inspector

Korry Electronics

Full Time
 On-Site
 
Everett, WA, USA
 
About Korry Electronics
 
Since 1937, Korry Electronics has been a leader in innovative Human-Machine Interface (HMI) solutions, driving the evolution of the cockpit of tomorrow. Our cutting-edge switches, controls, integrated displays, and night-vision filters are at the forefront of the military and commercial aviation industries. If you are passionate about precision engineering and emerging technologies, join us in shaping the future of flight through groundbreaking advancements.
 
What You Will Do: 
As an Inspector, you will follow Korry procedures to inspect processes and products from our production line. Will perform manual and clerical duties and use computer to track, log, verify, and report the inspection results. The inspector will review the requirements, and will use various measuring devices to perform required inspections, and will determine if processes and products meet all customer and regulatory requirements.
 
Primary Responsibilities: 
Understand and follow the established inspection processes based on area assigned.
 
Product Inspection: 
Inspect product while using common measuring equipment including, but not limited to: CMM, micrometers, calipers, height gauges, radius gauges, surface plates, Go No-Go pins.
 Review all paperwork required by the Job Order for completeness and accuracy.
 Review provided first article reports for completeness per AS9102.
 Review any Discrepancy reports on previously produced products. Note discrepancies, stated causes, and corrective action. Use this information to indicate possible problem areas.
 Write clear Discrepancy Reports if parts are rejected.
 Identify and resolve discrepancies and write clear discrepancy reports if inspected item is rejected.
 Collaborate with partners in operations, customer service, and planning to resolve issues.
 Performs special projects/tasks as assigned
 
Preferred Education
 
High school diploma or equivalent
 
Preferred Experience
 
Minimum 2+ years relevant experience
 
Preferred Specialized Skills and Abilities
 
Product Inspection: 
Knowledge of shop mathematics, blueprint reading, geometric tolerancing and SPC.
 Working knowledge of common inspection, measuring equipment, including, but not limited to: CMM (coordinate measurement machine), micrometers, calipers, height gauges, radius gauges, surface plates, Go No-Go pins.
 Able to interpret drawings and part specifications, review and understand Job Order requirements.
 Good understanding of AS9100, AS9102 standards requirements (standardized quality management system) and experience working within aerospace industry.
 Attention to detail and ability to handle multiple priorities, willingness to learn and receive training.
 
Physical Requirements: 
Frequent use of personal computers, database and digital platforms, and other office productivity machinery, such as copy machines and computer printers.
 Frequently uses hands, fingers, and arms to reach, handle, touch or feel equipment, materials, and computer.
 The person in this position needs to frequently move inside the office
 Frequent close vision and the ability to adjust focus.
 Occasionally use of steps, or ladder.
 The employee must occasionally lift and/or move up to 50 pounds.
 Seldom to occasionally position self to stoop, kneel, crouch, or crawl.
 
Salary Range
 Please note the typical hiring range is $25.13 - $34.00 hourly. Job offers within the range are based on significant job qualifications and pay equity.
 
Korry Electronics Competitive Benefits Package: 
401(k) matching
 12 paid holidays
 Minimum of three weeks paid time off plus one week paid sick time to start
 Comprehensive Medical, Dental and Vision
 Health Savings Account (HSA) with generous company contribution
 Flexible Spending Accounts (FSA)
 Tuition reimbursement
 Parental leave
 Short term and long term disability
 Life insurance
 Accidental death & dismemberment insurance
 Long-term care plan options
 Prescription safety shoe & glasses benefit
 Vanpool subsidy
 Recognition awards
 Employee referral bonuses
 EAP (Employee Assistance Program)
 
Eligible candidates must be authorized to work in the U.S.
 
This position requires access to export control information. To conform to US Export Control regulations, applicant should be eligible for any required authorizations from the US Government.
 
Korry Electronics is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of age, race, color, religion, sex, sexual orientation, gender identity or expression, medical condition, national origin, marital status, disability, pregnancy or parental status, childbirth, genetic information, or military and veteran status.
 
Company Description: 
Eligible candidates must be authorized to work in the U.S.
 
This position requires access to export control information. To conform to US Export Control regulations, applicant should be eligible for any required authorizations from the US Government.
 
Korry Electronics is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of age, race, color, religion, sex, sexual orientation, gender identity or expression, medical condition, national origin, marital status, disability, pregnancy or parental status, childbirth, genetic information, or military and veteran status.
 
Thank you for your interest in Korry Electronics!
 
Our company culture is focused around ownership, transparency, process improvement and trust & respect. We are looking for talented people (like you!) to lead our business to the next level while giving you the opportunity to develop your own career.
 
We have been at the forefront of the aviation industry since the beginning, creating the first lighted cockpit controls for the military and commercial aircraft industry. The Korry product team continues this tradition as it develops the crew station of the future, providing state-of-the-art switches, cockpit controls, high-performance displays, and night-vision filters. We are passionate about what we do. For more information, please visit www.korry.com.
 
Join the Korry team and find out why this is such a great place to spend your career!
 
Korry Electronics is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of age, race, color, religion, sex, sexual orientation, gender identity or expression, medical condition, national origin, marital status, disability, pregnancy or parental status, childbirth, genetic information, or military and veteran status.

Inspector - 303

Sims Limited

<div>Sims Metal (Sims) is a global leader in metal recycling. With facilities across the globe, Sims plays an intrinsic role in the circular economy by making resources available for future use. As a responsible corporate citizen, we continuously seek new ways to broaden our participation in the environmental sector, ensuring that our future is as bright, safe, and secure as at any time in our long history.
<div><div><div><div>
Job Summary: 
The Ferrous Materials Inspector is responsible for inspecting incoming ferrous materials to ensure they meet company specifications and quality standards. This role also involves purchasing compliant materials and maintaining accurate documentation. The ideal candidate will be detail-oriented, safety-conscious, and capable of operating in a fast-paced environment.
Key Responsibilities:<ul><li>
Ensure a safe working environment by following all company safety policies and procedures.</li><li>
Examine customer-delivered ferrous materials to identify the appropriate commodity classification.</li><li>
Determine the purchase category and approve or reject materials based on established specifications.</li><li>
Utilize a computer kiosk to input purchases and process transactions.</li><li>
Inspect materials to confirm compliance with internal quality control standards and applicable regulations.</li><li>
Apply approval or rejection markings as needed and document inspection findings in detailed reports.</li><li>
Perform other duties as assigned by management.</li></ul>
Qualifications:<ul><li>
High school diploma or General Education Development (GED) certificate required.</li><li>
1&ndash;3 months of relevant experience or training, or an equivalent combination of education and experience.</li><li>
Ability to read, speak, and understand English; Spanish language skills are a plus but not required.</li><li>
Basic computer proficiency and the ability to learn internal systems.</li><li>
Strong attention to detail and the ability to make sound decisions based on inspection criteria.</li></ul>
Physical Requirements: 
The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.<ul><li>
Regularly required to stand, walk, and use hands to handle or feel materials.</li><li>
Frequently required to reach, climb, balance, talk, and hear.</li><li>
Must frequently stoop, kneel, crouch, or crawl.</li><li>
Must regularly lift and/or move up to 25 pounds, frequently up to 50 pounds, and occasionally up to 100 pounds.</li><li>
Specific vision requirements include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.</li></ul></div></div></div></div> 


A career with Sims provides you with the opportunity to work with an organization whose goal is to be the world&rsquo;s safest and most responsible recycling company. Our people achieve this by creating a zero-harm workplace, being exemplary members of the communities in which we operate, and being responsible stewards of the environment. We also offer competitive pay and a range of attractive benefits.
Sims is proud to be an equal opportunity employer. We value the diversity of all of our employees and are committed to creating an inclusive working environment where everyone can contribute, advance on merit, and realize their full potential. Sims does not discriminate with regard to race, sex, religion, color, national origin, citizenship status, disability, age, marital or familial status, sexual orientation, gender identity, gender expression, veteran status, housing status, source of income, or any other status protected by federal, state, or local laws. This applies to any employment decision, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. qualified applicants with a disability in need of a reasonable accommodation may request such without fear of reprisal or discrimination.
To achieve our purpose to create a world without waste to preserve our planet, we are guided by our Principles of Purpose: Be Safe + Well, Band Together, Be Accountable + Transparent, Consistently Innovate, Inspire with Purpose, Celebrate + Have Fun.</div>

Inspector

Swan Global WLL

Urgent Hiring &ndash; QC InspectorLocation: Ras Laffan Start: ASAP Duration: 2 Months (Extendable) Salary: Competitive (TBD) FAT: Provided by ClientRequirements: BGAS Level 1 / Level 2 or NACE Level 2 Certification Minimum 10 years&rsquo; experience as a Coating Inspector At least 6 years post-certification experience Minimum 6 years GCC Oil &amp; Gas project experience Must have valid QID &amp; be available on freelance/own visaApplication Question(s):<ul><li>Are you on Freelance visa ?</li><li>Do you have BGAS Level 1 / Level 2 or NACE Level 2 Certification</li></ul><ul><li>How many years experience as a Coating Inspector</li></ul><ul><li>Do you have At least 6 years post-certification experience</li><li>Do you have Minimum 6 years GCC Oil &amp; Gas project experience</li></ul>Work Location: In person

QC Inspector

Zachry Group

<div>Position Summary
QA/QC Inspectors will test welders and sample and inspect raw materials, fabricated, machined, assembled structures, and industrial processes for quality, deviations, or defects according to specifications. This position will also inspect welds, flange assemblies, and weld map.
Qualification Highlights
<ul><li>Must have a current Certified Welding Inspector (CWI) Certificate or Quality Control experience.
</li><li>Must have 3+ years of experience working as a welding inspector.
</li><li>Must be able to meet all physical requirements.
</li><li>Must be able to work at heights more than 300 ft.
</li><li>Must have all required tools.
</li><li>Must have reliable transportation.</li></ul></div>
 <div>Required Qualifications
<ul><li>Must have CWI certification or QC experience.
</li><li>Must have 3+ years&rsquo; experience as a CWI inspector or QC experience
</li><li>Must have extensive knowledge of multiple types of welding processes, and the materials used for each process.
</li><li>Must have good interpersonal skills.
</li><li>Must be organized
</li><li>Must have good oral communication skills
</li><li>Must be able to work in Excel and Microsoft Office
</li><li>Must be a team player and have effective communication skill in dealing with co-workers and any other work-related contacts.
</li><li>Must have basic knowledge of the construction processes involved in heavy industrial construction.
</li><li>Must be able to use problem solving skills and critical thinking to resolve and identify issues, including safety risks.
</li><li>Must be willing to follow all company directives and safety procedures.
</li><li>Must be able to work at heights.
</li><li>Must have reliable transportation.
</li></ul>Preferred Additional Qualification
<ul><li>Current Zachry or Zachry ROF&rsquo;ed employee.
</li><li>Former experience working with Zachry Industrial, Inc.
</li><li>Experience working as a welder on industrial construction projects.
</li></ul>JOB REQUIREMENTS
ZACHRY is dedicated in providing a safe and drug free work environment and is an equal opportunity employer.
CERTIFICATIONS AND/OR LICENSES REQUIRED *
Certified Welding Inspector (CWI)
OTHER POSITION OR SITE REQUIREMENTS
<div>Job Specific Requirements
</div>DOES THIS POSITION REQUIRE A COMPUTER? *
Yes
BACKGROUND CHECK *
Yes
REQUIREMENTS MEDICAL *
<ul><li>Drug Screen
</li><li>Pre-Employment Physical
</li><li>Scott AV 2000 FF
</li><li>3M 6000 Half Face</li></ul></div>

Delta International PK

Requried for Reko Diq - ChaghiHSE Inspector &ndash; Job DescriptionWe are seeking a qualified HSE Inspector to monitor workplace safety, ensure compliance with health, safety, and environmental regulations, and support project teams in maintaining safe working conditions.Key Responsibilities:<ul><li>Conduct regular site inspections and safety audits</li><li>Ensure compliance with HSE policies and regulations</li><li>Identify hazards and recommend corrective actions</li><li>Monitor the use of PPE and safe work practices</li><li>Investigate incidents and prepare reports</li><li>Coordinate with project teams to improve safety performance</li><li>Provide safety training and awareness sessions</li></ul>Requirements:<ul><li>Proven experience as an HSE Inspector or similar role</li><li>Strong knowledge of HSE standards and regulations</li><li>Good communication and reporting skills</li><li>Ability to work on-site and handle multiple tasks</li><li>Relevant certification (e.g., NEBOSH, OSHA) preferred</li></ul>Job Type: Full-timeWork Location: In person

HSE Inspector

Epcon Partners

<div><div>WELDING INSPECTOR &mdash; METER STATION 
</div><div></div> 
<div>POSITION SUMMARY The Welding Inspector &ndash; Meter Station performs on-site inspection and documentation of all welding activities associated with meter station construction and installation. Working under the direction of the Chief Inspector or QA/QC Manager, this individual ensures all welding scopes are executed in accordance with approved WPSs, project specifications, client requirements, and applicable codes. A current AWS CWI certification is required for this position.</div><div></div><div> 
KEY RESPONSIBILITIES</div><ul>
<li>Perform visual and dimensional inspection of all welds on meter station piping, structural, and equipment tie-in scopes</li>
<li>Review and verify welder qualifications, Welding Procedure Specifications (WPSs), and Procedure Qualification Records (PQRs) prior to work commencement</li>
<li>Monitor preheat, interpass temperature, and post-weld heat treatment (PWHT) requirements per applicable code and project specifications</li>
<li>Witness and document fit-up, root, fill, and cap passes on critical welds; enforce hold and witness points per the ITP</li>
<li>Coordinate and document NDE activities including RT, UT, MT, and PT; review NDE reports for accuracy and compliance</li>
<li>Identify and document weld defects; initiate NCRs and track repairs through to accepted re-inspection</li>
<li>Verify consumable traceability, storage, and handling (low-hydrogen requirements, bake-out procedures, etc.)</li>
<li>Maintain accurate daily weld logs, inspection records, and photo documentation</li>
<li>Review contractor as-built weld maps and ensure all weld records are complete for turnover packages</li>
<li>Communicate inspection findings clearly to the Chief Inspector, contractor supervision, and client representatives as required</li>
<li>Participate in daily safety meetings and adhere to all site HSE requirements</li> 
</ul><div></div> 
<div>﻿MINIMUM QUALIFICATIONS</div><ul>
<li>5+ years of welding inspection experience on oil and gas pipeline, midstream, or facility construction projects</li>
<li>Current AWS CWI certification &mdash; required, no exceptions</li>
<li>Strong working knowledge of API 1104, ASME B31.4, ASME B31.8, and ASME Section IX</li>
<li>Experience with carbon steel and stainless steel piping systems; familiarity with alloy materials a plus</li>
<li>Ability to read and interpret isometric drawings, weld maps, WPSs, and engineering specifications</li>
<li>Hands-on experience coordinating NDE activities and reviewing RT/UT/MT/PT reports</li>
<li>Solid documentation skills; experience with ITP hold/witness points and NCR processes</li>
<li>Ability to work independently and make sound inspection decisions in the field</li></ul></div><div></div>

Welding Inspector

Ryan Fireprotection, Inc.

<div><div>Job Title: Quality Inspector 
Location: 9740 E 148th Street, Noblesville, IN (On-site at HQ) 
Schedule: Full-time, Monday&ndash;Friday, 6:00am&ndash;3:30pm</div>
<div></div><div>About the Role 
We are seeking a detail-oriented and experienced Quality Inspector to join our team! This is an on-site role in our fabrication and warehousing operations areas, where you will be responsible for ensuring that mechanical parts, assemblies, and processes meet our strict quality standards. The ideal candidate will have a strong background in mechanical inspection and quality systems.</div>
<div></div><div>Responsibilities</div>
<ul><li>Perform inspections on incoming, in-process, and finished parts, assemblies, and products.</li>
<li>Interpret and apply mechanical drawings, specifications, and quality standards.</li>
<li>Use precision measuring instruments and equipment (calipers, micrometers, gauges, etc.) to verify conformance.</li>
<li>Document inspection results, identify nonconformances, and communicate findings to production and engineering teams.</li>
<li>Assist in root cause analysis and corrective action activities as needed.</li>
<li>Support continuous improvement initiatives and adherence to company quality standards.</li>
</ul><div>Qualifications</div>
<ul><li>Excellent attention to detail, organizational skills, and communication abilities.</li>
<li>Proven experience as a Quality Inspector or in a similar quality role within a mechanical/manufacturing environment (1-3 years required).</li>
<li>Strong knowledge of mechanical components, tolerances, and inspection methods.</li>
<li>Proficiency with precision measuring tools and basic statistical process control concepts.</li>
<li>Ability to read and interpret mechanical blueprints and technical drawings.</li>
<li>ASQ certification (CQI or similar) is not required, but desirable.</li></ul></div>

Quality Inspector

Search 829+ Inspector jobs near you this April. New roles added regularly across leading industries. Apply today.

829 inspector jobs Near Me

Inspector - 303

Inspector

QC Inspector

QC Inspector

HSE Inspector

Welding Inspector

Quality Inspector