instrumentation & control engineer

Core for Infrastructure Works Co. W.L.L by Al Nisf Group

Instrumentation &amp; Control (I&amp;C) EngineerExperience Required: Minimum 5 years in field instrumentation, preferably in water and wastewater projects.Role Summary:We are seeking a skilled Field Instrumentation / I&amp;C Engineer to support design, implementation, and commissioning of instrumentation systems. The ideal candidate will have strong knowledge of process instrumentation, control system integration, and field installation practices, with proven experience in technical documentation and project support.Key Responsibilities &amp; Expertise:<ul><li>Field Experience: Minimum 5 years of experience in field instrumentation, preferably within water and wastewater projects.</li><li>Process Instrumentation Knowledge: Strong understanding of process instrumentation (flow, pressure, level, temperature, analytical) and their integration into control systems.</li><li>Instrumentation Selection: Ability to analyze process requirements and select appropriate instrumentation solutions based on technical and commercial criteria.</li><li>P&amp;ID and Documentation Skills: Proficient in drafting and interpreting P&amp;ID diagrams, instrumentation layouts, and control philosophies.</li><li>Product Selection and Vendor Evaluation: Experience in product selection, preparation of datasheets, technical submittals, and vendor evaluations.</li><li>Control Panels and Field Installation: Knowledge of control panel design, instrument wiring, and field installation practices.</li><li>Field Wiring and Loop Checks: Field wiring and loop check experience &mdash; ability to verify signal integrity, troubleshoot wiring issues, and support commissioning activities.</li><li>Documentation and Calibration: Strong documentation skills for preparing instrument indexes, loop diagrams, and calibration procedures.</li><li>Commissioning and Troubleshooting: Experience in site commissioning, troubleshooting, and functional testing of instrumentation (considered an added advantage).</li></ul>Preferred Qualifications:<ul><li>Degree/Diploma in Instrumentation, Electrical, or related engineering field.</li><li>Familiarity with international standards and specifications.</li><li>Strong communication and documentation skills.</li></ul>Work Location: In person

Instrumentation and Control Engineer

Penspen

<div><div>Senior Instrument Engineer

Penspen www.penspen.com are looking for a Senior Instrument Engineer.

The primary location is Woking, Surrey, United Kingdom, you may be required to travel &amp; work in Al Khafji, KSA.

The Senior Instrument Engineer may operate within the Core Engineering Team or PMT project team environment. The Senior Instrument Engineer may have engineer grade instrument personnel under his responsibility and will be tasked with their control and management and the delegation of activities to such support personnel. The Senior Instrument Engineer may work under the supervision of a Lead Instrument Engineer in which case his responsibilities will be as delegated. The Senior Instrument Engineer may be in charge of any or all of the following tasks.

Knowledge / Experience (Skills):
<ul><li>At least 12 years of experience; 6 years of them within the field of Instrumentation &amp; Control Engineering for major Oil and Gas/Petrochemical projects.</li><li>PMC experience at similar role for at least several years is preferable.</li><li>Knowledge of Saudi Aramco Desktop Standard and procedures/practices is beneficial.</li><li>Previous exposure to construction and commissioning phases is beneficial but not mandatory.</li><li>Computer literate with all MS Packages, particularly Word and Excel proficient.</li><li>Experience both in Instrumentation &amp; Telecommunication.</li></ul><div> 
Qualifications: 
<ul><li>Bachelor&rsquo;s Degree in Instrumentation &amp; Control Engineering/Electrical/Electronic or Mechanical Engineering</li></ul></div> 


If you have the skills, please apply by clicking this link - https://careers.penspen.com/vacancy/senior-instrument-engineer-608188.html#hs_show_apply_popup=true

#LI- AS2

#LI-ONSITE</div></div>

Senior Instrument Engineer

<div>
 
 
 Job purpose
 
 
 
 Provides technical expertise, analysis and operation support for Instrumentation &amp; Control Engineering Services at OQ8, TSD department, under Manager Engineering scope&rsquo;s; through (1) Plan and execute instrumentation engineering services for minor projects in conjunction with project management requirements, (2) Provide technical inputs to the instrumentation design, engineering, construction and installation of project scope / plant modification with focus on the successful execution of the project in accordance to engineering best practice &amp; department strategy, (3) Establishes Instrument &amp; Control maintenance strategy and facilitates detailed planning of all maintenance work, (4) Coordination and supervision of assets, products and maintenance work in the designated area; in order to ensure that the equipment design meets the approved engineering design criteria, applicable code &amp; standard and functional requirements including compliance with department strategy and project specifications.
 
 
 
 
 
 
 Main tasks and responsibilities
 
 
 
 
 
 
 
 Instrument
 
 
 <ul>
 <li>
 Provides instrument engineering expertise that results in time/cost-effective/safe, reliable, and high-quality customer-focused Engineering Services packages for refinery &amp; petrochemicals unit CAPEX &amp; MOC projects.
 </li>
 <li>
 Support plant emergencies and provide required engineering service in the Instrumentation discipline.
 </li>
 <li>
 Provide state of art technological solutions for the plant problems (appropriations request) referred by the Maintenance Team.
 </li>
 <li>
 Associated with RCA, HAZOP, FEED studies and contribute as required by the studies/ design.
 </li>
 <li>
 Support implementation of RCA recommendations by providing required engineering documents.
 </li>
 <li>
 Carry out field inspection during all Projects (CAPEX/MOC/AR) implementation and generates Punch points for the deviations against the approved engineering drawings/specifications.
 </li>
 <li>
 Coordinate with external consultant for Safety Integrity Level (SIL) studies of the new projects/facility by adhering to required tendering Process.
 </li>
 <li>
 Executes the Insurance Audit recommendations and ensures compliance with required industrial practice/norms.
 </li>
 <li>
 Executes the Integrated Management system (IMS) audit recommendations and ensures to comply with the required industrial practice/norms/standards.
 </li>
 <li>
 Continuously improved capabilities, processes, procedures, practices, and systems.
 </li>
 <li>
 Provide inputs on Management of change (MOC), while initial review &amp; approval is in progress.
 </li>
 <li>
 Provides engineering package &amp; cost estimations to MOC and appropriation requests in the instrumentation discipline.
 </li>
 <li>
 Participates in progress review meetings with contractors to monitor performance and suggests corrective steps in case of deviation from agreed schedules.
 </li>
 <li>
 Work on SmartPlant Instrumentation (SPI), carry out a quality check to ensure the databases submitted by EPC Contractors are as per Contract scope and good engineering practice.
 </li>
 <li>
 Offers guidance to contracting supervisors as required.
 </li>
 <li>
 Ensure that project completion, acceptance, and handover procedures are implemented as per project specification, company policy, and applicable code &amp; standard.
 </li>
 <li>
 Develop and provide effective Training Programs for the development of trainees &amp; young engineers.
 </li>
 </ul>
 
 
 
 
 
 Control Systems:
 
 
 
 
 
 <ul>
 <li>
 Delegate, designate, supervises, and controls all work for control systems maintenance and tuning.
 </li>
 <li>
 Receives and analyses periodic reports on control systems maintenance and scheduled turnarounds and determines the best course of action for increasing the section&rsquo;s efficiency.
 </li>
 <li>
 Provides full technical &amp; manpower support during plants&rsquo; normal run and shutdown.
 </li>
 <li>
 Determines long-term control systems&rsquo; maintenance policy and oversees detailed planning of maintenance activities and programs.
 </li>
 <li>
 Lead, produce and maintain the lifecycle management plan for control systems, and subsequently provide forecast cost and schedule estimate for control system-related capital and maintenance projects.
 </li>
 <li>
 Supervises the efficient and safe implementation of preventive maintenance schedules. Includes determining priorities, allocating manpower and equipment/tools, and ensures the timely completion of jobs according to schedule and work permits.
 </li>
 <li>
 Coordinates efforts within the section to develop guidelines, specifications, best practices, and procedures for maintenance of Distributed Control System, Emergency Shut Down system, Programmable Logic Controllers, and complex control loops.
 </li>
 <li>
 Maintains technical expertise in functional areas of process control systems and cybersecurity.
 </li>
 <li>
 Reviews recommended modifications or projects, studies the technical feasibility and gives recommendations on standardization of materials and compatible equipment. Participates in defining and listing spare parts for such projects, as well as pre-commissioning and commissioning.
 </li>
 <li>
 Develops IDP of staff within the section, prepares On the Job Training (OJT) programs, and monitors their implementation.
 </li>
 </ul>
 
 Lead development of control system training task books, standard operating and maintenance procedures
 
 
 
 
 
 
 Education requirements
 
 
 
 Minimum qualification required is a college graduate degree in Electrical Engineering or equivalent
 
 
 
 Language requirements
 
 
 
 Excellent knowledge of written, read, and spoken English (required)
 
 
 
 Background and experience
 
 
 
 
 Competencies and skills
 
 
 <ul>
 <li>
 
 Engineer:
 
 5-8 years of relevant experience.
 
 
 </li>
 <li>
 
 Senior Engineer:
 
 8+ years of relevant experience
 </li>
 </ul>
 
 
 
 
 
 Both:
 
 
 <ul>
 <li>
 Knowledge of personal computer applications such as SAP, Project management tools, PDF writer.
 </li>
 <li>
 Knowledge of latest International Standards related to Instrumentation Engineering (ISA, IEC, API, MPMS, ANSI, NFPA, and NAMUR).
 </li>
 <li>
 Knowledge of Engineering Software like SmartPlant Instrumentation (SPI) Flowcal /Intools for Instrumentations Engineer.
 </li>
 <li>
 Strong knowledge of Control valve sizing &amp; selection, Field instrumentation (flow, level, temperature, Special Instruments), Flow calculations, Control philosophy, safeguarding system requirements, etc.,
 </li>
 <li>
 Experience in System design of DCS/ESD/FGS/PLC and review of associated system Logics
 </li>
 <li>
 Knowledge of SCADA system
 </li>
 <li>
 Knowledge of personal computer applications such as SAP, Project management tools, PDF writer.
 </li>
 <li>
 Experience in handling FEED/EPC Contracts
 </li>
 <li>
 Knowledgeable in HSE plans related to construction/project activities.
 </li>
 <li>
 Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals.
 </li>
 <li>
 Supervisory skills.
 </li>
 <li>
 Strong Communication skill verbal and written
 </li>
 <li>
 Personal and Team Accountability
 </li>
 <li>
 Acute Observation / Inspection skills
 </li>
 <li>
 Accurate Reporting skills
 </li>
 <li>
 Effective planning and organizing skills
 </li>
 <li>
 Problem Solving Skills
 </li>
 <li>
 Result orientation
 </li>
 <li>
 Planning and Organizing
 </li>
 <li>
 Decisiveness
 </li>
 <li>
 Exercising influence
 </li>
 <li>
 Demonstrated ability to cooperate with and influence peers
 </li>
 <li>
 Proficient at interpreting Technical Drawings
 </li>
 <li>
 SOP interpretation
 </li>
 <li>
 Knowledge of engineering best practices
 </li>
 <li>
 Refinery commissioning and start-up.
 </li>
 </ul>
 
 
</div>

Snr / Eng Instrument & Control

<div>
 
 Graduate Engineer(Mechanical/Civil/Electrical/Process/Instrumentation &amp; Control)
 
 
 
 As part of Penspen&rsquo;s strategic initiative to strengthen the UAE&rsquo;s national talent pool, we are seeking fresh Engineering Graduates from Process, Civil, Mechanical, Instrument and Electrical disciplines to be based in Abu Dhabi
 
 
 
 Who Are We
 
 
 
 Penspen is a leading energy services company, providing engineering, project management, asset management and integrity services to the energy industry worldwide for over 65+ years. Originally founded in the UK in 1954 as Spencer &amp; Partners, the company has now grown to include almost 1,000 members of staff, with major offices in London, Mexico, Colombia Houston and Abu Dhabi. (https://www.penspen.com)
 
 
 
 Main Purpose Of Role
 
 
 
 Discipline Engineering role to provide support to the engineering team on projects and within the business as required.
 
 
 
 During The Training, The Graduate Will Learn
 
 
 
 <ul>
 <li>
 The basic of engineering
 </li>
 <li>
 Familiarize with international codes, standards and engineering practices
 </li>
 <li>
 Learn all the aspects of design from concept of design from concept to detailed design
 </li>
 <li>
 Learn to prepare non-critical engineering design documents
 
 
 </li>
 </ul>
 
 Candidate To Have
 
 
 
 <ul>
 <li>
 Should have completed bachelor's degree in engineering
 </li>
 <li>
 Specialization in relevant Engineering
 </li>
 <li>
 Should have a learning mindset and willingness to work with multi-cultural team
 </li>
 <li>
 Knowledge of basic engineering processes
 
 
 </li>
 </ul>
</div>

Graduate Engineer (Mechanical/Civil/Electrical/Process/I&C) UAE National

Worley

<div>
 
 Building on our past. Ready for the future
 
 
 
 Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We&rsquo;re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.
 
 
 
 Key Responsibilities
 
 
 
 <ul>
 <li>
 Supports adherence to accepted engineering and design practices, regulatory requirements, and customer specifications.
 </li>
 <li>
 Supports the standardization of equipment specifications, drawings, and document templates.
 </li>
 <li>
 Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful.
 </li>
 <li>
 Uses local/global standards to support technical excellence.
 </li>
 <li>
 Supports checking, peer reviews, and incorporation of comments and findings.
 </li>
 <li>
 Deliver Instrumentation &amp; Control discipline specific design and drafting services that meet Worley, the client&rsquo;s and applicable statutory and regulatory requirements
 </li>
 <li>
 Apply recognised offshore / onshore engineering practices applicable to Instrumentation &amp; Control design engineering.
 </li>
 <li>
 Perform discipline specific design and drafting services such as:
 </li>
 <ul>
 <li>
 ensure the project scope is clear and that changes to scope comply with project change management processes;
 </li>
 <li>
 if required, participate in studies and analyses and recommend actions;
 </li>
 <li>
 prepare engineering drawings and documentation;
 </li>
 <li>
 ensure all drawings and documents are checked in accordance with Worley checking procedures; and participate in project reviews as required.
 
 </li>
 </ul>
 </ul>
 
 Quality Assurance
 
 
 
 <ul>
 <li>
 Work within the provisions and guidelines of the Quality Assurance systems.
 
 
 </li>
 </ul>
 
 Safety
 
 
 
 <ul>
 <li>
 Responsible for personal safety and working within the Occupational Health &amp; Safety procedures.
 </li>
 <li>
 Competent in implementing HSE in the design process, focuses on process safety and strives to use best practice
 
 
 </li>
 </ul>
 
 Education &ndash; Qualifications, Accreditation, Training
 
 
 
 <ul>
 <li>
 Diploma, Advance Diploma of Engineering Technology in Instrumentation &amp; Control discipline
 
 
 </li>
 </ul>
 
 Industry Specific Experience
 
 
 
 <ul>
 <li>
 Vast experience years project experience in Design and engineering of Instrumentation &amp; Control equipments
 </li>
 <li>
 Must have experience in Offshore projects, AutoCAD, 10 to 12 years experience, Detailed Design, As-builts
 </li>
 <li>
 Preferable skills - AVEVA
 
 
 </li>
 </ul>
 
 Moving forward together
 
 
 
 We&rsquo;re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.
 
 
 We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.
 
 
 And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.
 
 
 Whatever your ambition, there&rsquo;s a path for you here. And there&rsquo;s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.
</div>

Senior Instrumentation Designer

Duke Energy

<div>Important Application Submission Information
In order to ensure your application is successfully received before the job posting expires, please submit your application by 11:59 PM on Tuesday, April 28, 2026<h2 class="jobSectionHeader">
More than a career - a chance to make a difference in people's lives.</h2>
Build an exciting, rewarding career with us &ndash; help us make a difference for millions of people every day. Consider joining the Duke Energy team, where you'll find a friendly work environment, opportunities for growth and development, recognition for your work, and competitive pay and benefits.<h1 class="jobSectionHeader">
&ldquo;Depending upon the desired qualifications of the successful applicant, the hiring manager may elect to fill this position at a higher level within the job hierarchy&rdquo;</h1>
Job Summary
Engineer I is the entry level of the Engineering classification hierarchy. Employees at this level solve problems in engineering areas of specialization with close supervision. Incumbents are expected to develop skills, and the ability to work with greater independence. They have knowledge of fundamental concepts and procedures.
Engineer II is the intermediate level of the Engineering classification hierarchy. Employees at this level solve more complex problems in engineering areas of specialization with general supervision. Incumbents are expected to develop advanced skills and the ability to work with greater independence. They effectively apply fundamental concepts and procedures to work that is complex and varied
This job is an Engineer for the Instrumentation &amp; Control (I&amp;C) Design Engineering group at the Oconee Nuclear Plant in Seneca, SC. The nuclear industry is a key component that provides generation with no emissions and is vital to clean energy transformation.
The individual will perform design engineering work for electrical and I&amp;C projects within the engineering organization. The I&amp;C engineering work will include digital and software focused items. Current qualification at a nuclear utility as a Modification Engineer under an INPO Accredited Program and knowledge of Nuclear Asset Suite for design and work order development is highly desirable.
Experience in Operations department is considered desirable as well. Individuals will be required to obtain qualifications for a Modification Engineer prior to working independently.
Selected individuals will act as the Lead Technical and/or Responsible Engineer for assigned projects and in a support capacity for other project teams.
Responsibilities will include design package development, developing conceptual designs and specifications for bidding purposes, evaluating alternatives, technical support during implementation, setpoint development, coordination of design efforts with selected vendors/AEs/designers and conducting design package reviews. A working knowledge or familiarity of cyber security regulations as mandated by the Nuclear Regulatory Commission (NRC) is required as digital designs need to be cyber security compliant. Design products related to major digital controls system replacements, software evaluations, instrument component upgrades, and control circuits are expected to be developed.
Individual will be required to qualify in the necessary duty areas to act independently as a Responsible Engineer for modifications within Duke Energy with past qualifications and product demonstration from other utilities being useful to accelerate this process. Individuals will also be required to support the emergency response organization and storm response in support of the utility and to meet the needs of our clients and the community. Lastly, the individual will be expected to exhibit sound technical judgment and guidance to the project team. The position will be filled commensurate with education and experience.
Responsibilities:<ul><li>
Provides engineering/technical expertise and guidance in the identification, analysis, and resolution of issues identified to be resolved by the Engineering Change process</li><li>
Responsible Engineers serve as single point of contact for any support needed through Design, Planning or Implementation for their projects.</li><li>
Prepare thorough and accurate design documentation such as calculations, drawings and other documents associated with assigned projects.</li><li>
Possesses knowledge of fundamental concepts, practices, and procedures.</li><li>
Develops positive working relationships to effectively coordinate work activities. Demonstrates effective oral and written communication skills. Maintains accurate records and files.</li><li>
Supports the company's goals and represents the company positively and professionally.</li></ul>
Working Conditions:<ul><li>
Hybrid Office/Remote Work Environment &ndash; Classified as a hybrid position, on site will be required through initial on boarding and qualification</li><li>
Flexible work schedule - typically four 10-hour days, 2 in office and 2 remote</li><li>
Some travel to other Duke sites, industry sites, and industry conferences/meetings</li><li>
Occasional off-hour emergent work required to support plant outages and emergent problems.</li></ul>
Basic/Required Qualifications:
Nuclear Engineer I<ul><li>
Graduation from a four-year college or university with a Bachelor of Science in Engineering (Not Technology) from an ABET accredited program. A master&rsquo;s degree in engineering from an ABET accredited school will be considered in lieu of the B.S. engineering degree.</li><li>
Ability to obtain and maintain unescorted access to a nuclear facility (General Employee Training, Radiation Worker Training, Security Clearance checks and subject to the site&rsquo;s Fitness for Duty Program)</li><li>
Strong oral / written communication skills within a professional environment</li><li>
Skilled in the practices of researching engineering and design issues, evaluating alternatives, making sound recommendations and preparing and presenting recommendations.</li><li>
Must be able to work in a team environment</li></ul>
Nuclear Engineer II<ul><li>
Graduation from a four-year college or university with a Bachelor of Science in Engineering (Not Technology) from an ABET accredited program. A master&rsquo;s degree in engineering from an ABET accredited school will be considered in lieu of the B.S. engineering degree.</li><li>
2+ years Nuclear or related engineering experience</li><li>
Ability to obtain and maintain unescorted access to a nuclear facility (General Employee Training, Radiation Worker Training, Security Clearance checks and subject to the site&rsquo;s Fitness for Duty Program)</li><li>
Strong oral / written communication skills within a professional environment</li><li>
Skilled in the practices of researching engineering and design issues, evaluating alternatives, making sound recommendations and preparing and presenting recommendations.</li><li>
Must be able to work in a team environment</li></ul>
Desired Requirements:<ul><li>
BS degree in Electrical Engineering or Computer Engineering</li><li>
Passed Fundamentals of Engineering exam</li><li>
Experience in digital hardware / software modifications</li><li>
Working knowledge of digital upgrade specific licensing requirements and current 10CFR73.54 Cyber Security Requirements</li><li>
Experience developing digital / software modification test plans</li><li>
Experience in the 10CFR50.59 with respect to designing modifications to a nuclear facility.</li></ul>
Other job specific requirements:<ul><li>
Nuclear Plant unescorted access</li><li>
This position may be required to have Emergency Response Organization (ERO) responsibilities which could include callouts with a defined response time to the site and an on-call duty rotation requiring the employee to be Fit for Duty.</li><li>
Required to wear personal protective equipment (hard hat, safety glasses, fall protection, etc.) as needed.</li><li>
Occasional overnight travel. (5-10%)</li></ul>
Travel Requirements
5-15%<h3 class="jobSectionHeader">
Relocation Assistance Provided (as applicable)</h3>
Yes<h3 class="jobSectionHeader">
Represented/Union Position</h3>
No<h3 class="jobSectionHeader">
Visa Sponsored Position</h3>
No<h3 class="jobSectionHeader">
Please note that in order to be considered for this position, you must possess all of the basic/required qualifications.</h3>
Privacy
Do Not Sell My Personal Information (CA)
Terms of Use
Accessibility</div>

Engineer I / II – CDE ONS I&C

Servtech Technical Services llc

Technical Sales Engineer &ndash; InstrumentationDepartment: Instrumentation &amp; Control Employment Type: Full-Time Industry: Oil &amp; Gas | Power | Water | Industrial | EPCJob SummaryWe are looking for a results-driven Sales Engineer &ndash; Instrumentation to generate new business, manage client relationships, and achieve sales targets for instrumentation products, calibration services, and service contracts.Key Responsibilities<ul><li>Develop new business opportunities and acquire clients</li><li>Promote instrumentation products, calibration, and service contracts</li><li>Prepare quotations, proposals, and technical offers</li><li>Negotiate contracts and close sales</li><li>Conduct regular client visits and maintain CRM records</li><li>Coordinate with technical teams for accurate solutions and timely delivery</li><li>Achieve assigned sales targets and ensure payment collection</li></ul>Requirements<ul><li>Bachelor&rsquo;s Degree in Instrumentation, Electrical, or related Engineering field</li><li>0-1 years of sales experience in instrumentation or industrial services</li><li>Strong technical understanding of instrumentation products</li><li>Excellent communication and negotiation skills</li><li>Ability to work independently and meet targets</li></ul>Apply now to join a growing team in the Instrumentation &amp; Control industry.Job Type: Full-timeWork Location: In person

Technical Sales Engineer

Search 10000+ Instrumentation & control engineer jobs near you this April. New roles added regularly across leading industries. Apply today.