chief electrician

Nabors Industries

The Electrician works as a member of the engineering team. This team, consisting of the Mechanic, Electrician, Motorman (where appropriate), and Welder, work under the supervision and direction of the Toolpusher. As such, it is imperative that each member of the team be a self-starter and willing to assist the other worker in the performance of the job when requested to do so.
<br>4-7 years experience with equipment similar to that used on the rig being assigned to, with a minimum of 12 months experience with drive systems, if the rig is so equipped, is preferred. Experience with USCG regulations on the electrical systems and wiring requirements if the assigned rig is a MODU classed unit. Ability to wear respiratory protective devices. LICENSURE/CERTIFICATE REQUIRED: STOP for Supervisor Program
<br>The Electrician is also responsible for the simple repair and general maintenance of the following areas of the rig: 1. Deck Equipment a. Leg depth indicator b. A.C. motors that drive; 1. Elevator motor units (jacking) 2. Skidder gear unit (longitude and transvers 3. Raw water tour gear unit 4. Raw water pump c. Electric cranes and controls 2. Drilling Equipment a. Electrical brake b. Drilling equipment control console c. Mud pump control console d. A.C. motors that drive: 1. Draw-works clutch and brake cooling pump 2. Crane 3. Draw-works drive blower 4. Rotary table drive blower 5. Rig floor hydraulic power unit 6. Bulk air compressor 7. Mud mixer 8. Hopper pump 9. Shale shaker 10. Degasser pump 11. Accumulator unit 12. Desander pump 13. D.C. motors that drive: a. Draw-works b. Rotary table c. Top Drive 3. Engine Room a. A.C. motors that drive: 1. Saltwater pump system 2. Non portable water pump system 3. Oil pump system 4. Air compressor system 5. Vent exhaust and supply fans b. Bus, control circuits and individual feeders c. Switchboard d. A.D. generators e. Motor generator set f. SCR system g. Tachometer generator h. Engine alarm system i. Battery charger j. Ventilation system 4. Living Quarters a. Marine range b. Fry range
<br><div>Nabors is a leading provider of advanced technology for the energy industry. With operations in about 20 countries, Nabors has established a global network of people, technology and equipment to deploy solutions that deliver safe, efficient and responsible hydrocarbon production. By leveraging its core competencies, particularly in drilling, engineering, automation, data science and manufacturing, Nabors aims to innovate the future of energy and enable the transition to a lower carbon world.<br>
<div></div><br>
<div><b>Equal Opportunity Employer<br>
</b></div><div></div><br>
<div>Nabors is committed to providing equal employment opportunities to all employees and applicants and prohibiting discrimination and harassment of any type without regard to race, religion, age, color, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.&amp;nbsp; This applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training.&amp;nbsp; To learn more about our Fair Employment practices, please refer to the Nabors Code of Conduct .</div></div>

CHIEF ELECTRICIAN

Mystic Cruises

<div><h3 class="jobSectionHeader"><b>Description</b></h3><div><br>
We are seeking an experienced Chief Electrician to join one of our cruise ships - vessel TBC. Embarkation June 2026. The contract duration is 3 months (+/- 1 month).</div><div>
<br>
Candidates must have proven experience in this role, hold all valid certificates, and be able to provide strong references/recommendations.<br>
</div><div><b>Position Summary</b></div><div>
<ul><li>Responsible for the safe operation, maintenance, upkeep, diagnosis, installations, repair and testing of all electrical equipment onboard to the highest degree of safety and performance in accordance with Company Policies and in compliance with Public Health, any National or International standards or any other prescribed regulations.</li></ul>
<ul><li>Manages electrical team.</li></ul>
<ul><li>Ensures proper coordination with different technical parties and departments.</li></ul>
</div><div><b>Reporting Structure</b></div><div>
<ul><li>Reporting to the Chief Engineer.</li></ul>
<ul><li>Functional reporting to Hotel Director for all electrical Hotel Department matters.</li></ul>
<ul><li>Subordinates &ndash; ETO, 1st Electrician, 2nd Electricians and Assistant Electrician.</li></ul>
</div><div><b>Safety Duties:</b></div><div>
<ul><li>Participates in crew safety drills according to instructions.</li></ul>
<ul><li>Must always comply with the Company&rsquo;s safety and pollution prevention regulations and operating procedures.</li></ul>
<ul><li>Leads by example by taking care of Health and Safety of self and others.</li></ul>
<ul><li>Ensures that all work equipment, personal protective equipment, chemicals and safety devices are being used correctly. Delivering training, guidance and supervision on how to use and maintain them where necessary.</li></ul>
</div><div><b>Education/Experience/Qualifications:</b></div><div>
<ul><li>Valid STCW95 certification.</li></ul>
<ul><li>Valid CoC A-III/6 including HV certificate.</li></ul>
<ul><li>Appropriate certification as required by regulations.</li></ul>
<ul><li>Extensive experience in subordinate positions and on board passengers ships in a similar role.</li></ul>
<ul><li>Physically and medically fit.</li></ul>
<ul><li>Moral integrity is required.</li></ul>
<ul><li>Public Health, Sanitation and Environmental training courses are appreciated.</li></ul>
<ul><li>Proficient in reading and understanding technical drawings and manuals.</li></ul>
<ul><li>Alaska experience is a plus.</li></ul>
<ul><li>It is recommended to have Public Health, Coast Guard and Port State Control experience.</li></ul>
</div><div><b>Language requirements:</b><br>
Excellent fluent English (verbal, written and technical). English is the working and safety language on board. This also includes the ability to give and receive instructions in verbal and written forms and to effectively and efficiently engage with guests and crew members. Additional languages are considered beneficial.<br>
</div><div><b>Computer knowledge:</b><br>
Good working knowledge of AMOS and Microsoft applications.<br>
</div><div><b>Physical Demands and Working Conditions:</b><br>
Required to stand, walk long distances, reaching and sitting. Repetitive motion of bending, going up and down stairs, climbing ladders. Lifting or pushing of up to 50lbs. The position requires overtime work and irregular schedules. Works in all areas of the vessel with noise, light traffic and distracting environments.<br>
<br>
<b>Profile:</b>
</div><div><ul><li>Vast knowledge of a multi outlet operation.</li></ul>
<ul><li>Strong interpersonal skills and ability to lead, motivate and develop a culturally diverse work force.</li></ul>
<ul><li>Punctual.</li></ul>
<ul><li>Proactive approach to problem solving.</li></ul>
<ul><li>Ability to be flexible, well organized, self managed and motivated.</li></ul>
<ul><li>Ability to handle multiple demands, remain calm and effective under pressure and resolve issues quickly.</li></ul>
<ul><li>Safe, professional and personal practices. Fully conversant with VMS and MLC requirements.</li></ul>
<ul><li>Well groomed and neat appearance.</li></ul>
<ul><li>Ability to deliver a high standard of technical performance.</li></ul>
</div><div>Status - Officer.<br>
Salary - Refer to contract.<br>
Rotation - Refer to contract.</div><h3 class="jobSectionHeader"><b><br>
Key Responsibilities</b></h3><div><br>
<ul><li>
Responsible to oversee the technical performance of the ship.</li></ul>
<ul><li>Safe maintenance, operation, repair, supervision and ownership of electrical systems according to Company policies and other prescribed regulations (to include but not limited to the following):<div>
<ul><li>High voltage systems.</li></ul>
<ul><li>Main and auxiliary engines.</li></ul>
<ul><li>Communications.</li></ul>
<ul><li>Light systems including emergency lighting.</li></ul>
<ul><li>Control systems.</li></ul>
<ul><li>Power and engine systems.</li></ul>
<ul><li>Generators.</li></ul>
<ul><li>Thrusters.</li></ul>
<ul><li>Steering gear.</li></ul>
<ul><li>Hi fog.</li></ul>
<ul><li>Watertight doors.</li></ul>
<ul><li>Electrical installation in the engine room.</li></ul>
<ul><li>Navigation systems.</li></ul>
<ul><li>Emergency systems.</li></ul>
<ul><li>Elevators.</li></ul>
<ul><li>Fire alarm systems.</li></ul>
<ul><li>Automation.</li></ul>
<ul><li>Diesel electric propulsion.</li></ul>
<ul><li>Shell doors and platform equipment.</li></ul>
<ul><li>Galley and pantry equipment.</li></ul>
<ul><li>Provision equipment and HVAC equipment.</li></ul>
<ul><li>Laundry machinery and equipment (main laundry as well as Guest and Crew Laundries).</li></ul>
<ul><li>Dining, Bar, Housekeeping pantry equipment.</li></ul>
<ul><li>Rooms Division equipment.</li></ul>
<ul><li>Incinerator, garbage and food waste equipment.</li></ul>
</div></li></ul><ul><li>Ensures efficient energy management to control fuel consumption to best practice level.</li></ul>
<ul><li>Ensures sufficient stock of spare parts and consumables is on order and in the onboard system to cover planned and unplanned maintenance.</li></ul>
<ul><li>Participates in the development of on board operational plans in accordance with all technical, legislative, safety and procedural specifications, to support the successful completion of maintenance periods and works closely with the Hotel Department on all maintenance issues, ensuring a minimal impact on the shipboard operation.</li></ul>
<ul><li>Updates completed maintenance into the planned maintenance system.</li></ul>
<ul><li>Keeps Chief Engineer and Staff Engineer promptly and fully informed of all problems and matters of significance. Conducting daily communication to review progress and agree on work prioritisation.</li></ul>
<ul><li>Attends arrival and departure manoeuvring.</li></ul>
<ul><li>Accurate completion of log books and other assigned documentation.</li></ul>
<ul><li>Assigns and delegates work to electrical team, actively supervising their work, following up with inspection on completion.</li></ul>
<ul><li>Accountable for ensuring that Company, Public Health, National and International standards are maintained and meeting requirements. Reporting to the Chief Electrician any instances where the ship is unable or fails to comply.</li></ul>
<ul><li>Executes strict practices to ensure that the vessel is operated in accordance with the following regulations and Company policies, during all prevailing circumstances and conditions:<div>
<ul><li>International Safety Management Code.</li></ul>
<ul><li>ISPS Code.</li></ul>
<ul><li>SOLAS.</li></ul>
<ul><li>Code of Safe Working Practices.</li></ul>
<ul><li>MARPOL.</li></ul>
<ul><li>Pollution prevention.</li></ul>
<ul><li>STCW.</li></ul>
<ul><li>Oil Record Book.</li></ul>
<ul><li>ILO/IMO/ITF/MLC 2006.</li></ul>
<ul><li>Ballast Water Management.</li></ul>
<ul><li>US CDC Vessel Sanitation Program.</li></ul>
<ul><li>Merchant Shipping Legislation of the Bahamas.</li></ul>
</div></li></ul><ul><li>Leads, trains and develops subordinates ensuring effective reviews, feedback, coaching and performance management.</li></ul>
<ul><li>Responsible for electrical department working/rest hours and overtime. Maintaining 100% compliance with Company requirements as well as ILO/MLC.</li></ul>
<ul><li>Observes and enforces uniform and grooming standards according to Company policies.</li></ul>
<ul><li>Practices good people management, maintaining proper conduct within the Engine department and other departments around the ship.</li></ul>
<ul><li>All other duties as assigned.</li></ul></div><br>
<h3 class="jobSectionHeader"><b>
About Mystic Cruises</b></h3><div>
Mystic Cruises offers you an exciting journey in the cruise industry. Get on board for an exciting career. Every voyage with Mystic Cruises is filled with opportunities for personal and professional growth. All it takes is passion and commitment to deliver exceptional service to 200 passengers. At Mystic Cruises you can sail on the job opportunity of your lifetime aboard our extraordinary growing fleet.<br>
</div><div>V.Ships Leisure is an exclusive recruitment partner of Mystic Cruises.</div><div><br>
Data Protection Overview<br>
<br>
Note: V.Ships does not charge seafarers a Recruitment / Sign-on Fee for employment.</div></div>

Chief Electrician for cruise vessel

Precision Drilling

<div></div><div><div><div><div><div><div><div>32342
</div></div></div></div><div><div><div><div><h1 class="jobSectionHeader"><b>Senior Rig Electrician
</b></h1></div></div></div></div><div><div><div><div><p>Grey Wolf Drilling International Ltd., a wholly owned subsidiary of Precision Drilling, is recruiting for high caliber and experienced <b>Senior Rig Electricians </b>to assist our Middle East Operations. Senior Rig Electricians are responsible for maintaining all company-owned and operated electrical equipment.</p><p><br>
</p><p><b>The successful applicant will possess the following qualifications:</b></p><br>
<p></p>
<ul>
<li>Must have an accredited Engineering degree/diploma OR Electrician trade certificate or trade equivalent qualification as an<b> </b>Electrician;</li>
<li>Must have a minimum of seven (7) Years of Electrical Maintenance experience in the Drilling Industry;</li>
<li>Must have experience in AC driven systems and automated electrical control systems;</li>
<li>Must be proficient with computer hardware, and the software Microsoft Suite;</li>
<li>Must be fluent written and spoken English;</li>
<li>Able to demonstrate excellent safety leadership;</li>
<li>Able to communicate effectively at all levels;</li>
<li>Has experience assisting in effective management of personnel and operations;</li>
<li>Able to impact and influence people; and,</li>
<li>Able to build customer relationships.</li></ul><br>
<p></p>
<p>
As an employee of Grey Wolf International you can expect a competitive salary, industry leading training, immediate eligibility for you and your dependents to enroll in our medical, health and dental plans and a 28/28 work rotation with paid time off. Flights and immigration support are provided.</p><br>
<p></p>
<p><b>
Process for Applying:</b></p><br>
<p></p>
<p><i>
Please submit your resume including your employment history, education, industry specific training as well as any skills and attributes that you think are applicable to this position. Please note, you will be requested to register in order to apply for this position. This registration process is free and takes approximately 5 minutes.</i></p></div></div></div></div></div></div></div><p></p>

Senior Rig Electrician

Ades Holding

<div><p><b>Job Summary:
</b><br>
<br>
Responsible for performing planned preventive maintenance activities, repairing, and servicing all electrical equipment and systems essential to drilling operations. Conducts effective supervision of electrical crew and tools utilization while considering the safety of personnel, the environment, and equipment to maximize drilling operation efficiency.
</p><p><b>Roles &amp; Responsibilities:
</b></p><p><b>Troubleshooting and Repairs:
</b></p><ul><li>Diagnosing failures and malfunctions in electrical equipment and systems, utilizing diagnostic tools, equipment manuals, and technical documentation to troubleshoot complex issues and implementing effective solutions to restore functionality and minimize downtime.
</li><li>Study and understand different electrical schematics, logic diagrams to gather data from instruments, interpret past and present performance to understand trends and ensure problems are solved.
</li><li>Communicate equipment problems or breakdown information via direct supervisor to technical maintenance support team.
</li></ul><p><b>Equipment Maintenance &amp; Operations:
</b></p><ul><li>Maintaining the reliability and integrity of rig power generation and distribution equipment such as generators, engine controls units, SCR&rsquo;s, VFD&rsquo;s, UPS&rsquo;s, transformers, etc.
</li><li>Overseeing the maintenance, repair, and servicing of different electrical components &amp; systems on the rig, including but not limited to HVAC systems, communication systems, consoles &amp; control panels, DC and AC drilling motors &amp; auxiliaries, pump motors etc.
</li><li>Verification and inspection of third-party equipment and installations.
</li><li>Ensure new equipment installations on the drilling unit are managed by an MOC Synergi case where appropriate by highlighting the potential need to Direct Supervisor and OIM.
</li><li>Conducting and interpreting power calculations, power factor, insulation tests and positive relay tests as required to verify the proper equipment operation as per regulatory and company standards before it is put into service.
</li><li>Communicates with and consult the technical maintenance support team to their work areas where repairs are necessary.
</li><li>Understands and utilizes the Maintenance System for tracking, monitoring, and managing the maintenance and performance of equipment within the rig.
</li><li>Communicates to RMS and OIM when time to access equipment is not adequate to perform the tasks fully.
</li></ul><p><b>Materials &amp; Equipment:
</b></p><ul><li>Plan and coordinate with the OIM/RMS and other departments to secure equipment&rsquo;s and perform safety inspections prior to any operations or major activity such as rig moves, running &amp; retrieving BOP.
</li><li>Ensuring that the appropriate electrical requirements of the statutory and regulatory bodies including the classification society are adhered to and records maintained.
</li><li>Maintain inventory of spare parts, consumables, and supplies for electrical equipment, ensuring adequate stock levels are maintained to support ongoing operations and maintenance activities.
</li><li>Coordinating with procurement and logistics teams to procure spare parts and replacement components as needed, ensuring timely delivery, availability &amp; compliance with the class &amp; certification requirements.
</li><li>Ensure Switch rooms, VFD or SCR rooms have no flammable materials contained within them and that these areas are not used as storage areas. Insulating mats will be maintained and kept free of grease and dirt. Wherever possible these areas should be restricted to technical personnel only. Electric shock recovery kits will be maintained and accessible.
</li></ul><p><b>Rig Move:
</b></p><ul><li>Carries out related duties to prepare the rig for towing, ensure all electrical equipment for rig move is prepared and maintaining the integrity and reliability of the electrical systems and equipment throughout prior, during &amp; after the rig move.
</li></ul><p><b>Client Management:
</b></p><ul><li>Promote and maintain an effective working relationship with other departments, third party personnel and Client Representatives.
</li><li>Responds to client requests and needs concerning materials, equipment, and personnel after getting adequate management approval.
</li></ul><p><b>Reporting and Documentation:
</b></p><ul><li>Maintains proper logs and records of all electrical maintenance activities, equipment inspections and repairs in accordance with company procedures and regulatory requirements.
</li><li>Prepare accurate and timely reports, including daily equipment status reports, incident reports, job safety analysis for hazardous activities.
</li><li>Ensure the permit to work and isolation systems are followed and applied.
</li><li>Supply information to assist in the development of maintenance and repair budgets.
 </li></ul><p><b>People Management &amp; Development:
</b></p><ul><li>Provide clear instructions to their team regarding their duties, responsibilities, and any necessary safety precautions prior to commencing work.
</li><li>Mentor, develop and train their team to ensure safe and effective operations.
</li><li>Identifies opportunities for skill and career advancement, works to support the professional growth of their team.
</li><li>Ensure their team receives the necessary required training to perform their duties safely and effectively through on-the-job training, and participation in safety drills and exercises.
</li><li>Support, promote and actively participate in ADES&rsquo;s Competency Assurance Program for their team.
</li><li>Evaluates the performance of their team on constant and fair feedback basis, identify areas for improvement, drive ADVANCE process to formalize a performance management culture.
</li></ul><p><b>Job Requirements:
</b></p><p><b>Education &amp; Experience:
</b></p><ul><li>Formal training as an electrician in the form of a multi-year apprenticeship / training program is required.
</li><li>Minimum five (5) years of working experience in the electrical field in drilling and workover operations and have demonstrable supervisory skills.
</li><li>Preferred to have working experience on Offshore rigs.
</li></ul><p><b>Skills/Competencies Required:
</b></p><ul><li>Fluent in the English language (Spoken &amp; Written)
</li><li>PC literate in Microsoft Office
</li><li>Situation Awareness, Communication, Teamwork, detail oriented, Problem Solving.
</li></ul><p><b>Physical Requirements:
</b></p><ul><li>Regularly climbing (stairs, ladders).
</li><li>Regularly bending, twisting, and standing.
</li><li>Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat).
</li><li>Ability to work at heights and in confined spaces.
</li><li>Ability to work day or night shift as required with 12 hours minimum shift.
</li></ul><p><b>Certifications:
</b></p><ul><li>As per ADES Training Matrix.</li></ul></div>

Senior Electrician

Stellantis

The Electric Drive Module (EDM) Chief Engineer has the responsibilities to ensure the eDrive propulsion system components, motors, inverters, EDM, drive line, and controllers are designed and validated to meet program requirements and timing. Provides leadership to product engineering team for given propulsion system components. Delivers balanced, integrated, and validated system to the vehicle team which meets requirements. Coordinates with sub-system teams (motors, inverters, reducer, controls, software, and calibration). Lead all aspects of EDS projects to achieve customer requirements and functional targets, including adaptation, NVH, efficiency, performance, durability, and cost. Provide direction in the architecture and integration of the eDrive systems to meet functional, performance and durability requirements. Manages team of Assistant Chief Engineers, Design System Engineers, and Program Managers.
<br><br>
<b>Responsibilities:</b><br>
Single point technical contact for EDM
<br><br>
Coordinate and approve supplier selection.
<br><br>
Standardization and planning technical leadership to achieve complexity reduction.
<br><br>
Ensure industry competitiveness for mass, efficiency, torque, power, NVH, and cost.
<br><br>
Resolution of technical and commercial issues to meet on time PPAP.
<br><br>
Establish and lead weekly EDM technical table to drive collaboration and balancing of system and subsystems.
<br><br>
Ownership and improvement of 3 MIS, 12 MIS, and 36 MIS quality.
<br><br>
Identify requirements and collect cross-functional department information/data to take technical decisions in the appropriate forum to meet functional objectives within program scope.
<br><br>
Ensure coherence between the Product technical features and the Sub System Technical Specification and make all final technical decisions for the engine (owner’s and service manual approvals, root cause analysis closure, SSTS approval,…)
<br><br>
Ensure maximum achievable commonality across all applications within the engine family
<br><br>
Ensure best practices and lessons learned are used and properly shared across the engine family
<br><br>
Ensure product readiness to support approved launches defining appropriate timing milestones for the given project and leading the technical change review meetings
<br><br>
Promote Intellectual property development (patents, NDAs, EBPs, etc. ) as a result of product innovation
<br><br>
Manage R&D expenses identifying all possible efficiencies vs. approved business case
<br><br>
Manage Product lifecycle, including Quality Improvement activities
<br><br>
<b>Basic Qualifications:</b><br>
A minimum of a Bachelor of Science degree in Applied Physics, Mechanical, Electrical, Aerospace, Computer Engineering, Computer Science from an ABET accredited school or equivalent
<br><br>
A minimum of 10 years of experience in a related field
<br><br>
Understanding of System Requirements Engineering required for customer functions within the Electric Drive and Charging Systems fields
<br><br>
Ability to author system/component level requirements
<br><br>
Strong interpersonal communication, team/leadership skills/experience
<br><br>
<b>Preferred Qualifications:</b><br>
Advanced degree in with emphasis in electrical power conversion, electromechanical energy conversion, power electronics, and electrical machines from an ABET accredited school or equivalent.
<br><br>
Demonstrated working level experience in decomposing intended function into requirements inclusive of many of the following: Electric drive systems, gear train systems, powertrain integration, high voltage electronics, low voltage electronics, motor controls, communication protocols, sensors, and software.
<br><br>
Working experience in creation and execution of validation plans inclusive of the following: Electric Drive Units, Electric Machines, Inverters, Gears, Auxiliary Power Modules, and On Board Chargers.
<br><br>
<b>Critical character traits to ensure success:</b> Action Oriented, Dealing with Ambiguity, Customer Focus, Problem Solving.
<br><br>
Our Benefits — Designed with You in Mind
<br>Comprehensive Health & Well-being Coverage
<br>From your very first day, you’ll have access to medical, dental, vision, and prescription drug coverage — ensuring you and your family stay healthy and protected.
<br>Generous Paid Time Off
<br><b>We believe in work-life balance. That’s why we offer:</b> 17+ paid holidays, including shut-down from December 24th through New Years Day every year. Vacation, float & wellbeing days, sick time and fully paid parental leave when your family needs you most.
<br>Competitive Retirement Savings Plans
<br><br>
<b>We help you plan for the future with:</b><br>
An employer match on contributions to your 401k, Roth, and Catch-Up plans
<br>An employer contribution, even if you don’t contribute
<br>Income Protection & Insurance Options
<br>Benefit from included and optional disability, life, and other insurance programs — because your peace of mind matters.
<br>Company Vehicle Lease Program
<br>Eligible employees and their immediate families can enjoy company vehicle lease options with included insurance, maintenance, and unlimited mileage. Plus, take advantage of exclusive discounts on Stellantis products.
<br>Family Building Benefit
<br>We proudly support all paths to parenthood- including fertility and infertility treatments, adoption services, and gestational surrogacy.
<br>Support for Your Growth and Giving Back
<br><br>
<b>We believe in investing in your future and your passions:</b><br>
Tuition reimbursement
<br>Student loan refinancing programs
<br>18 paid volunteer hours each year to make a difference in your community
<br>And so much more!
<br>When you join us, you’re not just building a career — you’re joining a company that supports you, inside and outside of work.

Chief Engineer - Electric Drive Module

Hilton

<div><p>Maintenance Engineer</p><p>
A Maintenance Operative will support the Chief Electrician with general maintenance work, to maintain proper conditions of tools, equipment, and working areas throughout the hotel.</p><b><br>
What will I be doing?</b><p><br>
As Maintenance Operative, you will support the Engineering Department to ensure an exceptional operational experience throughout the hotel. Specifically, a Maintenance Operative will perform the following tasks to the highest standards:</p><ul>
<li>Perform day-to-day general maintenance duties within the hotel rooms and public areas</li>
<li>Respond promptly to maintenance issues and emergency calls</li>
<li>Conduct regular inspection tours of the hotel to ensure all operating equipment is working correctly</li>
<li>Work closely with the Engineering Team on any projects or schedules</li>
<li>Maintain all tools, equipment, and working areas in proper condition</li>
<li>Follow all Health and Safety rules within the Department and the hotel</li>
<li>Demonstrate exceptional customer service when engaging with Guests</li>
<li>Perform any other tasks as requested by the Chief Engineer to ensure the smooth operation of the hotel</li></ul><b>
What are we looking for?</b><p><br>
Maintenance Operatives serving Hilton brands are always working on behalf of our Guests and working with other Team Members. To successfully fill this role, you should maintain the attitude, behaviours, skills, and values that follow:</p><ul>
<li>Previous maintenance experience, preferably in a hotel or a similar varied work environment such as ships, hospitals or retail businesses</li>
<li>A certificate in Engineering, preferred</li>
<li>Strong interpersonal and communication skills</li>
<li>Ability to work without close supervision and within established timeframes</li>
<li>Strong work ethic</li>
<li>A passion for managing a variety of projects and tasks throughout the day</li></ul><br>
<b>
What will it be like to work for Hilton?</b><br>
<p>Hilton is the leading global hospitality company, spanning the lodging sector from luxurious full-service hotels and resorts to extended-stay suites and mid-priced hotels. For nearly a century, Hilton has offered business and leisure travelers the finest in accommodations, service, amenities and value. Hilton is dedicated to continuing its tradition of providing exceptional guest experiences across its global brands. Our vision &ldquo;to fill the earth with the light and warmth of hospitality&rdquo; unites us as a team to create remarkable hospitality experiences around the world every day. And, our amazing Team Members are at the heart of it all!</p></div>

Maintenance Engineer

Orion Building Engineering Services Ltd

<div>
 We are looking to recruit an
 <strong>
  Multi Skilled Electrician
 </strong>
 to work within our maintenance department.
 <br/>
 <br/>
 <strong>
  As An Multi Skill Electrician Your Duties Will Include
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Electrical maintenance
  </li>
  <li>
   Building services maintenance
  </li>
  <li>
   Lighting Alarm systems
  </li>
  <li>
   High and low voltage
  </li>
  <li>
   Re wiring
  </li>
  <li>
   AHU
  </li>
  <li>
   FCU
  </li>
  <li>
   PPMs
  </li>
  <li>
   Multi skilled maintenance
  </li>
  <li>
   Installation Power
  </li>
  <li>
   Reactive maintenance
   <br/>
   <br/>
  </li>
 </ul>
 Multi Skilled Electrician &ndash; The Successful Application we are looking for:
 <br/>
 <br/>
 <ul>
  <li>
   Fully qualified maintenance electrician City and Guilds or NVQ level 3
  </li>
  <li>
   Driving licence
  </li>
  <li>
   17th/18th edition Maintenance experience ideally from a commercial organisation &ndash; a service provider ideally Multi skilled maintenance experience
  </li>
  <li>
   Good communication skills
   <br/>
   <br/>
  </li>
 </ul>
 Multiskilled Electrician Benefits Offered
 <br/>
 <br/>
 <ul>
  <li>
   Monday &ndash; Friday 8:00-17:00
  </li>
  <li>
   Competitive salary
  </li>
  <li>
   Company Phone, Van, Petrol Card
  </li>
  <li>
   22 days annual leave (exclusive of bank holidays) increasing by 1 extra day for each year of service up to a maximum of 25 days
  </li>
  <li>
   Overtime rates where required
  </li>
  <li>
   Career development and training provided
  </li>
 </ul>
</div>


Multi Skilled Electrician

Search 1280+ Chief electrician jobs near you this May. New roles added regularly across leading industries. Apply today.