equipment engineer

Tesla

<div>What to Expect<div>
We are building Terafab, a vertically integrated semiconductor factory at an unprecedented scale. The facility houses logic, memory, packaging, test, and lithography mask production under one roof, optimized for rapid iteration and maximum compute density per square foot. In this critical role, you will be responsible for the installation, qualification, optimization, reconfiguration and maintenance of state-of-the-art Chemical Mechanical Planarization (CMP) tools. Your work will directly impact the yield and performance of Tesla's custom semiconductor chips, which are essential for our AI, Autopilot, and powertrain systems. You will bridge the gap between equipment hardware and process requirements to achieve the extreme throughput and uniformity targets of the Terafab facility. This is a highly hands-on role at one of the most ambitious fab programs in the world.</div> 
What You'll Do<div><ul><li>
Lead the installation, calibration, and acceptance testing (IQ/OQ/PQ) of new and upgraded CMP tools (e.g., Applied Materials, Ebara, AMAT)</li><li>
Develop and execute equipment qualification plans to ensure tools meet Terafab&rsquo;s rigorous specifications for planarity, defectivity, and throughput</li><li>
Collaborate with tool vendors to resolve technical challenges during ramp-up</li><li>
Lead root cause analysis (RCA) for equipment failures, utilizing methodologies such as 8D or Fishbone diagrams</li></ul>
Partner closely with Process Integration, Metrology, and Yield Engineering teams to align equipment capabilities with process windows 
Support the development of new CMP recipes for advanced node technologies (e.g., 4nm, 3nm, or custom Tesla nodes) 
Ensure all equipment operations comply with Tesla&rsquo;s strict safety standards and environmental regulations regarding chemical handling and waste disposal 
Lead safety audits and implement corrective actions for equipment-related hazards</div> 

What You'll Bring<div><ul><li>
Degree in Electrical Engineering, Mechanical Engineering, Materials Science, Chemical Engineering, or equivalent experience 
</li><li>
Minimum of 3&ndash;5 years of experience in semiconductor manufacturing, specifically with CMP equipment (e.g., Applied Materials Endura, Ebara Polaris, or similar)</li><li>
Deep understanding of CMP physics, slurry chemistry, pad conditioning, and metrology</li><li>
Proficiency with data analysis tools (Python, JMP, Minitab) and statistical process control (SPC)</li><li>
Familiarity with SEMI standards and equipment communication protocols (SECS/GEM)</li></ul></div> 

Compensation and Benefits<div>
Benefits</div><div>
Along with competitive pay, as a full-time Tesla employee, you are eligible for the following benefits at day 1 of hire:
<ul><li>Medical plans &gt; plan options with $0 payroll deduction</li>
<li>Family-building, fertility, adoption and surrogacy benefits</li>
<li>Dental (including orthodontic coverage) and vision plans, both have options with a $0 paycheck contribution</li>
<li>Company Paid (Health Savings Accounts) HSA Contribution when enrolled in the High-Deductible medical plan with HSA</li>
<li>Healthcare and Dependent Care Flexible Spending Accounts (FSA)</li>
<li>401(k) with employer match, Employee Stock Purchase Plans, and other financial benefits</li>
<li>Company paid Basic Life, AD&amp;D</li><li>
Short-term and long-term disability insurance (90 day waiting period)</li>
<li>Employee Assistance Program</li>
<li>Sick and Vacation time (Flex time for salary positions, Accrued hours for Hourly positions), and Paid Holidays</li>
<li>Back-up childcare and parenting support resources</li>
<li>Voluntary benefits to include: critical illness, hospital indemnity, accident insurance, theft &amp; legal services, and pet insurance</li>
<li>Weight Loss and Tobacco Cessation Programs</li>
<li>Tesla Babies program</li>
<li>Commuter benefits</li>
<li>Employee discounts and perks program</li> 
</ul></div> 
 
Tesla is an Equal Opportunity / Affirmative Action employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state or local laws. 
 
Tesla is also committed to working with and providing reasonable accommodations to individuals with disabilities. Please let your recruiter know if you need an accommodation at any point during the interview process.</div>

Sr. Equipment Engineer, Chemical Mechanical Planarization

Raytheon

<div>Date Posted:
2026-07-29
Country:
United States of America
Location:
US-MA-ANDOVER-AR2 ~ 362 Lowell St ~ AR2 PLYMOUTH BLDG
Position Role Type:
Onsite
U.S. Citizen, U.S. Person, or Immigration Status Requirements:
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Security Clearance Type:
None/Not Required
Security Clearance Status:
Not Required
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling &ndash; to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today&rsquo;s mission and stay ahead of tomorrow&rsquo;s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 
Raytheon is hiring for a Semiconductor Equipment Engineer assigned to 1st shift (6:30 AM &ndash; 4:00 PM, Monday&ndash;Thursday, plus every other Friday) on a 9/80 schedule. Candidate will be a shift support engineer and be responsible for the uptime and maintenance of various fab processing equipment such as evaporators, coat/develop tracks, Ashers, sputter, Wet/Dry etch tools, etc. and working hands-on in a cleanroom environment. The candidate will maintain, troubleshoot, and repair a variety of systems including and not limited to pumps, bulk fill systems, T/H units, power supplies, etc. This Includes high levels of experience, electrical, electro-mechanical, and gas systems typically found in a semiconductor operation. Future expansion to support a wider range of equipment is expected.
What You Will Do<ul><li>
Diagnosing equipment issues using experience, system knowledge, and technical manuals.</li><li>
Triage and repair equipment based on priority and operational needs.</li><li>
Support the Emergency Response Team (ERT) as needed.</li></ul>
Qualifications You Must Have
<ul><li>Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience unless prohibited by local laws/regulations.</li><li>
Experience maintaining, troubleshooting and/or repairing semiconductor manufacturing equipment.</li><li>
U.S. Citizen - U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.</li></ul>
Qualifications We Prefer<ul><li>
Familiar with SEMI 10 semiconductor standards</li><li>
Read and understand equipment manuals and schematics.</li><li>
Have a fundamental knowledge of SPC controls with the ability to implement SPC control plans on existing equipment and new equipment installations.</li><li>
Able to document work and provide detailed pass down.</li><li>
Ability to pull and analyze tool date.</li><li>
Experience with predictive maintenance and SPC controls using FDC software.</li><li>
Knowledge of thin‑film metrology (ellipsometry, XRR, TEM, XPS, FTIR).</li><li>
Ability to work in a cleanroom environment and support a dynamic production setting.</li><li>
 Proficient use of MS Office products.</li></ul> 
 
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
*Relocation benefits are not eligible for this position.* 
Learn More &amp; Apply Now!
Please consider the following role type definition as you apply for this role. 
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate&rsquo;s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company&rsquo;s performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans&rsquo; Readjustment Assistance Act.
Privacy Policy and Terms:</div>

Semiconductor Equipment Support Engineer – Andover, MA

KBR, Inc.

<div>
 
 
 Title:
 
 
 
 
 Static and Package Equipment Specialist -Offshore Subsea Project - Pkg 2
 
 
 
 
 Belong, Connect, Grow, with KBR!
 
 
 
 
 
 
 The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.
 
 
 
 
 
 Job Title: Static and Package Equipment Specialist
 
 
 
 KBR is growing its Project Management Consultancy (PMC) team for an exciting, high profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based initially in Client or Contractors Office in Abu Dhabi.
 
 
 
 
 Job Purpose
 
 
 
 
 Provide specialist engineering expertise for the selection, design, integrity, reliability, troubleshooting, inspection, maintenance, modification, and lifecycle management of static and package equipment across ADNOC Offshore assets. Ensure equipment reliability, safety, operational integrity, and compliance with ADNOC standards, international codes, and oil &amp; gas industry best practices.
 
 
 
 
 Key Accountabilities
 
 
 
 
 
 Static Equipment Engineering
 
 
 
 Act as the Subject Matter Expert (SME) for static equipment including:
 
 
 <ul>
 <li>
 Pressure Vessels
 </li>
 <li>
 Heat Exchangers
 </li>
 <li>
 Columns and Towers
 </li>
 <li>
 Separators
 </li>
 <li>
 Drums
 </li>
 <li>
 Filters
 </li>
 <li>
 Storage Tanks
 </li>
 <li>
 Reactors
 </li>
 <li>
 Pig Launchers and Receivers
 </li>
 <li>
 Fired Heaters
 </li>
 <li>
 Flare Systems
 </li>
 <li>
 Pressure Relief Systems
 
 
 </li>
 </ul>
 
 
 Responsibilities
 
 
 
 
 <ul>
 <li>
 Review and approve static equipment designs and specifications.
 </li>
 <li>
 Verify compliance with applicable engineering standards and regulations.
 </li>
 <li>
 Support equipment sizing, material selection, and mechanical design reviews.
 </li>
 <li>
 Conduct fitness-for-service evaluations and remaining life assessments.
 </li>
 <li>
 Provide engineering support for equipment repairs and modifications.
 
 
 </li>
 </ul>
 
 Package Equipment Engineering
 
 
 
 
 Provide Technical Expertise For Package Systems Including:
 
 
 
 <ul>
 <li>
 Gas Compression Packages
 </li>
 <li>
 Pump Packages
 </li>
 <li>
 Diesel Generator Packages
 </li>
 <li>
 Air Compressor Packages
 </li>
 <li>
 Nitrogen Generation Units
 </li>
 <li>
 Chemical Injection Skids
 </li>
 <li>
 Produced Water Treatment Packages
 </li>
 <li>
 Fuel Gas Systems
 </li>
 <li>
 HVAC Equipment Packages
 </li>
 <li>
 Water Injection Packages
 </li>
 <li>
 Utility Packages
 
 
 </li>
 </ul>
 
 
 Responsibilities
 
 
 
 
 <ul>
 <li>
 Prepare and review package equipment specifications and datasheets.
 </li>
 <li>
 Conduct technical bid evaluations and vendor assessments.
 </li>
 <li>
 Review supplier documentation and engineering deliverables.
 </li>
 <li>
 Ensure proper integration of package equipment into offshore facilities.
 </li>
 <li>
 Support installation, commissioning, and startup activities.
 
 
 </li>
 </ul>
 
 Technical Authority &amp; Engineering Assurance
 
 
 
 <ul>
 <li>
 Ensure compliance with ADNOC Offshore Engineering Standards.
 </li>
 <li>
 Review engineering design packages during:
 </li>
 <ul>
 <li>
 Conceptual Studies
 </li>
 <li>
 FEED
 </li>
 <li>
 Detailed Engineering
 </li>
 <li>
 EPC Execution
 </li>
 </ul>
 <li>
 Participate in technical reviews and engineering audits.
 </li>
 <li>
 Evaluate vendor deviations and concession requests.
 </li>
 <li>
 Support development and revision of engineering specifications and standards.
 
 </li>
 </ul>
 
 Reliability &amp; Integrity Management
 
 
 
 <ul>
 <li>
 Monitor equipment health and reliability performance.
 </li>
 <li>
 Support implementation of reliability improvement initiatives.
 </li>
 <li>
 Conduct root cause failure analysis (RCFA) for equipment failures.
 </li>
 <li>
 Review inspection reports and recommend corrective actions.
 </li>
 <li>
 Assess corrosion, erosion, fatigue, and material degradation issues.
 </li>
 <li>
 Support Risk-Based Inspection (RBI) programs.
 
 
 </li>
 </ul>
 
 Inspection, Maintenance &amp; Troubleshooting
 
 
 
 <ul>
 <li>
 Provide specialist support during shutdowns and turnarounds.
 </li>
 <li>
 Troubleshoot operational and mechanical issues affecting static and package equipment.
 </li>
 <li>
 Review inspection findings and recommend repair strategies.
 </li>
 <li>
 Develop maintenance strategies and equipment preservation programs.
 </li>
 <li>
 Support inspection teams during major maintenance campaigns.
 
 
 </li>
 </ul>
 
 Project Engineering Support
 
 
 
 <ul>
 <li>
 Provide engineering input for offshore brownfield and greenfield projects.
 </li>
 <li>
 Support equipment procurement and manufacturing oversight.
 </li>
 <li>
 Participate in:
 </li>
 <ul>
 <li>
 Design Reviews
 </li>
 <li>
 HAZOP Studies
 </li>
 <li>
 SIL Reviews
 </li>
 <li>
 Constructability Reviews
 </li>
 <li>
 FAT and SAT Activities
 </li>
 </ul>
 <li>
 Ensure project deliverables meet ADNOC and project requirements.
 
 </li>
 </ul>
 
 Vendor &amp; Contractor Management
 
 
 
 <ul>
 <li>
 Interface with OEMs, suppliers, consultants, and EPC contractors.
 </li>
 <li>
 Review manufacturing and fabrication procedures.
 </li>
 <li>
 Witness shop inspections and testing.
 </li>
 <li>
 Participate in vendor qualification and technical audits.
 
 
 </li>
 </ul>
 
 Health, Safety &amp; Environment (HSE)
 
 
 
 <ul>
 <li>
 Ensure compliance with ADNOC HSE requirements.
 </li>
 <li>
 Participate in:
 </li>
 <ul>
 <li>
 Risk Assessments
 </li>
 <li>
 Incident Investigations
 </li>
 <li>
 Hazard Identification Workshops
 </li>
 </ul>
 <li>
 Promote safe engineering practices and operational excellence.
 
 </li>
 </ul>
 
 
 Qualifications
 
 
 
 
 
 Minimum Qualification
 
 
 
 <ul>
 <li>
 Bachelor's Degree in:
 </li>
 <ul>
 <li>
 Mechanical Engineering
 </li>
 <li>
 Materials Engineering
 </li>
 <li>
 Equivalent Engineering Discipline
 
 </li>
 </ul>
 </ul>
 
 
 Preferred Qualification
 
 
 
 
 <ul>
 <li>
 Master's Degree in Mechanical Engineering.
 </li>
 <li>
 Chartered Engineer (CEng) status preferred.
 
 
 </li>
 </ul>
 
 
 Professional Certifications (Preferred)
 
 
 
 
 <ul>
 <li>
 API 510 &ndash; Pressure Vessel Inspector
 </li>
 <li>
 API 580 / 581 &ndash; RBI Certification
 </li>
 <li>
 API 653 &ndash; Storage Tank Inspector
 </li>
 <li>
 ASME Certification Knowledge
 </li>
 <li>
 NACE Corrosion Certification
 </li>
 <li>
 AMPP Certification
 
 
 </li>
 </ul>
 
 
 Experience
 
 
 
 
 
 Minimum Experience
 
 
 
 <ul>
 <li>
 15 years of experience in Oil &amp; Gas Engineering.
 </li>
 <li>
 Minimum 8 years in static and package equipment engineering.
 </li>
 <li>
 Experience in offshore facilities and ADNOC or major operator projects preferred.
 
 
 </li>
 </ul>
 
 
 Preferred Industry Experience
 
 
 
 
 <ul>
 <li>
 Offshore Production Facilities
 </li>
 <li>
 Gas Processing Plants
 </li>
 <li>
 Oil Processing Facilities
 </li>
 <li>
 EPC/EPCI Projects
 </li>
 <li>
 Brownfield Modifications
 </li>
 <li>
 Large Capital Projects
 
 
 </li>
 </ul>
 
 
 Technical Skills
 
 
 
 
 
 Static Equipment
 
 
 
 <ul>
 <li>
 Pressure Vessel Design
 </li>
 <li>
 Heat Exchanger Design
 </li>
 <li>
 Fired Heater Systems
 </li>
 <li>
 Tank Design
 </li>
 <li>
 Flare System Engineering
 </li>
 <li>
 Piping Interface Knowledge
 </li>
 <li>
 Material Selection
 
 
 </li>
 </ul>
 
 Package Equipment
 
 
 
 <ul>
 <li>
 Compressor Packages
 </li>
 <li>
 Pump Packages
 </li>
 <li>
 Utility Skids
 </li>
 <li>
 Chemical Injection Systems
 </li>
 <li>
 Water Treatment Packages
 </li>
 <li>
 HVAC Packages
 
 
 </li>
 </ul>
 
 Integrity Management
 
 
 
 <ul>
 <li>
 Risk-Based Inspection (RBI)
 </li>
 <li>
 Fitness for Service (FFS)
 </li>
 <li>
 Corrosion Assessment
 </li>
 <li>
 Mechanical Integrity Programs
 </li>
 <li>
 Root Cause Analysis (RCA)
 
 
 </li>
 </ul>
 
 Engineering Software
 
 
 
 <ul>
 <li>
 PV Elite
 </li>
 <li>
 Compress
 </li>
 <li>
 Aspen HYSYS (awareness)
 </li>
 <li>
 AutoCAD
 </li>
 <li>
 SmartPlant
 </li>
 <li>
 SAP PM
 
 
 </li>
 </ul>
 
 Knowledge of Industry Standards
 
 
 
 
 Strong Working Knowledge Of:
 
 
 
 
 ASME Standards
 
 
 
 <ul>
 <li>
 ASME Section VIII
 </li>
 <li>
 ASME B31.3
 </li>
 <li>
 ASME PCC-2
 
 
 </li>
 </ul>
 
 API Standards
 
 
 
 <ul>
 <li>
 API 510
 </li>
 <li>
 API 570
 </li>
 <li>
 API 571
 </li>
 <li>
 API 579
 </li>
 <li>
 API 580 / 581
 </li>
 <li>
 API 650
 </li>
 <li>
 API 653
 
 
 </li>
 </ul>
 
 International Standards
 
 
 
 <ul>
 <li>
 ISO Standards
 </li>
 <li>
 NACE/AMPP Standards
 </li>
 <li>
 DNV Standards
 </li>
 <li>
 ADNOC Offshore Standards
 
 
 </li>
 </ul>
 
 R2126791
 
</div>

Static and Package Equipment Specialist -Offshore Subsea Project - Pkg 2

United Arab Emirates University

Job Description
 
The NSSTC is looking to hire Mechanical Engineer to support the development of the NSSTC facility, to design and develop ground support and test equipment, and to create electro-mechanical hardware intended for both ground and space operation. You’ll be working as part of a team designing and building CubeSats and Small Spacecraft as part of the center’s charter. As an engineer you will be asked to perform a variety of tasks related to the development of the center including (but not limited to) support of the facilities development; test equipment development; and design, analysis, assembly, test, and verification/validation of performance of ground and space-based hardware and software. The ability to work with students at UAE University as a mentor is required. Travel may be required – both domestic and international. The position is located at the NSSTC facility in Al Ain. Compensation based on experience level. Tasks and Responsibilities: • Interfacing with a multi-disciplinary team including professionals, faculty, graduate and undergraduate students • Documenting interfaces and requirements • Designing discipline-specific components for space flight applications • Modeling and analyzing designs of ground and space hardware • Performing other engineering tasks (analyzing mass properties, structure development, harness routing, simple stress and/or thermal analysis, design development, production planning, drawing creation, etc.) • Support assembly and integration operation
 Minimum Qualification
 
<ul>
<li>Bachelor or higher degree in Mechanical Engineering</li>
</ul>
Preferred Qualification
 
<ul>
<li>Demonstrated experience with CAD tools • Familiarity with designing and packaging electro-mechanical systems for the space environment • Cleanroom experience</li>
</ul>
Close Date Kindly apply
 before the closing date.
 
31/12/2026

Mechanical Engineer

MMR Group

<div>MMR Cost Engineer - based in Abilene, TX 
 
Location: Abilene, TX 
Pay: $43-$50/hour based on experience 
Per Diem: $900/week 
Work Schedule: 6/10s
Company Culture:
At MMR, our most valuable assets are not our buildings or equipment, it is our family of employees with diverse backgrounds and experiences. Our investment in training programs and resources allows our employees to reach both their personal and professional goals. This is evident with MMR receiving numerous awards including &ldquo;Best Place to Work&rdquo; and consistently being recognized as one of the top Engineering News Record&rsquo;s &ldquo;Annual Specialty Contractors.&rdquo;
Organization Description:
MMR has served as the industry leader in instrumentation and electrical construction, maintenance, and technical services for over 30 years. Our diverse list of clients allows us the unique ability to work across industry lines in the oil and gas upstream and midstream as well as chemical and petrochemical downstream, industrial manufacturing, power generation, renewable energy, mission critical, heavy commercial, and energy storage sectors. MMR holds the proud distinction of being the largest privately owned &ldquo;Open Shop&rdquo; contractor in the United States with over 30 branch offices including global locations in Canada and Mexico. For more information, please visit our website: www.mmrgrp.com.
Job Description:
MMR is seeking Cost Engineer candidates to manage project cost control processes, including labor productivity tracking, earned value analysis, forecasts, pay applications, invoice audits, and cost reporting to provide accurate financial insight to project leadership. The responsibilities would include, but not limited to, the following:<ul><li>
Track labor productivity and budget performance</li><li>
Maintain cost reports and forecasts</li><li>
Perform earned value and variance analysis</li><li>
Support change order pricing and estimates</li><li>
Monitor quantities and commodity usage</li><li>
Provide financial insights to project leadership</li><li>
Build and maintain account receivable and payable reports</li><li>
Create and submit monthly pay applications</li><li>
Perform labor, equipment, and material invoice audits</li><li>
Maintain material sales tax logs</li><li>
Perform other related duties as assigned by supervisor and upper management.</li></ul>
Required Skills and Qualifications:<ul><li>
BS degree in Accounting, Business Management, Construction Management, Industrial Engineering or related field; or an equivalent relevant work experience</li><li>
Ability to work independently, prioritize, organize, problem solve, and exercise good judgement with minimal supervision</li><li>
Ability to coordinate a variety of projects simultaneously</li><li>
Ability to demonstrate flexibility and creativity</li><li>
Working knowledge of MS Office software</li><li>
Strong organizational and interpersonal skills are required</li><li>
Able to work effectively under time pressure and/or deadline</li><li>
Excellent verbal and written communication skills</li><li>
Willingness to work flexible, varying hours, including evenings and weekends as needed</li><li>
Regular and reliable attendance at work</li></ul>
MMR Group, Inc. and its affiliated companies (&quot;MMR&quot;) is an Equal Opportunity Employer and does not discriminate on the basis of race, color, national origin, religion, sex, age, veteran status, genetic information or any other legally protected class.
UVqysIsCup</div>

Cost Engineer

Rosendin Electric

<div>Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more.
<h2 class="jobSectionHeader">Why Rosendin?</h2>
<h2 class="jobSectionHeader">Committed. Innovative. Engaged.</h2>
If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder!
<h2 class="jobSectionHeader">YOUR NEXT OPPORTUNITY:</h2>
Field Engineer is engineering position to directly support projects and is located on jobsites or with regular onsite presence and is expected to learn and develop competency in the Essential Duties and Responsibilities. Part of the responsibility will be to provide technical engineering design, consultation, information, and assistance to internal and external customers under the direct supervision of the Engineering Team Lead or Manager to ensure that the project complies with all engineering standards and follows the electrical design intent.
<h2 class="jobSectionHeader">WHAT YOU'LL DO:</h2><ul><li>
May oversee or collaborate with Designers assigned to your work or team.</li><li>
Review, comment, and process equipment and system submittals.</li><li>
Review, comment, and process project requests for information (RFIs).</li><li>
Assist senior engineers with field observations, design interpretations, and design updates during construction.</li><li>
Assist on site field and project management team and develop skills pertaining to drawing interpretation problems, conflicts, interferences, and errors.</li><li>
Perform coordination between architectural, structural, low voltage/communications, mechanical, and plumbing processes and all electrical trades.</li><li>
Prepare or update designs, check, and specify power, lighting, and auxiliary systems for the specific project(s) assigned.</li><li>
Develop or update power single-line diagrams for the specific projects assigned.</li><li>
Review short circuit studies and verify over current protection device settings in the field.</li><li>
Coordinate with the project specifications or equipment buy-out.</li><li>
Participate in project team meetings. May interface with various team members, architects, and mechanical contractors/engineers.</li><li>
Work closely with the engineering supervisor to understand design criteria and budgetary issues.</li><li>
Assist with the review of plans and technical specifications, contract documents, and estimates under the supervision of a senior engineer.</li><li>
The duties and responsibilities describe this position's general nature and scope of work. This is a partial listing, and other responsibilities will be assigned based on the position's role within the business unit.
</li></ul><h2 class="jobSectionHeader">WHAT YOU BRING TO US:
</h2><ul><li>Bachelor's degree in electrical engineering, architectural engineering, construction sciences, or equivalent experience.</li><li>
Can be a combination of education, training, and relevant experience</li></ul>
<h2 class="jobSectionHeader">WHAT YOU'LL NEED TO BE SUCCESSFUL:
</h2><ul><li>Ability to learn Engineering Analytic programs for short circuits, over current coordination, and arc flash mitigation programs, e.g., SKM, E-Tap, etc.</li><li>
Develop familiarity with codes, and energy efficiency requirements</li><li>
Ability to learn and become competent in Autodesk, Microsoft Office (Outlook, Word, Excel, etc.), and Illuminance software.</li><li>
Ability to manage multiple tasks under the supervisor's direction.</li><li>
Ability to work to meet deadlines and adapt to changing requirements with a positive attitude</li><li>
Effective oral and written communication skills as required for the position</li><li>
Ability to be self-motivated, proactive, and an effective team player</li><li>
Ability to interact effectively and professionally.</li></ul>
<h2 class="jobSectionHeader">TRAVEL:</h2><ul><li>
100% - The position is based on project jobsites</li></ul>
<h2 class="jobSectionHeader">WORKING CONDITIONS:</h2><ul><li>
General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions, such as fluorescent lighting and air conditioning</li><li>
Noise level is usually low to medium</li><li>
Occasional lifting of up to 40 lbs.</li><li>
We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions.</li></ul>
Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law.<h2 class="jobSectionHeader">
YOU Matter - Our Benefits
</h2><ul><li>ESOP - Employee Stock Ownership</li><li>
401K</li><li>
Annual bonus program based upon performance, profitability, and achievement</li><li>
17 PTO days per year plus 10 paid holidays</li><li>
Medical, Dental, Vision Insurance</li><li>
Term Life, AD&amp;D Insurance, and Voluntary Life Insurance</li><li>
Disability Income Protection Insurance</li><li>
Pre-tax Flexible Spending Plans (Health and Dependent Care)</li><li>
Charitable Giving Match with our Rosendin Foundation</li></ul>
Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career.
Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law.</div>

Field Engineer (Designer)

Search 7072+ Equipment engineer jobs near you this August. New roles added regularly across leading industries. Apply today.

7072 equipment engineer jobs Near Me

Sr. Equipment Engineer, Chemical Mechanical Planarization

Semiconductor Equipment Support Engineer – Andover, MA

Static and Package Equipment Specialist -Offshore Subsea Project - Pkg 2

Mechanical Engineer

Cost Engineer

Field Engineer (Designer)

Field Engineer (Designer)