central service tech

IQVIA

<div>Kansas City, United States of America | Part time | Field-based | R1542043</div>
<br><div><h3 class="jobSectionHeader"><b>Job Responsibilities:</b></h3><h2 class="jobSectionHeader"><b>
Mammography System &amp; Gantry Service</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Install, troubleshoot, and repair </b><b>mammography imaging systems</b><b>, including fixed and rotating gantry assemblies.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Diagnose and repair </b><b>mechanical and electromechanical gantry components</b><b>, including:</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Motorized arms and rotational assemblies</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Compression paddles and drive mechanisms</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Bearings, counterbalances, encoders, belts, and lead screws</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Positioning sensors, interlocks, and safety systems</b></h2></li><li><h2 class="jobSectionHeader"><b>
Perform system level fault isolation across </b><b>mechanical, electrical, and software domains</b><b>.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Conduct </b><b>mechanical alignment, motion verification, and system calibration</b><b> in accordance with manufacturer specifications.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Restore system operation following mechanical failure, component wear, or functional misalignment.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Installation &amp; Upgrades</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Support system installations, relocations, and de installations, including:</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Gantry assembly and disassembly</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Mechanical alignment and structural setup</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Post installation functional validation</b></h2></li><li><h2 class="jobSectionHeader"><b>
Perform hardware and software updates following approved service procedures.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Verify system performance after repairs, modifications, or upgrades.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Documentation &amp; Compliance</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Accurately document troubleshooting activities, repairs performed, parts replaced, and system status in service management systems.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Follow applicable </b><b>MQSA, FDA, radiation safety, and internal quality system requirements</b><b>.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Maintain required service records and technical documentation related to imaging equipment repairs.</b></h2></li></ul><h3 class="jobSectionHeader"><b>
Schedule:</b></h3><ul><li><h2 class="jobSectionHeader"><b>
20 hours per week minimum</b></h2></li><li><h2 class="jobSectionHeader"><b>
Regional travel to clinical sites as required by territory assignment.</b></h2></li></ul><h3 class="jobSectionHeader"><b>
Required Qualifications:</b></h3><h2 class="jobSectionHeader"><b>
Education</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Associate degree or higher </b><b>in Biomedical Engineering, Electronics, Mechanical Engineering, Electromechanical Technology</b><b>, or related technical discipline OR equivalent combination of education and relevant field experience.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Experience</b></h2><ul><li><h2 class="jobSectionHeader"><b>
3&ndash;5+ years of hands on</b><b> experience servicing medical imaging equipment or complex electromechanical systems.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Direct experience with </b><b>mammography systems</b><b> or closely related imaging platforms (e.g., X ray, fluoroscopy, C arms, CT gantry assemblies).</b></h2></li><li><h2 class="jobSectionHeader"><b>
Demonstrated experience supporting </b><b>mechanical motion systems,</b><b> rotating assemblies, or precision electromechanical structures.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Technical Skills (Required)</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Strong skills in electromechanical troubleshooting and repair.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Ability to read and interpret </b><b>mechanical drawings, electrical schematics, and OEM service documentation</b><b>.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Proficiency using hand tools, power tools, multimeters, and alignment or calibration equipment.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Ability to safely handle, secure, and align gantry subassemblies during service activities.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Physical and Travel Requirements</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Ability to </b><b>lift and maneuver components up to 70 lbs with</b><b> appropriate assistance.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Ability to stand, bend, kneel, and work around imaging equipment for long periods.</b></h2></li></ul><h3 class="jobSectionHeader"><b>
Preferred Qualifications:</b></h3><ul><li><h2 class="jobSectionHeader"><b>
Prior </b><b>OEM or ISO mammography system experience.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Direct experience with </b><b>gantry alignment, motion control tuning, or compression system servicing.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Experience working in regulated medical device environments.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Background as a </b><b>Field Service Engineer</b><b> supporting diagnostic imaging equipment.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Working knowledge of </b><b>DICOM, PACS, or hospital IT</b><b> interfaces as related to imaging systems.</b></h2></li></ul><h3 class="jobSectionHeader"><b>
Benefits:</b></h3><ul><li><h2 class="jobSectionHeader"><b>
None</b></h2></li></ul><h2 class="jobSectionHeader"><b>
IQVIA</b><b> is a leading global provider of advanced analytics, technology solutions and clinical research services to the life sciences industry. We believe in pushing the boundaries of human science and data science to make the biggest impact possible &ndash; to help our customers create a healthier world. Learn more at </b><b>https://jobs.iqvia.com</b></h2><h2 class="jobSectionHeader"><b>
We are committed to providing equal employment opportunities for all, including veterans and candidates with disabilities. </b><b>https://jobs.iqvia.com/eoe</b></h2><h2 class="jobSectionHeader"><b>
Note: This role is not eligible for visa sponsorship. Candidates must have authorization to work in the US without the need for sponsorship.</b></h2><div>
IQVIA is a leading global provider of clinical research services, commercial insights and healthcare intelligence to the life sciences and healthcare industries. We create intelligent connections to accelerate the development and commercialization of innovative medical treatments to help improve patient outcomes and population health worldwide. Learn more at https://jobs.iqvia.com</div><div>
IQVIA is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other status protected by applicable law. https://jobs.iqvia.com/eoe</div><div>
IQVIA is committed to integrity in our hiring process and maintains a zero tolerance policy for candidate fraud. All information and credentials submitted in your application must be truthful and complete. Any false statements, misrepresentations, or material omissions during the recruitment process will result in immediate disqualification of your application, or termination of employment if discovered later, in accordance with applicable law. We appreciate your honesty and professionalism.</div>
The potential base pay range for this role is $27.00 - $32.00 per hour. The actual base pay offered may vary based on a number of factors including job-related qualifications such as knowledge, skills, education, and experience; location; and/or schedule (full or part-time). Dependent on the position offered, incentive plans, bonuses, and/or other forms of compensation may be offered, in addition to a range of health and welfare and/or other benefits.</div>

MedTech Field Service Engineer - Central

<div>Des Moines, United States of America | Part time | Field-based | R1542043</div>
<br><div><h3 class="jobSectionHeader"><b>Job Responsibilities:</b></h3><h2 class="jobSectionHeader"><b>
Mammography System &amp; Gantry Service</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Install, troubleshoot, and repair </b><b>mammography imaging systems</b><b>, including fixed and rotating gantry assemblies.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Diagnose and repair </b><b>mechanical and electromechanical gantry components</b><b>, including:</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Motorized arms and rotational assemblies</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Compression paddles and drive mechanisms</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Bearings, counterbalances, encoders, belts, and lead screws</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Positioning sensors, interlocks, and safety systems</b></h2></li><li><h2 class="jobSectionHeader"><b>
Perform system level fault isolation across </b><b>mechanical, electrical, and software domains</b><b>.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Conduct </b><b>mechanical alignment, motion verification, and system calibration</b><b> in accordance with manufacturer specifications.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Restore system operation following mechanical failure, component wear, or functional misalignment.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Installation &amp; Upgrades</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Support system installations, relocations, and de installations, including:</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Gantry assembly and disassembly</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Mechanical alignment and structural setup</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Post installation functional validation</b></h2></li><li><h2 class="jobSectionHeader"><b>
Perform hardware and software updates following approved service procedures.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Verify system performance after repairs, modifications, or upgrades.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Documentation &amp; Compliance</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Accurately document troubleshooting activities, repairs performed, parts replaced, and system status in service management systems.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Follow applicable </b><b>MQSA, FDA, radiation safety, and internal quality system requirements</b><b>.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Maintain required service records and technical documentation related to imaging equipment repairs.</b></h2></li></ul><h3 class="jobSectionHeader"><b>
Schedule:</b></h3><ul><li><h2 class="jobSectionHeader"><b>
20 hours per week minimum</b></h2></li><li><h2 class="jobSectionHeader"><b>
Regional travel to clinical sites as required by territory assignment.</b></h2></li></ul><h3 class="jobSectionHeader"><b>
Required Qualifications:</b></h3><h2 class="jobSectionHeader"><b>
Education</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Associate degree or higher </b><b>in Biomedical Engineering, Electronics, Mechanical Engineering, Electromechanical Technology</b><b>, or related technical discipline OR equivalent combination of education and relevant field experience.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Experience</b></h2><ul><li><h2 class="jobSectionHeader"><b>
3&ndash;5+ years of hands on</b><b> experience servicing medical imaging equipment or complex electromechanical systems.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Direct experience with </b><b>mammography systems</b><b> or closely related imaging platforms (e.g., X ray, fluoroscopy, C arms, CT gantry assemblies).</b></h2></li><li><h2 class="jobSectionHeader"><b>
Demonstrated experience supporting </b><b>mechanical motion systems,</b><b> rotating assemblies, or precision electromechanical structures.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Technical Skills (Required)</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Strong skills in electromechanical troubleshooting and repair.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Ability to read and interpret </b><b>mechanical drawings, electrical schematics, and OEM service documentation</b><b>.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Proficiency using hand tools, power tools, multimeters, and alignment or calibration equipment.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Ability to safely handle, secure, and align gantry subassemblies during service activities.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Physical and Travel Requirements</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Ability to </b><b>lift and maneuver components up to 70 lbs with</b><b> appropriate assistance.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Ability to stand, bend, kneel, and work around imaging equipment for long periods.</b></h2></li></ul><h3 class="jobSectionHeader"><b>
Preferred Qualifications:</b></h3><ul><li><h2 class="jobSectionHeader"><b>
Prior </b><b>OEM or ISO mammography system experience.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Direct experience with </b><b>gantry alignment, motion control tuning, or compression system servicing.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Experience working in regulated medical device environments.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Background as a </b><b>Field Service Engineer</b><b> supporting diagnostic imaging equipment.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Working knowledge of </b><b>DICOM, PACS, or hospital IT</b><b> interfaces as related to imaging systems.</b></h2></li></ul><h3 class="jobSectionHeader"><b>
Benefits:</b></h3><ul><li><h2 class="jobSectionHeader"><b>
None</b></h2></li></ul><h2 class="jobSectionHeader"><b>
IQVIA</b><b> is a leading global provider of advanced analytics, technology solutions and clinical research services to the life sciences industry. We believe in pushing the boundaries of human science and data science to make the biggest impact possible &ndash; to help our customers create a healthier world. Learn more at </b><b>https://jobs.iqvia.com</b></h2><h2 class="jobSectionHeader"><b>
We are committed to providing equal employment opportunities for all, including veterans and candidates with disabilities. </b><b>https://jobs.iqvia.com/eoe</b></h2><h2 class="jobSectionHeader"><b>
Note: This role is not eligible for visa sponsorship. Candidates must have authorization to work in the US without the need for sponsorship.</b></h2><div>
IQVIA is a leading global provider of clinical research services, commercial insights and healthcare intelligence to the life sciences and healthcare industries. We create intelligent connections to accelerate the development and commercialization of innovative medical treatments to help improve patient outcomes and population health worldwide. Learn more at https://jobs.iqvia.com</div><div>
IQVIA is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other status protected by applicable law. https://jobs.iqvia.com/eoe</div><div>
IQVIA is committed to integrity in our hiring process and maintains a zero tolerance policy for candidate fraud. All information and credentials submitted in your application must be truthful and complete. Any false statements, misrepresentations, or material omissions during the recruitment process will result in immediate disqualification of your application, or termination of employment if discovered later, in accordance with applicable law. We appreciate your honesty and professionalism.</div>
The potential base pay range for this role is $27.00 - $32.00 per hour. The actual base pay offered may vary based on a number of factors including job-related qualifications such as knowledge, skills, education, and experience; location; and/or schedule (full or part-time). Dependent on the position offered, incentive plans, bonuses, and/or other forms of compensation may be offered, in addition to a range of health and welfare and/or other benefits.</div>

<div>Dallas, United States of America | Part time | Field-based | R1542043</div>
<br><div><h3 class="jobSectionHeader"><b>Job Responsibilities:</b></h3><h2 class="jobSectionHeader"><b>
Mammography System &amp; Gantry Service</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Install, troubleshoot, and repair </b><b>mammography imaging systems</b><b>, including fixed and rotating gantry assemblies.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Diagnose and repair </b><b>mechanical and electromechanical gantry components</b><b>, including:</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Motorized arms and rotational assemblies</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Compression paddles and drive mechanisms</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Bearings, counterbalances, encoders, belts, and lead screws</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Positioning sensors, interlocks, and safety systems</b></h2></li><li><h2 class="jobSectionHeader"><b>
Perform system level fault isolation across </b><b>mechanical, electrical, and software domains</b><b>.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Conduct </b><b>mechanical alignment, motion verification, and system calibration</b><b> in accordance with manufacturer specifications.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Restore system operation following mechanical failure, component wear, or functional misalignment.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Installation &amp; Upgrades</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Support system installations, relocations, and de installations, including:</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Gantry assembly and disassembly</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Mechanical alignment and structural setup</b></h2><h2 class="jobSectionHeader"><b>
o</b><b>Post installation functional validation</b></h2></li><li><h2 class="jobSectionHeader"><b>
Perform hardware and software updates following approved service procedures.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Verify system performance after repairs, modifications, or upgrades.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Documentation &amp; Compliance</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Accurately document troubleshooting activities, repairs performed, parts replaced, and system status in service management systems.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Follow applicable </b><b>MQSA, FDA, radiation safety, and internal quality system requirements</b><b>.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Maintain required service records and technical documentation related to imaging equipment repairs.</b></h2></li></ul><h3 class="jobSectionHeader"><b>
Schedule:</b></h3><ul><li><h2 class="jobSectionHeader"><b>
20 hours per week minimum</b></h2></li><li><h2 class="jobSectionHeader"><b>
Regional travel to clinical sites as required by territory assignment.</b></h2></li></ul><h3 class="jobSectionHeader"><b>
Required Qualifications:</b></h3><h2 class="jobSectionHeader"><b>
Education</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Associate degree or higher </b><b>in Biomedical Engineering, Electronics, Mechanical Engineering, Electromechanical Technology</b><b>, or related technical discipline OR equivalent combination of education and relevant field experience.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Experience</b></h2><ul><li><h2 class="jobSectionHeader"><b>
3&ndash;5+ years of hands on</b><b> experience servicing medical imaging equipment or complex electromechanical systems.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Direct experience with </b><b>mammography systems</b><b> or closely related imaging platforms (e.g., X ray, fluoroscopy, C arms, CT gantry assemblies).</b></h2></li><li><h2 class="jobSectionHeader"><b>
Demonstrated experience supporting </b><b>mechanical motion systems,</b><b> rotating assemblies, or precision electromechanical structures.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Technical Skills (Required)</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Strong skills in electromechanical troubleshooting and repair.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Ability to read and interpret </b><b>mechanical drawings, electrical schematics, and OEM service documentation</b><b>.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Proficiency using hand tools, power tools, multimeters, and alignment or calibration equipment.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Ability to safely handle, secure, and align gantry subassemblies during service activities.</b></h2></li></ul><h2 class="jobSectionHeader"><b>
Physical and Travel Requirements</b></h2><ul><li><h2 class="jobSectionHeader"><b>
Ability to </b><b>lift and maneuver components up to 70 lbs with</b><b> appropriate assistance.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Ability to stand, bend, kneel, and work around imaging equipment for long periods.</b></h2></li></ul><h3 class="jobSectionHeader"><b>
Preferred Qualifications:</b></h3><ul><li><h2 class="jobSectionHeader"><b>
Prior </b><b>OEM or ISO mammography system experience.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Direct experience with </b><b>gantry alignment, motion control tuning, or compression system servicing.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Experience working in regulated medical device environments.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Background as a </b><b>Field Service Engineer</b><b> supporting diagnostic imaging equipment.</b></h2></li><li><h2 class="jobSectionHeader"><b>
Working knowledge of </b><b>DICOM, PACS, or hospital IT</b><b> interfaces as related to imaging systems.</b></h2></li></ul><h3 class="jobSectionHeader"><b>
Benefits:</b></h3><ul><li><h2 class="jobSectionHeader"><b>
None</b></h2></li></ul><h2 class="jobSectionHeader"><b>
IQVIA</b><b> is a leading global provider of advanced analytics, technology solutions and clinical research services to the life sciences industry. We believe in pushing the boundaries of human science and data science to make the biggest impact possible &ndash; to help our customers create a healthier world. Learn more at </b><b>https://jobs.iqvia.com</b></h2><h2 class="jobSectionHeader"><b>
We are committed to providing equal employment opportunities for all, including veterans and candidates with disabilities. </b><b>https://jobs.iqvia.com/eoe</b></h2><h2 class="jobSectionHeader"><b>
Note: This role is not eligible for visa sponsorship. Candidates must have authorization to work in the US without the need for sponsorship.</b></h2><div>
IQVIA is a leading global provider of clinical research services, commercial insights and healthcare intelligence to the life sciences and healthcare industries. We create intelligent connections to accelerate the development and commercialization of innovative medical treatments to help improve patient outcomes and population health worldwide. Learn more at https://jobs.iqvia.com</div><div>
IQVIA is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other status protected by applicable law. https://jobs.iqvia.com/eoe</div><div>
IQVIA is committed to integrity in our hiring process and maintains a zero tolerance policy for candidate fraud. All information and credentials submitted in your application must be truthful and complete. Any false statements, misrepresentations, or material omissions during the recruitment process will result in immediate disqualification of your application, or termination of employment if discovered later, in accordance with applicable law. We appreciate your honesty and professionalism.</div>
The potential base pay range for this role is $27.00 - $32.00 per hour. The actual base pay offered may vary based on a number of factors including job-related qualifications such as knowledge, skills, education, and experience; location; and/or schedule (full or part-time). Dependent on the position offered, incentive plans, bonuses, and/or other forms of compensation may be offered, in addition to a range of health and welfare and/or other benefits.</div>

Baz Solar Consulting LLC

<p>Position Overview:</p><p>As the <b>Solar Service Dispatcher</b>, you&rsquo;ll be the central point of communication between our customers, field technicians, and service managers. You'll coordinate daily schedules, assign work orders, monitor job progress, and ensure timely and efficient responses to service needs.</p><p>Responsibilities:</p><ul><li>Dispatch and coordinate solar service technicians across multiple locations</li><li>Prioritize and schedule service calls based on urgency, location, and availability</li><li>Maintain clear communication with customers and field staff</li><li>Track job status, update systems, and ensure service tickets are completed</li><li>Monitor technician productivity and help optimize routes and scheduling</li><li>Support service team with administrative tasks and customer service follow-up</li></ul><p>Requirements:</p><ul><li>Previous dispatch, scheduling, or coordinator experience (preferred in field services or solar industry)</li><li>Strong organizational and time-management skills</li><li>Excellent communication, both written and verbal</li><li>Tech-savvy &ndash; comfortable with CRM or dispatching software and spreadsheets</li><li>High school diploma or equivalent (Associate&rsquo;s or higher preferred)</li><li>Customer Service Experience (Preferred)</li></ul><p>Pay: $45,000.00 - $52,000.00 per year</p><p>Benefits:</p><ul><li>Dental insurance</li><li>Health insurance</li><li>Paid time off</li><li>Vision insurance</li></ul><p>Work Location: In person</p>

Solar Service Dispatcher

Central Maine Healthcare

<div>Overview:
<ul><li><b>Department: </b>CCUI, Coronary Care Unit Intermediate</li><li><b>
Schedule: </b>Varies, 12-hour shifts</li><li><b>
Facility: </b>Central Maine Medical Center</li><li><b>
Location: </b>Lewiston, ME 04240</li></ul><div></div><div><br>
Central Maine Healthcare is an integrated healthcare delivery system serving 400,000 people living in central, western and Midcoastal Maine. CMH's hospital facilities include Central Maine Medical Center in Lewiston, Bridgton Hospital and Rumford Hospital. CMH also supports Central Maine Medical Group, a primary and specialty care practice organization. Other system services include the Central Maine Heart and Vascular Institute, a regional trauma program, LifeFlight of Maine's southern Maine base, the Central Maine Comprehensive Cancer Center and other high-quality clinical services.</div><br>
<div></div>
Responsibilities:
<div>
The Patient Care Assistant II (PCA II) is a certified person who performs direct care in the department setting. The PCA II maintains a current certification in patient care and is responsible to assist patients with activities of daily living, provides basic nursing care to all patients and assists in maintenance of a safe environment under the direction and supervision of the RN as long as the activity does not distract from primary responsibility for dysrhythmia monitoring.</div>
Qualifications:
<div>
EDUCATION, EXPERIENCE, TRAINING</div><div></div><div><br>
1. High School Diploma or equivalent.</div><div>
2. Current Certification in Patient Care required (M.A. / CNA / EMT / Paramedic / Patient Care Tech, etc.).</div><div>
3. Current Dysrhythmia Interpretation Certificate upon hire and maintain current preferred.</div><div>
4. Current BLS (AHA) within 30 days of hire and maintain current</div><div>
5. Six months previous experience as Monitor Technician, preferred.</div><div>
6. Current Phlebotomy certification upon hire, preferred.</div><div>
7. Current EKG certification upon hire, preferred.</div><div>
8. Possesses knowledge of Medical Terminology.</div><div>
9. Minimum six months previous experience in an acute care hospital or physician&rsquo;s office, preferred.</div>
Employment Status: Per Diem Shift: Variable Equal Employment Opportunity:
<div>
Company is an equal employment opportunity employer. Company prohibits discrimination against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age (subject to applicable law), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Know Your Rights: https://www.eeoc.gov/sites/default/files/2022-10/EEOC_KnowYourRights_screen_reader_10_20.pdf</div><div></div><div><br>
#LI-RT1</div></div><div></div>

Patient Care Assistant II CNA - Coronary Care Unit Intermediate

<div>Overview:
<ul><li><b>Department: </b>Rehabilitation</li><li><b>
Schedule: </b>Varies, 12-hour shifts</li><li><b>
Facility: </b>Central Maine Medical Center</li><li><b>
Location: </b>Lewiston, ME 04240</li></ul><div>
Central Maine Healthcare is an integrated healthcare delivery system serving 400,000 people living in central, western and Midcoastal Maine. CMH's hospital facilities include Central Maine Medical Center in Lewiston, Bridgton Hospital and Rumford Hospital. CMH also supports Central Maine Medical Group, a primary and specialty care practice organization. Other system services include the Central Maine Heart and Vascular Institute, a regional trauma program, LifeFlight of Maine's southern Maine base, the Central Maine Comprehensive Cancer Center and other high-quality clinical services.</div><br>
<div></div>
Responsibilities:
<div>
The Patient Care Assistant II (PCA II) is a certified person who performs direct care in the department setting. The PCA II maintains a current certification in patient care and is responsible to assist patients with activities of daily living, provides basic nursing care to all patients and assists in maintenance of a safe environment under the direction and supervision of the RN as long as the activity does not distract from primary responsibility for dysrhythmia monitoring.</div>
Qualifications:
<div>
EDUCATION, EXPERIENCE, TRAINING</div><div></div><div><br>
1. High School Diploma or equivalent.</div><div>
2. Current Certification in Patient Care required (M.A. / CNA / EMT / Paramedic / Patient Care Tech, etc.).</div><div>
3. Current Dysrhythmia Interpretation Certificate upon hire and maintain current preferred.</div><div>
4. Current BLS (AHA) within 30 days of hire and maintain current</div><div>
5. Six months previous experience as Monitor Technician, preferred.</div><div>
6. Current Phlebotomy certification upon hire, preferred.</div><div>
7. Current EKG certification upon hire, preferred.</div><div>
8. Possesses knowledge of Medical Terminology.</div><div>
9. Minimum six months previous experience in an acute care hospital or physician&rsquo;s office, preferred.</div>
Employment Status: Per Diem Shift: Variable Equal Employment Opportunity:
<div>
Company is an equal employment opportunity employer. Company prohibits discrimination against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age (subject to applicable law), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Know Your Rights: https://www.eeoc.gov/sites/default/files/2022-10/EEOC_KnowYourRights_screen_reader_10_20.pdf</div><div></div><div><br>
#LI-RT1</div></div>

Patient Care Assistant II CNA - Rehabilitation

<b>Overview:</b><br>
<b>Department:</b> Peri Anesthesia - Surgical Services - PACU
<br><br>
<b>Schedule:</b> Full-Time, Day Shift
<br><br>
<b>Hospital:</b> Central Maine Medical Center
<br><br>
<b>Location:</b> Lewiston, ME
<br><br>
Central Maine Healthcare is an integrated healthcare delivery system serving 400,000 people living in central, western and Midcoastal Maine. CMH's hospital facilities include Central Maine Medical Center in Lewiston, Bridgton Hospital and Rumford Hospital. CMH also supports Central Maine Medical Group, a primary and specialty care practice organization. Other system services include the Central Maine Heart and Vascular Institute, a regional trauma program, LifeFlight of Maine's southern Maine base, the Central Maine Comprehensive Cancer Center and other high-quality clinical services.
<br><br>
<b>Responsibilities:</b><br>
The Patient Care Assistant II (PCA II) is a certified person who performs direct care in the department setting. The PCA II maintains a current certification in patient care and is responsible to assist patients with activities of daily living, provides basic nursing care to all patients and assists in maintenance of a safe environment under the direction and supervision of the RN as long as the activity does not distract from primary responsibility for dysrhythmia monitoring.
<br><br>
<b>Qualifications:</b><br>
EDUCATION, EXPERIENCE, TRAINING
<br><br>
1. High School Diploma or equivalent.
<br><br>
2. Current Certification in Patient Care required (M.A. / CNA / EMT / Paramedic / Patient Care Tech, etc.).
<br><br>
3. Current Dysrhythmia Interpretation Certificate upon hire and maintain current preferred.
<br><br>
4. Current BLS (AHA) within 30 days of hire and maintain current
<br><br>
5. Six months previous experience as Monitor Technician, preferred.
<br><br>
6. Current Phlebotomy certification upon hire, preferred.
<br><br>
7. Current EKG certification upon hire, preferred.
<br><br>
8. Possesses knowledge of Medical Terminology.
<br><br>
9. Minimum six months previous experience in an acute care hospital or physician’s office, preferred.
<br><br>
<b>Employment Status:</b> Full Time Shift: Days Equal Employment Opportunity:
<br><br>
Company is an equal employment opportunity employer. Company prohibits discrimination against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age (subject to applicable law), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Know Your Rights: https://www.eeoc.gov/sites/default/files/2022-10/EEOC_KnowYourRights_screen_reader_10_20.pdf

Patient Care Assistant CNA - PACU - Same Day Surgery - Peri-Anesthesia

Search 10000+ Central service tech jobs near you this May. New roles added regularly across leading industries. Apply today.

10000 central service tech jobs Near Me

MedTech Field Service Engineer - Central

MedTech Field Service Engineer - Central

MedTech Field Service Engineer - Central

Solar Service Dispatcher

Patient Care Assistant II CNA - Coronary Care Unit Intermediate

Patient Care Assistant II CNA - Rehabilitation

Patient Care Assistant CNA - PACU - Same Day Surgery - Peri-Anesthesia