design engineer

Larsen & Toubro

<div>
 
 
 Purpose of the Role
 
 
 
 
 To develop, review, and support engineering design deliverables for offshore modular fabrication projects, ensuring compliance with project specifications, international codes, constructability, and fabrication yard requirements.
 
 
 
 
 Key Responsibilities
 
 
 
 
 <ul>
 <li>
 Prepare and review design and fabrication drawingsfor offshore modules, including:
 </li>
 <ul>
 <li>
 Structural steel modules
 </li>
 <li>
 Skids, frames, decks, and pipe racks
 </li>
 </ul>
 <li>
 Develop GA drawings, shop drawings, fabrication drawings, and as-built documentation.
 </li>
 <li>
 Ensure all designs comply with project specifications, client requirements, and applicable international standards.
 </li>
 <li>
 Coordinate closely with fabrication, production, QA/QC, and planning teams to ensure design constructability and minimize site issues.
 </li>
 <li>
 Participate in constructability reviews and value engineering exercises.
 </li>
 </ul>
</div>

Design Engineer

<div>
 <ul>
 <li>
 Work under the guidance of Lead Engineer / Engineer
 </li>
 <li>
 Preparation of Fabrication drawings through AutoCAD or AutoSpool or SpoolGen
 </li>
 <li>
 Check the drawings and design documents for correctness before submitting them to Lead Engineer/Engineer.
 </li>
 <li>
 Bring to the notice to Lead Engineer/Engineer promptly, any problem faced, or discrepancies found during work
 </li>
 <li>
 Generate Drawing Templates based on Design Drawings.
 </li>
 <li>
 Site survey, Manual drafting.
 </li>
 <li>
 Preparation of As-Built drawings
 </li>
 <li>
 Preparation and checking of drawing MTO
 </li>
 <li>
 Preparation of layouts &amp; Nesting sheet.
 </li>
 <li>
 Preparation of AutoCAD 3D model.
 </li>
 <li>
 Preparing and tracking of documents.
 </li>
 <li>
 Carry out necessary data uploading for SAP, eALPS.
 </li>
 <li>
 Carry out other activities as required/asked by seniors from time to time.
 </li>
 <li>
 Preparation of Hydrotest packs.
 </li>
 <li>
 Comply with HSE rules of company.
 </li>
 <li>
 Making manual sketches/ drawings with paper and pencil
 </li>
 <li>
 Good organizational skills, attention to detail and communication skills
 
 
 </li>
 </ul>
 
 Proficiency
 
 
 
 <ul>
 <li>
 Minimum 2 yr working experience in AutoSpool or Spoolgen or Any other 3D model (Related to Piping).
 </li>
 <li>
 Knowledge on Navis Work software
 </li>
 <li>
 Should be experienced with Piping detailing and drafting
 </li>
 <li>
 Experienced with Isometric drawings by referring to General arrangement drawings as per requirement
 </li>
 <li>
 Experienced with Template and Report customization as per requirement
 </li>
 <li>
 Experienced with Oil &amp; Gas related projects (offshore or Onshore)
 
 
 </li>
 </ul>
 
 Software Expertise
 
 
 
 Autospool or Spoolgen
 
 
 Navis works
 
 
 AUTO CAD (2D &amp; 3D)
 
 
 MS office
</div>

Piping Design Engineer

WSP in the Middle East

<div>
 
 Job Description
 
 
 
 Wet Utilities Design Engineer will be responsible for designing water supply, firefighting, irrigation, stormwater, and wastewater networks in accordance with Oman authority standards. The role requires strong technical skills in hydraulic design, preparation of construction documentation, and coordination with multidisciplinary teams. This position is ideal for an engineer with around 5 years of experience in wet utilities design for infrastructure or development projects.
 
 
 
 Responsibilities
 
 
 
 <ul>
 <li>
 Prepare detailed designs for water supply, TSE/irrigation, wastewater, and stormwater networks in line with Oman authority regulations.
 </li>
 <li>
 Develop hydraulic calculations, pipe sizing, network modeling, and design layouts using relevant engineering software.
 </li>
 <li>
 Prepare drawings, design reports, BOQs, technical notes, and specifications for tender and construction phases.
 </li>
 <li>
 Coordinate with civil, structural, and other engineering disciplines to ensure seamless integration of wet utility systems.
 </li>
 <li>
 Review topographical surveys, hydrological studies, and geotechnical data to inform design decisions.
 </li>
 <li>
 Conduct wet utility network modeling (e.g., EPANET, WaterCAD, SewerCAD, StormCAD or equivalent).
 </li>
 <li>
 Liaise with Oman authorities (e.g., PAEW/MADAYN/Municipality) for design submissions, approvals, and technical clarifications.
 </li>
 <li>
 Perform site visits to gather design inputs and verify existing utility conditions.
 </li>
 <li>
 Support senior engineers in value engineering, design validation, and optimization efforts.
 </li>
 <li>
 Respond to technical queries from contractors, clients, and project stakeholders during construction or permitting stages.
 
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Civil Engineering, Environmental Engineering, or a related field.
 </li>
 <li>
 Minimum 5 years of experience in wet utilities design, preferably within infrastructure or urban development projects.
 </li>
 <li>
 Strong understanding of Oman authority standards for water supply, sewerage, stormwater, and irrigation systems.
 </li>
 <li>
 Proficiency in design and modeling tools such as AutoCAD, Civil 3D, WaterCAD, SewerCAD, StormCAD, EPANET, or similar.
 </li>
 <li>
 Good understanding of hydraulic principles, pipe material specifications, manhole design, and pumping system basics.
 </li>
 <li>
 Experience preparing design documentation, reports, and BOQs.
 </li>
 <li>
 Strong communication and coordination skills with multidisciplinary teams.
 </li>
 <li>
 GCC experience and a valid driving license are advantageous.
 </li>
 <li>
 Professional memberships or relevant certifications are a plus.
 
 
 
 </li>
 </ul>
 
 Imagine a better future for you and a better future for us all.
 
 
 
 Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world.
 
 
 
 With us, you can. Apply today.
 
</div>

Engineer - Wet Utilities (Omani Nationals)

Wood

<div>
 
 Job Description
 
 
 
 
 Remarkable people, trusted by clients to design and advance the world
 
 
 
 Wood is recruiting for a Senior Concept Engineer to join our team in Oman to join its Projects team focusing on delivering across FEED and Detail design scopes of work.
 
 
 
 Responsibilities
 
 
 
 Senior Concept Engineer will execute the activities and processes associated with Business Development for feasibility, concept and pre-FEED studies that include Liquid Hydrogen, Fertilizers, Midstream, Petrochemical opportunities, under Business Development scope. Apply and expand hands-on experience in Technical and Commercial development of these projects industries and business in Oman. The position will play a key role in evaluating and selection options, defining and framing and driving the strategies, design basis, and energy and utility infrastructure via a compelling business case. The engineer shall possess excellent creative engineering and commercial skills, conceptual and strategic thinking, project and stakeholder management with strong leadership qualities, and with knowledge and experience in cost and opex estimating, technologies and processing including cryogenic operations, liquification, storage and handling of feedstock and products, transportation, and with abilities to oversee the development of the opportunity in Oman.
 
 
 
 Designing the future. Transforming the world
 
 
 
 Reflecting The Market Focus For The Office In Both Brownfield And Green Field Opportunities, Multi-skilled Personnel Are Sought, In Particular Those With Experience In
 
 
 Onshore Oil and Gas
 
 
 
 What We Can Offer
 
 
 
 <ul>
 <li>
 Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors
 </li>
 <li>
 Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice
 </li>
 <li>
 Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market
 </li>
 <li>
 Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.
 </li>
 <li>
 Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.
 </li>
 <li>
 Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession
 
 
 </li>
 </ul>
 
 Typical Responsibilities
 
 
 
 Responsible for supporting, executing and managing general activities of the opportunity development including:
 
 
 <ul>
 <li>
 Lead the development process from initiation to conceptual and pre-FEED design (basis of design)
 </li>
 <li>
 Framing the Business Opportunity
 </li>
 <li>
 Development of Project Initiation Notes along with the supporting business case and definition and implementation of the opportunities.
 </li>
 <li>
 Develop a project portfolio framework for business opportunity
 </li>
 <li>
 Conceptual design of the process facilities, utilities and offsites, storage and dispensing systems.
 </li>
 <li>
 Identification and selection of optimum technologies and design including techno commercial assessment
 </li>
 <li>
 Collaborate with others to develop and integrate production, storage, transportation, loading and unloading systems.
 </li>
 <li>
 Assess the project&rsquo;s logistics requirements and recommend the most efficient and cost ‑ effective options.
 </li>
 <li>
 Work with suppliers to identify the most efficient and cost-effective components for liquid hydrogen systems.
 </li>
 <li>
 Design of the identified and selected concept options
 </li>
 <li>
 Evaluate equipment and processes to optimize performance and ensure compliance with safety and environmental regulations
 </li>
 <li>
 Develop operating, measurement and control philosophies and organization for the integrated facilities integrating stakeholders and future plans
 </li>
 <li>
 Manage commitments and timelines and provide presentation and strategies to leadership team
 </li>
 <li>
 Manage the development and design of energy conservation projects
 </li>
 <li>
 Conduct site inspection, visits and meetings with stakeholders in Oman.
 </li>
 <li>
 Engage with other suppliers of feedstock and utilities to secure competitive supply for the project.
 </li>
 <li>
 Secure land and utilities from the land and port authorities.
 </li>
 <li>
 Engage with commercial and legal advisors as appropriate to manage the risks of the project and overall supply chain
 </li>
 <li>
 Developing Capex Class V and IV and Opex cost estimates.
 </li>
 <li>
 Develop scope for FEED study, market analysis, and Class IV cost estimate to prepare FEED packages.
 </li>
 <li>
 Work with technology licensors to create ITTs for technical and commercial proposals.
 </li>
 <li>
 Pre-qualify vendors and evaluate bidders' proposals technically, commercially, and contractually.
 </li>
 <li>
 Engage in Value Engineering activities to identify and implement optimization opportunities.
 </li>
 <li>
 Engage in Risk Assessment exercise to identify risks and develop mitigation plans as appropriate.
 </li>
 <li>
 Align project plan and deliverables with co-developers.
 </li>
 <li>
 Engage selected Consultants and Vendors for engineering study and monitor progress and quality of deliverables.
 </li>
 <li>
 Develop bankable commercial structure and work with treasury to engage financial advisors in securing bank and ECA fundings
 </li>
 <li>
 Prepare needed documentation and provide support in Peer Reviews as required for approval stages of the projects
 </li>
 <li>
 Prepare needed documentation to seek required Investment Committee, Board approvals as and when needed
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 What makes you remarkable?
 
 
 
 At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world&rsquo;s most critical challenges.
 
 
 
 Experience
 
 
 
 <ul>
 <li>
 BSc or Engineering degree
 </li>
 <li>
 Membership of a recognized professional institute preferred
 </li>
 <li>
 Minimum of 12 years' experience in the oil and gas downstream industry
 </li>
 <li>
 Experience of working with multi-national and multi-cultural project teams is strongly preferred
 </li>
 </ul>
</div>

Senior Concept Engineer

<div>
 
 Job Description
 
 
 
 Wood is currently hiring for a
 
 Senior Mechanical Engineer Rotary
 
 for a secondment role in Muscat Oman.
 
 
 Duration of this assignment is 1 year
 
 
 
 Responsibilities
 
 
 
 Senior Mechanical Engineer-Rotary executes the activities and processes associated with Mechanical and Rotating engineering at Project, under TL scope. Apply and expand hands-on experience in Engineering, Procurement, Construction, commissioning and Operation in Oil and Gas industry. Responsible for supporting and execute general engineering activities directly linked to Mechanical engineering.
 
 
 
 Designing the future. Transforming the world
 
 
 
 Reflecting the market focus for the brownfield and green field opportunities, multi-skilled personnel are sought, in particular those with experience in refinery and petrochemical industry.
 
 
 
 What We Can Offer
 
 
 
 <ul>
 <li>
 Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors
 </li>
 <li>
 Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice
 </li>
 <li>
 Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market
 </li>
 <li>
 Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.
 </li>
 <li>
 Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.
 </li>
 <li>
 Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession
 
 
 </li>
 </ul>
 
 Typical Responsibilities
 
 
 
 <ul>
 <li>
 Apply Mechanical Engineering Rotating practices, standards, and design codes.
 </li>
 <li>
 Challenge the project design assumptions and strive to bring more values to the project (value engineering)
 </li>
 <li>
 Provide innovative solutions to overcome project challenges including cost and schedule while still maintaining compliance to the design codes.
 </li>
 <li>
 Assist Mechanical engineers in delivering and reviewing engineering deliverables.
 </li>
 <li>
 Compile information from contractor reports; evaluate and analyze compiled information using Mechanical Engineering standards and codes.
 </li>
 <li>
 Provide directions and actively participate in the engineering reviews and meetings and take lead when required.
 </li>
 <li>
 Contribute to record the meetings and discussions
 </li>
 <li>
 Coordinate, prepare, and make a recording of engineering reviews as assigned by the Lead Mechanical Engineering Rotating.
 </li>
 <li>
 Follow up on the turnover of the Mechanical engineering documents.
 </li>
 <li>
 Participate in equipment selection and procurement process.
 </li>
 <li>
 Attend workshop and site inspection of Mechanical facilities as the plan permits.
 </li>
 <li>
 Attend FAT and SAT of equipment as required.
 </li>
 <li>
 Inspect project site to monitor HSE, progress, and ensure conformance to design specifications and project standards.
 </li>
 <li>
 Prepare and deliver presentations on certain subjects as the project develops.
 </li>
 <li>
 Other relevant duties as requested from time to time.
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 What makes you remarkable?
 
 
 
 At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world&rsquo;s most critical challenges.
 
 
 
 Experience
 
 
 
 <ul>
 <li>
 Minimum 15 years of experience in similar projects
 </li>
 <li>
 Mechanical Engineering Degree with relevant certification
 </li>
 <li>
 Experience in refinery and petrochemical projects preferred
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com
 
 
 
 Diversity Statement
 
 
 
 We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.
</div>

Senior Mechanical Engineer -Rotary

<div>
 
 
 Job purpose
 
 
 
 
 
 
 Identify and implement effective defect elimination of existing design faults as per engineering best practice in Mechanical and piping under Manager Engineering scope&rsquo;s through (1) Coordination, study, troubleshooting, analysis, deciding best solution and implementation strategy. (2) Development of new projects and improvements on mechanical and piping facilities (3) Preparing, reviewing, analyzing, and making cost estimates, design work connected with minor and major capital investment and expense items, for modifications and alterations to existing systems or installation of new systems, either by Maintenance Department or through external contractors, and (3) ensuring that all engineering work is completed on schedule, on budget and in accordance with project specification &amp; company requirements; in order to ensure that the equipment design meets the approved engineering design criteria, applicable code &amp; standard and functional requirements including compliance with department strategy and project specifications
 
 
 
 
 
 
 Main tasks and responsibilities
 
 
 <ul>
 <li>
 Develops performance measures analysis to support project engineering service team in updating the parameters essential for completion for their respective Work Breakdown Structures (WBS&rsquo;s).
 </li>
 <li>
 Prepares and maintains package work plans and monitor progress to achieve on-time or earlier deliveries to keep the project on schedule.
 </li>
 <li>
 Reviews &amp; approves contract development plans and contractual Scope of Work (SOW) for the execution of engineering services be it FEED or EPCC and delivers engineering packages as per Management of Change (MOC) to all concerned.
 </li>
 <li>
 Analyses recurring problems and major issues and be able to apply engineering theories, industry norms, and time-tested practices to resolve the issues.
 </li>
 <li>
 Reviews conceptual and preliminary engineering and design of piping &amp; static equipment for operational projects.
 </li>
 <li>
 Analyses and approves relevant documents such as:
 </li>
 <li>
 Design drawings &amp; layouts, Isometric drawings, BOMs, update SP3D Model
 </li>
 <li>
 Construction methodology (Method Statement)
 </li>
 <li>
 Cost Estimation &amp; Purchase Request
 </li>
 <li>
 Project proposal by the external contractor(s) in conformity with the contractual technical specifications as applicable codes &amp; standards.
 </li>
 <li>
 Work breakdown structures (WBS) and recommends appropriate modifications and revisions of piping &amp; static equipment for the new project assigned.
 </li>
 <li>
 Contract development plans and contractual Scope of Work (SOW) for the execution of engineering services and delivers engineering packages as per Management of Change (MOC) to all concerned.
 </li>
 <li>
 Ensure that all piping &amp; static equipment engineering-related and safety procedures are adhered to throughout the project duration.
 </li>
 <li>
 Designs plant modifications and follow through to project completion.
 </li>
 <li>
 Studies and evaluates proposals for plant modification or improvements and provides recommendations on workability at the implementation stage.
 </li>
 <li>
 Carry out HAZOP studies for new modifications.
 </li>
 <li>
 Participates in RCAs and conducts failure analysis of mechanical and piping systems
 </li>
 <li>
 Conduct Risk assessment, obtain expert advice from concerned departments, and ensure implementation of risk assessment results.
 </li>
 <li>
 Carries out test runs and monitor plant performance to ensure improvement in product quality.
 </li>
 <li>
 Oversee and monitors all engineering-related activities in the assigned projects to ensure timely engineering support to maintenance, external contractors, operation, planning, and others as appropriate.
 </li>
 <li>
 Develop and provide technical clarification on contractor scopes of work, evaluate bids and provide recommendations reports.
 </li>
 <li>
 Coordinate with the project team and other members of the project implementation to ensure accurate work drawings are maintained and that field changes and as-built drawings are properly documented.
 </li>
 <li>
 Develop &amp; implement fitness for service evaluation on all static equipment (Storage Tank, Pressure Vessel, Boilers, and Heat Exchangers) &amp; piping in accordance with applicable code &amp; standard.
 </li>
 </ul>
 
 Develop and provide an effective Training Program for the development of young engineers.
 
 
 
 
 
 
 Education requirements
 
 
 
 Minimum qualification required is a college graduate degree in Mechanical Engineering
 
 
 
 Language requirements
 
 
 
 Excellent knowledge of written, read, and spoken English (required)
 
 
 
 Background and experience
 
 
 
 
 Competencies and skills
 
 
 
 
 
 
 
 
 
 Bachelor
 
 
 1
 
 
 5-8 years of relevant experience
 
 
 
 
 
 
 Both:
 
 
 <ul>
 <li>
 Engineer role within the Oil &amp; Gas / Refinery / Petrochemical industry, with experience in Mechanical and Piping
 </li>
 <li>
 Experience and well versed in field investigation, inspections, troubleshooting, performance checks, data compilation, etc.
 </li>
 <li>
 Understanding of Process Plant (P&amp; ID / PFD) &amp; Engineering drawings and OEM manuals.
 </li>
 <li>
 Sound judgment in technical matters with good skills in engineering field materials specifications, integrity inspection, plant design optimization/modification, and applicable code &amp;standards.
 </li>
 <li>
 Well-versed in design concept &amp; engineering drawings, contracts, and shutdown/modification jobs.
 </li>
 <li>
 Broad understanding of relevant process on refinery/petrochemical plant &amp; equipment regarding static, piping &amp; storage tank, applicable code &amp; standard (API, ASME, ASTM, PIP &amp;, etc.), and project specs
 </li>
 <li>
 Plant troubleshooting, equipment optimization &amp; problem-solving
 </li>
 <li>
 Project &amp; Engineering Services experience such as:
 </li>
 <li>
 Piping, Static Vessel, and Above Ground Tank Design &amp; Modification
 </li>
 <li>
 Project Execution and Material Engineering
 </li>
 <li>
 Well versed in international code &amp; standard:
 </li>
 <li>
 ASME B31.1 &amp; 31.3, ASME Sec. VIII, Div. 1 &amp; 2 &amp; ASME Sec. IX
 </li>
 <li>
 API 650 / 620 &amp; API 660 awareness
 </li>
 <li>
 TEMA
 </li>
 <li>
 Knowledge of materials of constructions including CRAs and non-metallics like GRP
 </li>
 <li>
 Knowledge of engineering software:
 </li>
 <li>
 PDMS applications
 </li>
 <li>
 Working on SmartPlant tools SP3D
 </li>
 <li>
 CAESER and Navisworks
 </li>
 <li>
 Good knowledge and expertise of SAP (PM &amp; MM &amp; FM Modules) Computerized Maintenance Management Systems (CMMS)
 </li>
 <li>
 AutoCAD and Micro station (an advantage).
 </li>
 <li>
 Good knowledge of modern Operation technologies &amp; Planning techniques
 </li>
 <li>
 standards.
 </li>
 <li>
 Supervisory skills.
 </li>
 <li>
 Strong Communication skill verbal and written
 </li>
 <li>
 Personal and Team Accountability
 </li>
 <li>
 Acute Observation / Inspection skills
 </li>
 <li>
 Accurate Reporting skills
 </li>
 <li>
 Effective planning and organizing skills
 </li>
 <li>
 Proficient at interpreting Technical Drawings
 </li>
 <li>
 Problem Solving Skills
 </li>
 <li>
 Result orientation
 </li>
 <li>
 Planning and Organizing
 </li>
 <li>
 Decisiveness
 </li>
 <li>
 Exercising influence
 </li>
 <li>
 Demonstrated ability to cooperate with and influence peers
 </li>
 <li>
 Proficient at interpreting Technical Drawings
 </li>
 <li>
 SOP interpretation
 </li>
 <li>
 Knowledge of engineering best practices
 </li>
 <li>
 Refinery commissioning and start-up.
 </li>
 </ul>
 
 
</div>

Mechanical Piping Engineer

<div>
 
 Job Description
 
 
 
 
 Remarkable people, trusted by clients to design and advance the world
 
 
 
 Wood is recruiting for a Senior Pipeline Engineer to join our team in Oman.
 
 
 Duration of this assignment is one year
 
 
 
 Responsibilities
 
 
 
 
 Designing the future. Transforming the world
 
 
 
 Reflecting the market focus for the brownfield and green field opportunities, multi-skilled personnel are sought, in particular those with experience in refinery and petrochemical industry.
 
 
 
 What We Can Offer
 
 
 
 <ul>
 <li>
 Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors
 </li>
 <li>
 Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice
 </li>
 <li>
 Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market
 </li>
 <li>
 Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.
 </li>
 <li>
 Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.
 </li>
 <li>
 Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession
 
 
 </li>
 </ul>
 
 Typical Responsibilities
 
 
 
 <ul>
 <li>
 Execute the Pipeline Engineering technical detailed design scope and endeavor to bring out the best practices and approaches to deliver the technical requirements.
 </li>
 <li>
 Prepare the necessary documentation, establishing major methods and data as necessary, and ensure the selection of the optimum Pipeline design from both technical and economic standpoints.
 </li>
 <li>
 Ensure that design method, standards and data used conform to Asset Owners requirements and/or those issued by Centre of Excellence.
 </li>
 <li>
 Ensure the preparation of the Pipeline and Stress Analysis Philosophy document incorporating user requirements.
 </li>
 <li>
 In consultation with Project Delivery Skill-pool, assign appropriate Pipeline engineering resources and monitor performance to ensure all Pipeline Engineering deliverables are accomplished.
 </li>
 <li>
 Be responsible for the coordination, execution, cross country ( &gt;100 Km), size (&gt;20&rdquo;) and progress of Pipeline Engineering design.
 </li>
 <li>
 Be responsible for the accuracy of Pipeline layouts, standards, and isometrics.
 </li>
 <li>
 Be responsible for stress analysis of all Pipeline as per company procedures and/or approved international practices
 </li>
 <li>
 Be responsible for technical accuracy, quality, and economy of Pipeline engineering applications design.
 </li>
 <li>
 Liaise with Vendor&rsquo;s pears representatives and other functions on all matters relating to pipeline engineering design and execution.
 </li>
 <li>
 Ensure OQ Safety and Quality control procedures are followed during the execution of all work and that a high standard of safety is achieved in all design work.
 </li>
 <li>
 Participate pre and post contract award in discussions with Asset Owners to assess and assist in the definition of user requirements.
 </li>
 <li>
 Analyses Pipeline Engineering Deliverables and participate in project reviews and workshops.
 </li>
 <li>
 Participate in solving specific Pipeline engineering challenges that are recognized during the development of the Front End Package or detailed engineering
 </li>
 <li>
 Identify specifics gaps in existing practices and tools and manage the process of developing new practices or toolkit items that enhance OQ technological offerings.
 </li>
 <li>
 Conduct or supervise site inspection for accuracy of Pipeline and equipment including mechanical walk-downs.
 </li>
 <li>
 Be responsible for the coordination, execution, and progress of pipeline engineering design.
 </li>
 <li>
 Reports any breaches of safety procedures to supervision/management.
 </li>
 <li>
 Actively participates in and promotes company health and safety campaigns, policies and procedures, and ensures personal safety and that of colleagues at all times.
 </li>
 <li>
 Other relevant duties as requested from time to time.
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 What makes you remarkable?
 
 
 
 At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world&rsquo;s most critical challenges.
 
 
 
 Experience
 
 
 
 <ul>
 <li>
 Minimum 15 years of experience in similar projects
 </li>
 <li>
 Engineering Degree with relevant certification
 </li>
 <li>
 Experience in refinery and petrochemical projects preferred
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com
 
 
 
 Diversity Statement
 
 
 
 We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.
</div>

Senior Pipeline Engineer

Explore 45+ Design engineer in Oman this June. Find roles across top companies and apply now to boost your career.