adhered to and practiced by those personnel under his direction. Reporting any unsafe conditions or equipment to the Line Manager.
  </li>
  <li>
   The reporting of safety risks during flights at outstations through the Trip Reporting &amp; QPULSE systems.
  </li>
  <li>
   Ensure that company owned and/or operated maintenance and ground support equipment is operated and maintained in safe and operable condition. All GSE defects to be documented and reported to the GSE mechanic.
  </li>
  <li>
   Responsible to keep up to date with roster change notifications from the AIMs system even on days off.
  </li>
  <li>
   Ensure that all line maintenance areas are kept in a neat and orderly manner at all times.
  </li>
  <li>
   Will be required to act on behalf of Line Supervisor or Line Manager as required.
  </li>
  <li>
   Inputting of all relevant aircraft Tech Log and Work Order information including component changes into the TRAX computer maintenance program
   <br/>
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Your Profile:
  <br/>
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Must have a minimum of 10 years aircraft maintenance experience, excluding apprenticeship or basic training.
  </li>
  <li>
   Must be a licensed, certifying, and company-approved B2 Avionics engineer, preferably on the Boeing Aircraft
  </li>
  <li>
   Must be able to communicate assertively, effectively and diplomatically with flight crew, flight dispatchers, ground handling personnel and senior management, as required.
  </li>
  <li>
   Valid EASA Part 66 Aircraft Maintenance License or ICAO Type 2 License, with endorsement in Boeing 767 Aircraft.
   <br/>
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Our Offer:
  <br/>
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Strong career support in an international environment.
  </li>
  <li>
   Great culture and colleagues.
  </li>
  <li>
   Multifarious benefit program.
   <br/>
   <br/>
   <br/>
  </li>
 </ul>
 Do you see a personal challenge in these versatile and responsible tasks? Then apply now!
 <br/>
 <br/>
 <strong>
  We look forward to receiving your application!
 </strong>
</div>


B2 Licensed Engineer

<div><p><b>Title:</b></p>
AFCAP V: UAE SWA Transient Aircraft Services Technician (Secret Clearance)<p></p><div><p><b>
Belong, Connect, Grow</b><b>, with</b><b> </b><b>KBR!</b></p></div><p></p><div><p><b><br>
Program Summary</b></p></div><div><p>
KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p></div><p></p><div><p><b>
Job Summary</b></p></div><div><p>
The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p></div><div><p>
This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p></div><p></p><div><p><b>
Roles and Responsibilities</b></p></div><div><div><ul><li><p>
Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</p></li></ul></div><div><ul><li><p>
Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</p></li></ul></div><div><ul><li><p>
Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</p></li></ul></div><div><ul><li><p>
Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</p></li></ul></div><div><ul><li><p>
Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</p></li></ul></div><div><ul><li><p>
Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</p></li></ul></div><div><ul><li><p>
Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</p></li></ul></div><div><ul><li><p>
Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</p></li></ul></div><div><ul><li><p>
Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</p></li></ul></div><div><ul><li><p>
Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</p></li></ul></div><div><ul><li><p>
Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</p></li></ul></div><div><ul><li><p>
Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</p></li></ul></div><div><ul><li><p>
Assist in maintaining cleanliness and organization of the flight line and work areas.</p></li></ul></div><div><ul><li><p>
Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</p></li></ul></div><div><ul><li><p>
Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</p></li></ul></div><div><ul><li><p>
Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</p></li></ul></div></div><p></p><div><p><b><br>
Basic Qualifications</b></p></div><div><div><ul><li><p>
Must be a U.S. citizen</p></li></ul></div><div><ul><li><p>
Ability to obtain/maintain a SECRET clearance</p></li></ul></div><div><ul><li><p>
Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</p></li></ul></div><div><ul><li><p>
Minimum 3&ndash;5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</p></li></ul></div><div><ul><li><p>
Hands-on experience working on a flight line or in aircraft ground operations</p></li></ul></div><p></p><div><p><b>
Basic knowledge of:</b></p></div><div><ul><li><p>
Aircraft marshaling and ground handling procedures</p></li></ul></div><div><ul><li><p>
Flight line safety requirements</p></li></ul></div><div><ul><li><p>
Use of ground support equipment</p></li></ul></div></div><p></p><div><p><b><br>
Preferred Qualifications</b></p></div><div><div><ul><li><p>
Prior experience supporting U.S. Air Force TAS operations</p></li></ul></div><div><ul><li><p>
FAA Airframe &amp; Powerplant (A&amp;P) certification or equivalent military experience</p></li></ul></div><div><ul><li><p>
Familiarity with FOD programs, tool control, and flight line safety compliance</p></li></ul></div><div><ul><li><p>
Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams.</p></li></ul></div><p></p><div><p><b><br>
K</b><b>BR Benefits</b></p></div><div><p>
KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&amp;D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p></div></div></div><p></p>

AFCAP V: UAE SWA Transient Aircraft Services Technician (Secret Clearance)

<div><p><b>Title:</b></p>
AFCAP V: Kuwait SWA Transient Aircraft Services Technician (Secret Clearance)<p></p><div><p><b>
Belong, Connect, Grow</b><b>, with</b><b> </b><b>KBR!</b></p></div><p></p><div><p><b><br>
Program Summary</b></p></div><div><p>
KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p></div><p></p><div><p><b>
Job Summary</b></p></div><div><p>
The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p></div><div><p>
This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p></div><p></p><div><p><b>
Roles and Responsibilities</b></p></div><div><div><ul><li><p>
Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</p></li></ul></div><div><ul><li><p>
Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</p></li></ul></div><div><ul><li><p>
Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</p></li></ul></div><div><ul><li><p>
Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</p></li></ul></div><div><ul><li><p>
Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</p></li></ul></div><div><ul><li><p>
Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</p></li></ul></div><div><ul><li><p>
Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</p></li></ul></div><div><ul><li><p>
Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</p></li></ul></div><div><ul><li><p>
Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</p></li></ul></div><div><ul><li><p>
Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</p></li></ul></div><div><ul><li><p>
Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</p></li></ul></div><div><ul><li><p>
Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</p></li></ul></div><div><ul><li><p>
Assist in maintaining cleanliness and organization of the flight line and work areas.</p></li></ul></div><div><ul><li><p>
Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</p></li></ul></div><div><ul><li><p>
Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</p></li></ul></div><div><ul><li><p>
Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</p></li></ul></div></div><p></p><div><p><b><br>
Basic Qualifications</b></p></div><div><div><ul><li><p>
Must be a U.S. citizen</p></li></ul></div><div><ul><li><p>
Ability to obtain/maintain a SECRET clearance</p></li></ul></div><div><ul><li><p>
Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</p></li></ul></div><div><ul><li><p>
Minimum 3&ndash;5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</p></li></ul></div><div><ul><li><p>
Hands-on experience working on a flight line or in aircraft ground operations</p></li></ul></div><p></p><div><p><b>
Basic knowledge of:</b></p></div><div><ul><li><p>
Aircraft marshaling and ground handling procedures</p></li></ul></div><div><ul><li><p>
Flight line safety requirements</p></li></ul></div><div><ul><li><p>
Use of ground support equipment</p></li></ul></div></div><p></p><div><p><b><br>
Preferred Qualifications</b></p></div><div><div><ul><li><p>
Prior experience supporting U.S. Air Force TAS operations</p></li></ul></div><div><ul><li><p>
FAA Airframe &amp; Powerplant (A&amp;P) certification or equivalent military experience</p></li></ul></div><div><ul><li><p>
Familiarity with FOD programs, tool control, and flight line safety compliance</p></li></ul></div><div><ul><li><p>
Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams.</p></li></ul></div><p></p><div><p><b><br>
K</b><b>BR Benefits</b></p></div><div><p>
KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&amp;D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p></div></div></div><p></p>

AFCAP V: Kuwait SWA Transient Aircraft Services Technician (Secret Clearance)

<div>
 <strong>
  The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P)
 </strong>
 services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.
 <br/>
 <br/>
 <ul>
  <li>
   A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.
  </li>
  <li>
   Seven (7) years&rsquo; experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12/King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.
  </li>
  <li>
   US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.
  </li>
  <li>
   Operationally checks repaired or modified systems for proper operation.
  </li>
  <li>
   Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.
  </li>
  <li>
   Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
  </li>
  <li>
   Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks.
  </li>
  <li>
   Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.
  </li>
  <li>
   Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft.
  </li>
  <li>
   Disassemble and inspect parts for wear, warping, or other defects.
  </li>
  <li>
   Repair or replace defective engine parts and reassembles and installs engine in aircraft.
  </li>
  <li>
   Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
  </li>
  <li>
   May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.
  </li>
  <li>
   Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders.
  </li>
  <li>
   Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.
  </li>
  <li>
   Ability to read, write, and interpret technical duties is required.
  </li>
  <li>
   Ability to communicate effectively with all levels of employees throughout the organization.
  </li>
  <li>
   May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies.
  </li>
  <li>
   Perform other qualified duties as assigned.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Minimum Requirements
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   High school diploma or GED equivalent is Required.
  </li>
  <li>
   A valid (FAA) A&amp;P Certificate is Required.
  </li>
  <li>
   Seven (7) years&rsquo; experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12/King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.
  </li>
  <li>
   Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.
  </li>
  <li>
   Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.
  </li>
  <li>
   Six (6) months of flight line and overhaul &amp; inspection experience is preferred.
  </li>
  <li>
   Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.
  </li>
  <li>
   Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait).
  </li>
  <li>
   A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.
  </li>
  <li>
   Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.
  </li>
  <li>
   May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  (AR95-20) Mechanic Pre-employment Medical Requirements:
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Security Clearance Requirements:
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Physical And Additional Qualifications
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.
   <br/>
   <br/>
  </li>
 </ul>
 Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.
 <br/>
 <br/>
 <ul>
  <li>
   Must be able to climb stairs, ramps, ladders and work stands.
  </li>
  <li>
   Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.
  </li>
  <li>
   May be required to carry, push or pull up to and may exceed 50 pounds.
  </li>
  <li>
   May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.
  </li>
  <li>
   May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.
  </li>
  <li>
   Must be able to type using a standard keyboard to communicate through e-mail and various software applications.
  </li>
  <li>
   Must be able to distinguish color and judge three dimensional depths.
  </li>
  <li>
   May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.
  </li>
  <li>
   Must have minimum 20/100 near and far vision, correctable to 20/20.
  </li>
  <li>
   Must be capable of living and working in a potentially hostile environment for an extended period.
  </li>
  <li>
   May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Compensation Details:
  <br/>
  <br/>
 </strong>
 41.89
 <br/>
 <br/>
 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.
 <br/>
 <br/>
 <strong>
  Benefits Overview:
  <br/>
  <br/>
 </strong>
 Our health and welfare benefits are designed to support you and your priorities. Offerings include:
 <br/>
 <br/>
 <ul>
  <li>
   Health, dental, and vision insurance
  </li>
  <li>
   Paid time off and holidays
  </li>
  <li>
   Retirement benefits (including 401(k) matching)
  </li>
  <li>
   Educational reimbursement
  </li>
  <li>
   Parental leave
  </li>
  <li>
   Employee stock purchase plan
  </li>
  <li>
   Tax-saving options
  </li>
  <li>
   Disability and life insurance
  </li>
  <li>
   Pet insurance
   <br/>
   <br/>
  </li>
 </ul>
 <em>
  Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.
  <br/>
  <br/>
 </em>
 <strong>
  Original Posting:
  <br/>
  <br/>
 </strong>
 06/10/2026 - Until Filled
 <br/>
 <br/>
 Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.
 <br/>
 <br/>
 Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.
</div>


C-12/King Air Army Transport Aircraft Mechanic (FAA A&P)  Kuwait

Search 10000+ Aircraft maintenance support jobs near you this June. New roles added regularly across leading industries. Apply today.