electronics engineer pcb design engineer needed for gerber file development

AL MUTAWA & SAHNI Co.

We are looking for an experienced Electronics Engineer / PCB Design Engineer to help us design and prepare Gerber files for PCB development.The ideal candidate should have strong experience in designing printed circuit boards, creating schematics, selecting electronic components, and preparing complete manufacturing-ready PCB files. This role is suitable for someone who can take a concept or prototype and turn it into a professional PCB design ready for fabrication.ResponsibilitiesThe selected engineer will be responsible for:<ul><li>Designing PCB layouts based on our project requirements</li><li>Creating circuit schematics</li><li>Preparing complete Gerber files for PCB manufacturing</li><li>Reviewing and improving existing electronic designs</li><li>Advising on component selection</li><li>Ensuring the PCB design is compact, reliable, and production-ready</li><li>Coordinating with PCB manufacturers if needed</li><li>Providing BOM, schematic files, Gerber files, and assembly files</li></ul>Required SkillsThe candidate should have experience with:<ul><li>PCB design and development</li><li>Gerber file generation</li><li>Circuit schematic design</li><li>KiCad, Altium Designer, Eagle, EasyEDA, or similar software</li><li>Component selection and BOM preparation</li><li>Microcontrollers, sensors, LEDs, motors, batteries, and charging circuits</li><li>Low-power electronics design</li><li>Testing and troubleshooting PCB designs</li></ul>Preferred ExperienceExperience with wearable devices, Arduino-based circuits, Bluetooth-enabled devices, battery-powered products, or sensor-based electronics will be a strong advantage.Project GoalWe are developing a compact electronic product and need a qualified engineer who can help convert the current design into proper PCB files for manufacturing.RequirementsApplicants should be able to provide:<ul><li>Previous PCB design samples or portfolio</li><li>Examples of Gerber files created for past projects</li><li>Estimated timeline for completing the design</li><li>Clear communication during the project</li><li>Ability to make revisions after review</li></ul>Work Location: In person

Electronics Engineer / PCB Design Engineer Needed for Gerber File Development

OSC Edge

<div>
 
 The Power Generation &amp; Infrastructure Engineer (PG&amp;I) will be a skilled, efficient, and licensed Electrical/HVAC contractor. The engineer will be detail oriented with practical experience in HVAC systems and sub-systems. The engineer will be adept and performing adjustments and calibrations on electronic and electrical control systems. Experience troubleshooting and resolving electrical equipment problems is a must. Must have experience, with the knowledge and skills, to maintain and repair commercial and tactical generators and subsystems, to include mechanical, electrical, hydraulic, and pneumatic operating systems.
 
 
 
 
 
 This role requires on-site 5 days a week in Kuwait.
 
 
 
 
 
 
 Responsibilities:
 
 
 <ul>
 <li>
 Develop and design power generation facilities (e.g., gas engines, solar arrays, fuel cells) and electrical distribution infrastructure.
 </li>
 <li>
 Manage engineering activities from conceptual design through to construction, testing, and final commissioning.
 </li>
 <li>
 Collaborate with utility providers to negotiate grid interconnections and ensure compliance with local and military regulations and requirements.
 </li>
 <li>
 Create predictive maintenance programs and troubleshoot plant or infrastructure failures to minimize downtime.
 </li>
 <li>
 Conduct load forecasting, thermodynamic analysis, and energy modeling to maximize efficiency and control operational costs.
 </li>
 <li>
 Ensure all infrastructure designs meet strict industry, environmental, and governmental regulatory standards.
 </li>
 <li>
 Resolve complex energy and controls management issues, using diagnostic tools and measurements.
 </li>
 <li>
 Operating, controlling, and monitoring energy management systems, air handling units, pumps, compressed air systems and vacuum systems using information technology-based facilities. M
 </li>
 <li>
 Adhering to code specification for equipment tests and repair while deciphering schematic diagrams and blueprints.
 </li>
 <li>
 Operate and repair large tonnage equipment, Generators, and chill water systems.
 </li>
 </ul>
 
 
 
 
 
 Requirements:
 
 
 <ul>
 <li>
 10+ years&rsquo; experience with electrical and HVAC systems
 </li>
 <li>
 Must have Top Secret personnel clearance and must be eligible for a TS/SCI.
 </li>
 <li>
 Install, repair, and maintain generators (3kw to 100kw 50,60 and 400HZ)
 </li>
 <li>
 Maintenance and repair of mobile and fixed communications ECUs.
 </li>
 <li>
 Installation and service of HVAC/Electrical commercial, industrial and residential heating and air-condition systems, energy management and controls wiring, light commercial and residential wiring, high and low voltage, upgrading services single and 3-phase.
 </li>
 <li>
 Hands on troubleshooting and repair of commercial and industrial HVAC systems.
 </li>
 <li>
 Capable of performing ad-hoc requests for complicated QA or Design services with some explanation and oversight.
 </li>
 <li>
 Pneumatic Controls experience
 </li>
 <li>
 Digital Air Volume experience, preferred.
 </li>
 </ul>
 
 
 
 
 
 Preferred:
 
 
 <ul>
 <li>
 State Contractors License
 </li>
 <li>
 HVAC State Contractors License - Electrical
 </li>
 <li>
 ServSafe Certification
 </li>
 <li>
 National HVAC Certification by NCCER
 </li>
 <li>
 Refrigerant Transition and Recovery Certification
 </li>
 <li>
 National Electrical Code Certification
 </li>
 <li>
 Master Electricians Certification
 </li>
 </ul>
 
 
 
 
 #LI-DNI
 
</div>

Power Generation and Infrastructure Engineer

GE Vernova

<div><div><div>Component design and development Engineering organization team from GE gas power Engineering division, India is seeking a field Test Engineer to support all the regional customer field tests based at GE Kuwait Technology Center. The primary responsibility of this role is to support field testing in ME region GE Vernova customer base to cover instrumentation scope and test data collection. Also conducting material analysis as per the lab test processes and protocols and generating reports.
 
 
Our regional team supports the operation and maintenance of Gas Turbines, Steam Turbines, Generators as well as their Controls, and Accessory systems. The Power Services Engineering team members are focal points for problem resolution for our customers.
<h1 class="jobSectionHeader">Job Description</h1>
Key Responsibilities
<ul><li>Responsible for execution of regional field tests and laboratory test support.</li>
<li>Responsible for executing field test at customer site by placing instrumentation, cable routing, data acquisition equipment interfacing, software operation and preparing traceable documentation to collect quality test data as per procedures.</li>
<li>Be a point of contact for the test procedure development of field samples, as per the regional/business needs and update processes as per international procedures.</li>
<li>Responsible for design and construction of lab test facilities, test rigs, instrumentation systems and operation of relevant test software.</li>
<li>Upgrade knowledge as needed time to time and come up with ideas of simplification</li>
<li>Perform periodic Calibrations and maintain the test equipment as per ISO procedures</li>
<li>Report the test results and daily site activities promptly to associated stakeholders</li>
<li>Work safely by adhering to all safety EHS guidelines and help in audits, maintain logs and close the open issues.</li>
</ul>Required Qualifications:
<ul><li>Bachelors in engineering degree specifically Mechanical, Chemical, Electrical, Manufacturing, Material, Instrumentation or/and Aero space engineering or relevant field.</li>
<li>Minimum 2 years of experience in field or/ and lab testing, handling instrumentation or / and testing procedures.</li>
<li>Ability and willingness to travel up to 50% of the time to customer sites in GCC &amp; globally.</li>
<li>Good presentation and communication skills in Arabic &amp; English</li>
<li>Experience on MS office</li>
</ul>Desired Characteristics
<ul><li>Master's degree in mechanical /Instrumentation engineering.</li>
<li>Experience in handling laboratory analytical and data acquisition equipment</li>
<li>Awareness or/ and use of AI tools.</li>
<li>Eagerness to learn new technology, software tools &amp; other relevant domains</li>
<li>Awareness of different type of sensors, working principles, usage scenarios.</li>
<li>Knowledge and/or experience in chemical safety and SDS procedures for different chemicals/processes. Handling of inert gases and safety procedures for regulated operations.</li>
<li>Knowledge of lab quality certification and documentation</li>
<li>Working knowledge of test software such as Labview or any coding language such as C/C++ or python.</li>
<li>Knowledge of 5S &amp; active AI engagement is a strong asset.</li>
<li>Strong oral and written communication skills. Ability to document, plan, market, and execute programs.</li>
</ul><h1 class="jobSectionHeader">Additional Information</h1>
<div><div><div><div><div><div><div>Relocation Assistance Provided: Yes</div></div></div></div></div></div></div></div></div></div>

Engineer - Field Testing

Alyasra Fashion

<div>
 
 We are seeking a highly skilled &ldquo;
 
 Azure Cloud Solution Architect
 
 &rdquo; with domain experience in Retail-Fashion, Food &amp; Beverage, and Supply Chain.
 
 
 
 
 
 
 Key Responsibilities
 
 
 <ul>
 <li>
 Architect Azure-based solutions to support retail PoS systems, e-commerce platforms, ERP/SCM systems, and F&amp;B applications.
 </li>
 <li>
 Design scalable infrastructure for high-availability order processing, real-time stock visibility, and warehouse automation.
 </li>
 <li>
 Enable integration between Azure and retail platforms (e.g., Dynamics 365, Oracle Retail, Shopify, etc.).
 </li>
 <li>
 Implement data pipelines and analytics solutions using Azure Synapse, Data Factory, and Power BI for sales forecasting and supply-demand analytics.
 </li>
 <li>
 Manage migration of existing landscape from on-Prem to Azure Cloud, AWS to Azure etc
 </li>
 <li>
 Build secure APIs and event-driven architectures for mobile apps, loyalty systems, and delivery platforms.
 </li>
 <li>
 Lead the migration of legacy on-prem systems to Azure, applying cost optimization, hybrid cloud, and compliance strategies.
 </li>
 <li>
 Design disaster recovery (DR) and business continuity plans for retail and F&amp;B operations.
 </li>
 </ul>
 
 
 
 
 
 Technical Skills Required
 
 
 <ul>
 <li>
 Strong knowledge of Azure services:
 </li>
 <li>
 Compute: Azure App Services, AKS, Azure Functions
 </li>
 <li>
 Integration: API Management, Logic Apps, Event Grid, Storage: Blob, SQL, Cosmos DB
 </li>
 <li>
 Identity: Azure AD, RBAC, Conditional Access
 </li>
 <li>
 Monitoring: Azure Monitor, Application Insights
 </li>
 <li>
 Proficient in Infrastructure as Code (ARM, Bicep, Terraform).
 </li>
 <li>
 Experience with CI/CD pipelines using Azure DevOps and GitHub.
 </li>
 <li>
 Hands-on with containerization (Docker, Kubernetes) and DevSecOps.
 </li>
 <li>
 Experience in building secure, PCI-DSS compliant cloud solutions.
 </li>
 <li>
 Scripting experience: PowerShell, Bash, or Python.
 </li>
 <li>
 Strong knowledge of Azure services: Azure AD, Virtual Networks, Key Vault, App Services, AKS, Functions, Blob Storage, SQL/NoSQL DBs, etc.
 </li>
 <li>
 Understanding of hybrid cloud, networking, security, identity, and governance in Azure.
 </li>
 <li>
 Excellent communication and stakeholder management skills.
 </li>
 </ul>
 
 
 
 
 
 Preferred Certifications
 
 
 <ul>
 <li>
 Microsoft Certified: Azure Administrator Associate (AZ-104) (Preferred)
 </li>
 <li>
 Microsoft Certified: Dynamics 365 / Commerce (Preferred)
 </li>
 <li>
 Microsoft Certified: Azure Solutions Architect Expert (AZ-305) (Added Advantage)
 </li>
 <li>
 Microsoft Certified: Azure Security Engineer (AZ-500)(Added Advantage)
 </li>
 <li>
 TOGAF / ITIL Foundation (Added Advantage)
 </li>
 </ul>
 
 
 
</div>

Azure Cloud Solution Architect

Worley

<div>About us
Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.
Primary Objective
<ul><li>Ensure process design integrity while leading the process engineering group on specific projects.
</li><li>Responsible for the progress and quality of assigned tasks within the process area, including the supervision of engineers and design teams.
</li><li>To ensure all work carried out conforms with agreed codes and practices, meets all requirements of the contracts specification and ensure all work is carried out within agreed schedules, budgets and procedures.
</li></ul>What You Will Do
<ul><li>Ensure work is carried out competently and effectively, within time and budget constraints, and that project objectives are met.
</li><li>Provide overall supervision of prcoess engineers, designers, and technical personnel during project execution.
</li><li>Ensure the integrity of the work scope and that all work is carried out in accordance with applicable codes and standards.
</li><li>Manage project discipline resource requirements.
</li><li>Design Estimates and production and checking of design documents and drawings.
</li><li>Prepare process discipline cost, schedule, and resource estimates for assigned projects.
</li><li>Management, technical execution and completion of engineering assigned tasks.
</li><li>Assisting the project engineers in the co-ordination and preparation of input into the contract documents for the discipline area, including design criteria, scope of work, procedures and design approach.
</li></ul>What You Will Bring
<ul><li>Production and approval of PFDs, EFDs, MSDs, Cause and Effect Diagrams, Data Sheets, calculations and system modelling and simulation.
</li><li>Working to and using the company management systems.
</li><li>Ensuring compliance to company, client, local and international standards as given in the project PEP etc.
</li><li>Quality Assurance &ndash; Responsible for working within the provisions and guidelines of the Quality Assurance system relevant to the BU, etc.
</li><li>Safety &ndash; Responsible for personal safety safe working practices for the BU, etc. Understand and follow OH&amp;S procedures.
</li><li>Experience working in a PMC (Project Management Consultancy) environment.
</li><li>Demonstrated experience working in the Middle East project environment.
</li></ul>Qualifications / Experience
<ul><li>Full-time Bachelor&rsquo;s Degree in Chemical Engineering from an accredited university
</li><li>Minimum 15 years of total experience post graduate studies
</li><li>Minimum 10 years of experience in the oil &amp; gas, refinery, or petrochemical industry
</li><li>Minimum 5 years of experience as a Lead Design Engineer or equivalent
</li><li>Previous experience working with a contractor or in a comparable delivery model 
 
</li></ul>Why This Role Matters
<ul><li>You will play a key role in delivering safe, sustainable projects by leading a high-performing team and ensuring engineering excellence across all phases of the project.
</li><li>Your regional experience and PMC background will be critical in navigating project complexity and delivering value to our clients.
</li></ul>Moving forward together
We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.
And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.
<div>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</div></div>

Principal Process Engineer (Lead Design Engineer I - Process)

<div>
 
 Building on our past. Ready for the future
 
 
 
 Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We&rsquo;re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.
 
 
 
 Primary Objective
 
 
 
 To coordinate implementation of the KOC PMC Safety policies, HSE Management System and Project specific HSE. Management Plans as they apply to the project. Ensure that the site complies with the relevant HSE Legislation and KOC HSE requirements. Develop and implement the project HSE MS. Develop and maintain Statistical data for the Project. Prepare reports as required for the WorleyParsons KOC PMC HSEQ Manager. Position Reports to: HSE / QA / QC Manager.
 
 
 
 Specific Accountabilities
 
 
 
 <ul>
 <li>
 Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment.
 </li>
 <li>
 Ensure the EPC contractors develop implement and maintain a specific project Risk Management Plan.
 </li>
 <li>
 Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations.
 </li>
 <li>
 Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements.
 </li>
 <li>
 Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action.
 </li>
 <li>
 Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/ additions to requirements as they come into effect.
 </li>
 <li>
 Review EPC contractor Safety Management System and advise of required changes. Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractor to foster the professional image of WorleyParsons.
 </li>
 <li>
 Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken.
 </li>
 <li>
 Other key activities shall include but not be limited to the following:
 </li>
 <li>
 Pro-actively visit site and with the EPC contractor implement safety measures- promote/ensure safe work practices.
 </li>
 <li>
 Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings.
 </li>
 <li>
 Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained.
 </li>
 <li>
 Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmers.
 </li>
 <li>
 Maintain a HS&amp;E audit and assessment program for the location.
 </li>
 <li>
 Carry out regular inspections of the work areas with the respective EPC contractor line manager and or HSE representative and prepare reports.
 </li>
 <li>
 Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc.
 </li>
 <li>
 Assist EPC contractor line management and or construction supervisors in accident investigation process and report accordingly.
 </li>
 <li>
 Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives.
 </li>
 <li>
 Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors
 </li>
 <li>
 Monitor the availability and use of safety apparel and equipment.
 </li>
 <li>
 Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training,
 </li>
 <li>
 Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls
 </li>
 <li>
 Ensure all lines of communication on HSE-matters remain open and effective between all parties particularly KOC, WorleyParsons, EPC contractors and their subcontractors.
 
 
 </li>
 </ul>
 
 Qualification
 
 
 
 <ul>
 <li>
 Bachelor's degree in engineering (Mechanical, Chemical, Petroleum, Fire &amp; Safety, Environment, Production, Industrial, Electrical, Instrumentation or Civil.)
 </li>
 <li>
 Minimum years total post-graduation experience.
 </li>
 <li>
 Minimum years Oil &amp; Gas post-graduation experience.
 </li>
 <li>
 Minimum years' experience in a Safety /HSE Engineer.
 </li>
 <li>
 Practical experience with HSE management systems, reporting and audit procedures.
 </li>
 <li>
 Ability to develop, update and maintain in &ndash; house procedures.
 </li>
 <li>
 Must be conversant with local &amp; international safety standards and norms.
 </li>
 <li>
 Practical experience of design, construction, commissioning and maintenance aspects of oil &amp; gas installations.
 
 
 </li>
 </ul>
 
 Moving forward together
 
 
 
 We&rsquo;re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.
 
 
 We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.
 
 
 And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.
 
 
 Whatever your ambition, there&rsquo;s a path for you here. And there&rsquo;s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.
 
 
</div>

Safety Engineer (HSE Specialist II)

<div>
 
 Building on our past. Ready for the future
 
 
 
 Worley is a global professional services company of energy, chemicals and resources experts.
 
 
 We partner with our customers to deliver projects and create value over the life of their assets. We&rsquo;re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.
 
 
 
 Position Summary
 
 
 
 Responsible for independently applying advanced scheduling and planning techniques and analysis within a project environment.
 
 
 
 Primary Objective
 
 
 
 <ul>
 <li>
 To proactively support the Project by managing the planning process and planning personnel and their activities across the organisation
 </li>
 <li>
 To assist and support the Project Services Manager in managing the Project Schedule and ensure the client gains maximum business benefits from that mechanism
 </li>
 <li>
 Provide planning expertise and assist the project with their project planning activities
 
 
 </li>
 </ul>
 
 Specific Accountabilities
 
 
 
 <ul>
 <li>
 Supervise the planning function during design and/or construction stages of assigned project/projects.
 </li>
 <li>
 Effective maintenance of Performance through HS&amp;E program
 </li>
 <li>
 Achieve safety standards
 </li>
 <li>
 Responsible for assessing effectiveness of working practices and systems with a view to continuously improving systems, personal and team performance
 </li>
 <li>
 Carry out work in accordance with Health, Safety, Environmental and Quality systems
 </li>
 <li>
 To manage the Planning Team to deliver a complete Planning/Scheduling service to the Organization
 </li>
 <li>
 Work directly with the clients UEV Cost &amp; Planning to ensure the Planning processes, procedures and systems are implemented and subject to continuous improvement reviews.
 </li>
 <li>
 Prepare weekly /monthly reports as required, and analyse contractors reports
 </li>
 <li>
 Manage the appropriate activities and process to ensure the preparation of Assets and that Shutdown plans are carried out in a consistent and accurate manner
 </li>
 <li>
 Schedule all HSE issues relevant HSE plan activities
 </li>
 <li>
 Liaise with the Management Team on all relevant cost and planning issue
 </li>
 <li>
 Prepare regular status reports and forecasts for project management and client review.
 </li>
 <li>
 Supervise and develop other planning and specialist support staff at home and/or field office locations.
 </li>
 <li>
 Establish and maintain activity level integration between P3 and Project Management Reporting tool.
 </li>
 <li>
 Maintain the current and baseline schedule, analyse the effect of proposed changes and maintain the baseline change control authorisation process
 </li>
 <li>
 Quality Assurance &ndash; Responsible for working within the provisions and guidelines of the Quality Assurance system relevant to the Oil &amp; Gas Business Unit.
 </li>
 <li>
 Safety &ndash; Responsible for personal safety safe working practices for the Oil &amp; Gas Business Unit. Understand and follow OH&amp;S procedures.
 
 
 </li>
 </ul>
 
 Requirements
 
 
 
 <ul>
 <li>
 Must have an Engineering Degree
 </li>
 <li>
 Must have minimum 8 years post graduation total experience
 </li>
 <li>
 Must have minimum 5 years experience in same role(Project Control Engineer)
 </li>
 <li>
 Must have a proven track record of scheduling, monitoring and reporting of various stages of project in a multi project(s) environment and with demonstrable skills in Primavera.
 </li>
 <li>
 Must be able to highlight the Critical path to the line Manager and proactive to ensure completion of the project as scheduled.
 
 
 </li>
 </ul>
 
 Moving forward together
 
 
 
 We&rsquo;re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.
 
 
 We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.
 
 
 And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.
 
 
 Whatever your ambition, there&rsquo;s a path for you here. And there&rsquo;s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.
</div>

Planning Engineer

Explore 113+ Electronics engineer pcb design engineer needed for gerber file development in Farwaniya this June. Find roles across top companies and apply now to boost your career.