drilling supervisor

Fugro

<div></div><div><div><div>Role Purpose</div><p>
The Critical Mineral Supervisor is responsible for the safe, efficient, and high‑quality execution of mineral exploration drilling programs. This role leads day-to-day field operations, ensuring sample integrity, compliance with HSE requirements, and delivery against drilling schedules and budgets. The supervisor acts as the primary interface between drilling contractors, exploration geologists, HSE, and field support teams.</p><p>
Key Responsibilities</p><p>
Safety, Health &amp; Environment (HSE)</p><ul><li><div>
Lead daily pre-starts, toolbox talks, and Job Hazard Analyses (JHA/JSA).</div></li><li><div>
Enforce company and contractor HSE standards, stop-work authority, and correct PPE use.</div></li><li><div>
Ensure safe operation of compressors, high‑pressure airlines, rod handling, and rig moves.</div></li><li><div>
Report and investigate incidents, near misses, and hazards; drive corrective actions.</div></li><li><div>
Ensure environmental compliance, minimal footprint, and effective site rehabilitation.</div></li></ul><p>
Operational Supervision</p><ul><li><div>
Oversee rig setup, drilling parameters, and penetration rates; adjust for performance and ground conditions.</div></li><li><div>
Verify correct bit and hammer selection, cyclone and splitter configuration, and sample recovery.</div></li><li><div>
Manage daily drilling plan execution, shift changes, consumables, and equipment readiness.</div></li><li><div>
Coordinate water/air logistics, access tracks, drill pads, and rehabilitation requirements.</div></li><li><div>
Monitor contractor performance against KPIs; escalate and resolve operational issues.</div></li></ul><p>
Sampling Quality &amp; Geological Support</p><ul><li><div>
Ensure representative, contamination‑free sampling with clean cyclones/splitters at all times.</div></li><li><div>
Confirm correct sample intervals, labeling, bagging, and security; oversee duplicates, blanks, and standards as applicable.</div></li><li><div>
Assist with preliminary chip description, sample tray preparation, and correct depth recording.</div></li><li><div>
Implement and verify QA/QC protocols and chain‑of‑custody to laboratories.</div></li></ul><p>
Data, Reporting &amp; Compliance</p><ul><li><div>
Maintain accurate daily drilling records: depths, recoveries, ROP, downtime, consumables, and issues.</div></li><li><div>
Submit daily progress reports (DPRs), time sheets/shift reports, and contractor invoices inputs.</div></li><li><div>
Track downtime categories and root causes; recommend improvements.</div></li><li><div>
Ensure adherence to permits, company policies, and relevant regulatory standards.</div></li></ul><p>
Coordination &amp; Leadership</p><ul><li><div>
Act as the primary liaison between drill crews, exploration geologists, field assistants, and logistics.</div></li><li><div>
Provide clear direction, coaching, and performance feedback to contractor crews.</div></li><li><div>
Support scheduling, prioritization of targets, and rapid plan changes based on geological results or access.</div></li><li><div>
Foster a culture of safety, respect, continuous improvement, and sample integrity.</div></li></ul><p>
Qualifications &amp; Experience</p><p>
Essential</p><ul><li><div>
10 years&rsquo; mineral exploration/drilling operations experience, with 3+ years supervising air core programs.</div></li><li><div>
Demonstrated competence with AC/RC and DD rig mechanics, cyclones/splitters, sampling theory, and contamination control.</div></li><li><div>
Proven HSE leadership, risk assessment, and incident reporting capability.</div></li><li><div>
Experience in remote field operations and contractor management.</div></li><li><div>
Valid driver&rsquo;s license and ability to work in physically demanding outdoor environments.</div></li></ul><p>
Desirable</p><ul><li><div>
Exposure to gold/base metals/REE/iron ore regolith exploration.</div></li><li><div>
Basic geological knowledge (lithology from chips, regolith profiles, drill targeting concepts).</div></li><li><div>
First Aid/CPR; H2S awareness; Working at Heights; Confined Space; Defensive/4x4 driving.</div></li><li><div>
Familiarity with GPS, tablets, digital logging apps, and sample tracking systems.</div></li><li><div>
Knowledge of downhole survey tools and rehabilitation best practice.</div></li></ul></div><div><p>
What you could be working on</p><div></div><div><div><div><div><div><div><div>
Sustainable infrastructure</div><p>
Sustainable infrastructure solutions: building resilient, green infrastructure for sustainable development</p></div><div><div>
Read more</div></div></div></div></div></div></div></div><div></div><div><div>
Disclaimer for recruitment agencies:</div><p>
Fugro does not accept any unsolicited applications from recruitment agencies. Acquisition to Fugro Recruitment or any Fugro employee is not appreciated**.**</p></div></div><p></p>

Critical Minerals Site Supervisor

MENA Business Investment Group

<div>
 <p>
  MENA-BIG is a Spanish company specialized in Recruitment Services and Human Resource Consultancy, Administration Management, International Business Development, and Strategic Consultancy with offices in: Europe, Middle East, and the Gulf Region.
 </p>
 <p>
  <br/>
 </p>
 <p>
  We are currently lookin for
  <strong>
   Assistant Drillers
  </strong>
  to support the Driller in supervising drilling operations and rig floor activities to ensure safe, efficient, and effective drilling performance in compliance with company policies, operational procedures, and HSE standards
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Drilling Operations Management
  </strong>
 </p>
 <p>
  <br/>
 </p>
 <p>
  &middot; Assist the Driller in monitoring and controlling drilling operations in accordance with the drilling program.
 </p>
 <p>
  &middot; Supervise the rig floor crew and ensure that all drilling, tripping, and casing operations are conducted safely and efficiently.
 </p>
 <p>
  &middot; Maintain close communication with the Driller and other crew members to ensure smooth operation and problem-solving.
 </p>
 <p>
  &middot; Ensure proper functioning and maintenance of drilling equipment and machinery.
 </p>
 <p>
  &middot; Monitor drilling parameters and interpret data to assist in operational decision-making.
 </p>
 <p>
  &middot; Assist in coordinating equipment maintenance, inspections, and repairs as needed.
 </p>
 <p>
  &middot; Enforce safety procedures and participate actively in safety meetings and drills.
 </p>
 <p>
  &middot; Maintain accurate records of drilling operations and equipment performance.
 </p>
 <p>
  &middot; Stand in for the Driller during breaks or when delegated.
 </p>
 <p>
  &middot; Perform other duties as assigned by the Driller or Rig Superintendent.
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Education &amp; Experience
  </strong>
 </p>
 <p>
  <br/>
 </p>
 <p>
  &middot; High school diploma or equivalent; technical or vocational training in drilling operations is an advantage.
 </p>
 <p>
  &middot; Minimum of
  <strong>
   6 years of experience
  </strong>
  in drilling operations.
 </p>
 <p>
  &middot; Good knowledge of
  <strong>
   drilling equipment, tools, and techniques.
  </strong>
 </p>
 <p>
  &middot; Strong understanding of safety and environmental regulations related to drilling.
 </p>
 <p>
  &middot; Ability to work in a team and lead crew members effectively.
 </p>
 <p>
  &middot; Physically fit and able to work in challenging onshore environments.
 </p>
 <p>
  &middot; Good command of English Language skills.
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Skills &amp; Competencies
  </strong>
 </p>
 <p>
  &middot; Leadership and supervision
 </p>
 <p>
  &middot; Strong communication skills
 </p>
 <p>
  &middot; Technical problem-solving
 </p>
 <p>
  &middot; Commitment to safety
 </p>
 <p>
  &middot; Teamwork and adaptability
 </p>
 <p>
  <br/>
 </p>
 <p>
  We look forward to receiving your applications!
 </p>
 <p>
 </p>
</div>


Assistant Driller

<div>
 <p>
  <strong>
   MENA-BIG
  </strong>
  is a Spanish company specialized in Recruitment Services, Human Resource Consultancy, Administration Management, International Business Development, and Strategic Consultancy, with offices in Europe, the Middle East, and the Gulf Region.
 </p>
 <p>
  <br/>
 </p>
 <p>
  We are seeking an experienced
  <strong>
   Rig Manager
  </strong>
  to oversee the safe, efficient, and cost-effective operations of our drilling rig. The ideal candidate will ensure compliance with the highest safety and environmental standards while leading a high-performing team and optimizing drilling operations.
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Key Responsibilities:
  </strong>
 </p>
 <p>
  <br/>
 </p>
 <ul>
  <li>
   <strong>
    Operations Management:
   </strong>
   Supervise drilling, workover, and maintenance activities, ensuring adherence to technical specifications, budget, and schedule.
  </li>
  <li>
   <strong>
    HSE Compliance:
   </strong>
   Enforce safety policies (API, OSHA, IADC, etc.), conduct risk assessments, and lead incident investigations.
  </li>
  <li>
   <strong>
    Crew Leadership:
   </strong>
   Manage rig personnel, assign duties, and provide training to enhance team performance and safety awareness.
  </li>
  <li>
   <strong>
    Equipment Maintenance:
   </strong>
   Oversee rig machinery inspections, preventive maintenance, and troubleshooting to minimize downtime.
  </li>
  <li>
   <strong>
    Stakeholder Coordination:
   </strong>
   Liaise with corporate teams, drilling engineers, and third-party vendors, providing regular operational updates.
  </li>
 </ul>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Qualifications &amp; Requirements:
  </strong>
 </p>
 <p>
  <br/>
 </p>
 <ul>
  <li>
   <strong>
    Education:
   </strong>
   Bachelor&rsquo;s degree in Petroleum/Mechanical Engineering or related field (preferred).
  </li>
  <li>
   <strong>
    Experience:
   </strong>
   15+ years in drilling operations, including 3+ years in a rig management role. GCC experience is a plus.
  </li>
  <li>
   <strong>
    Skills:
   </strong>
   Expertise in drilling programs, well control, HSE protocols, and team leadership.
  </li>
  <li>
   <strong>
    Certifications (Preferred):
   </strong>
  </li>
 </ul>
 <p>
  <br/>
 </p>
 <p>
  IWCF/IADC Well Control
 </p>
 <p>
  H2S Safety, BOSIET/HUET (offshore)
 </p>
 <p>
  NEBOSH/OSHA, First Aid
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Why Join Us?
  </strong>
 </p>
 <p>
  <br/>
 </p>
 <ul>
  <li>
   Lead critical operations in a dynamic environment.
  </li>
  <li>
   Work with industry-leading safety and technical standards.
  </li>
  <li>
   Opportunities for professional growth and mentorship.
  </li>
 </ul>
 <p>
  <br/>
 </p>
 <p>
  We look forward to receiving your applications!
 </p>
 <p>
 </p>
</div>


Rig Manager

visuna

<div><p>Job Reference: 250023</p><div><br>
</div><div><div><div><p>Upstream
</p></div></div><p></p><div><div><b>Start Date: </b>12/05/2026</div><div><b>
Applications close on: </b>01/05/2026</div><div><b>
Contract Type: </b>Contract</div><div><b>
Country: </b>Saudi Arabia</div><div><b>
Discipline: </b>Drilling</div><div><b>
Job Contact: </b>laura.hird@visuna.com</div>
</div></div><div></div><div><div><div><div><div><div><p><b>Duration:</b> 3 months<br>
<b>Location:</b> Al Khafji, Saudi Arabia<br>
<b>Work Pattern:</b> Office-based, 5 days per week</p>
<p></p>
<p>We are looking for a senior Drilling Engineering expert to develop a detailed, execution-ready drilling and evaluation program for an appraisal well.</p>
<p></p>
<p><b>Key Responsibilities:</b></p>
<ul>
<li>Review subsurface, geological, and offset well data</li>
<li>Define well objectives and data acquisition plans</li>
<li>Design well trajectory and drilling engineering programs (fluids, casing, hydraulics, well control)</li>
<li>Develop full drilling and evaluation program (logging, coring, testing)</li>
<li>Conduct risk assessment, contingency planning, and cost estimation</li>
</ul>
<p></p><ul><li>20+ years of drilling engineering experience</li></ul>
<ul><li>Strong expertise in appraisal well planning and program development</li></ul>
<ul><li>Experience in well design, risk management, and integrated well delivery</li></ul>
<p>
</p><h3 class="jobSectionHeader"><b>Benefit of Working with Visuna?
</b></h3><p></p><ul><li>A dedicated member of the team responsible for your placements and welfare</li>
<li>Some of the best day rates in the industry</li>
<li>FREE worldwide insurance and Medevac cover whist on a Placement</li>
<li>24/7 access to our specialist support team</li>
<li>Assistance and advice on a range of business topics</li>
<p></p>
<li>FREE access to our Competency Scheme</li>
<li>Increased exposure to potential clients and more placement opportunities</li></ul></div></div></div></div></div></div></div><p></p>

Drilling Engineering Lead – Appraisal Well Program

Projects Pioneers Contracting Company

<p>Job Title</p><p><b>Driller / Mining Driller</b></p><p>Job Summary</p><p>The Driller is responsible for operating and monitoring drilling equipment to complete production, exploration, grade-control, blast-hole, or water-related drilling activities safely and efficiently at mine sites. The role supports daily mining operations by ensuring holes are drilled to the required depth, angle, diameter, and location in line with mine plans, safety standards, and site procedures. In Saudi Arabia, this role is typically performed within a regulated mining environment overseen by the Ministry of Industry and Mineral Resources, with strong emphasis on safety, compliance, and technical discipline.</p><p>Key Responsibilities</p><ul><li>Operate drilling rigs and related equipment safely and efficiently.</li><li>Drill blast holes, exploration holes, grade-control holes, or dewatering holes as required by the mine plan.</li><li>Read and follow drilling patterns, bench layouts, coordinates, and supervisor instructions.</li><li>Check hole depth, angle, alignment, and collar position to ensure accuracy.</li><li>Conduct pre-start inspections and routine daily equipment checks.</li><li>Monitor drilling parameters such as penetration rate, pressure, rotation, and bit wear.</li><li>Replace drill bits, rods, hammers, and other consumables when needed.</li><li>Report equipment defects, abnormal ground conditions, and safety hazards immediately.</li><li>Maintain drilling logs, shift reports, meter readings, and production records.</li><li>Coordinate with blasting, survey, geology, maintenance, and mine operations teams.</li><li>Keep the rig, tools, and work area clean and in safe working condition.</li><li>Follow all site HSE rules, permit systems, isolation procedures, and emergency response requirements.</li></ul><p>HSE Responsibilities</p><ul><li>Comply with company HSE policies, mine rules, and toolbox talk instructions.</li><li>Wear mandatory PPE at all times.</li><li>Stop work if unsafe conditions exist.</li><li>Inspect work area for ground instability, highwalls, loose rocks, poor access, or other hazards.</li><li>Ensure safe handling of fuel, lubricants, compressed air, and drilling consumables.</li><li>Report incidents, near misses, unsafe acts, and unsafe conditions.</li><li>Support environmental controls such as dust suppression, spill prevention, and waste handling.</li></ul><p>Qualification Requirements</p><ul><li>High school, technical certificate, or vocational training preferred.</li><li>Valid operator certification or drilling equipment training preferred.</li><li>Experience operating surface or underground drilling rigs in mining, quarrying, or heavy civil works.</li><li>Good understanding of drilling methods, hole deviation control, and basic rig maintenance.</li><li>Ability to work in remote sites, shift rotations, and harsh weather conditions.</li></ul><p>Skills Required</p><ul><li>Safe rig operation</li><li>Basic mechanical troubleshooting</li><li>Knowledge of drilling tools and consumables</li><li>Ability to read plans and drilling instructions</li><li>Communication and teamwork</li><li>Recordkeeping and reporting</li><li>Physical fitness and field discipline</li></ul><p>Preferred Experience</p><ul><li>Experience in <b>open-pit mining</b>, <b>underground mining</b>, or <b>exploration drilling</b></li><li>Experience with OEM rigs such as Sandvik, Epiroc, Atlas Copco, or similar</li><li>Familiarity with drilling and blasting operations</li><li>Experience working under strict mining safety systems</li></ul><p>Reporting Line</p><p>Typically reports to:<br/><b>Drilling Supervisor / Mine Supervisor / Drill &amp; Blast Supervisor</b></p><p>Job Type: Full-time</p><p>Pay: ﷼6,500.00 - ﷼7,500.00 per month</p>

Drillers ( RC & DD for Mining company)

<div>
 <strong>
  Job Description
  <br/>
  <br/>
 </strong>
 <em>
  T
 </em>
 <em>
  he maintenance supervisor will work hand in hand with the workshop supervisor to ensure maximum efficiency. The responsibilities of both roles will be
  <br/>
  <br/>
 </em>
 <strong>
  Key Responsibilities &ndash; Maintenance Supervisor
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Maintenance Planning &amp; Execution
  </li>
  <li>
   Plan, schedule, and supervise preventive and corrective maintenance for drill rigs and associated equipment (top drives, mud pumps, draw works, engines, hydraulics, pneumatics).
  </li>
  <li>
   Ensure maintenance activities minimize rig downtime and support continuous drilling operations.
  </li>
  <li>
   Review maintenance histories and adjust schedules based on equipment performance and failure trends.
  </li>
  <li>
   Supervision &amp; Leadership
  </li>
  <li>
   Lead, coach, and supervise mechanics, electricians, and technicians assigned to the rigs.
  </li>
  <li>
   Assign daily work tasks and verify job completion quality.
  </li>
  <li>
   Provide on-the-job training and mentoring to improve team technical competency.
  </li>
  <li>
   Equipment Reliability &amp; Troubleshooting
  </li>
  <li>
   Diagnose complex mechanical, hydraulic, and electrical faults on drilling equipment.
  </li>
  <li>
   Coordinate major repairs, overhauls, and component replacements.
  </li>
  <li>
   Liaise with OEMs and vendors for technical support, upgrades, and warranty issues.
  </li>
  <li>
   Safety, Health &amp; Environment (HSE)
  </li>
  <li>
   Enforce compliance with HSE policies, company procedures, and regulatory requirements.
  </li>
  <li>
   Conduct toolbox talks, job safety analyses (JSA), and risk assessments.
  </li>
  <li>
   Investigate equipment-related incidents and implement corrective actions.
  </li>
  <li>
   Documentation &amp; Reporting
  </li>
  <li>
   Maintain accurate maintenance records, inspection logs, and spare‑parts usage.
  </li>
  <li>
   Prepare daily, weekly, and monthly maintenance reports for rig management.
  </li>
  <li>
   Support audits, inspections, and asset integrity reviews.
  </li>
  <li>
   Spare Parts &amp; Cost Control
  </li>
  <li>
   Manage spare parts inventory, ensuring availability of critical components.
  </li>
  <li>
   Forecast maintenance budgets and control costs without compromising safety or reliability.
  </li>
  <li>
   Review and approve work orders and material requisitions.
  </li>
  <li>
   Coordination &amp; Communication
  </li>
  <li>
   Work closely with workshop supervisor, drilling supervisors, senior department members, and HSE teams.
  </li>
  <li>
   Support rig moves, commissioning, and de‑commissioning activities.
  </li>
  <li>
   Ensure maintenance work aligns with drilling plans and operational priorities.
   <br/>
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Education
  <br/>
  <br/>
 </strong>
 <em>
  <strong>
   Qualifications Required
   <br/>
   <br/>
  </strong>
 </em>
 <strong>
  Diploma Or Degree In
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Mechanical Engineering
  </li>
  <li>
   Electrical Engineering
  </li>
  <li>
   Heavy Equipment / Industrial Maintenance
  </li>
  <li>
   Technical or trade certification accepted with strong experience.
   <br/>
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Experience
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   8&ndash;12+ years in drilling rig or heavy equipment maintenance.
  </li>
  <li>
   3&ndash;5 years in a supervisory or lead role.
  </li>
  <li>
   Experience with land rigs, near shore rigs, mining rigs. (depending on operation).
   <br/>
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Technical Competencies
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Diesel engines and power generation systems
  </li>
  <li>
   Hydraulic and pneumatic systems
  </li>
  <li>
   Electrical troubleshooting (AC/DC, PLC basics preferred)
  </li>
  <li>
   API and OEM maintenance standards
  </li>
  <li>
   Familiarity with CMMS systems and maintenance planning tools.
  </li>
  <li>
   Safety &amp; Compliance
  </li>
  <li>
   Strong understanding of
  </li>
  <ul>
   <li>
    Lock‑out / tag‑out (LOTO)
   </li>
   <li>
    Permit to work systems
   </li>
   <li>
    Hazard identification and risk management
    <br/>
   </li>
  </ul>
  <li>
   Leadership &amp; Personal Skills
  </li>
  <li>
   Strong leadership and decision making abilities.
  </li>
  <li>
   Excellent communication skills.
  </li>
  <li>
   Ability to work under pressure in remote and rotational environments.
  </li>
  <li>
   High level of accountability and safety awareness.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Disclaimer For Recruitment Agencies
  <br/>
  <br/>
 </strong>
 <strong>
  Fugro does not accept any unsolicited applications from recruitment agencies. Acquisition to Fugro Recruitment or any Fugro employee is not appreciated
 </strong>
 <strong>
  .
 </strong>
</div>


Workshop and Maintenance Supervisor - OSI

<div></div><div><div><div><i>T__he maintenance supervisor will work hand in hand with the workshop supervisor to ensure maximum efficiency. The responsibilities of both roles will be:</i></div><p><i>
Key Responsibilities &ndash; Maintenance Supervisor:</i></p><p>
1. Maintenance Planning &amp; Execution</p><ul><li><div>
Plan, schedule, and supervise preventive and corrective maintenance for drill rigs and associated equipment (top drives, mud pumps, draw works, engines, hydraulics, pneumatics).</div></li><li><div>
Ensure maintenance activities minimize rig downtime and support continuous drilling operations.</div></li><li><div>
Review maintenance histories and adjust schedules based on equipment performance and failure trends.</div></li></ul><p>
2. Supervision &amp; Leadership</p><ul><li><div>
Lead, coach, and supervise mechanics, electricians, and technicians assigned to the rigs.</div></li><li><div>
Assign daily work tasks and verify job completion quality.</div></li><li><div>
Provide on-the-job training and mentoring to improve team technical competency.</div></li></ul><p>
3. Equipment Reliability &amp; Troubleshooting</p><ul><li><div>
Diagnose complex mechanical, hydraulic, and electrical faults on drilling equipment.</div></li><li><div>
Coordinate major repairs, overhauls, and component replacements.</div></li><li><div>
Liaise with OEMs and vendors for technical support, upgrades, and warranty issues.</div></li></ul><p>
4. Safety, Health &amp; Environment (HSE)</p><ul><li><div>
Enforce compliance with HSE policies, company procedures, and regulatory requirements.</div></li><li><div>
Conduct toolbox talks, job safety analyses (JSA), and risk assessments.</div></li><li><div>
Investigate equipment-related incidents and implement corrective actions.</div></li></ul><p>
5. Documentation &amp; Reporting</p><ul><li><div>
Maintain accurate maintenance records, inspection logs, and spare‑parts usage.</div></li><li><div>
Prepare daily, weekly, and monthly maintenance reports for rig management.</div></li><li><div>
Support audits, inspections, and asset integrity reviews.</div></li></ul><p>
6. Spare Parts &amp; Cost Control</p><ul><li><div>
Manage spare parts inventory, ensuring availability of critical components.</div></li><li><div>
Forecast maintenance budgets and control costs without compromising safety or reliability.</div></li><li><div>
Review and approve work orders and material requisitions.</div></li></ul><p>
7. Coordination &amp; Communication</p><ul><li><div>
Work closely with workshop supervisor, drilling supervisors, senior department members, and HSE teams.</div></li><li><div>
Support rig moves, commissioning, and de‑commissioning activities.</div></li><li><div>
Ensure maintenance work aligns with drilling plans and operational priorities.</div></li></ul><p><i>
Qualifications Required:</i></p><p>
Education:</p><p>
Diploma or Degree in:</p><ul><li><div>
Mechanical Engineering</div></li><li><div>
Electrical Engineering</div></li><li><div>
Heavy Equipment / Industrial Maintenance</div></li><li><div>
Technical or trade certification accepted with strong experience.</div></li></ul><p>
Experience:</p><ul><li><div>
8&ndash;12+ years in drilling rig or heavy equipment maintenance.</div></li><li><div>
3&ndash;5 years in a supervisory or lead role.</div></li><li><div>
Experience with land rigs, near shore rigs, mining rigs. (depending on operation).</div></li></ul><p>
Technical Competencies:</p><ul><li><div>
Diesel engines and power generation systems</div></li><li><div>
Hydraulic and pneumatic systems</div></li><li><div>
Electrical troubleshooting (AC/DC, PLC basics preferred)</div></li><li><div>
API and OEM maintenance standards</div></li><li><div>
Familiarity with CMMS systems and maintenance planning tools.</div></li><li><div>
Safety &amp; Compliance</div></li><li><div>
Strong understanding of:</div><ul><li><div>
Lock‑out / tag‑out (LOTO)</div></li><li><div>
Permit to work systems</div></li><li><div>
Hazard identification and risk management</div></li></ul></li><li><div>
Leadership &amp; Personal Skills</div></li><li><div>
Strong leadership and decision making abilities.</div></li><li><div>
Excellent communication skills.</div></li><li><div>
Ability to work under pressure in remote and rotational environments.</div></li><li><div>
High level of accountability and safety awareness.</div></li></ul></div><div><p>
What you could be working on</p><div></div><div><div><div><div><div><div><div>
Sustainable infrastructure</div><p>
Sustainable infrastructure solutions: building resilient, green infrastructure for sustainable development</p></div><div><div>
Read more</div></div></div></div></div></div></div></div><div></div><div><div>
Disclaimer for recruitment agencies:</div><p>
Fugro does not accept any unsolicited applications from recruitment agencies. Acquisition to Fugro Recruitment or any Fugro employee is not appreciated**.**</p></div></div><p></p>

Search 9147+ Drilling supervisor jobs near you this March. New roles added regularly across leading industries. Apply today.

9147 drilling supervisor jobs Near Me

Critical Minerals Site Supervisor

Assistant Driller

Rig Manager

Drilling Engineering Lead – Appraisal Well Program

Drillers ( RC & DD for Mining company)

Workshop and Maintenance Supervisor - OSI

Workshop and Maintenance Supervisor - OSI