electromechanical inspector

Human Capital Group

Responsibilities:<ul><li>Review mechanical design drawings, HVAC calculations, plumbing layouts, shop drawings, builders' work drawings, material submittals and method statements to ensure compliance with project specifications, Qatar Energy standards, UDC requirements and applicable codes.</li><li>Supervise and inspect the installation of all mechanical systems including HVAC, chilled water modifications, air distribution systems, VAV boxes, FCUs, ductwork, piping, insulation, ventilation systems, plumbing, drainage and associated mechanical equipment.</li><li>Coordinate mechanical works with architectural, structural, electrical, ELV and fire protection disciplines to ensure clash-free installation and compliance with approved designs.</li><li>Review equipment selections and verify compliance with approved schedules, energy efficiency requirements and manufacturer recommendations.</li><li>Monitor construction progress, identify technical issues, review inspection requests, issue observations and non-conformance reports (NCRs), and verify corrective actions.</li><li>Witness pressure testing, flushing, duct leakage testing, Testing Adjusting &amp; Balancing (TAB), pre-commissioning and commissioning activities.</li><li>Review commissioning procedures, TAB reports, functional performance testing reports and Operation &amp; Maintenance Manuals.</li><li>Participate in factory inspections, material inspections, mock-ups, site acceptance tests (SAT), integrated systems testing and final handover inspections.</li><li>Ensure all mechanical works comply with Qatar Construction Specifications (QCS), Qatar Civil Defense (QCD), ASHRAE, SMACNA, NFPA and other applicable international standards.</li><li>Maintain accurate project documentation including RFIs, technical submittals, inspection records, commissioning reports and as-built documentation.</li></ul>Requirements:<ul><li>Bachelor's Degree in Mechanical Engineering.</li><li>Minimum 10 years of professional experience in mechanical engineering, construction supervision, or project management, including at least 5 years of experience in commercial office fit-out projects.</li><li>Strong experience in HVAC, plumbing, ventilation and testing &amp; commissioning.</li><li>Proven experience in Design &amp; Build projects.</li></ul>Pay: QAR0.01 - QAR1.00 per monthApplication Question(s):<ul><li>What is your current salary?</li><li>What is your notice period?</li><li>What is your expected salary?</li></ul>Work Location: In person

Site Inspector - Mechanical

Ralshypermarket

The Admin Assistant &ndash; Electromechanical will provide administrative and clerical support to the Electromechanical division, ensuring smooth day-to-day operations. The role involves handling documentation, coordinating with internal teams, managing records, and supporting project and maintenance activities.Key Responsibilities:<ul><li>Provide administrative support to the Electromechanical department, including filing, documentation, and correspondence.</li><li>Prepare, review, and maintain reports, project records, and technical documents.</li><li>Assist in scheduling meetings, preparing minutes, and following up on action points.</li><li>Maintain and update databases, contracts, and vendor/contractor records.</li><li>Support procurement activities by preparing requests, quotations, and follow-ups.</li><li>Coordinate with engineers, technicians, and external vendors for project-related activities.</li><li>Handle office communication, including emails, phone calls, and inquiries.</li><li>Assist with timesheets, attendance, and manpower allocation records.</li><li>Ensure compliance with company policies and maintain confidentiality of sensitive information.</li><li>Perform other administrative duties as assigned by the line manager.</li></ul>Requirements:<ul><li>Proven experience as an Administrative Assistant, preferably in Electromechanical/Construction/Facilities field.</li><li>Strong organizational and multitasking skills.</li><li>Proficiency in MS Office (Word, Excel, PowerPoint, Outlook).</li><li>Good knowledge of document control practices.</li><li>Excellent written and verbal communication skills.</li><li>Ability to work independently and within a team.</li><li>Diploma / Bachelor&rsquo;s degree in Business Administration or related field.</li><li>Minimum 2 years of relevant experience.</li></ul>Pay: AED1,747.37 - AED5,747.62 per monthWork Location: In person

Admin Assistant – Electromechanical

TaaB Electro Mechanic L.L.C

Experience Draftsman Hiring PostCAREER OPPORTUNITY | IMMEDIATE HIRINGTAAB Electromechanical L.L.C is seeking to recruit a Senior Draftsman (Electrical / MEP) to join our growing team in Dubai, United Arab Emirates.Position: Senior Draftsman (Electrical / MEP)Requirement: Only experienced candidates are eligible to apply Must be highly skilled, smart, and active in execution of drafting works Strong command in MEP coordination drawings and technical detailing Ability to work efficiently under pressure and meet project deadlines Immediate joiners will be given priority consideration. Ideal Candidate Profile: We are looking for a professional who is technically strong, detail-oriented, and capable of delivering high-quality shop drawings and coordinated MEP solutions with minimal supervision.Location: Dubai, United Arab EmiratesApplication Process: Interested candidates are requested to submit their updated CV to:<ul><li>carrierstaab@gmail.com</li><li>abdulhr.taabmep@gmail.com</li></ul>HR Contact: Abdul Imran &ndash; 056 534 9883Only shortlisted candidates will be contacted.&mdash; Human Resources Department TAAB Electromechanical L.L.CWork Location: In personPay: From AED2,500.00 per monthExperience:<ul><li>AutoCAD: 1 year (Required)</li></ul>Language:<ul><li>English (Required)</li></ul>Work Location: In person

Experience MEP Draftsman

E2 Consulting Engineers, Inc.

<div>About the Organization:
<div>
E2 Consulting Engineers, LP (E2) is a professional services firm established in 1988 specializing in a full spectrum of engineering services including, project engineering and design, federal base operations and infrastructure support services, gas pipeline construction and inspection services, environmental consulting and remediation, and information technology services. At E2, we value safety, innovation and collaboration, and we are dedicated to excellence.</div>
Overview:

The Certified Welding Inspector (CWI) inspects and ensures that proper welding and radiographic procedures are qualified and utilized. In addition, the inspector will maintain appropriate documentation, including MTRs, detailed as-builts, and weld mapping. All activities must be performed per client specification and approved for construction drawings, API-1104, and industry standards.
Responsibilities:

The Welding Inspector works under the direction of the Chief Inspector, who will assign additional responsibilities to each inspector as needed. The duties assigned to the Welding Inspector will include, but are not limited to, the following:<ul><li>
Be familiar with the approved construction drawings and Company specifications.</li><li>
Understanding the Contract document as it relates to their duties on the project.</li><li>
Have a basic understanding of welding techniques, positions, consumables, weld preparation, drawing requirements, and maintain a detailed inspector's logbook.</li><li>
Completing and submitting relevant inspection reports that accurately describe the work performed on the project in a manner such that the welds inspected may subsequently be identified per current standards.</li><li>
Taking a proactive approach to safety on the job site and reporting safety issues to the Chief Inspector, Construction Manager, and Safety Inspector.</li><li>
Plan and organize inspection duties in advance.</li><li>
Assure any design changes or material substitutions are discussed with the Construction Manager, Chief Inspector, and proper Company approval is obtained.</li><li>
Verify all materials used in the installation comply with Company requirements.</li><li>
Keep the Chief Inspector aware of any problems, or anticipated friction points, with the project.</li><li>
Possess an understanding of the relationship between quality assurance, quality control, and inspection procedures.</li><li>
Verify a welding procedure is established and that each welder is qualified for the work they perform.</li><li>
Monitor the quality of the welds performed per the WPS and client specifications to ensure sound welds are completed.</li><li>
Assure the repairs made to correct defects in a pipe weld sufficiently corrected the defect, and the weld satisfies the requirements as outlined by the appropriate codes and operator specifications.</li><li>
Assure all welding materials are of proper type and quality, they have been stored according to manufacturers' specifications, and damaged materials are not used in the pipe welding.</li><li>
Weld Inspector may be assigned additional duties and responsibilities relating to pipeline construction inspection observation and documentation.</li><li>
Responsible for tracking all materials used for pipeline construction, including joint numbers, joint lengths, and heat numbers associated with all materials (pipe stock, fittings, etc.).</li><li>
Manage and reconcile complex project documentation to maintain complete material and weld traceability, including weld maps, heat numbers, weld numbers, material test reports (MTRs), radiographic testing (RT) reports, repair records, and associated inspection documentation; identify and resolve discrepancies before final turnover.</li><li>
Ensure compliance with all project-specific environmental requirements.</li><li>
Inform Chief Inspector immediately of any safety or construction deviations or any problems and anticipated problems.</li></ul>
Qualifications:
<div>
Requirements:</div><ul><li>
Position Requires Certified Welding Inspector (CWI) through the American Welding Society with documented and verifiable work experience related to transmission/process piping and API-1104.</li><li>
Position Requires a minimum of either the National Association of Corrosion Engineers (NACE) Coating Inspection Program (CIP) Level 1 Certification or Association for Materials Protection and Performance (AMPP) Basic Coatings Inspector Certification.</li><li>
Must be authorized to work in the U.S.</li><li>
Obtain Operator Qualification (OQ) status as required by the project.</li></ul>
 Other Skills/Abilities: 
<ul><li>
Must be able to communicate to other team members and client personnel clearly.</li><li>
Must be able to write clearly and concisely to prepare reports and correspondence.</li><li>
Skilled with M.S. Office suite.</li><li>
Strong attention to detail.</li><li>
Demonstrated ability to organize, cross-reference, and reconcile high-volume technical documentation with a high degree of accuracy.</li><li>
Ability to work in a team environment.</li></ul>
Benefits:
<div>
E2 Consulting Engineers, LP offers an excellent benefits package including health, dental, vision, and life insurance, 401(k) with employer match.</div>
Work Environment/Physical Demands:
<ul><li>Construction Sites and Client Right-of-Way (ROW).</li><li>
Client testing facility (occasionally).</li><li>
Corporate office (occasionally).</li><li>
It may require extensive driving to reach job sites and client/E2 offices.</li><li>
There are frequent ascending and descending ladders, stairs, scaffolding, ramps, poles, and the like, using feet and legs and hands and arms up in and out of pipeline bell-hole / trench / excavation.</li><li>
Maintaining body equilibrium to prevent falling and walking, standing, or crouching on narrow, slippery, or erratically moving surfaces.</li><li>
Lifting objects over 50 pounds from a lower to a higher position or moving objects horizontally from position to position.</li><li>
Possess the ability to perform visual inspection of construction crew quality of work, measuring devices, and assemble fabrication parts at distances close to the eyes.</li><li>
Able to perform in both inside and outside environmental conditions in all four seasons throughout the continental United States &ndash; extreme cold (temperatures below 32 degrees Fahrenheit) and extreme heat (temperatures above 100 degrees Fahrenheit) for more than one hour.</li><li>
Can work extended and overnight shifts without limitations.</li></ul>
Travel:
<div>
It may require extensive driving to reach job sites and client/E2 offices.</div>
Local Candidates only: No Drug Free Workplace:
<div>
E2 Consulting Engineers, LP is a Drug Free Workplace. After accepting an offer of employment, applicants may be required to undergo background checks, drug testing, and/or fit-for-duty physical examination. Drug screens will include, but not be limited to, Amphetamines, Cocaine Metabolites, Marijuana Metabolites (THC), Opiates, and Phencyclidine (PCP). As a federal contractor, E2 cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician.</div>
Solicitation:
<div>
Please no solicitation of any kind from agencies, staffing, or recruiting firms.</div>
EEO Statement:
<div>
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.</div></div>

Welding Inspector

<div>
 
 E2 Consulting Engineers, LP (E2)
 
 is a professional services firm established in 1988 specializing in a full spectrum of engineering services including, project engineering and design, federal base operations and infrastructure support services, gas pipeline construction and inspection services, environmental consulting and remediation, and information technology services. At E2, we value safety, innovation and collaboration, and we are dedicated to excellence.
 
 
 
 Overview
 
 
 
 The Certified Welding Inspector (CWI) inspects and ensures that proper welding and radiographic procedures are qualified and utilized. In addition, the inspector will maintain appropriate documentation, including MTRs, detailed as-builts, and weld mapping. All activities must be performed per client specification and approved for construction drawings, API-1104, and industry standards.
 
 
 
 Responsibilities
 
 
 
 The Welding Inspector works under the direction of the Chief Inspector, who will assign additional responsibilities to each inspector as needed. The duties assigned to the Welding Inspector will include, but are not limited to, the following:
 
 
 <ul>
 <li>
 Be familiar with the approved construction drawings and Company specifications.
 </li>
 <li>
 Understanding the Contract document as it relates to their duties on the project.
 </li>
 <li>
 Have a basic understanding of welding techniques, positions, consumables, weld preparation, drawing requirements, and maintain a detailed inspector's logbook.
 </li>
 <li>
 Completing and submitting relevant inspection reports that accurately describe the work performed on the project in a manner such that the welds inspected may subsequently be identified per current standards.
 </li>
 <li>
 Taking a proactive approach to safety on the job site and reporting safety issues to the Chief Inspector, Construction Manager, and Safety Inspector.
 </li>
 <li>
 Plan and organize inspection duties in advance.
 </li>
 <li>
 Assure any design changes or material substitutions are discussed with the Construction Manager, Chief Inspector, and proper Company approval is obtained.
 </li>
 <li>
 Verify all materials used in the installation comply with Company requirements.
 </li>
 <li>
 Keep the Chief Inspector aware of any problems, or anticipated friction points, with the project.
 </li>
 <li>
 Possess an understanding of the relationship between quality assurance, quality control, and inspection procedures.
 </li>
 <li>
 Verify a welding procedure is established and that each welder is qualified for the work they perform.
 </li>
 <li>
 Monitor the quality of the welds performed per the WPS and client specifications to ensure sound welds are completed.
 </li>
 <li>
 Assure the repairs made to correct defects in a pipe weld sufficiently corrected the defect, and the weld satisfies the requirements as outlined by the appropriate codes and operator specifications.
 </li>
 <li>
 Assure all welding materials are of proper type and quality, they have been stored according to manufacturers' specifications, and damaged materials are not used in the pipe welding.
 </li>
 <li>
 Weld Inspector may be assigned additional duties and responsibilities relating to pipeline construction inspection observation and documentation.
 </li>
 <li>
 Responsible for tracking all materials used for pipeline construction, including joint numbers, joint lengths, and heat numbers associated with all materials (pipe stock, fittings, etc.).
 </li>
 <li>
 Manage and reconcile complex project documentation to maintain complete material and weld traceability, including weld maps, heat numbers, weld numbers, material test reports (MTRs), radiographic testing (RT) reports, repair records, and associated inspection documentation; identify and resolve discrepancies before final turnover.
 </li>
 <li>
 Ensure compliance with all project-specific environmental requirements.
 </li>
 <li>
 Inform Chief Inspector immediately of any safety or construction deviations or any problems and anticipated problems.
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 Requirements:
 
 
 
 <ul>
 <li>
 Position Requires Certified Welding Inspector (CWI) through the American Welding Society with documented and verifiable work experience related to transmission/process piping and API-1104.
 </li>
 <li>
 Position Requires a minimum of either the National Association of Corrosion Engineers (NACE) Coating Inspection Program (CIP) Level 1 Certification or Association for Materials Protection and Performance (AMPP) Basic Coatings Inspector Certification.
 </li>
 <li>
 Must be authorized to work in the U.S.
 </li>
 <li>
 Obtain Operator Qualification (OQ) status as required by the project.
 
 
 </li>
 </ul>
 
 Other Skills/Abilities:
 
 
 
 <ul>
 <li>
 Must be able to communicate to other team members and client personnel clearly.
 </li>
 <li>
 Must be able to write clearly and concisely to prepare reports and correspondence.
 </li>
 <li>
 Skilled with M.S. Office suite.
 </li>
 <li>
 Strong attention to detail.
 </li>
 <li>
 Demonstrated ability to organize, cross-reference, and reconcile high-volume technical documentation with a high degree of accuracy.
 </li>
 <li>
 Ability to work in a team environment.
 
 
 </li>
 </ul>
 
 Benefits
 
 
 
 
 E2 Consulting Engineers, LP
 
 offers an excellent benefits package including health, dental, vision, and life insurance, 401(k) with employer match.
 
 
 
 Work Environment/Physical Demands
 
 
 
 <ul>
 <li>
 Construction Sites and Client Right-of-Way (ROW).
 </li>
 <li>
 Client testing facility (occasionally).
 </li>
 <li>
 Corporate office (occasionally).
 </li>
 <li>
 It may require extensive driving to reach job sites and client/E2 offices.
 </li>
 <li>
 There are frequent ascending and descending ladders, stairs, scaffolding, ramps, poles, and the like, using feet and legs and hands and arms up in and out of pipeline bell-hole / trench / excavation.
 </li>
 <li>
 Maintaining body equilibrium to prevent falling and walking, standing, or crouching on narrow, slippery, or erratically moving surfaces.
 </li>
 <li>
 Lifting objects over 50 pounds from a lower to a higher position or moving objects horizontally from position to position.
 </li>
 <li>
 Possess the ability to perform visual inspection of construction crew quality of work, measuring devices, and assemble fabrication parts at distances close to the eyes.
 </li>
 <li>
 Able to perform in both inside and outside environmental conditions in all four seasons throughout the continental United States &ndash; extreme cold (temperatures below 32 degrees Fahrenheit) and extreme heat (temperatures above 100 degrees Fahrenheit) for more than one hour.
 </li>
 <li>
 Can work extended and overnight shifts without limitations.
 
 
 </li>
 </ul>
 
 Travel
 
 
 
 It may require extensive driving to reach job sites and client/E2 offices.
 
 
 
 Local Candidates only
 
 
 
 No
 
 
 
 Drug Free Workplace
 
 
 
 E2 Consulting Engineers, LP is a Drug Free Workplace. After accepting an offer of employment, applicants may be required to undergo background checks, drug testing, and/or fit-for-duty physical examination. Drug screens will include, but not be limited to, Amphetamines, Cocaine Metabolites, Marijuana Metabolites (THC), Opiates, and Phencyclidine (PCP). As a federal contractor, E2 cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician.
 
 
 
 Solicitation
 
 
 
 Please no solicitation of any kind from agencies, staffing, or recruiting firms.
 
 
 
 EEO Statement
 
 
 
 All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
</div>

City of Whittier, CA

<div><div><div><h2 class="jobSectionHeader">Description</h2></div>
<div><div>POSITION WILL CLOSE AFTER RECEIPT OF THE FIRST 150 APPLICATIONS OR AUGUST 13, 2026 WHICHEVER OCCURS FIRST</div> 
Class specifications are only intended to present a descriptive summary of the range of duties and responsibilities associated with specified positions. Therefore, specifications may not include all duties performed by individuals within a classification. In addition, specifications are intended to outline the minimum qualifications necessary for entry into the class and do not necessarily convey the qualifications of incumbents within the position. 
 
DEFINITION: 
Under general supervision, learns to conduct and conducts field inspections and checks residential, commercial and industrial construction, alteration, or repair of buildings and other structures; enforces codes related to building, plumbing, electrical, mechanical, structural, and finish trade areas; performs plan review and provides building code information to the public; performs other related duties as required. 
 
DISTINGUISHING CHARACTERISTICS: 
 
Building Inspector I 
The Building Inspector I is the entry-level class in the Building Inspector series that allows the incumbent to develop journey level knowledge and abilities. Initially, under immediate supervision, incumbents perform the more routine and less complex assignments within an established procedural framework, where there are minimal consequences of error, including a wide variety of code, law, regulation, and ordinance enforcement. This classification is distinguished from the next higher level classification of Building Inspector II by the performance of inspections requiring a lesser degree of code interpretation and judgment. 
 
Building Inspector II 
The Building Inspector II is the journey level class in the Building Inspector series in which incumbents are expected to independently, as a combination inspector, perform the full scope of assigned building inspection duties. Incumbents are responsible for performing the full range of residential, commercial, and industrial inspections, including electrical, plumbing, mechanical, and structural code compliance. The work requires independence and discretion in working with the public and in conducting field inspections, and involves a proactive implementation of applicable building codes and regulations. This class is distinguished from the next higher classification of Senior Building Inspector/Plans Examiner in that the latter has the responsibility for coordinating the building inspections, lead direction, the more complex and sensitive duties and other functions. 
 
SUPERVISION RECEIVED/EXERCISED: 
 
Building Inspector I 
Receives immediate supervision from a Senior Building Inspector/Plans Examiner and technical and functional supervision from a Building Inspector II depending on assignment. Incumbents in this class do not routinely exercise supervision. 
 
Building Inspector II 
Receives general supervision from the Senior Building Inspector/Plan Examiner. May exercise functional and technical supervision over Building Inspector I.</div>
<div><h2 class="jobSectionHeader">Examples of Duties</h2></div>
<div>ESSENTIAL FUNCTIONS: (include but are not limited to the following) 
 
Learns to perform and performs the full array of residential, commercial, and industrial building construction, remodel, and repair field inspections to ensure the health, safety, and welfare of the public; determines existence and type of various building code violations; compiles, analyzes, and evaluates findings of investigations and inspections; interacts with architects and construction contractors to ensure code compliance; performs follow-up inspections as required; ensures compliance with all applicable municipal building related codes and regulations; issues standard construction and occupancy permits and approves final inspection certificates. 
 
Conducts periodic residential and commercial field inspections before and during construction, remodeling or repair; ensures compliance with building and related codes and regulations; checks the safety of construction and installation practices; inspects the quality of materials and methods of construction for footings and foundations, excavations, wood framing, concrete work, steel erection, lathing, plastering, tile work, pools and spas, masonry, electrical, plumbing, and other construction work; makes final inspections to clear permits. 
 
Interprets, applies, and explains applicable Federal, State, and municipal electrical, plumbing, structural, and mechanical codes, and other related laws, codes, and regulations to the public, departmental staff, and other agencies; advises architects, contractors, and property owners on the requirements for compliance; explains processes and procedures for obtaining compliance or appropriate permits. 
 
Maintains clear, concise, and comprehensive records and reports related to inspection activities; maintains daily log of contacts or inspections for code enforcement cases; enters and retrieves information from records systems. 
 
Assists in the checking of building plans and specifications for residential, and non-residential structures for compliance with applicable Building, Electrical, Plumbing, Occupancy, and Zoning Codes; checks for grade and quality of materials used in construction; assists in and coordinates plan review with other City departments or divisions and outside agencies. 
 
Abates homes and businesses and issues stop work orders and correction notices. 
 
Responds to questions and concerns from the public, departmental staff, and other agencies; provides information as appropriate and resolves plans and building code issues and complaints; cooperates with other agencies. 
 
Prepares a variety of reports and correspondence, including notices of violations and follow-up letters; attends various meetings and training seminars; keeps informed of changes and new legislation pertaining to building codes and related regulations; responds to emergency situations as required. 
 
Establishes positive working relationships with representatives of community organizations, State/local agencies, City management and staff, and the public. 
 
OTHER DUTIES: (include but are not limited to the following) 
 
Assists at the front counter; answers questions regarding building permitting, code requirements, or related building compliance. 
 
May be exposed to confidential and privileged information during the course of duties, which should be maintained as such.
 
 
Performs other related duties as required. 
 
PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS: 
Position requires sitting, standing, walking on level and slippery surfaces, reaching, twisting, turning, kneeling, bending, stooping, squatting, crouching, grasping, and making repetitive hand movement in the performance of daily duties. The position also requires both near and far vision when inspecting work and operating assigned equipment. The need to lift, carry, and push tools, equipment, and supplies weighing 25 pounds or more is also required. Additionally, the incumbent in this outdoor position works in all weather conditions, including wet, hot, and cold. The position entails working in situations that may expose the employee to fumes or airborne particles, electrical shock or mechanical hazards. The nature of the work also requires the incumbent to climb ladders, drive motorized vehicles, operate in heavy vehicle traffic conditions, and often work with constant interruptions. 
 
Some of these requirements may be accommodated for otherwise qualified individuals requiring and requesting such accommodations.</div>
<div><h2 class="jobSectionHeader">Typical Qualifications</h2></div>
<div>QUALIFICATIONS: (The following are minimal qualifications necessary for entry into the classification.) 
 
Education and/or Experience: 
Any combination of education and experience that has provided the knowledge, skills, and abilities necessary for a Building Inspector I/II. A typical way of obtaining the required qualifications is to possess the equivalent of: 
 
Building Inspector I 
Three years of experience in one or more of the general building trades, construction or a related field, and a high school diploma or equivalent. 
 
Building Inspector II 
In addition to the above, two years of experience as a building inspector with a public agency or equivalent to that of a Building Inspector I in the City of Whittier. 
 
License/Certificate: 
Possession of a valid California Class C driver's license and a safe driving record. Possession of an I.C.C. Building Inspection certificate within six months of appointment is required. 
 
KNOWLEDGE/ABILITIES/SKILLS: (The following are a representative sample of the KAS's necessary to perform essential duties of the position.)
 
 
Knowledge of: 
Principles, practices, and methods used in various building construction areas, including plumbing, electrical, and mechanical; operational characteristics and use of standard equipment used in building inspection and the building trades; building and construction standards and materials; construction materials and testing procedures; basic principles of mathematics; applicable Federal, State, and local laws, codes, and regulations, including construction code manuals and specifications; standard office procedures, practices, and equipment; modern office equipment, including a computer and applicable software; methods and techniques for record keeping and report preparation and writing; proper English, spelling, and grammar; and occupational hazards and standard safety procedures. 
 
Ability to: 
Apply policies, procedures, codes, and regulations pertaining to building inspection; plan and prioritize daily inspections; read, interpret, and explain maps, sketches, plans, drawings, specifications, and technical manuals; maintain I.C.C. certification through continuing education programs; keep accurate records; learn more complex principles, practices, techniques, and regulations pertaining to assigned duties; implement, explain, and apply applicable laws, codes and regulations; read, interpret, and record data accurately; perform mathematical calculations quickly and accurately; organize, prioritize, and follow up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; respond to issues and concerns from contractors, homeowners, and the community; analyze a complex issue, and develop and implement an appropriate response; follow written and oral directions; observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; and establish and maintain effective working relationships. 
 
Skill to: 
Operate an office computer and variety of word processing and software applications; and safely and effectively operate a variety of tools and equipment used in building inspection.</div>
<div><h2 class="jobSectionHeader">Supplemental Information</h2></div>
<div>Medical: 
Applicants will be required as a prerequisite to employment to successfully pass a 
physical examination, including a drug screen, the cost of which will be paid by the City. 
 
Selection/Exam Process: The person selected will be expected to perform all the functions of the position. Based on a review of the applications and the supplemental applications received, the candidates appearing to be the most qualified and meeting the City's particular needs will be invited in writing to the exam process. A candidate must achieve a passing score on each exam to proceed to the next exam. 
 
Exam Information: (Dates to be determined.) 
Panel Oral Interview: 100%<div> 
The provisions of this announcement do not constitute an expressed or implied contract and any provisions contained in this announcement may be modified or revoked without notice.</div><div> 
The City of Whittier is an Equal Opportunity Employer</div></div></div></div>

Building Inspector I/II

TRAK TECOM

<div>
 
 TRAK TECOM designs, builds, and delivers advanced RF electronic solutions and antenna systems for mission-critical performance across the aerospace and defense industry.
 
 
 
 
 
 
 Our RF microwave and antenna solutions support Electronic Warfare (EW), Intelligence, Surveillance, and Reconnaissance (ISR), Radar, Positioning, Navigation, and Timing (PNT), Telemetry, Tracking, Command &amp; Datalink, and Communications helping customers achieve reliability, resilience, and high performance in the harshest operating environments
 
 
 
 
 
 .
 
 The Mechanical Designer supports the development, documentation, and integration of high-reliability electronic and electromechanical products used in military, aerospace, and RF/microwave applications. This position focuses on electronic packaging design, 3D modeling, engineering documentation, and mechanical problem solving associated with RF assemblies, antennas, control devices, and related systems. The role requires a highly proficient SOLIDWORKS&reg; user with a strong disposition toward design, creativity, and independently solving mechanical packaging and integration challenges while working closely with cross-functional engineering and manufacturing teams throughout the product lifecycle
 
 . U.S. citizenship required. U.S. citizenship is required to obtain a government security clearanc
 
 
 
 
 
 
 
 e.
 
 Responsibilitie
 
 
 <ul>
 <li>
 s: Create detailed 3D solid models, fabrication drawings, assembly drawings, and related engineering documentation using SOLIDWORKS&reg; and Solidworks&reg; PD
 </li>
 <li>
 M .Develop mechanical packaging solutions for RF/microwave assemblies, antennas, control devices, and related electromechanical produc
 </li>
 <li>
 ts.Design and document assemblies involving machined parts, additive manufacturing features, sheet metal components, connectors, PCBs, cables, motors, gears, bearings, and related hardwa
 </li>
 <li>
 re.Independently solve mechanical layout, packaging, tolerance, and integration challenges with limited supervisi
 </li>
 <li>
 on.Support product development from concept through prototype, production release, and sustaining engineering activiti
 </li>
 <li>
 es.Create and maintain parts, BOMs, drawings, and engineering documentation within PLM and Solidworks&reg; PDM document/data control syste
 </li>
 <li>
 ms.Generate and process Engineering Change Orders/Notices (ECOs/ECN
 </li>
 <li>
 s).Apply ASME Y14.5 drafting standards, GD&amp;T, Design for Manufacturability (DFM), and Design to Cost (DTC) principl
 </li>
 <li>
 es.Coordinate with Mechanical, Electrical, Manufacturing, PCB, Test, Quality, and Procurement personnel to support product integration and resolve technical issu
 </li>
 <li>
 es.Participate in design reviews, prototype builds, troubleshooting, and production support activiti
 </li>
 <li>
 es.Support legacy documentation updates using AutoCAD&reg; as requir
 </li>
 <li>
 ed.Communicate technical information effectively both verbally and in writi
 </li>
 <li>
 ng.Other related duties as assign
 </li>
 </ul>
 
 
 
 
 
 ed.
 
 Technical Knowledge, Skills and Abilit
 
 
 <ul>
 <li>
 ies:Proficiency using SOLIDWORKS&reg; is requi
 </li>
 <li>
 red.Functional proficiency using Solidworks&reg; PDM is requi
 </li>
 <li>
 red.Strong understanding of mechanical design fundamentals including tolerancing, materials, fasteners, thermal considerations, and structural integr
 </li>
 <li>
 ity.Strong understanding of ASME Y14.5 drafting standards and Geometric Dimensioning &amp; Tolerancing (GD&amp;
 </li>
 <li>
 ;T).Understanding of electromechanical components including connectors, PCBs, cables, motors, gears, and beari
 </li>
 <li>
 ngs.Familiarity with manufacturing processes such as machining, additive manufacturing, sheet metal fabrication, welding, and mechanical assembly techniq
 </li>
 <li>
 ues.Familiarity with PLM systems and configuration-controlled documentation practi
 </li>
 <li>
 ces.Strong mechanical aptitude, deductive reasoning, troubleshooting, and problem-solving abilit
 </li>
 <li>
 ies.Ability to independently develop practical mechanical packaging and integration soluti
 </li>
 <li>
 ons.Effective verbal, written, organizational, and multi-tasking ski
 </li>
 <li>
 lls.Ability to work effectively within cross-functional engineering and manufacturing te
 </li>
 <li>
 ams.Working knowledge of AutoCAD&reg; is prefer
 </li>
 </ul>
 
 
 
 
 
 red.
 
 Experi
 
 
 <ul>
 <li>
 ence:Minimum of three (3) years of applicable mechanical design experience is prefe
 </li>
 <li>
 rred.Experience in military, aerospace, or high-reliability electronics industry is a
 </li>
 </ul>
 
 
 
 
 
 plus.
 
 Educa
 
 tion: Associate degree in Arts/Science (A.A./A.S.), technical/trade school, or military training is preferred. Equivalent applicable experience will be consi
 
 
 
 
 
 
 dered.
 
 Se
 
 curity: U.S. citizenship required. U.S. citizenship is required to obtain a government security cle
 
 
 
 
 arance.
</div>

Mechanical Designer

Search 146+ Electromechanical inspector jobs near you this August. New roles added regularly across leading industries. Apply today.

146 electromechanical inspector jobs Near Me

Site Inspector - Mechanical

Admin Assistant – Electromechanical

Experience MEP Draftsman

Welding Inspector

Welding Inspector

Building Inspector I/II

Mechanical Designer