chief mechanical engineer

Talovia Construction

Talovia Construction is seeking a highly experienced and strategic professional to serve as Chief Executive Officer and Chief Civil Engineer. The successful candidate will lead organizational operations while overseeing complex civil engineering projects to ensure quality, efficiency, and compliance with industry standards.Key Responsibilities:<ul><li>Provide executive leadership and strategic direction for the company</li><li>Oversee planning, design, and execution of civil engineering projects</li><li>Ensure compliance with local regulations and engineering standards</li><li>Manage budgets, resources, and project timelines</li><li>Lead and mentor engineering and administrative teams</li><li>Build and maintain relationships with clients, stakeholders, and regulatory authorities</li></ul>Qualifications:<ul><li>Bachelor&rsquo;s or Master&rsquo;s degree in Civil Engineering or related field</li><li>Extensive experience in civil engineering and executive leadership roles</li><li>Strong knowledge of construction practices, project management, and regulatory frameworks in Oman</li><li>Excellent leadership, communication, and decision-making skills</li></ul>Location: Muscat, Oman Compensation: OMR 5,200 per monthQualified candidates are encouraged to apply with an updated CV and relevant credentials.نوع الوظيفة: دوام كاملموقع العمل: بشكل شخصي

Chief Civil Engineer

Meranti Green Steel

<div>
 
 Purpose / Mission:
 
 
 
 Serve as the owner's mechanical discipline authority for the 2.5 Mtpa green Direct Reduced Iron (DRI) / Hot Briquetted Iron (HBI) plant in Duqm, Oman. Lead all mechanical engineering aspects of the project from pre-FID through FEED, EPC tender, construction and commissioning. Provide technical direction, assurance and review across rotating equipment, static equipment, piping, pressure systems, and mechanical structures.
 
 
 
 Key Responsibilities:
 
 
 
 <ul>
 <li>
 Lead the owner's mechanical engineering review, approval and assurance process across all plant areas including the DRI/HBI plant, Balance of Plant, utilities, and supporting infrastructure.
 </li>
 <li>
 Provide mechanical discipline input to specifications, tender documentation, technical evaluations and award recommendations for EPC and equipment packages.
 </li>
 <li>
 Review and approve mechanical deliverables from the Owner's Engineer and EPC contractors, including P&amp;IDs, equipment datasheets, piping specifications, material selection, and mechanical drawings.
 </li>
 <li>
 Interface with process, electrical, instrumentation, civil and structural disciplines to ensure integrated plant design and construction.
 </li>
 <li>
 Lead mechanical input to HAZID, HAZOP and other process safety reviews.
 </li>
 <li>
 Support cost estimate development for mechanical scope to the level of accuracy required for FID.
 </li>
 <li>
 Interface with the process technology licensor on mechanical battery limits, equipment interfaces and package integration.
 </li>
 <li>
 Review and ensure compliance with international mechanical design codes (ASME, EN, API) and applicable Omani regulatory requirements.
 </li>
 <li>
 Provide mechanical technical leadership during factory acceptance testing, construction supervision, mechanical completion, and commissioning activities.
 </li>
 <li>
 Contribute to the development and mentoring of mechanical engineering resources as the in-country team grows from pre-FID into execution.
 
 
 </li>
 </ul>
 
 Requirements / Skills / Experience:
 
 
 
 <ul>
 <li>
 Minimum 15 years' experience in mechanical engineering on large heavy industrial process plants.
 </li>
 <li>
 Strong preference for direct experience on DRI, ironmaking, steelmaking, petrochemical, fertilizer, refinery or analogous gas-based heavy process plant projects.
 </li>
 <li>
 Experience across the full project lifecycle: FEED, detailed design, procurement, construction supervision and commissioning.
 </li>
 <li>
 Strong command of rotating equipment (compressors, pumps, blowers, fans), static equipment (vessels, heat exchangers, reactors), piping design, and pressure systems.
 </li>
 <li>
 Demonstrated familiarity with ASME, EN and API mechanical design codes.
 </li>
 <li>
 Experience specifying equipment, evaluating bids, and managing vendor and contractor mechanical engineering deliverables.
 </li>
 <li>
 Prior GCC or extreme-environment project experience is a strong plus.
 </li>
 <li>
 Demonstrated ability to work as a senior technical authority in a lean owner's team environment.
 </li>
 <li>
 Strong communication, technical writing, and review skills.
 </li>
 <li>
 Comfortable operating within a multi-package contracting environment and managing interfaces across contractors.
 
 
 </li>
 </ul>
 
 Required Education / Qualification / Training:
 
 
 
 <ul>
 <li>
 Bachelor's degree in Mechanical Engineering (required).
 </li>
 <li>
 Master's degree in Mechanical Engineering or related field (preferred).
 </li>
 <li>
 Chartered Engineer, Professional Engineer or equivalent internationally recognized professional status (preferred).
 </li>
 <li>
 Member of a recognized professional engineering institution (e.g. IMechE, ASME) (preferred).
 
 
 </li>
 </ul>
 
 Required Language Proficiency:
 
 
 
 English - Fluent
 
 
 Arabic - Nice to have
</div>

Senior Mechanical Engineer

Dallas POS Systems

Job OverviewDallas POS Systems is seeking an experienced Senior Mechanical Engineer to join our dynamic team. The ideal candidate will have a strong background in mechanical engineering, contributing to innovative solutions in point-of-sale technology.Key Responsibilities<ul><li>Design and develop mechanical systems and components for new products.</li><li>Collaborate with cross-functional teams to ensure successful product development.</li><li>Conduct feasibility studies and cost analysis.</li><li>Oversee manufacturing processes and quality control measures.</li><li>Mentor junior engineers and provide technical guidance.</li></ul>Qualifications<ul><li>Bachelor's degree in Mechanical Engineering or related field.</li><li>Minimum of 5* years* experience in mechanical engineering.</li><li>Proficient in CAD software and engineering tools.</li><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and teamwork abilities.</li></ul>Salary<ul><li>Hourly Rate: QAR 60 - QAR 120, commensurate with experience and qualifications.</li></ul>If you are passionate about engineering and technology and are ready to take your career to the next level, we encourage you to apply!الراتب المدفوع: QAR٦٠٫٣٢&nbsp;لكل ساعةموقع العمل: على الطريق

ADASI

<div>
 
 External Job Description
 
 
 
 
 Position -
 
 Principal Mechanical Engineer - Loads / Stress
 
 
 
 Entity :
 
 ADASI
 
 
 
 Department
 
 -Engineering Services
 
 
 
 Location-
 
 Abu Dhabi
 
 
 
 Key Responsibiities-
 
 
 
 <ul>
 <li>
 Develop aircraft-level loads for UAV systems, including: Maneuver loads (limit and ultimate cases) ,Gust and turbulence loads (where applicable) ,Ground loads (landing, taxi, handling, transportation) ,Propulsion and system-induced loads (thrust, inertia, vibration drivers) Payload and mission-dependent loads
 </li>
 <li>
 Translate mission profiles and operational scenarios into design loads, working closely with Flight Mechanics, Aerodynamics, Systems, and Test teams.
 </li>
 <li>
 Define load cases, combinations, and envelopes, ensuring: Internal consistency across disciplines, Traceability to assumptions and mission definitions ,Practical usability by stress and design teams
 </li>
 <li>
 Establish and document loads methodologies, including: Assumptions and simplifications appropriate for UAV development ,Use of empirical data, hand methods, and analytical models , Clear definition of validity ranges and limitations
 </li>
 <li>
 Perform analytical and numerical loads analysis, using- First-principles calculations (free-body diagrams, inertia relief, load paths) Simplified models (beam models, lumped masses)FEM (primarily for load extraction and distribution, not detailed stress sizing)
 </li>
 <li>
 Provide load inputs to stress, design, and systems teams, including-Section loads, interface loads, and component-level loads ,Time histories or envelopes when required ,Clear definition of coordinate systems and reference conditions
 </li>
 <li>
 Support multidisciplinary integration, ensuring loads are aligned with: Mass properties and CG evolution, Control laws and flight envelope assumptions ,Structural layouts and load paths
 </li>
 <li>
 Contribute to test definition and correlation, including: Ground and flight test instrumentation strategies (strain gauges, accelerometers) Back-calculation of loads from test data ,Updating models and assumptions based on test evidence
 </li>
 <li>
 Act as a situational technical leader by driving resolution of ambiguous or conflicting inputs ,Challenging unrealistic assumptions ,Providing technically sound direction during design reviews and critical decisions
 </li>
 <li>
 Continuously improve engineering practices, contributing to: Loads process definition and refinement templates, calculation methods, and internal guidelines , Knowledge sharing across programs
 
 
 </li>
 </ul>
 
 Educational Background
 
 :
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Mechanical or Aerospace Engineering (Master&rsquo;s or PhD preferred)
 
 
 </li>
 </ul>
 
 Professional Experience:
 
 
 
 <ul>
 <li>
 Strong understanding of aircraft loads development, including maneuver, gust, and ground loads
 </li>
 <li>
 Ability to translate real-world missions into engineering load cases, avoiding over-idealization
 </li>
 <li>
 Solid grasp of:
 
 
 </li>
 </ul>
 Rigid-body dynamics and inertia effects
 
 
 Load paths and structural interaction
 
 
 <ul>
 <li>
 Basic aeroelastic considerations (at least at conceptual level)
 </li>
 <li>
 Experience with: Analytical tools (Excel, Python, MATLAB or similar) FEM tools (ANSYS, NASTRAN, Abaqus) for load extraction and distribution
 </li>
 <li>
 Comfortable working with incomplete data, making justified engineering assumptions
 
 
 </li>
 </ul>
 Standards &amp; Compliance
 
 
 <ul>
 <li>
 Familiarity with aerospace standards (EASA, FAA, MIL-STD) as guidance frameworks, with the ability to scale and adapt them to UAV and non-certified platforms
 
 
 </li>
 </ul>
 
 Preferred Certifications
 
 
 
 <ul>
 <li>
 Chartered Engineer (CEng) or Professional Engineer (PE) (nice to have)
 </li>
 <li>
 Experience contributing to internal methods, tools, or engineering processes
 
 
 </li>
 </ul>
 
 #ADASI
 
</div>

Principal Mechanical Engineer - Loads / Stress

Dar Al Riyadh

<div>Senior Mechanical Engineer will be responsible for reviewing, managing, and supervising all mechanical engineering works for a PMC infrastructure project involving roads, bridges, and tunnels. The role ensures that all mechanical systems are designed, installed, tested, commissioned, and handed over in accordance with project specifications, international standards, and client and authority requirements. 
 
Responsibilities
<ul><li>Review and approve mechanical designs, drawings, calculations, specifications, and method statements submitted by contractors.
</li><li>Ensure mechanical systems are fully coordinated with civil, structural, electrical, ITS, and tunnel safety systems.
</li><li>Verify compliance with project specifications, international standards (ASHRAE, NFPA, IEC, EN), and local authority regulations.
</li></ul><ul><li>Oversee mechanical systems associated with road infrastructure including pump stations, drainage pumping systems, utility chambers, and maintenance facilities.
</li><li>Review mechanical installations for road-side buildings and ancillary structures.
</li></ul><ul><li>Review mechanical components for bridges including movable bridge systems (if applicable), drainage systems, expansion joint interfaces, and inspection/maintenance equipment.
</li><li>Ensure mechanical installations are durable and protected against environmental exposure.
</li></ul><ul><li>Review and approve tunnel mechanical systems including ventilation systems (longitudinal, transverse), jet fans, dampers, fire &amp; life safety systems, smoke control systems, and emergency response equipment.
</li><li>Coordinate mechanical systems with electrical power, SCADA, fire detection, and ITS systems.
</li><li>Ensure compliance with international tunnel safety and life-safety standards.
</li></ul><ul><li>Supervise factory acceptance tests (FAT), site acceptance tests (SAT), commissioning, and system integration testing.
</li><li>Review test results and ensure rectification of mechanical defects or non-conformities.
</li><li>Support smooth handover to operations and maintenance teams.
</li></ul><ul><li>Liaise with contractors, suppliers, authorities, and the client.
</li><li>Resolve mechanical engineering issues and interface challenges.
</li><li>Attend technical meetings, inspections, and progress reviews.
</li></ul><ul><li>Monitor construction quality and ensure compliance with approved drawings and specifications.
</li><li>Review non-conformance reports (NCRs) and verify implementation of corrective actions.
</li><li>Ensure compliance with health, safety, and environmental requirements.
</li></ul><ul><li>Maintain records of mechanical approvals, inspections, testing, and commissioning activities.
</li><li>Prepare periodic reports on mechanical progress, risks, and performance.
</li><li>Support audits, authority approvals, and client reviews.
</li></ul>Required
<ul><li>Bachelor&rsquo;s degree in mechanical engineering or related discipline.
</li><li>Master&rsquo;s Degree is preferred.
</li><li>Minimum 15 years of experience in mechanical engineering for major infrastructure projects.
</li><li>Proven PMC or consultancy experience on roads, bridges, and tunnel projects.
</li><li>Strong knowledge of tunnel ventilation, fire &amp; life safety systems, and mechanical interfaces.
</li><li>Familiarity with international standards and local authority requirements.
</li><li>Excellent coordination, communication, and technical reporting skills.</li></ul></div>

Transpo Group Middle East

Our client is a leading architectural and engineering consultancy in the Middle East, this firm specializes in providing a wide range of services to the construction industry. With a focus on innovative modern design, the firm caters to a diverse client base by offering bespoke solutions tailored to individual needs. Services include architectural design, structural, electrical, and mechanical design, quantity surveying, construction management, tendering &amp; contracts, and site supervision. Supported by a skilled team of senior architects, engineers, designers, and project managers, the firm is led by a management team focused on delivering exceptional service. With a proven record in residential, commercial, hospitality, educational, and sports facility designs, the firm is known for offering value engineering and technical support to developers and the construction industry.​​​​​Role Overview:We are seeking a highly experienced and detail-oriented Senior Mechanical Engineer to join their Abu Dhabi team. The ideal candidate will lead the design, coordination, and delivery of mechanical systems across a diverse portfolio of projects, ensuring compliance with UAE authority regulations and international standards.Key Responsibilities:<ul><li>Lead the design and development of mechanical systems including HVAC, plumbing, drainage, and firefighting systems</li><li>Prepare and review mechanical design calculations, drawings, specifications, and reports</li><li>Ensure all designs comply with UAE authority regulations (DEWA, ADDC, Civil Defense, etc.) and international standards</li><li>Coordinate closely with architects, structural engineers, and other MEP disciplines to ensure integrated design delivery</li><li>Review and approve shop drawings, material submittals, and technical documentation</li><li>Conduct design reviews, value engineering, and optimization of mechanical systems</li><li>Participate in client meetings, technical presentations, and authority coordination</li><li>Support construction supervision teams by responding to RFIs and resolving on-site technical issues</li><li>Monitor project progress and ensure timely delivery within budget and quality standards</li><li>Mentor and guide junior engineers and design staff</li></ul>Requirements:<ul><li>Bachelor&rsquo;s Degree in Mechanical Engineering (Master&rsquo;s preferred)</li><li>Minimum 12 years of experience in mechanical engineering within consultancy environments</li><li>Proven experience working on high-rise buildings, mixed-use, residential, commercial, or hospitality projects</li><li>Strong knowledge of HVAC design, chilled water systems, ventilation, plumbing, and firefighting systems</li><li>In-depth understanding of UAE codes, authority requirements, and approval processes</li><li>Proficiency in software such as HAP, Elite, AutoCAD, Revit MEP, and other design tools</li><li>Familiarity with international standards such as ASHRAE, NFPA, and local codes</li><li>Strong coordination, communication, and problem-solving skills</li></ul>Preferred Qualifications:<ul><li>Preferred: Abu Dhabi engineering registration / DMT / municipality license</li><li>Experience working on GCC projects (UAE experience highly preferred)</li><li>Knowledge of sustainability standards and energy-efficient design (e.g., Estidama, LEED)</li><li>Experience in BIM coordination and multidisciplinary collaboration</li></ul>Application Question(s):<ul><li>Did you include the projects you worked on in your CV?</li><li>Did you include your latest CV in your application?</li><li>Do you have HVAC design, chilled water systems, ventilation, plumbing, and firefighting systems?</li></ul>Education:<ul><li>Primary (Preferred)</li></ul>Experience:<ul><li>architectural design coordination: 10 years (Required)</li><li>HAP, Elite, AutoCAD, Revit MEP: 5 years (Preferred)</li><li>UAE codes, authority requirements, approval processes: 5 years (Preferred)</li><li>hirise, mixed-use, residential, hospitality projects: 10 years (Required)</li></ul>Work Location: In person

<div>
 
 
 
 Company Overview
 
 :
 
 
 
 
 
 
 Dar, the founding member of the Sidara group, is an international multidisciplinary consulting organization specializing in engineering, architecture, planning, environment, project management, facilities management, and economics. Sidara operates in 60 countries with 20,500 professionals, Dar connects people, places, and communities through innovative solutions to the world's most complex challenges. We deliver projects from inception through completion, embracing challenges to empower communities worldwide. Learn more at www.dar.com.
 
 
 
 
 
 
 
 Our Vision and Values:
 
 
 
 
 
 
 
 
 
 
 We aspire to be the chosen home of those with a gift for crafting solutions that empower people and an unwavering passion for learning and innovation. Our core values shape our culture and guide our decision-making. We are committed to:
 
 
 
 
 <ul>
 <li>
 Excellence
 </li>
 <li>
 Responsibility
 </li>
 <li>
 Empowerment
 </li>
 <li>
 Connectivity
 </li>
 <li>
 Courage
 </li>
 </ul>
 
 
 
 
 Senior Mechanical Engineer will prepare/review engineering documents, specifications &amp; designs, supervising the construction of works at projects, reviewing work of contractors for compliance with plans and specifications and supervising engineering personnel.
 
 
 
 
 
 
 
 Responsibilities
 
 :
 
 
 
 
 
 <ul>
 <li>
 Responsible for leading a team of Mechanical Engineers and ensure the compliance of the submitted documents by the contractors and design office with project&rsquo;s established budget, RFP/Client&rsquo;s requirements, and the scope of work in compliance with contracts/agreement.
 </li>
 <li>
 Carry out technical reviews for all areas of Mechanical Engineering (HVAC, Piping, Plumbing and firefighting systems) from concept design to construction design phases, shop drawings and material submittals in reference to project's requirements, international codes, and related standards in a timely manner.
 </li>
 <li>
 Managing project's required deliverables and monitoring the presentation of design office.
 </li>
 <li>
 Review and develop design schedules in consistent with construction schedules and actual site work progress and reprioritize design submittals accordingly, as and when required.
 </li>
 <li>
 Conducting periodical design meetings and design workshops with design office, sub-consultants, contractors, and clients to solve the pending issues and to mitigate or avoid any potential delays in the actual progress, so as to achieve the planned progress.
 </li>
 <li>
 Overseeing engineers to ensure the consistency of design review comments with the projects&rsquo; objectives, tracking action / or to do list of outstanding design issues to be replied to contractors/design consultants in a timely manner.
 </li>
 <li>
 Review and develop the projects' documents flow and work procedures in regard to the projects' own requirements.
 </li>
 <li>
 Liaising with site supervision team and conducting site visits to understand projects' required details and pending design issues.
 </li>
 <li>
 Coordinate with technical team to initiate the required actions to respond to contractor.
 </li>
 <li>
 Carry out constructability review during design and modification stages.
 </li>
 <li>
 Diligently handle client issues, taking prompt actions to address the same.
 </li>
 </ul>
 
 
 
 
 
 
 
 
 
 Requirements
 
 :
 
 
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Mechanical engineering or equivalent from a recognized university.
 </li>
 <li>
 Extensive experience in mechanical engineering, with a proven track record of leading and managing mechanical design projects.
 </li>
 <li>
 Proficiency in mechanical design software (e.g., AutoCAD, Revit, HVAC design software, etc.).
 </li>
 </ul>
 
 
 
 
 
 * While we carefully review all applications, only candidates meeting the specified requirements will be contacted for further consideration. We appreciate your understanding and thank all applicants for their interest.
 
 
 
 
</div>

Search 5962+ Chief mechanical engineer jobs near you this May. New roles added regularly across leading industries. Apply today.

5962 chief mechanical engineer jobs Near Me

Chief Civil Engineer

Senior Mechanical Engineer

Senior Mechanical Engineer

Principal Mechanical Engineer - Loads / Stress

Senior Mechanical Engineer

Senior Mechanical Engineer

Senior Mechanical Engineer