fire fighting technician Jobs in The Center For Astrophysics And Space Science Jobs In Abu Dhabi United Arab Emirates

fire fighting technician

maintenance technician Jobs in The Center For Astrophysics And Space Science Jobs In Abu Dhabi United Arab Emirates

maintenance technician

environmental technician Jobs in The Center For Astrophysics And Space Science Jobs In Abu Dhabi United Arab Emirates

environmental technician

hvac technician Jobs in The Center For Astrophysics And Space Science Jobs In Abu Dhabi United Arab Emirates

hvac technician

mechanic - aviation maintenance Jobs in The Center For Astrophysics And Space Science Jobs In Abu Dhabi United Arab Emirates

mechanic - aviation maintenance

aircraft technician iii

<div></div><div><div>Overview
</div><div>To perform moderately complex aircraft maintenance and repair in accordance with applicable technical orders, standards, regulations, and job guides. Perform O, I and D Level when its applicable.<br>
<br>
1. Follow the day-to-day operations related to own job to ensure continuity of work.
<br>
2. Inspect, troubleshoot, service, and maintain large and highly complex aircraft systems, components and related aerospace equipment.<br>
3. Perform highly multifaceted aircraft and component inspections to ensure they are working properly. Interpret inspection findings and determine adequacy of corrective actions.<br>
4. Inspect and identify major aircraft corrosion in order to repair it and identify reasons for it for future prevention purposes.<br>
5. Conduct functional tests of components and systems to ensure they are have been repaired properly and problems have been addressed.<br>
6. Review maintenance data collection reports to determine trends and production effectiveness.<br>
7. Provide on-the-job training and coaching to junior and senior technicians to support their overall development.
<br>
8. When maintenance problems are encountered, act as a technical expert/ advisor to ensure the timely resolution of issues and minimization of downtime. Elevate issues that cannot be resolved at his/her level.<br>
9. Operate and maintain arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft carrier take-off and landing operations.
<br>
10. Test and maintain launch and recovery equipment to ensure they are working appropriately.
<br>
11. Maintain logs of airplane launches, recoveries, and equipment maintenance.<br>
12. Perform inspections on aircraft before launch and after recovery and provide signoff on flyable condition when all airworthiness requirements are met.<br>
13. Operate all Ground Support Equipment (GSE) as required to service aircraft while on ground.<br>
14. Identify maintenance and troubleshooting requirements during aircraft recovery.<br>
15. Prepare multifaceted statements and reports (e.g., deficiency reports, maintenance analysis documents, technical data changes, and equipment records) timely and accurately to meet GAL and departmental requirements, policies and standards.<br>
16. Comply with all relevant safety, quality and environmental management policies, procedures and controls to ensure a healthy and safe work environment.<br>
17. Follow all relevant departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.<br>
18. Perform other related duties or assignments as directed.
</div><div></div><div>Nationality
</div><div>No Restriction
</div><div></div><div>Qualification
 </div><div><div>Minimum Qualification:<br>
<br>
 <br>
<br>
Technical diploma or skill level 7 or 9 certified in respective trade, QC or Train the Trainer.<br>
<br>
 Military aircraft experience letter or equivalent.<br>
</div>
</div><div></div><div>Experience
 </div><div>Minimum of 8 &ndash; 10 years of experience within maintenance operations area at an Airbase.<br>
<br>
 Knowledge of aircraft launching and recovering processes<br>
<br>
 Knowledge of basic maintenance processes and procedures<br>
<br>
 Understanding of aircraft structure, components, troubleshooting, wiring system and functions. Etc.</div></div><div></div>

Aircraft Technician III

RoyalJet

Overview <p><b>Aircraft Cabin Maintenance Technician</b> role at <b>RoyalJet</b> - based in Abu Dhabi, UAE.</p><p>RoyalJet is looking for someone dynamic to join our expanding team in Abu Dhabi (UAE). We are seeking passionate aviation experts for the <b>Aircraft Cabin Maintenance Technician</b> position. If you meet the criteria, please apply so we can connect with you to discuss your future.</p> Responsibilities <ul><li>Perform routine and non-routine aircraft maintenance tasks as directed by a Certifying Licensed Engineer, Aircraft Cabin maintenance technician and duty Supervisor</li><li>Ensure you are fully conversant with the tasks allocated and seek guidance when needed</li><li>Adhere to all pertinent procedures and safety precautions</li><li>Safekeep the tool kit provided by the company</li><li>Perform other tasks reasonably requested by the Licensed Aircraft Engineer, Aircraft Cabin maintenance technician & duty Supervisor</li><li>Carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing safety procedures and manufacturer/company regulations; this may include cabin general visual inspections</li><li>Carry out component changes as necessary as part of the troubleshooting process; use and comply with manufacturer reference manuals for removal, installation, servicing/testing procedures and to ensure correct materials</li><li>Effectively use specialized tooling or test equipment required for checking, testing, replacement or servicing of a system or component</li><li>Comply with airport authority regulations regarding driving and aircraft movements if required, including safe movement around aircraft on the ramp/in base and understanding road signs and markings</li><li>Maintain tools and equipment in the workplace and conduct safe working practices at all times</li></ul> Qualifications <ul><li>Minimum of 5 years' experience in Aircraft Maintenance as an Aircraft Cabin Mechanic, preferably in a VVIP Maintenance environment</li><li>A formal technical qualification in basic Aircraft Maintenance</li><li>Aviation and aircraft training courses on at least one Royal Jet operated aircraft or similar type (B737 or Global 5000)</li><li>Experience on Royal Jet operated aircraft (B737 or Global 5000)</li><li>Experience with VVIP Maintenance Environment</li><li>Experience with large carrier/maintenance organization</li><li>Solid technical background</li></ul> Seniority / Employment details <ul><li>Seniority level: Mid-Senior level</li><li>Employment type: Full-time</li><li>Job function: Engineering and Information Technology</li><li>Industries: Airlines and Aviation</li></ul><p>Referrals increase your chances of interviewing at RoyalJet.</p>

Aircraft Cabin Maintenance Technician

EDGE

<p>Location: Abu Dhabi, United Arab Emirates</p> Responsibilities <ul><li>Support UAS Maintenance Quality Assurance: Support the Technician Supervisor(s) by performing maintenance activities to high quality and keeping work areas clean. In order to ensure that performed work meets the ADASI defined quality standards and that work areas are safe.</li><li>Support Flight Operation Activities: Support Field Operations and Test/Training Flight activities when needed.</li><li>Support to Exhibitions and Deployments: Provide Support and contribute to exhibition and various deployment preparations</li><li>UAS Maintenance: Carry out UAS maintenance work performed by maintenance teams, following the specifications as issued in the Work Orders, ensuring that task are carried out safely and efficiently</li><li>Assurance of Standard Working Procedure: Ensure that all UAS Maintenance of all UAS maintenance - Repair and integration work is performed per the UAS Maintenance Manual</li><li>Other Duties: Carry out other duties as assigned by ADASI Management.</li></ul> Qualifications <ul><li>Minimum requirement of Technical Aviation Diploma or Part 147 B1 Certification or any other equivalent Certification issued by internationally recognized aviation authorities or other Aviation Organizations (Airlines, etc.).</li><li>0-2 years of experience as Aircraft Technician, Aircraft Technician Assistant or Trainee in internationally recognized Aviation Organizations</li><li>Basic Aeronautical and UAS specific knowledge to effectively maintain UAS's as per OEM documentation.</li><li>Basic Knowledge of Standard Aviation Maintenance Procedures.</li><li>Basic Knowledge of Aviation/UAS documentation, documentation structure and standard aviation documentation procedures.</li><li>Basic Knowledge on Trouble Shooting Procedures on UAS.</li><li>Document/report drafting skills.</li><li>Basic MS Office competences to generate technical Reports.</li></ul> Seniority level <ul><li>Entry level</li></ul> Employment type <ul><li>Full-time</li></ul> Job function <ul><li>Management and Manufacturing</li></ul> Industries <ul><li>Defense and Space Manufacturing</li></ul>

Maintenance Technician

<div></div><div><div>Overview
</div><div>Performs scheduled and unscheduled aircraft maintenance tasks. Carries out directives from the Supervisor in support of the maintenance team and unit operations. Install, inspect, test, adjust, or repair avionics equipment.<br>
<br>
Will also be responsible to:<br>
<br>
1. Perform inspection, repair, troubleshooting, and servicing of aircraft and equipment in accordance with applicable technical publications, applicable regulations, and company and local policies and procedures. Assists in ensuring aircraft and equipment are maintained in a high state of mission readiness.<br>
2. Complete all forms, records, and documents recording aircraft maintenance activities in accordance with DA PAM 738-751, applicable technical publications, applicable regulations, and company and local policies and procedures.<br>
3. Impart the knowledge of duties and responsibilities in such a manner (advice support and OJT training) to permit assimilation of the customer's trainees; the final aim being to enable the customer's technicians to attain gradual full capacity to carry out maintenance.<br>
4. Carry out all assigned tasks by the Supervisor in support of the maintenance team and unit operations.
</div><div></div><div>Nationality
</div><div>No Restriction
</div><div></div><div>Qualification
 </div><div><div>- Minimum High School or relevant recognized technical certifications and diplomas in the same field.<br>
<ul><li>Approved Aviation Maintenance Technician School Certificate (FAA) is required for Non-National or equivalent.</li></ul></div>
</div><div></div><div>Experience
 </div><div>- Minimum 0-3 Yrs. experience in aircraft Maintenance Operations or as deemed suitable and sufficient by the technical screening/evaluation committee represented by customer and GAL technical assessors.<br>
<ul><li>Fresh graduates UAE Nationals with no experience undergoing (structured On-the-Job Training) OJT program</li><li>A good general knowledge of avionics systems and aircraft maintenance inspections services and repairs.</li></ul></div></div><div></div>

Mechanic - 2nd Line Bell 407

<div></div><div><div>Overview
</div><div>To perform aircraft avionics maintenance and repair tasks under close supervision as instructed in a timely and efficient manner in accordance with applicable standards and regulations.<br>
<br>
Will also be responsible for:<br>
<br>
1. Follow the day-to-day operations related to own job to ensure continuity of work.
<br>
2. Perform routine tasks related to inspection, troubleshooting, servicing and maintaining less complex avionics aircraft systems, components and related equipment.<br>
3. Assemble and disassemble parts prior to and post maintenance according to the standard procedures and report any malfunction to supervisor.<br>
4. Adjust frequencies of radio sets by signaling ground station and turning setscrews.<br>
5. Assist in checking components for clearances, tolerances, proper installation, and operation.<br>
6. Aircraft Launch/ Recovery
<br>
7. Perform tasks related maintaining basic launch and recovery equipment to ensure they are working appropriately.
<br>
8. Perform tasks related to installing and maintaining visual landing aids as instructed and according to adopted procedures.<br>
9. Assist in maintaining logs of airplane launches, recoveries, and equipment maintenance.<br>
10. Perform tasks related to identifying maintenance and troubleshooting requirements for avionics parts and equipment during aircraft recovery.<br>
11. Comply with all relevant safety, quality and environmental management policies, procedures and controls to ensure a healthy and safe work environment.<br>
12. Follow all relevant departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.<br>
13. Perform other related duties or assignments as directed.
</div><div></div><div>Nationality
</div><div>No Restriction
</div><div></div><div>Qualification
 </div><div><div>- Technical avionics diploma or skill level 3 certified avionics technician.<br>
</div>
</div><div></div><div>Experience
 </div><div>- Minimum of 3 years experience within jet engines maintenance operations.<br>
<ul><li>Knowledge of aircraft launching and recovering processes</li><li>Knowledge of basic maintenance processes and procedures</li><li>Understanding of jet engine structure, components and functions</li></ul></div></div><div></div>

Aircraft Technician I

<div>
 <strong>
  About ADASI
  <br/>
  <br/>
 </strong>
 ADASI is the regional leader in autonomous systems and services, dedicated to offering holistic solutions &ndash; from the development and production of unmanned systems to joint mission analysis and careful equipment acquisition. ADASI manufactures, operates and maintains next-generation autonomous solutions for air, land and sea &ndash; capable of performing in a diverse range of demanding environments. Leveraging advanced technologies to comply with the tactical demands of the future, ADASI aims to be a world leader in building the next generation of autonomous capabilities.
 <br/>
 <br/>
 <strong>
  Key Responsibilities :
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Support UAS Maintenance Quality Assurance: Support the Technician Supervisor(s) by performing maintenance activities to high quality and keeping work areas clean. In order to ensure that performed work meets the ADASI defined quality standards and that work areas are safe.
  </li>
  <li>
   Support Flight Operation Activities: Support Field Operations and Test/Training Flight activities when needed.
  </li>
  <li>
   Support to Exhibitions and Deployments: Provide Support and contribute to exhibition and various deployment preparations
  </li>
  <li>
   UAS Maintenance : Carry out UAS maintenance work performed by maintenance teams, following the specifications as issued in the Work Orders, ensuring that task are carried out safely and efficiently
  </li>
  <li>
   Assurance of Standard Working Procedure: Ensure that all UAS Maintenance of all UAS maintenance - Repair and integration work is performed per the UAS Maintenance Manual
  </li>
  <li>
   Other Duties: Carry out other duties as assigned by ADASI Management.
   <br/>
   <br/>
  </li>
 </ul>
 Education &amp; Experience:
 <br/>
 <br/>
 <ul>
  <li>
   Minimum requirement of Technical Aviation Diploma or Part 147 B1 Certification or any other equivalent Certification issued by internationally recognized aviation authorities or other Aviation Organizations (Airlines, etc.).
  </li>
  <li>
   0-2 years of experience as Aircraft Technician, Aircraft Technician Assistant or Trainee in internationally recognized Aviation Organizations
  </li>
  <li>
   Basic Aeronautical and UAS specific knowledge to effectively maintain UAS's as per OEM documentation.
  </li>
  <li>
   Basic Knowledge of Standard Aviation Maintenance Procedures.
  </li>
  <li>
   Basic Knowledge of Aviation/UAS documentation, documentation structure and standard aviation documentation procedures.
  </li>
  <li>
   Basic Knowledge on Trouble Shooting Procedures on UAS.
  </li>
  <li>
   Document/report drafting skills.
  </li>
  <li>
   Basic MS Office competences to generate technical Reports.
  </li>
 </ul>
</div>


<div></div><div><div>Overview
</div><div>Technical Inspector is a technical expert for assigned aircraft/workshop and responsible for clearing all the critical unscheduled /scheduled maintenance and repair actions on assigned aircraft/components. Technical Inspector is responsible for the daily &ldquo;by the book&rdquo; maintenance/repair of all relevant aircraft/components and the proper completion of aircraft daily maintenance and historical records.<br>
<br>
1. Review and audit technical records that support airworthiness of all aircraft, aircraft parts/components in accordance with DA Pamphlet 738-751 and TM 1-1500-328-23 and other applicable technical publications.<br>
2. Perform inspection of aircraft and components during their removal, disassembly, assembly, installation and adjustment phases of incorporation onto an aircraft. Ensures the workmanship and materials conform to the aircraft manufacturers specifications and required maintenance manual procedures.
<br>
3. Ensure that all Work-In-Progress is properly documented and that corrective actions used will be recorded in accordance with TAMMS-(A) requirements and approved SOP's.<br>
4. Responsible for all the proper aircraft historical record updates, resulting in no over flights of the component SSL, overhaul or retirement schedule.
<br>
5. Responsible for the timely and accurate execution of all OEM Bulletins, Maintenance and Safety messages.
<br>
6. Responsible for the submission of the Product Quality Deficiency Reports when required and for the Quality Control assistance during all the aircraft incidents and accidents.<br>
7. Responsible for the proper Quality Control oversight of all aircraft modifications for the relevant aircraft as required.
<br>
8. Test tightness of airframe connections with hand tools and utilizes flashlight and mirror to inspect fit of parts.
<br>
9. Determine accuracy of installation of aircraft components in using protractor, micrometer, calipers, and gauges to ensure that specified tolerances are met.<br>
10. Perform duties of Quality Control Supervisor in his absence, and any other duty appointed by his superiors.
<br>
11. Perform Scheduled facility audits for safety and policy compliance.<br>
12. Perform QC duties away from base on temporary duty if required.
<br>
13. Report any irregularities in daily standard practices used that would cause injury to personnel or deems the aircraft unsafe or non-airworthy and advises QC Supervisor in the evaluation of maintenance actions performed.
<br>
14. Comply with all the company's SOP.
<br>
15. Review aircraft records to determine discrepancy trends and specific problem areas.<br>
16. Prepare necessary correspondence, technical reports, contract documents and status reports as per customer requirements.
<br>
17. Monitor and evaluate the aircraft equipment and components, maintenance processes and usage to determine root causes of failures and, based on findings, recommend relevant procedural changes, processing and usage limitation.<br>
18. Comply with all relevant safety, quality and environmental management policies, procedures and controls to ensure a healthy and safe work environment.<br>
19. Follow all relevant departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.<br>
20. Perform other related duties or assignments as directed.
</div><div></div><div>Nationality
</div><div>No Restriction
</div><div></div><div>Qualification
 </div><div><div>Minimum Qualification:<br>
<br>
 <br>
<br>
Diploma in Aircraft Maintenance or equivalent.<br>
<br>
 A&amp;P License or AS / AA degree in aviation related studies is preferred.<br>
</div>
</div><div></div><div>Experience
 </div><div>Minimum of 6 - 8 years of experience in an aviation field as A&amp;P Mechanic<br>
<br>
 Must have fixed wing and/or rotary wing quality control experience.<br>
<br>
 Aviation Unit Maintenance (AVUM). Aviation Intermediate Maintenance (AVIM) preferred.<br>
<br>
 Quality Control experience on aircraft modifications preferred.<br>
<br>
 Extensive TAMMS-(A) experience preferred.</div></div><div></div>

Technical Inspector

Explore 146+ Aircraft technician iii in The Center For Astrophysics And Space Science Jobs In Abu Dhabi United Arab Emirates this November. Find roles across top companies and apply now to boost your career.

146 aircraft technician iii jobs IN The Center For Astrophysics And Space Science Jobs In Abu Dhabi United Arab Emirates

Aircraft Technician III

Aircraft Cabin Maintenance Technician

Maintenance Technician

Mechanic - 2nd Line Bell 407

Aircraft Technician I

Maintenance Technician

Technical Inspector