electrical engineer

qa/qc engineer

civil engineer

planning engineer

project engineer

corrosion engineer

Penspen

<div><div><div><div><div><div><p><b>Responsibilities:</b></p>
<ul>
<li>Executing materials and corrosion analysis/studies under the supervision of the Asset Integrity Manger and governance of the Chief Discipline Engineer (CDE)</li>
<li>Project Management of small projects</li>
<li>Executing plant / pressurised static assets integrity (FFS / RBI) assessments under the supervision of the Project Manager and governance of the Chief Discipline Engineer (CDE)</li>
<li>Providing guidance to a team of young engineers on assets corrosion analysis, FFS and RBI.</li>
<li>Should be able to produce detailed calculations as and when required</li>
<li>Producing high quality deliverables as part of the project</li>
<li>Be competent to check and QAQC calculations and reports produced by other engineers related to corrosion analysis, materials selection and FFS / RBI</li>
<li>Knowledge of CP systems performance analysis and design</li>
<li>Corrosion management performance review and preparation of corrosion management reports</li>
<li>Ensure that corrosion monitoring can fit into the general basis of design and safe operations plans.</li>
<li>Provide and report assurance that assets and processes will be in the best possible position for online and intrusive corrosion monitoring.</li>
<li>New projects corrosion monitoring review and recommendations</li>
<li>Review of existing and future corrosion monitoring facilities</li>
<li>Use of corrosion modelling software Electronic Corrosion Engineer (ECE-5) or equivalent for corrosion rate calculation.</li>
<li>Review Chemical Treatment existing requirements and advise any required changes.</li>
<li>Preservation and Mothballing requirements</li>
<li>Quality, Health &amp; Safety and Environmental Management System must be implemented within the area of operation as per the company approved procedures and ISO Standards</li>
</ul>
<p><b>Knowledge / Experience (Skills):</b></p>
<ul>
<li>Knowledge of materials behaviours and corrosion analysis</li>
<li>Experience in materials selection for Oil and Gas assets</li>
<li>Use of industry recognized software for corrosion rate analysis</li>
<li>High level of experience in pipeline integrity assessments based on industry standards (DNVGL-RP-F101, ASME B31G, ISO 12747)</li>
<li>Familiar with reviewing inspection data (DCVG, CIP&rsquo;s ILI)</li>
<li>Track record of conducting pipeline FFS and life extension studies</li>
<li>Familiar with typical engineering deliverables of materials and corrosion for greenfield development studies (conceptual, FEED, detailed engineering)</li>
<li>Knowledge of CP systems performance analysis and design</li>
<li>Knowledge of FFS relevant codes and standards (API 579, ASME B31G etc.)</li>
<li>High level of computer literacy with MS Office (specifically Word &amp; Excel) and experience of other specific analysis software packages (Corrdata or equivalent, MathCAD, Abaqus, Caesar, Autopipe etc.).</li>
<li>Electronic Corrosion Engineer (ECE-5) or equivalent for corrosion rate calculation.</li>
<li>Good communication skills in English, verbal and written</li>
</ul>
<p><b>Qualifications:</b></p>
<ul>
<li>Minimum 5 years discipline engineering experience in the Oil and Gas</li>
<li>Bachelor&rsquo;s degree qualification in Materials Science or similar. Master&rsquo;s degree is an advantage</li>
<li>NACE accreditation is required</li>
<li>Professional membership with an engineering institute (NACE or MICorr)</li></ul></div></div></div></div></div></div>

Materials and Corrosion Engineer

Wood PLC

<div><div><p><b>Remarkable people, trusted by clients to design and advance the world.
</b></p></div><div><p><b>The Role
</b></p></div><div><p>We are seeking an experienced Lead &ndash; Material &amp; Corrosion Engineer for an exciting opportunity with a high-profile client. This role is ideal for a professional with a strong background in materials engineering and corrosion management, particularly in the design, operation, and maintenance of rotating equipment with offshore experience.
</p></div><div><div><div><p><b>Our Clients and Projects
</b></p><p><b>Designing the future. Transforming the world.
</b></p><p>Across EMEA, our teams are providing solutions and expertise to support our growing client base, focused on combining maintenance and operations with asset management, modifications and engineering services across the energy and materials markets.
</p><p>We are focused on growth and our strategy is centered around building partnerships with our clients across the three regions: UK, Norway and the Middle East and Africa.
</p><p><b>What we can offer
</b></p><ul><li><b>Meaningful and interesting projects: </b>Delivered to high profile clients across the Energy Sector
</li><li><b>Commitment to Diversity and Inclusion: </b>We are an organization actively committed to diversity and inclusion across our business
</li><li><b>Competitive remuneration package: </b>With regular reviews to ensure we are rewarding at the right level in line with the market
</li><li><b>Medical Insurance: </b>Ensures inpatient, and outpatient medical care is available should you require treatment
</li><li><b>Group Life and Personal Accident Insurance </b>: The company provides Life Assurance cover
</li><li><b>End of Service Gratuity: </b>In line with UAE Labor Law, all employees are eligible for an End of Service benefit
</li><li><b>The Employee Share Plan </b>: Gives you the opportunity to purchase Wood shares and receive a match from the company
</li><li><b>Long Service Award: </b>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years&rsquo; services of our employees at 5 - year service milestones
</li><li><b>Commitment to continued professional development: </b>Development plans that are tailored to your individual needs and interests
</li><li><b>Global connections </b>: Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession
</li><li><b>Energy Transition Academy: </b>Join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems - delivered by experts in their field</li></ul></div></div></div></div>
<br><div><p><b>The key objectives for this role are:
</b></p><ul><li>Ensure robust material selection and corrosion mitigation strategies tailored for offshore environments.
</li><li>Lead integrity assessments and corrosion risk evaluations for offshore rotating equipment and structures.
</li><li>Develop and implement offshore-specific corrosion monitoring and inspection programs.
</li><li>Ensure compliance with offshore industry standards and safety regulations (e.g., NACE, API RP 2A, ISO).
</li><li>Collaborate with offshore operations, maintenance, and inspection teams to enhance asset reliability and longevity.
</li></ul><p><b>Skills:
</b></p><ul><li><b>Material Selection &amp; Specification </b>&ndash; Expertise in choosing appropriate materials for various operating conditions and environments.
</li><li><b>Corrosion Engineering </b>&ndash; Deep understanding of corrosion mechanisms, mitigation techniques, and protective coatings.
</li><li><b>Rotating Equipment Knowledge </b>&ndash; Familiarity with materials and corrosion issues specific to pumps, compressors, turbines, etc.
</li><li><b>Standards &amp; Compliance </b>&ndash; Proficient in NACE, API, ASME, ISO, and other relevant industry standards.
</li><li><b>Failure Analysis </b>&ndash; Skilled in root cause analysis and resolution of material degradation and corrosion-related failures.
</li><li><b>Inspection &amp; Monitoring </b>&ndash; Experience in developing and implementing corrosion monitoring and inspection programs.
</li><li><b>Project Leadership </b>&ndash; Ability to lead cross-functional teams and manage technical deliverables across project phases.
</li><li><b>Communication &amp; Reporting </b>&ndash; Strong technical writing and presentation skills for reporting findings and recommendations.</li></ul></div>
<br><div><div><p><b>What makes you remarkable?
</b></p></div><div><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world&rsquo;s most critical challenges.
</p></div><div><p><b>Expected:
</b></p><ul><li>Bachelor&rsquo;s Degree in Mechanical Engineering or a relevant discipline.
</li><li>Minimum 15 years of experience in oil &amp; gas projects, including at least 5 years in packaged equipment engineering.
</li><li>Offshore project experience (brownfield/greenfield) is preferred.
</li><li>Familiarity with ADNOC specifications and packaged equipment requirements.
</li><li>Proven experience in vendor coordination and conducting technical evaluations.
</li></ul><p><b>Key Skills:
</b></p><ul><li>Strong understanding of package design and interface management.
</li><li>Effective coordination and communication across disciplines and with vendors.
</li><li>Proficient in reviewing vendor documents and resolving technical clarifications.
</li><li>Skilled in preparing technical reports, technical queries (TQs), and compliance matrices.</li></ul></div></div>
<br><div><div>Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people. www.woodplc.com<br>
</div><div></div><br>
<div><b>Diversity Statement
</b></div><div>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</div></div>

Lead-Material & Corrosion Engineer

<div><p><b>Brief description of roles and responsibilities:
</b></p><p>The <b>Engineer - Corrosion &amp; Materials </b>will contribute to the delivery of materials engineering consultancy services (material and corrosion and cathodic protection) to the internal Wood business units and to Wood&rsquo;s external client base. This role is primarily based in Wood offices but may also require on-site support, both onshore and offshore.<br>
</p><p></p><p>Roles in this team are crucial for ensuring the safety, reliability, and efficiency of engineering projects and will typically support one or more of the following specialist areas:
</p><div><ul><li>Corrosion &amp; Material Selection: Providing expert advice and solutions to avoid corrosion-related problems in new projects or modifications to existing facilities.
</li></ul>Cathodic Protection (CP): Develop, review and specifiy cathodic protection systems in new projects or modifications to existing facilities.<br>
<ul><li>
</li></ul></div><p></p><p>The key high-level aspects of the role are as follows:
</p><ul><li>A competent Junior team member with typically two to four years of progressively more responsible pertinent experience.
</li><li>Contributes to the successful completion of materials engineering workscopes and consultancy services as directed by immediate supervisor; this includes material and corrosion as well as some knowledge on cathodic protection discipline.
</li><li>Assists in the development of materials engineering deliverables.
</li><li>Performs routine aspects of materials engineering assignments and collaborates with experienced technical professionals for non-routine aspects.
</li><li>Solves problems of a routine nature within clearly defined procedures
</li></ul><p><b>Accountabilities/ responsibilities
</b></p><p>Executes assigned scope of work <b>.
</b></p><ul><li>Produces basic materials engineering deliverables such as philosophies, reports, specifications, data sheets and others.
</li><li>Performs a variety of conventional engineering tasks in line with materials discipline practices, procedures and programs.
</li><li>Solves problems using a variety of standard methods, applying standard techniques involving only minor innovations of methodology to provide solutions to problems with a limited number of variables.
</li><li>Participates with drafters, technicians, and others to contribute to project completion.
</li><li>Coordinates work with other engineers and operating groups.
</li><li>Researches problems through various sources of technical information.
</li><li>Makes recommendations on the acceptability of materials supplied and work completed by contractors.
</li><li>Responsible for studies of limited scope requiring application of prescribed methods.
</li><li>Problems involves existing technology and applications, but may involve non-recurring problems.
</li><li>Demonstrates judgement in determining the methods to apply to assigned tasks.
</li><li>Makes limited changes to meet location conditions, new situations or to improve safety, economy, efficiency or applicability.
</li><li>Note-taking and active participation in design reviews.
</li><li>Review vendor documents under supervision and guidance.</li></ul></div>
<br><div><p><b>Business and Industry Experience
</b></p><ul><li>Typically requires two to four years of progressively more responsible pertinent experience.
</li><li>Ability to create functional and cost effective designs that meet specification and requirements with supervision.
</li><li>Some capability for conceptualizing designs.
</li><li>Proficient in use of design software and Database systems related to Engineering functions within their discipline.
</li><li>Ability to comprehend and interpret technical information applicable to the materials engineering discipline.
</li><li>Able to apply academic theory in a practical context.
</li><li>Awareness of standards, processes and procedures and how they are used in work execution.
</li><li>Developing level of knowledge of regulatory framework and associated legislation.
</li><li>Developing level of knowledge of industry and technology development within discipline area.
</li><li>Working knowledge of specific procedures and applications.
</li><li>Some understanding of internal economic factors affecting projects to which assigned.
</li><li>Some knowledge of competitor capabilities.
</li><li>Solid understanding of policies and procedures that apply to assignments.
</li><li>Good level of general computer literacy and familiarity with relevant specialist engineering software.</li></ul></div>
<br><div><p><b>Educational attainments
</b></p><ul><li>ISCED Level 6 Bachelors (minimum) or Level 7 Masters (preferred) Degree in engineering discipline, alternatively, tertiary level education combined with suitable industry experience can be used to demonstrate equivalence.
</li><li>Working towards Chartership or relevant professional engineer status accredited by a national or industry engineering institution.
</li><li>Demonstratable initial CPD record showing examples of technical and consulting development.</li></ul></div>
<br><div><div>Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people. www.woodplc.com<br>
</div><div></div><br>
<div><b>Diversity Statement
</b></div><div>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</div></div>

Engineer – Corrosion & Materials

<div><p><b>Title:</b></p>
Lead Engineer - Metallurgy<p></p><p><b>
&quot;Belong, Connect, Grow, with KBR !</b></p><p></p><p><b>
The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></p><p></p><p><b>
KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.&quot;</b></p><p></p><p><b>
Job Description: Lead Metallurgy Engineer</b></p><p></p><p><b>
Title:</b> <b>Lead Metallurgy Engineer</b></p><p><b>
Company:</b> KBR Corporate &ndash; Inhouse Engineering</p><p><b>
Location:</b> Abu Dhabi, UAE &mdash; KBR Office</p><div></div><p><b>
Job Purpose</b></p><ul><li>
Provide strategic metallurgical leadership for FEED and Detail Engineering projects in the Oil &amp; Gas sector.</li><li>
Develop and supervise metallurgical design bases, material selection, corrosion control strategies, and materials data sheets to ensure safe, reliable, and cost-effective solutions.</li><li>
Lead material integrity programs, failure analysis, and interfaces with process, mechanical, and reliability teams.</li><li>
Mentor engineers, drive quality and schedule adherence, and ensure compliance with applicable codes, standards, and regulatory requirements.</li></ul><div></div><p><b>
Key Responsibilities</b></p><ul><li>
Lead the selection and specification of materials for process equipment, piping, structures, and components exposed to corrosive environments and high-temperature service.</li><li>
Develop and review metallurgical design basis, material specs, data sheets, damage mechanisms (corrosion, erosion, fatigue, creep), and repair strategies.</li><li>
Conduct and supervise metallurgical analyses (corrosion rate assessments, creep/fatigue evaluation, line-of-sight failures, weldability, heat treatment, heat affected zone considerations).</li><li>
Ensure compliance with codes and standards (e.g., ASME, API, ISO, NACE, ASTM) and project-specific requirements.</li><li>
Coordinate interfaces with process, mechanical, piping, corrosion, and reliability teams; manage vendors and third-party assessments.</li><li>
Lead root cause investigations of material failures and implement corrective actions, lessons learned, and prevention plans.</li><li>
Review and approve technical deliverables (material specifications, MOC/Change Notes, design change requests, NCRs).</li><li>
Mentor and develop junior metallurgy engineers; support staffing, training, and performance reviews.</li><li>
Develop and manage execution plans, man-hour estimates, and budgets for metallurgy scope.</li><li>
Ensure QA/QC practices, drawing standards, datasheets, and requisition packages related to metallurgy.</li><li>
Support fabrication, construction, commissioning, and start-up activities; participate in inspectors' reviews and as-built documentation.</li><li>
Stay current with advances in metallurgy and corrosion science; propose value-added solutions.</li></ul><div></div><p><b>
Experience</b></p><ul><li><b>
Experience:</b> 15+ years of experience in FEED and Detail Engineering and EPCM experience in the Oil &amp; Gas industry.</li><li>
ADNOC EPC/PMC experience are highly preferred</li><li>
Demonstrated track record delivering metallurgical design and material integrity studies on FEED/detail projects.</li></ul><div></div><p><b>
Qualifications</b></p><ul><li><b>
Education:</b> Bachelor's degree in Engineering with a metallurgy/mineral/ materials focus or related field.</li><li>
Professional membership or relevant certifications (e.g., NACE, CP, CMRP) are advantageous.</li><li>
Certification related to corrosion engineering or materials (e.g., NACE Corrosion, AWS welding credentials) is a plus.</li></ul><div></div><p><b>
Technical Skills</b></p><ul><li>
Strong background in metallurgy, corrosion engineering, and materials integrity.</li><li>
Proficiency with materials selection databases, corrosion modeling tools, and welding/joint integrity assessments.</li><li>
Familiarity with FEED deliverables, MOC/Change control, and document controls.</li><li>
Knowledge of ASME, API, ISO, NFPA, ASTM standards relevant to metallurgical design.</li><li>
Experience with high-temperature alloys, corrosion-resistant materials, coatings, and linings.</li><li>
Ability to perform material degradation analyses, failure investigations, and root cause analysis.</li><li>
Excellent analytical, troubleshooting, and decision-making abilities.</li></ul><div></div><p><b>
What We Offer:</b></p><ul><li>
Opportunities for professional development and career advancement.</li><li>
Engaging and collaborative work environment with a commitment to safety and sustainability.</li></ul></div><p></p>

Lead Engineer - Metallurgy

<div><p><b>Title:</b></p>
Specialist, Corrosion/Material<p></p><p><b><i>
&quot;Belong, Connect, Grow, with KBR!
</i></b></p><p></p><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><p></p><p><b><i>
KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.&quot;</i></b></p><p></p><p>
KBR is looking for a <b>Specialist, Corrosion/Material </b>for a <b>PMC project </b>with <b>Gas Processing </b>experience to be based at <b>Sharjah.</b></p><p></p><p><b>
Experience required:</b></p><p></p><ul><li>
Minimum Overall 15+ years of oil &amp; gas experience.</li><li><b>
Previous ADNOC projects and PMC experiences are a must.</b></li><li>
Experience within EPC &amp; Detail Engineering projects.</li><li>
Experience in Projects involving Onshore/Offshore Gas Processing Plants.</li><li>
Must have at least 5 Years experience working on Onshore and offshore projects.</li><li>
Bachelor&rsquo;s degree in engineering is a must.</li></ul><p></p><p>
Interested and suitable candidates who are matching the above criteria please apply for the role. Suitable candidates will be contacted directly.</p></div><p></p>

Specialist, Corrosion/Material

Akima

<div>Company Overview:
<p></p><p><b>
Work Where it Matters</b></p><p></p><p><br>
Akima Logistics Services (ALS), an Akima company, is not just another federal logistics contractor. As an Alaska Native Corporation (ANC), our mission and purpose extend beyond our exciting federal projects as we support our shareholder communities in Alaska.</p><p></p><p><br>
At ALS, the work you do every day makes a difference in the lives of our 15,000 I&ntilde;upiat shareholders, a group of Alaska natives from one of the most remote and harshest environments in the United States.</p><p></p><p><b><br>
For our shareholders, </b>ALS provides support and employment opportunities and contributes to the survival of a culture that has thrived above the Arctic Circle for more than 10,000 years.</p><p></p><p><b><br>
For our government customers, </b>ALS delivers aviation logistics and supply chain services to the Department of Defense and federal civilian government.</p><p></p><p><b><br>
As an ALS employee, </b>you will be surrounded by a challenging, yet supportive work environment that is committed to innovation and diversity, two of our most important values. You will also have access to our comprehensive benefits and competitive pay in addition to growth opportunities and excellent retirement options.</p>
Description:
<p>
The successful candidate will function as a Field Engineer with the Terminal High Altitude Area Defense (THAAD) Missile Defense System out of the United Arab Emirates (UAE). You will perform field &amp; sustainment level maintenance type support under the THAAD Contractor Logistics Support (CLS) program. As a THAAD CLS member, you will support the lifecycle sustainment of THAAD associated hardware belonging to the UAE, under the THAAD program. The candidate will provide advice, assistance, on-the-job training, and instruction to users on the operation and maintenance of equipment and in the resolution of maintenance, integration, troubleshooting and supply problems. The candidate will aid the customer in the operation and maintenance of the THAAD Fire Control &amp; Communication (TFCC) Systems and THAAD Launching Station in accordance with established Interactive Electronic Technical Manuals (IETMs), Technical Manuals (TMs), policies, procedures, and processes. The candidate will be a member of a support team and will perform all duties under direct supervision and cross-train to gain proficiency working with other elements of the THAAD system.</p>
Responsibilities:
<ul><li>Provides field and sustainment level maintenance support to UAE THAAD Fire Units.</li><li>
Supports the customer in managing and monitoring the maintenance and sustainment program to include scheduling services, system upgrades, and modifications.</li><li>
Performs all maintenance actions and troubleshooting procedures that are above the level of the Enhanced Operator/Maintainers (EOM) to include but not limited to: Software, hardware, interconnecting cabling, electrical system, and networks.</li><li>
Creates, updates, and completes Maintenance Actions (MA) within allotted time allocated.</li><li>
Demonstrates proficiency in reading and comprehending electrical and mechanical drawings.<br>
Ability to collect, package, and deliver system data files from the TFCC and Launchers.</li><li>
Performs Packaging, Handling, Storage &amp; Transportation (PHS&amp;T) in support of UAE THAAD Battery sustainment operations.</li><li>
Supports the maintenance and calibration of all special tools and equipment.</li><li>
Supports peculiar support equipment inspections and testing for corrosion issues.</li><li>
Provide guidance and assistance to support the mitigation and prevention of corrosion on the UAE tactical system.</li><li>
Supports Missile Prevention and Maintenance Checks and Services (PMCS) and conduct annual maintenance on all missile rounds in the UAE.</li><li>
Maintains Liquid Propellant Accident Response Team (LPART) suits and equipment.</li><li>
Supports movements of Missile Rounds on tactical sites to include the constitution and de-constitution of Missile Round Pallets (MRP).</li><li>
The ability to work in an austere environment with limited western amenities.</li></ul>
Qualifications:
<ul><li>3-5 years technician experience with field &amp; sustainment operations, troubleshooting, maintenance, and repairs.</li><li>
U.S citizenship.</li><li>
U.S. Passport.</li><li>
Must possess an active security clearance SECRET level or higher.</li><li>
Must pass a background check to include criminal and credit.</li><li>
Able to meet the requirements for residence in the United Arab Emirates.</li><li>
CompTIA Security+ certification or the ability to obtain it.</li></ul><p><b>
Desired Qualifications:</b></p><ul><li>
Experience with THAAD or Patriot System(s).</li><li>
Ability to establish and maintain networks (e.g., LAN, WAN, IP address schemes).</li><li>
Working knowledge of Unix and Linux.</li><li>
Basic electrical / mechanical aptitude.</li><li>
Ability to read and interpret drawings and schematics.</li><li>
Ability to apply fault detection / fault isolation procedures.</li><li>
Basic understanding of hydraulic operations.</li><li>
Basic understanding of the Army Supply System.</li><li>
Ability to apply appropriate Packaging, Handling, Storage, and Transportation.</li><li>
Ability to manage and account for inventory.</li><li>
Demonstrated proficiency with Microsoft Windows Operating Systems and the Microsoft Office Suite.</li></ul>
Job ID: 2025-18823 Work Type: On-Site</div>

THAAD Field Engineer (OCONUS - Clearance)

<div><p><b>Title:</b></p>
Lead Mechanical Engineer - Rotating<p></p><p><b>
&quot;Belong, Connect, Grow, with KBR !</b></p><p></p><p><b>
The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></p><p></p><p><b>
KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.&quot;</b></p><p></p><p><b>
Job Description: Lead Mechanical Engineer - Rotating</b></p><p></p><p><b>
Title:</b> Lead Mechanical Engineer - Rotating</p><p><b>
Company:</b> KBR Corporate &ndash; Inhouse Engineering</p><p><b>
Location:</b> Abu Dhabi, UAE &mdash; KBR Office</p><div></div><p><b>
Job Purpose</b></p><ul><li>
Provide technical leadership for rotating equipment engineering within FEED and Detail Engineering projects in the Oil &amp; Gas sector.</li><li>
Define and supervise mechanical design basis, codes, and standards for rotating machinery (pumps, compressors, turbines, drivers, turbines, gearboxes, etc.).</li><li>
Ensure safety, reliability, and cost-effective solutions across front-end and detailed design phases.</li><li>
Mentor engineers, manage interfaces with other disciplines, and drive quality and schedule adherence for rotating equipment deliverables.</li></ul><div></div><p><b>
Key Responsibilities</b></p><ul><li>
Lead the mechanical design and sizing of rotating equipment and associated auxiliaries for FEED and Detail Engineering.</li><li>
Develop and review mechanical design basis, equipment specifications, datasheets, and technical bid evaluations for rotating machinery.</li><li>
Perform and supervise calculations and analyses (e.g., pump head/flow, compressor performance, rotor dynamics, vibration, mechanical seals, bearings, lubrication).</li><li>
Ensure compliance with applicable codes and standards (e.g., ASME, API, ISO, NFPA) and regulatory requirements.</li><li>
Coordinate interfaces with process, mechanical, piping, electrical, instrumentation, and civil disciplines; manage vendor and contractor drawings and inquiries.</li><li>
Lead risk assessments and safety reviews related to rotating equipment (HAZOP/HAZID, LOPA, RAM analyses, MAHV considerations).</li><li>
Review and approve technical deliverables (Equipment datasheets, MOC/Change notes, design change requests, technical queries).</li><li>
Mentor and develop junior mechanical engineers; support staffing, training, and performance reviews.</li><li>
Develop and manage execution plans, man-hour estimates, and budgets for rotating equipment scope.</li><li>
Ensure quality assurance and documentation practices, including drawing standards, datasheets, and requisition packages.</li><li>
Support field construction, commissioning, and start-up activities; address punch lists and as-built documentation.</li><li>
Stay abreast of advances in rotating equipment technology and recommend value-added solutions.</li></ul><div></div><p><b>
Experience</b></p><ul><li><b>
Experience:</b> 15+ years of experience in FEED and Detail Engineering and EPCM experience in the Oil &amp; Gas industry.</li><li>
ADNOC EPC/PMC experience are highly preferred</li><li>
Demonstrated track record delivering rotating equipment design and integration on FEED/detail projects.</li></ul><div></div><p><b>
Qualifications</b></p><ul><li><b>
Education:</b> Bachelor's of Engineering in a related field.</li><li>
Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li><li>
Certification in rotating equipment, reliability, or mechanical integrity (e.g., MTM, CI) is advantageous.</li></ul><div></div><p><b>
Technical Skills</b></p><ul><li>
Strong background in rotating equipment design, selection, and integrity assessment.</li><li>
Proficiency with mechanical design software and calculation tools (e.g., PV Elite, COMET, AFT Fathom, ANSYS for rotor dynamics, or equivalent).</li><li>
Familiarity with FEED deliverables, MOC/Change control, and document controls.</li><li>
Knowledge of piping, instrumentation, and corrosion considerations as they relate to rotating equipment.</li><li>
Experience with vibration analysis, rotor dynamics, seals, lubrication, and alignment.</li><li>
Understanding of codes and standards (ASME, API, ISO, NFPA) relevant to rotating equipment.</li><li>
Ability to perform risk assessments and safety reviews tied to mechanical systems.</li><li>
Excellent analytical, troubleshooting, and problem-solving skills.</li></ul><p></p><p><b>
What We Offer:</b></p><ul><li>
Opportunities for professional development and career advancement.</li><li>
Engaging and collaborative work environment with a commitment to safety and sustainability.</li></ul></div><p></p>

Lead Mechanical Engineer - Rotating

Explore 386+ Corrosion engineer in Abu Dhabi this September. Find roles across top companies and apply now to boost your career.