aircraft technician iii

<div></div><div><div>Overview
</div><div>To perform moderately complex aircraft maintenance and repair in accordance with applicable technical orders, standards, regulations, and job guides.<br>
Perform O, I and D Level when its applicable.<br>
<br>
1. Follow the day-to-day operations related to own job to ensure continuity of work.
<br>
2. Inspect, troubleshoot, service, and maintain large and highly complex aircraft systems, components and related aerospace equipment.<br>
3. Perform highly multifaceted aircraft and component inspections to ensure they are working properly. Interpret inspection findings and determine adequacy of corrective actions.<br>
4. Inspect and identify major aircraft corrosion in order to repair it and identify reasons for it for future prevention purposes.<br>
5. Conduct functional tests of components and systems to ensure they are have been repaired properly and problems have been addressed.<br>
6. Review maintenance data collection reports to determine trends and production effectiveness.<br>
7. Provide on-the-job training and coaching to junior and senior technicians to support their overall development.
<br>
8. When maintenance problems are encountered, act as a technical expert/ advisor to ensure the timely resolution of issues and minimization of downtime. Elevate issues that cannot be resolved at his/her level.<br>
9. Operate and maintain arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft carrier take-off and landing operations.
<br>
10. Test and maintain launch and recovery equipment to ensure they are working appropriately.
<br>
11. Maintain logs of airplane launches, recoveries, and equipment maintenance.<br>
12. Perform inspections on aircraft before launch and after recovery and provide signoff on flyable condition when all airworthiness requirements are met.<br>
13. Operate all Ground Support Equipment (GSE) as required to service aircraft while on ground.<br>
14. Identify maintenance and troubleshooting requirements during aircraft recovery.<br>
15. Prepare multifaceted statements and reports (e.g., deficiency reports, maintenance analysis documents, technical data changes, and equipment records) timely and accurately to meet GAL and departmental requirements, policies and standards.<br>
16. Comply with all relevant safety, quality and environmental management policies, procedures and controls to ensure a healthy and safe work environment.<br>
17. Follow all relevant departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.<br>
18. Perform other related duties or assignments as directed.
</div><div></div><div>Nationality
</div><div>No Restriction
</div><div></div><div>Qualification
 </div><div><div>Minimum Qualification:
<br>
 <br>
Bachelor, Higher diploma or diploma or skill level 7 or 9 certified in respective trade, QC or Traing the Trainer.<br>
<br>
 Military aircraft experience letter or equivalent.<br>
</div>
</div><div></div><div>Experience
 </div><div>Minimum of 8 &ndash; 10 years of experience within maintenance operations area at an Airbase.<br>
<br>
 Knowledge of aircraft launching and recovering processes<br>
<br>
 Knowledge of basic maintenance processes and procedures<br>
<br>
 Understanding of aircraft structure, components, troubleshooting, wiring system and functions. Etc.</div></div><div></div>

Aircraft Technician III

<div><p><b>Title:</b></p>
AFCAP V: Kuwait SWA Transient Aircraft Services Technician (Secret Clearance)<p></p><div><p><b>
Belong, Connect, Grow</b><b>, with</b><b> </b><b>KBR!</b></p></div><p></p><div><p><b><br>
Program Summary</b></p></div><div><p>
KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p></div><p></p><div><p><b>
Job Summary</b></p></div><div><p>
The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p></div><div><p>
This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p></div><p></p><div><p><b>
Roles and Responsibilities</b></p></div><div><div><ul><li><p>
Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</p></li></ul></div><div><ul><li><p>
Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</p></li></ul></div><div><ul><li><p>
Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</p></li></ul></div><div><ul><li><p>
Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</p></li></ul></div><div><ul><li><p>
Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</p></li></ul></div><div><ul><li><p>
Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</p></li></ul></div><div><ul><li><p>
Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</p></li></ul></div><div><ul><li><p>
Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</p></li></ul></div><div><ul><li><p>
Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</p></li></ul></div><div><ul><li><p>
Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</p></li></ul></div><div><ul><li><p>
Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</p></li></ul></div><div><ul><li><p>
Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</p></li></ul></div><div><ul><li><p>
Assist in maintaining cleanliness and organization of the flight line and work areas.</p></li></ul></div><div><ul><li><p>
Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</p></li></ul></div><div><ul><li><p>
Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</p></li></ul></div><div><ul><li><p>
Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</p></li></ul></div></div><p></p><div><p><b><br>
Basic Qualifications</b></p></div><div><div><ul><li><p>
Must be a U.S. citizen</p></li></ul></div><div><ul><li><p>
Ability to obtain/maintain a SECRET clearance</p></li></ul></div><div><ul><li><p>
Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</p></li></ul></div><div><ul><li><p>
Minimum 3&ndash;5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</p></li></ul></div><div><ul><li><p>
Hands-on experience working on a flight line or in aircraft ground operations</p></li></ul></div><p></p><div><p><b>
Basic knowledge of:</b></p></div><div><ul><li><p>
Aircraft marshaling and ground handling procedures</p></li></ul></div><div><ul><li><p>
Flight line safety requirements</p></li></ul></div><div><ul><li><p>
Use of ground support equipment</p></li></ul></div></div><p></p><div><p><b><br>
Preferred Qualifications</b></p></div><div><div><ul><li><p>
Prior experience supporting U.S. Air Force TAS operations</p></li></ul></div><div><ul><li><p>
FAA Airframe &amp; Powerplant (A&amp;P) certification or equivalent military experience</p></li></ul></div><div><ul><li><p>
Familiarity with FOD programs, tool control, and flight line safety compliance</p></li></ul></div><div><ul><li><p>
Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams.</p></li></ul></div><p></p><div><p><b><br>
K</b><b>BR Benefits</b></p></div><div><p>
KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&amp;D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p></div></div></div><p></p>

AFCAP V: Kuwait SWA Transient Aircraft Services Technician (Secret Clearance)

Blue Horizon Services & Oil Field Maintenance LLC

<p>Job Summary</p><p>The Lead PAUT Technician is responsible for planning, coordinating, and executing advanced non-destructive testing (NDT) inspections using Phased Array Ultrasonic Testing (PAUT) techniques on piping, pressure vessels, storage tanks, structural components, and welded joints. The role includes leading inspection teams, ensuring compliance with project specifications and international standards, and delivering accurate inspection reports.</p><p>Key Responsibilities</p><ul><li>Perform and supervise PAUT inspections on welds, piping, pressure vessels, storage tanks, and structural components.</li><li>Lead a team of PAUT and NDT technicians during project execution.</li><li>Develop and review PAUT scan plans, inspection procedures, and techniques.</li><li>Interpret and evaluate inspection data in accordance with applicable codes and standards.</li><li>Prepare inspection reports, data sheets, and technical documentation.</li><li>Ensure all inspections are conducted in compliance with client specifications, project requirements, and applicable industry standards.</li><li>Coordinate with clients, project engineers, QA/QC personnel, and site representatives.</li><li>Verify calibration and proper functioning of PAUT equipment and software.</li><li>Provide technical guidance, mentoring, and training to junior technicians.</li><li>Ensure compliance with HSE policies, procedures, and safe work practices.</li><li>Participate in project planning, manpower allocation, and resource management.</li><li>Support audits, client meetings, and technical reviews when required.</li></ul><p>Qualifications</p><ul><li>Diploma or Degree in Engineering, Science, or a related technical discipline.</li><li>Valid PCN, ASNT, or equivalent certification in PAUT (Level II/III).</li><li>Additional certifications in UT, TOFD, MT, PT, VT, or RT are preferred.</li><li>Certification in accordance with client requirements (e.g., ADNOC, Aramco, or major oil &amp; gas operators) is an advantage.</li></ul><p>Experience</p><ul><li>Minimum 5-8 years of NDT experience in the oil and gas industry.</li><li>Minimum 3&ndash;5 years of experience in PAUT inspection and team leadership.</li><li>Experience with refinery, petrochemical, power plant, and offshore projects.</li><li>Familiarity with international codes and standards such as ASME, API, AWS, and ISO.</li></ul><p>Skills &amp; Competencies</p><ul><li>Strong knowledge of PAUT principles, data analysis, and defect characterization.</li><li>Proficiency in using PAUT equipment and analysis software.</li><li>Leadership and team management skills.</li><li>Excellent report writing and communication skills.</li><li>Ability to interpret engineering drawings, welding procedures, and inspection requirements.</li><li>Strong problem-solving and decision-making abilities.</li><li>Ability to work under pressure and meet project deadlines.</li></ul><p>Preferred Certifications</p><ul><li>PCN/ASNT PAUT Level II or III</li><li>TOFD Level II</li><li>UT Level II</li><li>API 510, API 570, or API 653 (preferred)</li><li>H2S, BOSIET, HUET, and offshore certifications (for offshore projects)</li></ul><p>Pay: AED4,500.00 - AED6,000.00 per month</p><p>Work Location: In person</p>

Lead PAUT

<div></div><div><div>Overview
</div><div>Performs scheduled and unscheduled aircraft electrical systems maintenance. Carries out directives from the Supervisor in support of the maintenance team and unit operations.<br>
Will also be responsible for<br>
1. Perform inspection, repair, troubleshooting, and testing of aircraft and equipment electrical systems in accordance with applicable technical publications, applicable regulations, and company and local policies and procedures. Assists in ensuring aircraft and equipment are maintained in a high state of mission readiness.<br>
2. Complete all forms, records, and documents recording aircraft maintenance activities in accordance with DA PAM 738-751, applicable technical publications, applicable regulations, and company and local policies and procedures.<br>
3. Impart the knowledge of duties and responsibilities in such a manner (advice, support, and On the Job Training to customer trainees) to permit assimilation into the workforce; the final aim being to enable the customer's technicians to attain gradual full capacity to carry out self sufficient aircraft electrical repair capability.<br>
4. Carry out all assigned tasks by the Supervisor in support of the maintenance team and unit operations.
</div><div></div><div>Nationality
</div><div>No Restriction
</div><div></div><div>Qualification
 </div><div><div>-Federal Communications Commission (FCC) license or industry equivalent. High School Diploma, Graduation from military or commercial aircraft maintenance school or course required.<br>
<ul><li>Must be able to attain a UAE Driving License.</li></ul></div>
</div><div></div><div>Experience
 </div><div>-Minimum of 6 Years Aircraft Avionic or Electrician - Aviation Maintenance<br>
<ul><li>Minimum of 3Years Electrical repair on aircraft type.</li><li>Must have thorough knowledge in the use of common tools, special tools, test equipment, and aviation ground support equipment used in performing maintenance on the relevant aircraft.</li></ul></div></div><div></div>

Avionics Technician - 2nd Line Armament/ Electrical

<div></div><div><div>Overview
</div><div>To perform aircraft avionics maintenance and repair tasks under close supervision as instructed in a timely and efficient manner in accordance with applicable standards and regulations.<br>
Perform O, I and D Level when its applicable.<br>
<br>
1. Follow the day-to-day operations related to own job to ensure continuity of work.
<br>
2. Perform routine tasks related to inspection, troubleshooting, servicing and maintaining less complex avionics aircraft systems, components and related equipment.<br>
3. Assemble and disassemble parts prior to and post maintenance according to the standard procedures and report any malfunction to supervisor.<br>
4. Adjust frequencies of radio sets by signaling ground station and turning setscrews.<br>
5. Assist in checking components for clearances, tolerances, proper installation, and operation.<br>
6. Perform tasks related maintaining basic launch and recovery equipment to ensure they are working appropriately.
<br>
7. Perform tasks related to installing and maintaining visual landing aids as instructed and according to adopted procedures.<br>
8. Assist in maintaining logs of airplane launches, recoveries, and equipment maintenance.<br>
9. Perform tasks related to identifying maintenance and troubleshooting requirements for avionics parts and equipment during aircraft recovery.<br>
10. Comply with all relevant safety, quality and environmental management policies, procedures and controls to ensure a healthy and safe work environment.<br>
11. Follow all relevant departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.<br>
12. Perform other related duties or assignments as directed.
</div><div></div><div>Nationality
</div><div>No Restriction
</div><div></div><div>Qualification
 </div><div><div>Minimum Qualification:<br>
<br>
 <br>
<br>
Bachelor, Higher Diploma or diploma or skill level 5 certified in respective trade.<br>
</div>
</div><div></div><div>Experience
 </div><div>Minimum of 3 &ndash; 5 years of experience within maintenance operations area at an Airbase.<br>
<br>
 Knowledge of aircraft launching and recovering processes<br>
<br>
 Knowledge of basic maintenance processes and procedures<br>
<br>
 Understanding of aircraft structure, components, troubleshooting, wiring system and functions. Etc.</div></div><div></div>

Aircraft Technician I

<div></div><div><div>Overview
</div><div>To lead large and highly complex aircraft components maintenance and repair and overhaul such as flight control and hydraulics in a timely manner and inspect the execution of the repair and maintenance tasks to ensure adherence to technical orders, standards and regulations.<br>
Perform O, I and D Level when its applicable.<br>
<br>
1. Follow the day-to-day operations related to own job to ensure continuity of work.<br>
2. Ensure daily production targets are achieved<br>
3. Adjust, repair or replace defective components based on analysis of test results, following blueprints, schematics, handbooks, and other technical documents, using hand tools, special tools, and test equipment.<br>
4. Examine and inspect calibration on installed or repaired equipment to prescribed specifications and ensure performance of task based on standard procedure.<br>
5. Add Test flight control components and hydraulics under simulated or actual operating conditions to determine performance and airworthiness, using test equipment, such as oscilloscopes, digital meters and counters, and circuit analysers.<br>
6. Lead scheduled service and maintenance tasks on components and advice on problems maintaining, servicing, and inspecting components and related aircraft equipment.<br>
7. Lead unscheduled maintenance, repair and troubleshooting tasks assigned to aircraft systems, components, and related equipment and ensure the right implementation of procedures.<br>
8. Examine and test repaired components and systems according to standards and procedures and approve the process before signing off.<br>
9. Review and inspect maintenance forms, aircraft records, automated maintenance data systems, and historical reports as required to ensure complete documentation and sign of for the supervisor&rsquo;s approval.<br>
10. Report findings to supervisor and issues to supervisor and collaborate with the supervisor to assess the problem and lead the implementation of the adopted solution and ensure proper execution in performing tasks.<br>
11. Initiate deficiency reports, maintenance analysis documents, technical data changes, and equipment records.<br>
12. Record information on data collection forms and automated systems under request of supervisor and when required ensure preparation of timely and accurate status reports.<br>
13. Provide accurate status reports on daily maintenance activities to supervisor.<br>
14. Provide on-the-job training and coaching to technicians and senior technicians on basic and complex tasks and procedures to support their development.<br>
15. Act as a technical expert of components technician&rsquo;s team in addressing complex components maintenance issues by illustrating the right procedure to address the issues to ensure quality maintenance and repair operations.<br>
16. Comply with all relevant safety, quality and environmental management policies, procedures and controls to ensure a healthy and safe work environment.<br>
17. Adhere to company Quality management system (QMS) Safety Management System (SMS) and local occupational health and safety regulation.<br>
18. Follow all relevant departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.<br>
19. Perform other related duties or assignments as directed.
</div><div></div><div>Nationality
</div><div>No Restriction
</div><div></div><div>Qualification
 </div><div><div>Minimum Qualification:<br>
<br>
 <br>
<br>
Bachelor, Higher diploma or diploma or skill level 7 or 9 certified in respective trade, QC or Traing the Trainer.<br>
<br>
 Military aircraft experience letter or equivalent.<br>
</div>
</div><div></div><div>Experience
 </div><div>Minimum of 8 &ndash; 10 years of experience within maintenance operations area at an Airbase.<br>
<br>
 Knowledge of aircraft launching and recovering processes<br>
<br>
 Knowledge of basic maintenance processes and procedures<br>
<br>
 Understanding of aircraft structure, components, troubleshooting, wiring system and functions. Etc.</div></div><div></div>

Workshop Technician III

Serco

<div><p><b>Instructor - Air Frame &amp; Power Plant</b><br>
<b>Impact a better future</b></p><p><b>
Serco:
</b></p><p>At Serco, we bring together the right people, technology, and partners to deliver innovative solutions that impact a better future.</p><p></p><p><br>
We have been operating in the Middle East since 1947 and have a profound understanding of the region.</p><p></p><p><br>
With over 4,500 colleagues here, we support governments across defence, space, transport, emergency services, justice and migration, and other vital public services. Our core capabilities span service design and advisory, customer experience, complex programme management, systems integration, and asset and facilities management, alongside environmental and case management services.</p><p></p><p><br>
Guided by our unique service model, we work together with clients and partners to achieve long-term visions and tackle some of the world&rsquo;s most complex challenges.</p><p></p><p><br>
We&rsquo;re different because we do.</p><p><br>
<br>
Your Opportunity
</p><p>The instructor will conduct, and assist in the development of, maintenance training programs to enhance the skills of trainees. The instructor will conduct a platform and other instruction with trainee assessment and will provide remedial training where necessary. The instructor will review/amend course material in order to ensure training effectiveness. S/he will also maintain records of training activities and of student attendance.</p><p></p><p><br>
Must be able to communicate well with others, instill a teamwork mentality, and lead by example.</p><p></p><p><br>
Key Accountabilities</p><ul><li><p>
Perform instruction on aircraft maintenance fundamentals, safety, inspection, technical publications, aircraft systems and components, aviation regulations and other related topics.</p></li><li><p>
Work with course developers, providing the necessary technical information and guidance.</p></li><li><p>
Review, assist in the development of, and/or revise courses using the systems approach (SAT or ADDIE).</p></li><li><p>
Prepare program syllabi detailing maintenance courses which will be conducted to produce employees qualified to perform aircraft maintenance.</p></li><li><p>
Prepare classes in support of specific platform and other syllabi. Classes should be planned to cater for trainees with varying degrees of subject matter knowledge</p></li><li><p>
Conduct desired classroom and platform instruction as required. Classes should be presented in such a fashion that learning is progressive and effective.</p></li><li><p>
Perform intermediate and terminal assessments to determine the extent to which learning is taking place. Each assessment shall be documented to maintain accountability and to assist in recognizing any trends in those areas where obstacles to training exist.</p></li><li><p>
Review assessment reports and course evaluations to amend training courses, as necessary, to ensure effectiveness of training.</p></li><li><p>
Maintain trainee records, and collaborate with other Instructors.</p></li><li><p>
Perform any other duties as assigned by the Training Supervisor or Manager.</p></li></ul><p></p><p><br>
Specific Requirements</p><ul><li><p>
Instructor will have a minimum of three (3) years experience teaching technical (maintenance) material with a related aircraft/engine/major component manufacturer, or within a military/civilian aircraft maintenance organization.</p></li><li><p>
Instructor will have a minimum of eight (8) years practical experience in the required discipline (A&amp;P or Avionics) with a demonstrated aptitude for instructing.</p></li><li><p>
Prior experience working with military aviation units is preferred</p></li><li>
Proven technical experience on air platforms from one of the following nations - UAE, US, Australia and/or South Korea</li><li><p>
Knowledge of, and experience in, training methodologies and management utilizing a systems approach (SAT or ADDIE) is highly desirable</p></li><li><p>
Civilian aircraft maintenance licence or certificate, e.g. (Mechanical) A&amp;P certificate or B1 licence</p></li><li><p>
Bachelor&rsquo;s degree in an aircraft maintenance discipline (Airframe/Powerplant; Electrical/Avionics; Aircraft Maintenance technology) is highly desirable.</p></li><li><p>
Instructional techniques /&lsquo;Train-the-Trainer&rsquo; certificate and/or acceptance/ approval/certification by a civilian/military agency/organization is highly desirable</p></li></ul><p></p><p><br>
Join Us</p><p>
At Serco, we believe there is a place here for everyone. A place where you can bring your authentic self to work every day. Our workplace culture is one that embraces diversity and fosters equity, respect, and belonging for every individual. We are committed to equal employment opportunities and creating an inclusive environment that proudly celebrates the perspectives and backgrounds that each of our employees bring to work every day.</p><p></p><p><br>
Join Serco and be part of a values-driven organization that invests in the development and well-being of its employees and offers a rewarding and fulfilling career.</p><p></p><p><br>
Serco is committed to Equal Employment Opportunities and is committed to ensuring the safety of all of its employees through its Zero Harm initiative. Please visit <b>careers.serco.com</b> for more information.</p></div>

Instructor - Air Frame & Power Plant

Explore 33+ Aircraft technician iii in Abu Dhabi this June. Find roles across top companies and apply now to boost your career.