project engineer

architect engineer

design and supervision mechanical engineer Jobs in Al Khobar

design and supervision mechanical engineer

electrical draftsman

electrical engineer

design and supervision electrical engineer

LeMasters Arabia

An Engineering consultancy firm based in Al Khobar is seeking to recruit a Senior Electrical Engineer with a minimum of 8 years of experience in design and supervision. Candidates must be ready to join Immediately .<ul><li>Good Experience in all electrical system (Commercial and Industrial projects)</li><li>Proven experience in the design and supervision of Medium-voltage (33 KVA) systems for industrial facilities</li><li>Strong ability to review and analyze electrical calculations and load studies</li><li>Interviews will be conducted directly with the owner for final approval</li><li>Initial contract duration: 3 months (subject to extension based on performance and project needs)</li><li>Etab And Dialux familiar</li></ul>Job Type: Full-time

Design and Supervision Electrical Engineer

An Engineering consultancy firm based in Al Khobar is seeking to recruit a Senior Electrical Engineer with a minimum of 10 years of experience in design and supervision. Candidates must be ready to join Immediately .<ul><li>Proven experience in the design and supervision of high-voltage (33 KVA) systems for industrial facilities</li><li>Strong ability to review and analyze electrical calculations and load studies</li><li>Interviews will be conducted directly with the owner for final approval</li><li>Initial contract duration: 3 months (subject to extension based on performance and project needs)</li></ul>Job Type: Full-time

Dar Al Riyadh

<div>We are seeking a highly experienced Site Architect Engineer with a minimum of 10 years of expertise in Construction supervision (CS) projects. The successful candidate will play a crucial role in overseeing architectural activities on-site, ensuring design compliance, and contributing to the successful execution of diverse projects. 
Responsibilities:
<ul><li>Provide on-site supervision and technical guidance for architectural activities.
</li><li>Collaborate with contractors to ensure the proper execution of architectural designs.
</li><li>Ensure that architectural designs comply with approved plans, local codes, and industry standards.
</li><li>Collaborate with design teams to address any discrepancies and changes.
</li><li>Implement and enforce rigorous quality control processes to ensure the integrity of architectural installations.
</li><li>Conduct regular inspections to verify compliance with approved plans.
</li><li>Assist in the resolution of technical issues related to architectural design during construction.
</li><li>Conduct site visits to monitor and assess architectural construction activities.
</li><li>Act as a point of contact for clients regarding architectural matters on-site.
</li><li>Provide timely responses to client inquiries and concerns.
</li><li>Collaborate with multidisciplinary project teams to ensure coordinated project delivery.
</li><li>Address design coordination issues and conflicts among different engineering disciplines.
</li><li>Establish and maintain accurate records of architectural activities on-site.
</li><li>Ensure proper documentation of as-built conditions and changes.
</li><li>Stay updated on industry best practices and emerging trends in architectural engineering.
</li><li>Recommend improvements to enhance the efficiency and quality of architectural construction processes.
</li></ul>Minimum Requirements:
<ul><li>Bachelor's or Master's degree in Architecture or a related field.
</li><li>Minimum of 10 years of experience as a Site Architect Engineer in Construction supervision (CS).
</li><li>Strong knowledge of architectural design principles, codes, and standards.
</li><li>Excellent site supervision and communication skills.
</li><li>Proficient in architectural design software and tools.
</li><li>Bilingual proficiency in English and Arabic (both written and spoken).
</li><li>Professional architect license or relevant certifications.
</li><li>Experience in managing architectural activities for PMC projects within the Middle East region.</li></ul></div>

Architect Engineer

An Engineering consultancy firm based in Al Khobar is seeking to recruit a Senior Mechanical Engineer with a minimum of 10 years of experience in design and supervision. Candidates must be ready to join Immediately .<ul><li>Extensive experience in design, supervision, and industrial chiller systems</li><li>Proficient in reviewing and analyzing mechanical calculations and system performance</li><li>Interviews will be conducted directly with the owner for final approval</li><li>Initial contract duration: 3 months (subject to extension based on performance and project needs)</li></ul>Job Type: Full-time

Design and Supervision Mechanical Engineer

Worley

<div></div><div><div>Senior Electrical Field Engineer - EAS008Z</div><div>
Company: Worley</div><div>
Primary Location: SAU-EP-Al Khobar</div><div>
Job: Field Engineering</div><div>
Schedule: Full-time</div><div>
Employment Type: Employee</div><div>
Job Posting: Sep 14, 2025</div><div>
Unposting Date: Oct 14, 2025</div><div>
Reporting Manager Title: Senior Director - Project Delivery</div><div>
:</div><div></div><div> 
Building on our past. Ready for the future
Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We&rsquo;re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.
At Worley, we&rsquo;re building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and can thrive is essential to our mission of delivering sustainable change. We know that diverse and inclusive cultures are safer and more innovative. We encourage applications from candidates from all backgrounds and diversity characteristics and warmly encourage disabled or neurodivergent candidates to apply
Responsibilities<ul><li>
Deliver electrical engineering services that meet Worley, its customers, and applicable statutory and regulatory specifications, on time and within budget.</li><li>
Overseeing the project activities</li><li>
Supervision of subcontract activities at Site on behalf of Client.</li><li>
Support Client in routine project proceedings and activities</li><li>
Progress report, tracking etc.,</li><li>
Perform electrical engineering services such as:</li></ul><ul><li>
Identify and report changes to project scope.</li><li>
Assist with the preparation of proposals, estimates, budgets, and schedules.</li><li>
Provide assistance during procurement, construction and commissioning activities. For example, write requisitions, conduct technical bid evaluations, and write purchase orders.</li><li>
Contribute to appropriate studies, analyses and recommend actions.</li><li>
Assist with the preparation of detailed designs and drawings, specifications, data, calculations, and reports.</li></ul><ul><li>
Keep up to date with the latest developments and technical innovations in electrical engineering.</li><li>
Communicate effectively with the electrical engineering team and project stakeholders, including the Customer.</li><li>
Identify issues and problems, develop appropriate solutions, and ask for assistance when required.</li></ul>
Technical and Industry Experience<ul><li>
Sound technical and practical engineering skills and ability to consistently deliver quality, accurate and timely work to Worley and its customers.</li><li>
A working knowledge of the fundamental requirements of electrical engineering, and the basic requirements of other engineering fields.</li><li>
A working knowledge of applicable local and international standards and statutory and regulatory specifications.</li><li>
Competent use of electrical engineering specific software and relevant software such as MS Office Suite.</li></ul></div><div>
Education &ndash; Qualifications, Accreditation, Training
 Required:<ul><li>
A recognized degree in the relevant engineering discipline or equivalent.</li></ul>
Preferred:<ul><li>
Undertaking Chartered Professional Engineer (CPEng) status.</li></ul>
Moving forward together
We&rsquo;re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.
We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.
And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.
Whatever your ambition, there&rsquo;s a path for you here. And there&rsquo;s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</div></div>

Senior Electrical Field Engineer

Lucy Group

<div>Job Advert
Internal Job Title: Sr Engineer - Production Engineering 
Business: Lucy Switchgear Arabia 
Location: Dammam, Saudi Arabia 
Job Reference No: 4171 
As a Senior Production Engineer you will be responsible for Lucy Switchgear Arabia's production engineering Activities, which includes CNC programming, implementation of the new technologies for process improvement, cost reduction &amp; lean manufacturing. Supporting production in the new product introduction and current product improvements / trails &amp; implementing automation solutions (Robotic &amp; Non-Robotic). You will develop, establish, maintain, improve, and create new Production Process across the organization. 
Job Dimensions<ul><li> Coordinate all Production Engineering Activities in Lucy Saudi Arabia aligned with Global Operations Team.</li><li> Ensure that all HSE, Quality, Inventory, On Time Delivery, and Productivity Requirements are being followed by the whole value chain.</li></ul> 
Key Accountabilities
The position is responsible to:
Laser/Punch/Bending/Robot Programming:
a) Manage the team of programmers to meet the Laser &amp; Bending Programming target of LSA in line with the production plan.
b) Programming improvement on a continuous scale to achieve higher nesting efficiency as per budgeted target.
c) Guide programmers to improve Laser Efficiency by implementing new technologies. 
Production Engineering Activities:
Fulfil below requirements as per LSA Production requirements:
a) Jigs, Fixtures and Templates.
b) Factory Layout.
c) Std Time.
d) Punching/Bending Tools.
e) Special tools &amp; Equipment&rsquo;s. 
New Product Introduction
a) Provide support to production for new product introduction.
b) Provide support to Production/QA on process flow charts, facility requirements, tool requirement, jigs &amp; fixtures requirement, equipment for new processes, layout during NPI.
c) Capex calculation for requirements related to NPI.
d) Generation of work instruction for the new product. 
Process Improvements / Automations / Innovations: 
a) Robotics.
b) Non robotics.
c) New technologies.
d) New Machines for better process. 
Current Product Improvements
a) Analysis &amp; Problem solving.
b) 8D &amp; other Methodology.
c) Design improvements feedback to Engineering.
d) Trialling &amp; implementing proposed improvements.
e) Creating work environment to meet quality standards set by ISO 9001/14001.
f) BOM validation and error reporting to Contracts for corrective actions (ECR/ECN process).
g) Build Work Instructions. 
Lean Management
a) Eliminate Waste Activities.
b) Coordinate and Monitor the CI Activities for optimizing process flow and implementing Lean Tools.
c) Total cycle time (throughput time) reduction. 
System Management (D365) &amp; Management Reporting:
a) Ensure to submit/ Circulate all management reports on time.
b) D365 activities related to the Department (Route etc).
c) Manage raw material (sheet Steel) requirements as per program released through transfer orders process in coordination with Stores &amp; Production. 
Training
a) Conduct Training to workers on Product and other technical aspects of product. 
Health &amp; Safety
a) Facilitate safe working environment for people and implement H&amp;S guidelines and regulations. 
General
a) Undertake any other duties and responsibilities as required / instructed to maintain and / or improve the efficiency, quality and service provided by the company.
b) Comply with all company policies and procedures and maintain confidentiality of information relating to the company&rsquo;s business and staff. 
Qualifications, Experience &amp; Skills<ul><li> Bachelor&rsquo;s degree in mechanical / electrical / industrial engineering.</li><li> Minimum 5 years&rsquo; experience on relevant skills as detailed above.</li><li> Knowledge in ISO standards and Health, Safety standards.</li><li> Experience in development Production Layouts.</li><li> Green or Black Belt Lean Six sigma certified.</li><li> Experience in assembly plants in a reputed organization, preferably switchgear industry will be added as advantage.</li><li> 3D Design software Knowledge (Inventor/ Solid works/ Catia/ Unigraphics/ etc).</li><li> Experience in development of Jigs, Fixtures, and Templates.</li><li> Should be well versed in understanding engineering drawings.</li><li> Incorporating better material handling solutions.</li><li> Experience in electrical switchgear products and knowledge.</li><li> CNC Programming Knowledge.</li></ul>
Behavioural Competencies<ul><li> Teamwork &amp; Accountability.</li><li> Ability to work with people from different nationalities.</li><li> Flexible in approaching, to improvise in dynamic situations.</li><li> Amicable personality to make long term relations with internal and external stake holders.</li><li> Self-starter and takes initiative for additional responsibilities and challenges.</li><li> Work independently with minimal supervision.</li></ul> 
Does this sound interesting? We would love to hear from you. Our application process in quick and easy. Apply today!</div>

Senior Industrial Engineer

GE Vernova

<div><h1 class="jobSectionHeader">Job Description Summary</h1>
The Grid Automation Customer Support Center of Excellence (CoE) is responsible for the overall after sales support process and function at Grid Automation level and the global center of excellence team at PL level, to develop best practices on Customer Support, and lead the Product Lines to achieve strategic objectives defined for GA business. 
The Customer Support Solutions Lead Engineer provides support to Grid Automation regional units to design, promote and execute a differentiated offer and solve after sales issues for all GA Solutions portfolio in Transmission, Distribution, and Industry segments. He/She collaborates with the Regions, Global Supply Chain, Quality, Product Management and R&amp;D teams as required to solve customer requests and define best practices for 1st class customer support.<h1 class="jobSectionHeader">
Job Description</h1>
Essential Responsibilities
The Customer Support Solutions Lead Engineer is responsible to support GA regions on the following topics:<ul><li>
 Design of solutions for Substation control, Protection and Monitoring for innovative projects, identification of the conformity of standard solutions with customer requirements, and of the possible specific developments and customization of SA product portfolio</li><li>
Design of demonstrators (Proof of Concept) for qualification purpose, promotion, or within the execution of customer projects</li><li>
Differentiate GA (Grid Automation) offer and bring the most attractive offering to customer needs in term of total cost of ownership, flexibility (adaptability to electrical network operations and maintenance), performances, and life cycle management.</li><li>
Define engineering strategy, for the design of the system architecture regarding interfaces with the primary equipment, communication with IEDs and SCADA, arrangement and setting of the physical and logical communication network, redundancies of all the critical features, optimization of system functions for protection, control, maintenance, data modeling.</li><li>
Audit the project basic and detailed design from regional teams on critical projects at global or regional level, audit of architectures, data bases, validation plans,</li><li>
Consolidation of application libraries with customer use cases and design templates to be shared with GA (Grid Automation) Sales, Tendering, Operations, and GA (Grid Automation) partners in the regions. They will include architectures with corresponding use cases, templates of design documents, data base templates for electrical and graphical data, &hellip;</li><li>
Coaching and expertise development of the regional teams so that they can deliver innovative projects fitting with customer expectations.</li><li>
Site investigations, lead of taskforces on strategic projects</li></ul>
His/her missions cover the complete GA (Grid Automation) PAC portfolio of products and solutions:<ul><li>
Distributed and digital control system DS Agile, including C264 BCU, AView HMI, ethernet switches, RTU platforms iBox, D20, D25, D400, G500&hellip;</li><li>
Engineering and maintenance tools, Cyber Security solutions and services</li><li>
Applications of electrical network management.</li></ul>
Reporting : Solutions L3 support Leader
Qualifications/Requirements
<ul><li>Bachelor&rsquo;s degree from an accredited university or college and/or equivalent knowledge/experience in Electrical Engineering</li><li>
Very strong experience of leading technical project execution in grid automation portfolios</li><li>
Good knowledge of Power System and Substation Control.</li><li>
Excellent written/oral communication and interpersonal skills, customer focused.</li><li>
Strong experience with computer technology, protection and control system design, validation, commissioning, cyber security, communication protocols as IEC61850, IEC 103, Modbus, DNP3.0, TCP/IP, Ethernet</li><li>
Strong analytical skills with ability to identify and explain critical issues.</li><li>
Must be able to handle multiple projects simultaneously within stringent time constraints, requires discretion and independent judgment, and the ability to maintain a good working relationship with all co-workers, stakeholders, and clients.</li><li>
Willingness and ability to travel 25% of the time.</li><li>
English (written/spoken) mandatory for the position.</li><li>
The legal right to work in KSA without company sponsorship or time restriction.
</li></ul>Desired Characteristics
<ul><li>Good knowledge of Protection Applications for Transmission, Generation, and Industry segments.</li><li>
Familiarity with product Quality metrics, MTBF, FMEA/HAZOP, cybersecurity, and functional safety.</li></ul><h1 class="jobSectionHeader">
Additional Information</h1><div><div><div><div><div><div><div>
Relocation Assistance Provided: No</div></div></div></div></div></div></div></div>

Customer Support Solutions Engineer-1

Explore 476+ Design and supervision electrical engineer in Al Khobar this September. Find roles across top companies and apply now to boost your career.

476 design and supervision electrical engineer jobs IN Al Khobar

Design and Supervision Electrical Engineer

Design and Supervision Electrical Engineer

Architect Engineer

Design and Supervision Mechanical Engineer

Senior Electrical Field Engineer

Senior Industrial Engineer

Customer Support Solutions Engineer-1