aircraft technician

Emirates

<div>
 <strong>
  Job Purpose
  <br/>
  <br/>
 </strong>
 At Base Maintenance, our expert engineers deliver unparalleled service for all aircraft checks, from comprehensive inspections to major system repairs. We handle cabin retrofits, aircraft deliveries, and detailed inspection programs for Airbus A380, A350 and Boeing 777.
 <br/>
 <br/>
 Our team excels in timely, cost-effective solutions for A &amp; C checks, engine change, and landing gear changes, along with unscheduled maintenance and pre-service checks.
 <br/>
 <br/>
 As an Aircraft Technician you will be, responsible for carrying out maintenance tasks on Emirates and third party aircraft components in accordance with company procedures and regulations. The Aircraft Technician works as part of a team under the direction and guidance of the assigned Licensed Aircraft Engineer within the appropriate trade/cross trade disciplines for which they have been trained
 <br/>
 <br/>
 <strong>
  In This Role You Will
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Carry out routine aircraft/engine/component servicing/ maintenance and/or approved structural repairs compliant to manufacturers procedures whilst observing all safety procedures for fluid replenishment, aircraft refuelling, aircraft systems charging/servicing as required.
  </li>
  <li>
   Complete any component replacement and other maintenance activities as directed by immediate Supervisor. This will include the ability to obtain and understand Aircraft Maintenance Manual (AMM), Illustrated Parts catalogue (IPC), Component Maintenance Manual (CMM) or other approved documentation required to carry out the task.
  </li>
  <li>
   Assist Licensed Aircraft Engineers in trouble shooting, defect rectifications and carrying out modifications while also performing instructions contained in job card.
  </li>
  <li>
   Participate and promote in creating a safety culture in an effort to minimise accidents and highlight any deficiencies/failures that can lead to such accidents. Ensure all work locations are kept clean and maintain excellent housekeeping. This includes being aware and communicating safety shortfalls.
  </li>
  <li>
   Maintain vigilance in ensuring work areas (including the ramp), vehicles, stands, lockers are free of FOD and that toolboxes are regularly audited, maintained and kept clean.
  </li>
  <li>
   Responsible to maintain knowledge of airport safety regulations including holding and maintaining an Airport Driving Permit. Should be fully conversant and compliant with airport manoeuvring area requirements.
  </li>
  <li>
   Be responsible for managing performance by working closely with supervisor on performance management processes, using My BC system to agree on development plans including training and development requirements.
  </li>
  <li>
   Ensure prompt attendance to all allocated tasks with the intent to maximise ground time and avoid operational delays/disruptions. This includes obtaining aircraft/component status brief from Licensed Aircraft Engineer (LAE), reports and preparing work accordingly. Communicate any aircraft/ component/structural defects to the LAE in a timely manner and ensure relevant information is during shift handovers.
  </li>
  <li>
   As and when required, use current knowledge and experience in aircraft maintenance to assist in Resource allocation using RMS / RTC.
   <br/>
   <br/>
  </li>
 </ul>
 Qualification
 <br/>
 <br/>
 <strong>
  To be considered for the role you must meet the below requirements:
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Experience: 5+ Years in aircraft maintenance environment
  </li>
  <li>
   Qualification: 12 + 2
  </li>
  <li>
   Knowledge/skills: Apprenticeship in Aircraft Maintenance or equivalent training with a reputable airline or an approved aircraft maintenance organisation or Engineering Aircraft Maintenance License.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Details Of Safety Sensitive Role
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Working at height Yes
  </li>
  <li>
   Exposure to hazardous energy systems Yes
  </li>
  <li>
   Heavy lifting Yes
  </li>
  <li>
   Working in areas with motorised mobile equipment Yes
  </li>
  <li>
   Work in confined spaces Yes
  </li>
  <li>
   Contact with contaminations materials (Humans/Animals/Chemicals Yes
  </li>
  <li>
   Contact with dangerous good Yes
  </li>
  <li>
   Work in an extremely noisy environment Yes
  </li>
  <li>
   Work in heat Yes
  </li>
  <li>
   Working with pressurised substances Yes
  </li>
  <li>
   Exposure to fixed protruding sharp objects Yes
  </li>
  <li>
   Exposure to contact with moving/falling objects Yes
  </li>
  <li>
   Airport driving permit Yes
  </li>
  <li>
   Safety Sensitive: Yes
  </li>
  <li>
   PSMP: Yes
   <br/>
   <br/>
  </li>
 </ul>
 Salary &amp; benefits
 <br/>
 <br/>
 Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry, including discounts on flights and hotels stays around the world.
 <br/>
 <br/>
 Find out what it&rsquo;s like to live and work in our fast-paced, cosmopolitan home city in the Dubai Lifestyle section of our website www.emirates.com/careers
</div>


Aircraft Technician

Airbus Helicopters

<div>
 <strong>
  <strong>
   Job Description:
   <br/>
   <br/>
  </strong>
 </strong>
 <strong>
  <strong>
   JOB SUMMARY:
   <br/>
   <br/>
  </strong>
 </strong>
 The Aircraft Engine Technician will be responsible to ensure optimal service support for maintenance to achieve the excellent fleet availability with highest quality and safety standards. The Aircraft Engine Technician will also be responsible to perform detailed inspection, assembly, installation, repair or replacement of the aircraft engines (engine, blades, dynamic component) and maintenance (both scheduled and unscheduled). The Aircraft Engine Technician will perform OJT on location as required.
 <br/>
 <br/>
 <strong>
  <strong>
   LIST OF RESPONSIBILITIES:
   <br/>
   <br/>
  </strong>
 </strong>
 <ul>
  <li>
   Comply with all Aviation, Safety, Quality and Export Control Regulations and Procedures
  </li>
  <li>
   Comply with all Airbus Helicopters Management Systems, Policies and Regulations
  </li>
  <li>
   Work as part of a team, specific duties will include the satisfactory performance of both scheduled and unscheduled maintenance of the helicopter fleet, within a customer environment
  </li>
  <li>
   Undertake individually or as part of a team, aircraft maintenance, repair and inspection tasks, quality checks and the completion of documentation in accordance with Company and Customer procedures
  </li>
  <li>
   Check every time before to start any maintenance activity tools/GSE&acute;s for condition and expiration date, and ensure their correct use
  </li>
  <li>
   Check every time before starting any maintenance activity the components and parts for conditions (damages, leaks etc.) and that the applicability of the documentation is correct
  </li>
  <li>
   Determine and perform maintenance requirements for parts, clearances, tolerance, fuel and hydraulic leaks and corrosion damage
  </li>
  <li>
   Interpret wiring diagrams, blueprints and technical publication
  </li>
  <li>
   Determine repair procedures necessary to correct defective equipment
  </li>
  <li>
   Solve maintenance problems, achieves proper operating deficiency of components such as rotor heads, engine and engine modules
  </li>
  <li>
   Diagnose reoccurring malfunctions and recommend corrective action by initiation or material deficiency reports
  </li>
  <li>
   Perform repair of components (engine, blades, dynamic component)
  </li>
  <li>
   Ensure that all work performed is recorded on the appropriate paperwork and signed for on a progressive basis
  </li>
  <li>
   Ensure the correct use and control of aircraft parts and materials
  </li>
  <li>
   Perform duties as assigned by the Site Manager, ensuring that all work is completed in a timely fashion and meets the delivery quality requirements of the Airbus
  </li>
  <li>
   Evaluate performance of assigned customer&rsquo;s personnel
  </li>
  <li>
   Conduct on-the-job training activity
  </li>
  <li>
   Train personnel on the use of maintenance manuals
  </li>
  <li>
   Train personnel in all safety directives and FOD procedures
   <br/>
   <br/>
  </li>
 </ul>
 This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company&rsquo;s success, reputation and sustainable growth.
 <br/>
 <br/>
 <strong>
  <strong>
   <strong>
    <strong>
     Company:
     <br/>
     <br/>
    </strong>
   </strong>
  </strong>
 </strong>
 Airbus Helicopters Arabia for Aircraft Maintenance
 <br/>
 <br/>
 <strong>
  Employment Type:
  <br/>
  <br/>
 </strong>
 Fixed term
 <br/>
 <br/>
 <strong>
  Experience Level:
  <br/>
  <br/>
 </strong>
 Professional
 <br/>
 <br/>
 <strong>
  Job Family:
  <br/>
  <br/>
 </strong>
 Dynamic component assembly
 <br/>
 <br/>
 By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.
 <br/>
 <br/>
 Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.
 <br/>
 <br/>
 Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com .
 <br/>
 <br/>
 At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.
</div>


Aircraft Engine Technician

Flightcheck Commercial Aviation Services

<div>
 <p>
  <strong>
   Flightcheck Commercial Aviation
  </strong>
  was founded in 2004 and is now one of the largest Commercial Line Maintenance providers. We provide technical handling, aircraft de-icing and limited ground handling for over 25 Domestic and International Airlines
  <strong>
   . Flightcheck provides workplace stability, Flexible Schedules, Affordable Comprehensive Benefits as well as development and training opportunities for you to grow your career with us!
  </strong>
 </p>
 <p>
  We are currently seeking exceptional individuals to join our
  <strong>
   Aircraft Maintenance Technician
  </strong>
  team at
  <strong>
   Charleston International Airport(CHS)!
  </strong>
 </p>
 <p>
  <em>
   The Aircraft Maintenance Technician will perform aircraft line maintenance activities in accordance with company, FAA, other regulatory, and customer standards. Responsible for accomplishing unscheduled/scheduled maintenance; to include, troubleshooting engines, landing gear, hydraulic systems, airframes, electrical systems, and oxygen systems. Remove and replace various system components, as required.
  </em>
 </p>
 <p>
  <strong>
   What we offer:
  </strong>
 </p>
 <ul>
  <li>
   <strong>
    Pay from $33-$47 per hour- Based on experience
   </strong>
  </li>
  <li>
   <strong>
    $5,000 sign-on bonus (For full-time opportunities only!)
   </strong>
  </li>
  <li>
   <strong>
    Full comprehensive and affordable benefits plans (Medical, Dental, Vision)
   </strong>
  </li>
  <li>
   <strong>
    401k with a company match
   </strong>
  </li>
  <li>
   <strong>
    Paid time off- 80 hours(accrued)
   </strong>
  </li>
  <li>
   <strong>
    Flexible schedules- Full and Part-Time opportunities available
   </strong>
  </li>
  <li>
   <strong>
    Family oriented culture
   </strong>
  </li>
  <li>
   <strong>
    In-house certification opportunities
   </strong>
  </li>
  <li>
   <strong>
    Stable work environment with continuous development and training opportunities to help you grow your career with us!
   </strong>
  </li>
 </ul>
 <p>
  <strong>
   Duties and Responsibilities:
  </strong>
 </p>
 <ul>
  <li>
   Perform all aircraft maintenance activities in accordance with Flightcheck&rsquo;s RSM, QCM, customers&rsquo; procedures, FARs, and all other applicable rules and regulations
  </li>
  <li>
   Accomplish job functions to the highest safety, quality, reliable, and efficient standards
  </li>
  <li>
   Complete aircraft maintenance work assignments to the highest standards to ensure aircraft airworthiness
  </li>
  <li>
   Able to read, interpret, and comply with all aircraft maintenance manuals and other maintenance documents to complete work assignments
  </li>
  <li>
   Must be customer service-oriented
  </li>
  <li>
   Ensure all company, customer, and regulatory documents are complete and accurate
  </li>
  <li>
   Properly use and operate support equipment in performance of assigned duties, i.e., servicing units, jacks, lifts, calibrated tooling, etc
  </li>
  <li>
   Occasional travel
  </li>
  <li>
   Perform other duties as they are assigned
  </li>
 </ul>
 <p>
  <strong>
   Requirements:
  </strong>
 </p>
 <ul>
  <li>
   <strong>
    Must
   </strong>
   have a High School Diploma or GED equivalent
  </li>
  <li>
   <strong>
    Must
   </strong>
   have Airframe and Powerplant License
  </li>
  <li>
   <strong>
    Must
   </strong>
   have a minimum of 2-3 years of experience
  </li>
  <li>
   <strong>
    Must
   </strong>
   have a valid A&amp;P and State Driver&rsquo;s License
  </li>
  <li>
   <strong>
    Must
   </strong>
   be able to read, write and understand English and the ability to interpret technical data and special operating instructions
  </li>
  <li>
   <strong>
    Must
   </strong>
   be able to lift and move up to 70 pounds
  </li>
  <li>
   <strong>
    Must
   </strong>
   be able to pass background check and pre-employment drug screening
  </li>
  <li>
   <strong>
    Must
   </strong>
   be able to climb ladders ranging from 6 to 10 feet tall
  </li>
 </ul>
 <p>
  <strong>
   Preferred, but not required:
  </strong>
 </p>
 <ul>
  <li>
   CRJ200/700/900
  </li>
  <li>
   EMB-175/190
  </li>
  <li>
   B737NG
  </li>
  <li>
   A319/320/321
  </li>
  <li>
   B757
  </li>
 </ul>
 <p>
  <strong>
   Workplace environment:
  </strong>
 </p>
 <ul>
  <li>
   <strong>
    Schedule - Full-Time
   </strong>
  </li>
  <li>
   Potential exposure to fumes or airborne particles, toxic chemicals, and moving mechanical parts
  </li>
  <li>
   Occasionally exposed to wet and/or humid conditions and extreme heat
  </li>
  <li>
   The noise level in the work environment is typically loud
  </li>
 </ul>
 <p>
  <em>
   <strong>
    FlightCheck is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
   </strong>
  </em>
 </p>
</div>


Aircraft Maintenance Technician- A&P Mechanic

The ePlane Company

<div><div><div><div><div><div>Chennai, Tamil Nadu
<div>Work Type: Full Time
</div></div></div><div>
</div></div></div></div><div><div><div><b>Job Summary</b></div><br>
<div></div><ul><li>
The Aircraft Maintenance Technician/ Diploma Trainee will play a crucial role in the maintenance for ground &amp; flight testing of our Aircrafts within our state-of-the-art testing facility. We are looking for highly motivated and dedicated AME&rsquo;s/ Diploma Trainee (Electrical engineering) to join our company as Aircraft Maintenance Technician/ Diploma Trainee. The AME&rsquo;s will support the maintenance, inspection, installation, and testing of next-generation electric Vertical Take-Off and Landing (eVTOL) aircraft. The role provides hands-on exposure to electric propulsion systems, batteries, avionics, wiring, and ground test vehicle (GTV) operations, under the supervision of experts.</li></ul><div></div><div><b><br>
Key Responsibilities</b></div><ul><li>
Perform inspection, maintenance, and repair of critical components like motors &amp; propellers.</li><li>
Carry out installation, inspection, maintenance and troubleshooting of high-voltage circuits, battery systems and electric propulsion interfaces.</li><li>
Maintain and inspect electrical wiring interconnection systems (EWIS), including routing, bonding, grounding, clamping, and protection.</li><li>
Perform continuity, insulation resistance, and functional checks using approved test equipment.</li><li>
Install, inspect, and maintain avionics systems including:</li><li>
Flight control and actuation systems.</li><li>
Navigation, communication, and sensor systems.</li><li>
Integrated vehicle management and monitoring systems.</li><li>
Conduct system integration checks, functional tests, and troubleshooting activities.</li><li>
Support software loading, configuration verification, and system validation under approved procedures.</li><li>
Maintain accurate documentation of findings and corrective actions.</li><li>
Lead maintenance and readiness activities for Ground Test Vehicles (GTVs) and prototype aircrafts, including pre-test, turn-around test and post-test inspections.</li><li>
Assist in test setup, instrumentation connections, data cable management, and test-area readiness.</li></ul><div></div><div><b><br>
Required Qualifications</b></div><div></div><div><b><br>
Education:</b> AME/ Diploma in Electrical engineering</div><div></div><div><b><br>
Experience:</b> Minimum 1 Year relevant experience in aircraft / Helicopter/ UAV / eVTOL/ advanced aerospace systems maintenance.Knowledge on DGCA requirements is an added advantage.</div><div></div><div><b><br>
Job Location:</b> Thaiyur (Chennai).</div></div></div></div><p></p>

Aircraft Maintenance Technician (Electrical)

Gulf Air

MAIN OBJECTIVES
<br><br>
To carry out tasks as designated by the A/C Maintenance Duty Managers or Aircraft Maintenance Engineers to an acceptable standard of workmanship, and in accordance with aircraft approved documents.
<br><br>
To maintain Company aircrafts in accordance with the approved maintenance schedule using approved methods and procedures.
<br><br>
To support Gulf Air operation at any network station as required in case of AOG recovery or as necessary.
<br><br>
MAIN DUTIES
<br><br>
1.Work with and under the direction of AMDM or AME to carry out Carry out all routine and non-routine maintenance of GF aircraft within the scope of the approval and ‘A' Check routine tasks and non-routine tasks.
<br><br>
2.Perform replacement of components on company's and other operator's aircraft and engines as required.
<br><br>
3.Adhere and comply with aircraft approved maintenance documents procedures when performing any maintenance activities and acquaint self with all the safety related precautions.
<br><br>
4.Make sure that vehicles, equipment's and tools used for aircraft maintenance are in serviceable, clean and safe condition.
<br><br>
5.Report any vehicle accident, faulty equipment or tool to AMDM or AME.
<br><br>
6.Maintain high standard of cleanliness of vehicles, equipment and servicing steps.
<br><br>
7.Assist in positioning and clearing equipment to carry maintenance tasks on aircraft during base check inputs.
<br><br>
8.Make sure that loaned tools and equipment are returned to Tool Stores are clean and in a serviceable condition.
<br><br>
9.Adhere to Airside Safety Rules and Regulations in regard to driving and work area cleanliness.
<br><br>
10.Assist the Engineer in performing and certifying for all routine tasks and non-routine tasks within his scope.
<br><br>
11.Perform Aircraft refueling as required to perform leak check or in preparation for engine ground runs.
<br><br>
12.Carry out aircraft and engine system servicing with Oil, Hydraulic, O2 and N2 as necessary.
<br><br>
13.Assist in performing aircraft towing in accordance with company TIM procedures.
<br><br>
14.Must be able to read and understand aircraft maintenance documentations when performing any maintenance task on the aircraft, and familiarize himself with the tasks, all safety related and precautions issues to avoid personnel injuries or damage aircraft structures and systems.
<br><br>
15.Lead and coordinate with the team of technicians while performing routine tasks and non-routine tasks under the supervision and guidance of AMDM/AME.
<br><br>
16.Purchase an appropriate Tool Kit containing adequate and approved tools required to carry out maintenance task on aircrafts.
<br><br>
EDUCATION & TRAINING
<br><br>
Holder of a valid ICAO Type license, recognized by BCAA and company quality assurance, endorsed with minimum one type rating of the company fleet.
<br><br>
High level of English language fluency speaking, reading and writing.
<br><br>
EXPERIENCE
<br><br>
Minimum 5 years' experience as aircraft Maintenance Technician with minimum of one year as certifying Technician.

AIRCRAFT LICENSED MAINTENANCE TECHNICIAN

Amentum

<div><div><b>The UH-60</b> <b>Aircraft Mechanic AM-2 (UH-60 Army Aviation)</b> performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</div><div><div><div><div><div><div><div><div><div>
<ul>
<li><p>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS <b>UH-60</b> aircraft is Required. (See below for requirements without A&amp;P).</p></li>
<li><p><b>
Valid US Passport and US Citizenship is Required</b> to obtain the NAC-I clearance and for facility access.</p></li>
<li><p>
Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p></li>
<li><p>
Safely prepare aircraft for inspections and maintenance checks and services.</p></li>
<li><p>
Perform scheduled inspections and assist in performing special inspections.</p></li>
<li><p>
Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p></li>
<li><p>
Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p></li>
<li><p>
Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p></li>
<li><p>
Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p></li>
<li><p>
Participate in maintenance test flights and operation checks as required.</p></li>
<li><p>
Perform other duties as requested.</p></li>
</ul>
<p></p><p><b>Minimum Requirements</b>:</p>
<ul>
<li><p>High School Diploma or Equivalent is required.</p></li>
<li><p>
With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS <b>UH-60</b> aircraft is Required.</p></li>
<li><p>
All experience must be within the Five (5) most recent years.</p></li>
<li><p>
Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft<b> </b>experience, and a minimum of Three (3) years on the assigned<b> UH-60</b> Mission Design Series (MDS) is Required.</p></li>
<li><p>
All experience must be within the Six (6) most recent years.</p></li>
<li><p>
U.S. Military Technical school or specialized training course is desired, certification of education level is required.</p></li>
<li><p><b>
A Valid US Passport is Required</b> for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</p></li>
<li><p>
Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</p></li>
<li><p>
Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</p></li>
</ul>
<p></p><p><b>Security Clearance Requirements:</b></p>
<ul><li><p>
Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. <b>US Citizenship is required</b> to obtain a Clearance and for facility credentials/authorization to work at this facility.</p></li></ul>
<p></p>
<p><b>Additional and Preferred Qualifications</b>:</p>
<ul>
<li><p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p></li>
<li><p>
Broad knowledge of aircraft sheet metal/structural modifications and repair.</p></li>
<li><p>
Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p></li>
<li><p>
Working knowledge of technical publications and Logistics Information Systems.</p></li>
<li><p>
Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p></li>
<li><p>
Participate in maintenance test flights and operation checks as required.</p></li>
<li><p>
Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p></li>
<li><p>
The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p></li>
</ul>
<p></p><p><b>Physical Requirements/Working Environment</b></p>
<ul>
<li><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p></li>
<li><p>
Must be able to climb stairs, ramps, ladders, and work stands.</p></li>
<li><p>
Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p></li>
<li><p>
May be required to lift heavy objects whose weight may exceed 50 pounds.</p></li>
<li><p>
Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p></li>
<li><p>
Will handle dirty parts and lubricants.</p></li>
<li><p>
Will be required to wear proper Personal Protective Equipment (PPE).</p></li>
<li><p>
Must be able to pass a Respirator Physical and Fit Test qualification.</p></li>
<li><p>
May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p></li>
<li><p>
Must be able to lift/push/pull minimum of 50 pounds.</p></li>
<li><p>
May work in maintenance shop or outside.</p></li>
<li><p>
Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p></li>
<li><p>
May be exposed to extreme noise from operating equipment.</p></li>
<li><p>
May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></li>
<li><p>
May be expected to work in austere environments and all-weather conditions</p></li></ul></div></div></div></div></div></div></div></div></div><p><br>
</p><p><b>Compensation Details:</b></p>
Not Applicable<p><br>
</p><p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p><p></p><p><b><br>
Benefits Overview:</b></p><p>
Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p><ul>
<li><p>
Health, dental, and vision insurance</p></li>
<li><p>
Paid time off and holidays</p></li>
<li><p>
Retirement benefits (including 401(k) matching)</p></li>
<li><p>
Educational reimbursement</p></li>
<li><p>
Parental leave</p></li>
<li><p>
Employee stock purchase plan</p></li>
<li><p>
Tax-saving options</p></li>
<li><p>
Disability and life insurance</p></li>
<li><p>
Pet insurance</p></li></ul><p></p><p><i><br>
Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</i></p><p><br>
</p><p><b>Original Posting:</b></p>
02/18/2026 - Until Filled<p>
Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p><p><br>
</p><p>Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</p></div>

Aircraft Mechanic II (UH-60) - Buehring, Kuwait

Atlantic Aviation

<div><h2 class="jobSectionHeader"><b>Job Description</b></h2>
<div><h2 class="jobSectionHeader"><b>Why You&rsquo;ll Love This Line Service Technician Job</b></h2>
Did you ever want to work in aviation but didn&rsquo;t know how to break into the industry? Would you like working in a fast-paced environment, often outdoors, around some of the most incredible professionals in aviation? If so, this Line Service Technician position with Atlantic Aviation at<b> BED in Concord, MA</b> may be perfect for you!<br>
<br>
<b>Pay:</b> $21 / hour<br>
<b>Schedule:</b> Requires availability for any/all shifts including overtime, weekends, holidays, and on-call duty. No Overnights!<br>
<br>
In this position, you will provide aviation ground support services to customers in a positive and professional manner. You will perform in all facets of the ground handling operation including but not limited to aircraft fueling/defueling, baggage/cargo handling, aircraft towing, using marshalling signals for aircraft parking, providing lavatory/potable water service, and using other various ground support equipment to help support the needs of customer and their aircraft.<br>
<br>
Build a career in aviation you are excited about and apply for the Line Service Technician job today!</div><h2 class="jobSectionHeader"><b>
Responsibilities</b></h2>
<div><h2 class="jobSectionHeader"><b>Line Service Technician Responsibilities</b></h2><ul><li>
Deliver and receive fuel to and from company tanks, vendor trucks, and aircraft.</li><li>
Operate all company ground support equipment as requested or required, including lavatory and water service carts, ground power unit, deice truck, etc.</li><li>
Perform ground marshalling using standard aviation signals.</li><li>
Perform customer service activities such as helping customers with aircraft scheduling and fueling.</li><li>
Assist with aircraft turning, loading, and unloading.</li><li>
Ensure all buildings and grounds are safe, clean, and organized.</li><li>
Conduct or assists with daily/weekly onsite safety inspections and audits of equipment and facility operations.</li><li>
Occasional travel may be required to support another Atlantic location.</li><li>
You may be occasionally assigned to another Atlantic location based on geographical proximity as business needs require.</li></ul></div><h2 class="jobSectionHeader"><b>
Skills &amp; Qualifications</b></h2>
<div><h2 class="jobSectionHeader"><b>Line Service Technician Qualifications</b></h2><ul><li>
High school diploma or GED certificate</li><li>
18 years of age</li><li>
A valid state driver&rsquo;s license</li><li>
Be comfortable and physically able to work in an environment with frequent walking, stretching, bending, sitting, stooping, reaching, grasping, and climbing.</li><li>
Be physically able to perform heavy lifting on a regular basis up to 50 lbs.</li></ul><div><b>
We maintain a drug-free workplace and perform pre-employment substance testing.</b></div><div>
#airport #lineservice #Concord</div></div></div>

Line Service Technician - Full Time

Search 2927+ Aircraft technician jobs near you this March. New roles added regularly across leading industries. Apply today.