hvac technician

electrical engineer

electrical technician

ac technician

mechanical engineer

instrumentation engineering technician

Candidzone

Technician &ndash; Instrumentationduration 6months extendable projectQualifications &amp; Skills:<ul><li>ITI / Diploma in Instrumentation, Electronics, or Electrical Engineering.</li><li>2&ndash;4 years of hands-on experience in instrumentation installation, maintenance, or calibration.</li><li>Familiar with HART protocol, analog/digital signals, 4-20 mA loops, and PLC systems.</li><li>Proficient in using testing equipment: calibrators, multimeters, loop testers.</li><li>Basic knowledge of DCS /PLC control logic (Siemens, ABB, Yokogawa, etc.).</li><li>Safety-conscious with understanding of site safety procedures.</li><li>Good documentation and communication skills.</li><li>Must have Valid Qatar id</li></ul>To Apply: Email id :- c.caren@candidzone.netWhatsapp Caren +97430662111Job Types: Full-time, Temporary

Hiring Now :- Technician - Instrumentation

Mindstream

To lead and manage all instrumentation and control engineering activities for oil and gas projects, ensuring compliance with industry standards, client specifications, and project requirements within budget and schedule constraints.Key Responsibilities:<ul><li>Lead the instrumentation discipline in FEED, detailed engineering, and EPC projects.</li><li>Prepare, review, and approve engineering deliverables including:</li><li>Instrument index, I/O lists</li><li>Data sheets, specifications, and material requisitions</li><li>Instrument layouts, hook-up drawings, cable routing</li><li>Control narratives and logic diagrams</li><li>Ensure compliance with international codes and standards (ISA, IEC, API, ANSI).</li><li>Develop and review P&amp;IDs, instrument selection, and control system architecture.</li><li>Define project scope for instrumentation deliverables and estimate man-hours.</li><li>Plan and allocate resources for instrumentation engineering tasks.</li><li>Monitor project progress and report status to the project manager.</li><li>Ensure adherence to schedule, quality, and cost requirements.</li><li>Prepare technical material requisitions for instruments, control systems, and packages.</li><li>Review vendor documents and ensure compliance with project requirements.</li><li>Interface with other disciplines and collaborate with construction, commissioning, and procurement teams.</li><li>Support site activities and resolve technical queries.</li><li>Implement QA/QC requirements for instrumentation deliverables.</li><li>Participate in HAZID, HAZOP, SIL, ALARP and support risk assessments and design reviews.</li></ul>Qualifications &amp; Experience:<ul><li>Bachelor&rsquo;s Degree in Instrumentation / Electronics Engineering or equivalent</li><li>Minimum 15 years of experience in instrumentation engineering for oil &amp; gas projects, including FEED and EPC phases</li><li>At least 5 years in a lead role managing teams</li><li>Experience with DCS/PLC/SCADA systems and instrumentation for onshore/offshore oil &amp; gas facilities</li><li>Strong knowledge of international design codes and standards (ISA, IEC, API)</li></ul>Job Type: Full-timeApplication Question(s):<ul><li>How many years of experience do you have in Instrumentation Engineering for Oil &amp; Gas projects?</li><li>Do you have experience in BROWNFIELD O&amp;G projects?</li><li>Have you worked in FEED and EPC phases?</li><li>Do you have experience leading a team of engineers?</li><li>Are you proficient in DCS/PLC/SCADA systems?</li><li>Are you familiar with international instrumentation codes and standards (ISA, IEC, API, ANSI)?</li><li>Do you have experience preparing/reviewing Instrument Index, I/O Lists, Datasheets, Hook-up drawings, and Control Narratives?</li><li>What is your current and expected salary? Notice period?</li></ul>

Lead Instrumentation Engineer

TDGISERV Qatar

<ul><li>Receives and reviews incoming work requests for maintenance to Fire Alarm system, Building Management System, Access Control System, Chiller Management System, PLC /SCADA based controlled equipment&rsquo;s, pressure, temperature, flow recording and analyzing instrumentation, Audio Visual System, and other low voltage equipment&rsquo;s.</li><li>Executes the work requests and allocates work to subordinates and contractors. Ensures that all the completed work conforms to established work standards and statutory requirements.</li><li>Participates in the commissioning of new projects. He reviews drawings evaluate systems, snags completed projects and assists in the generation of all relevant work reports.</li><li>Carries out the complex installation repair and maintenance of all the electronic and instrumentation systems in the premises. He uses proper tools and test equipment. He carries out function tests on the repairs carried out prior to reinstating the systems.</li><li>Assists to carry out routine and preventive maintenance.</li><li>Assists in commissioning activity related to new projects.</li><li>Inspects the work and resolves problems during work, trains subordinates in safe practices and guidelines.</li><li>Assists in the maintenance of records and files of work performed, in progress, and work completed. Assists in the completion of timesheets, material costs, repairs and activity reports.</li><li>Assists in the preparation of annual lists of spare parts, consumable materials and special tools or test equipment. Reviews consumption, discusses interchangeability with his supervisor.</li><li>Assists in the receipt of the new material and spare parts through on-site inspection of delivered material</li><li>Certificate Diploma in Instrumentation, Electronics Computer applications.</li><li>At least 6 years of working experience in the installation, maintenance, repair, and calibration of a wide range of electronic equipment.</li><li>He must have an aptitude &amp; experience in Programmable Logic Controls, Fire Alarm systems, BMS systems, Chiller control, conventional and PROFIBUS-based instrumentation.</li><li>should be available in Doha for face to face interview</li><li>on transferable visa with NOC</li></ul>Job Types: Full-time, PermanentPay: QAR1,800.00 - QAR2,200.00 per month

INSTRUMENTATION TECHNICIAN

Aguas de Valencia

PURPOSE:Responsible for the design, installation, calibration, operation, troubleshooting, and maintenance of instrumentation and control systems across wastewater treatment facilities, package plants, and pumping stations. Ensure continuous and reliable process monitoring and automation to meet operational efficiency, compliance, and safety standards.ROLES &amp; RESPOSIBILITIES :&middot; Provide technical support to instrument team to resolve complex obstacles.&middot; Prepare technical documents and reports.&middot; Ascertain that preventive and corrective maintenance is carried out in accordance with the plan.&middot; Maintain a spares inventory balance to ensure the reliability of instruments.&middot; Organize regular maintenance schedules assigning job to the work force.&middot; Immediate response to equipment failures repairing or arranging for the installation of replacements.&middot; Provide technical training to team members.&middot; Data Analysis (current and historical) and Root Cause Analysis.&middot; Reporting incidents that present or have the potential to represent a loss to the organization. These include occupational injuries / illness, security, environmental incidents and product and severe non-conformances, to prevent recurrences.&middot; Carry out other tasks assigned.Experience:&middot; Minimum 7 years of experience in the operations and maintenance of wastewater treatment plants and pumping stations.Competencies: &middot; Demonstrated professional experience in the Instrumentation and Controls (I&amp;C) field performing design work.&middot; Field experience inspecting newly installed control systems for conformity with contract documents and specifications.&middot; Experience in testing, troubleshooting, and rectifying problems which arise during construction, installation, commissioning, and start up, such as: design, wiring, configuration, and application programming issues.&middot; Experience in programming major brands of PLC or HMI product and field startup experience, testing, and troubleshooting.&middot; Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.&middot; Computer and Mechanical proficiency.&middot; Planning&middot; Conceptual skills&middot; Problem solving&middot; Attention to detailsEducation: Degree in Engineering in Electrical, Mechanical, Instrumentation, Industrial, or similar experienceOthers: UPDA Certified Engineer / to obtain this yearLanguage: English (written and verbal communication)Job Type: Full-timePay: From QAR1.00 per monthApplication Question(s):<ul><li>Your current location: </li><li>Are you willing to relocate to Qatar? </li><li>Joining Period: </li><li>Can you obtain &quot;NOC&quot;/transfer approval? (Only for Qatar Residents)</li><li>Do you have Qatar Driving License?</li><li>Monthly Current Salary in QAR (Full Package):</li><li>Monthly Expected Salary in QAR (Full Package):</li></ul>

INSTRUMENTATION AND CONTROL ENGINEER

Wood

<div>
 
 Job Description
 
 
 
 
 Remarkable people, trusted by clients to design and advance the world
 
 
 
 Wood are actively seeking Expressions of Interest for
 
 Instrument &amp; Control Engineer
 
 role to support future growth in our expanding business.
 
 
 The projects team focusing on delivering across FEED, Pre-FEED, Brownfield, Greenfield scopes of work. In this role, you will be responsible for the execution of project work in accordance with the project execution plan, including Wood and/or Project Procedures on Safety and Quality Control within the man-hour, cost and the project schedule targets.
 
 
 This is a long-term assignment based in Qatar.
 
 
 
 Responsibilities
 
 
 
 
 Designing the future. Transforming the world
 
 
 
 Reflecting The Market Focus For The Office In Both Brownfield And Green Field Opportunities, Multi-skilled Personnel Are Sought, In Particular Those With Experience In
 
 
 Onshore Oil and Gas
 
 
 Offshore Oil and Gas
 
 
 
 What We Can Offer
 
 
 
 <ul>
 <li>
 Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors
 </li>
 <li>
 Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice
 </li>
 <li>
 Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market
 </li>
 <li>
 Life Insurance; Provides payment of 2 x Base Salary (up to a maximum of QAR 1 million) upon death
 </li>
 <li>
 End of Service Gratuity; In line with Qatar Labor Law, upon completion of 1 years&rsquo; service employees are eligible for an End of Service benefit of three weeks for every year of service.
 </li>
 <li>
 Medical Insurance: Ensures cover (up to a maximum of QAR 250,000 per person, per year) is available should you require treatment. Pre-existing and/or chronic conditions are covered up to QAR 10,000.
 </li>
 <li>
 Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.
 </li>
 <li>
 Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.
 </li>
 <li>
 Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession
 
 
 </li>
 </ul>
 
 Responsibilities
 
 
 
 <ul>
 <li>
 Ensures Wood and Client Health, Safety, Environmental and Quality procedures are followed and that a high standard of safety is achieved in all associated work
 </li>
 <li>
 Produces and reviews C&amp;I deliverables with guidance from the Lead Engineer, ensuring accuracy and alignment with the scope of work prior to issue. Such deliverables including but not limited to the following:
 </li>
 <ul>
 <li>
 The design basis, instrument schedules/index, sizing calculations and instrument datasheets (control valve, relief valves, flow / pressure / level instruments, cable, etc), Control &amp; Shutdown System Philosophies, etc.
 </li>
 <li>
 Preparation and development of enquiry packages including Specifications, Datasheets, Request for Quotation and Technical Bid Evaluation.
 </li>
 </ul>
 <li>
 Develop specification and prepare material requisitions for control systems, instruments, control valves and all other instruments
 </li>
 <li>
 Supports development and provides instrumentation and control input for P&amp;IDs and Cause &amp; Effects
 </li>
 <li>
 Review Vendors&rsquo; quotations prepare technical quotation evaluation and recommend the final technically acceptable Vendor, in conjunction with Materials Management Department commercial quotation evaluation. Technically approve Order Variation Summaries
 </li>
 <li>
 Participate in coordination meetings and engineering review meetings with Vendors of major equipment as required
 </li>
 <li>
 Prepares and develops material take off for the I&amp;C discipline
 </li>
 <li>
 Takes responsibility for challenging I&amp;C engineering tasks and capable of delivering scope for an area on large and/or complex projects
 </li>
 <li>
 Participates in project reviews, design reviews, audits and other workshops as required
 </li>
 <li>
 Completion of site surveys and data gathering for brownfield scope of work, taking responsibility for development of the site survey report
 </li>
 <li>
 Assess progress and procedure associated reports and input to the progress measurement system. Derive and suggest plans to recover slippage, correct inefficiency and to take any resulting agreed actions
 </li>
 <li>
 Remain up to date with the latest technical developments in your fields of expertise
 </li>
 <li>
 Takes a proactive approach to personal &amp; professional development
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 What makes you remarkable?
 
 
 
 At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world&rsquo;s most critical challenges.
 
 
 
 Experience
 
 
 
 <ul>
 <li>
 Engineering Degree in Instrumentation &amp; Control, Electrical &amp; Electronics Engineering or similar with a minimum of 7 years of relevant experience
 </li>
 <li>
 Enrolled on the Register of Engineers in the State of Qatar, Grade A or B Category as a mandatory requirement
 </li>
 <li>
 If not enrolled on the Register of Engineers in the State of Qatar, then candidates must be a Chartered Engineer
 </li>
 <li>
 T&Uuml;V Function Safety Certification is desirable
 </li>
 <li>
 Further education and experience with Cyber Security Systems is desirable
 </li>
 <li>
 Proven core Instrument &amp; Control Engineering skills, including design experience in the Oil &amp; Gas sector
 </li>
 <li>
 Experience of working in a variety of projects and phases, including greenfield and brownfield, on and offshore, Pre-FEED through to EPC, with a focus on offshore upstream.
 </li>
 <li>
 Familiar with third party control system architecture and design including Honeywell, Yokogawa, Emerson, Invensys, Siemens and ABB for example
 </li>
 <li>
 Familiar with and competent with PAS, DCS, SCADA and PLC control system design including fieldbus technologies and the various communication protocols
 </li>
 <li>
 Experience with ESD, F&amp;G and Condition Monitoring Systems design
 </li>
 <li>
 Experienced with completing SIL assessments, SIL verification, and SIS architecture design
 </li>
 <li>
 Experience and knowledge of Telecoms engineering and design is desirable, including an awareness of relevant international design codes and standards such as IA/TIA and ETSI
 </li>
 <li>
 Experience with Telecoms systems such as LAN, CCTV, PA/GA, UHF/VHF Radio, Microwave and Access Control for example is desirable
 </li>
 <li>
 Strong understanding of plant design and field instrumentation / control room layout
 </li>
 <li>
 Understanding and use of SPI (INTOOLS)
 </li>
 <li>
 Experienced and well versed with HAZOP / SIL / LOPA, capable of representing the discipline as the technical authority in such studies
 </li>
 <li>
 Familiar with and experience in the application of international design codes and standards such as ISA, NFPA, BS, API, IEC, NACE, NEMA, ANSI, etc
 </li>
 <li>
 Ideally has experience with Qatar O&amp;G customer design standards including Shell DEPs
 </li>
 <li>
 Experience with management of vendors, able to complete Technical Bid Evaluations and oversee development of vendor scope
 </li>
 <li>
 Experience completing factory acceptance tests for a range of instrumentation and control systems is desirable
 </li>
 <li>
 Construction and site experience is desirable, with exposure to loop checking, installation and problem solving of transmitters, pressure switches, level switches, control valves, F&amp;G detectors, flow meters and MOVs
 </li>
 <li>
 A self-motivated, proactive individual with high achievement drive and initiative, excellent verbal and written communication skills and good organisational awareness
 </li>
 <li>
 Ability to impact and influence fellow workers
 </li>
 <li>
 Display analytical and innovation skills to manage new technology
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people. www.woodplc.com
 
 
 
 Diversity Statement
 
 
 
 We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.
</div>

Instrumentation & Controls Engineer

JOB HUB GLOBAL

Job Title: Senior CAD Technician- Electrical and Instrumentation Location: C Ring Road Function / Business Unit: Engineering Working Days: Sunday to Thursday Salary: 6, 000.00-7,000.00 (Full Package)Our client a leading global engineering and project management organization in Qatar is looking to hire a Senior CAD Technician to join its dynamic Engineering team. The role involves transforming initial rough product designs into comprehensive working documents using CAD tools. You will compile and draft construction plans, review and check the work of junior technicians, and ensure accuracy and adherence to project standards.This position requires strong technical expertise, leadership capabilities, and attention to detail in delivering high-quality drawings and engineering documentation.Key Responsibilities<ul><li>Analyze and adhere to project CAD standards.</li><li>Plan and deliver all drawings required for project submission and handover.</li><li>Prepare accurate CAD drawings from sketches or markups.</li><li>Produce field sketches when required.</li><li>Draft complex electrical, instrumentation, and mechanical services drawings.</li><li>Review, check, and evaluate the work of drafting technicians.</li><li>Ensure compliance with departmental/project procedures for drawing management, change control, and revision control.</li><li>Liaise with engineers and team members to clarify design ambiguities.</li><li>Work with various drawing/model formats (2D/3D).</li><li>Perform self-checks and peer checks to ensure accuracy and reduce rework.</li><li>Configure and operate plotting equipment, prepare plot files, and finalize drawings.</li><li>Participate in technical and project meetings as required.</li><li>Enhance technical drafting knowledge and mentor junior staff.</li><li>Undertake other duties as reasonably required by the company.</li></ul>Qualifications &amp; Experience<ul><li>Diploma in Engineering Technology (any discipline) OR Trade Certification in a relevant discipline (ITI).</li><li>Proficiency with AutoCAD, MicroStation, SmartSketch or similar 2D drafting tools.</li><li>Exposure to 3D modeling/drawing development (desirable).</li><li>5&ndash;7 years of relevant work experience, including at least 2 years leading drafting teams in a project environment.</li></ul>Skills &amp; Competencies<ul><li>Strong technical drafting skills with high attention to detail.</li><li>Knowledge of engineering design standards and drawing conventions.</li><li>Ability to supervise, check, and guide the work of junior CAD staff.</li><li>Excellent organizational and time management skills.</li><li>Effective communication and teamwork abilities.</li></ul>Please note that applicants should answer the pre-screening questions to be considered for this positionTHOSE WHO CAN JOIN IMMEDIATELY SHOULD APPLY. REGRETTABLY ONLY SHORTLISTED CANDIDATES WILL BE CONTACTEDAbout Job Hub GlobalAt Job Hub Global, we believe that people are at the heart of every great organization. As a premier HR consultancy, we are passionate about helping businesses thrive by providing bespoke recruitment, staff outsourcing, workforce solutions, and HR management consultancy services that are tailored to meet your unique needs.With a deep understanding of the evolving workplace, we are committed to connecting exceptional talent with exceptional companies. Our mission is to empower businesses with the right people, processes, and strategies to drive success. Whether you&rsquo;re looking to build a high-performing team, streamline your workforce, or navigate the complexities of HR management, Job Hub Global is here to partner with you every step of the way.Together, we&rsquo;ll turn challenges into opportunities and dreams into achievements. Your success is our businessJob Types: Full-time, Contract Contract length: 6 monthsPay: QAR6,500.00 - QAR7,500.00 per monthApplication Question(s):<ul><li>Which CAD software are you most proficient in? (AutoCAD, MicroStation, SmartSketch, Other &ndash; please specify)</li><li>Have you led or supervised other drafting staff in a project environment? If yes, how many years?</li><li>Do you accept the full salary package that is on offer in the job description?</li><li>Are you available to join immediately with valid QID and NOC?</li><li>Do you have experience in Electrical and Instrumentation Draughfting? If yes how many years ?</li></ul>Application Deadline: 29/08/2025

Senior CAD Technician-Electrical and Instrumentation

Swan Global WLL

We Are Hiring: Instrument TechnicianLocation: DukhanDuty: 10 Hours per day, 6 Days per weekSalary: QAR 4,000 + Free Food, Accommodation &amp; TransportDuration: 3 Months (extendable)Visa: Freelance visa holders onlyKey Responsibilities:* Perform installation, calibration, testing, and maintenance of field instruments.* Support troubleshooting, loop checking, and commissioning activities.* Ensure all work is carried out safely and as per project standards.Requirements:* Diploma/ITI in Instrumentation or related field.* 4&ndash;7 years of instrumentation experience (Oil &amp; Gas / EPC preferred).* Strong knowledge of calibration, control systems, and field instruments.* Gulf experience is mandatory.Apply via WhatsApp: +974 5087 2661Job Type: Contract Contract length: 3 monthsPay: QAR3,000.00 - QAR4,000.00 per monthApplication Question(s):<ul><li>Do you have freelance visa, Because we are not looking for visa transfer for short term 3 months &amp; Ext project.</li></ul>

Instrument Technician-Dukhan

Explore 1024+ Instrumentation engineering technician in Doha this September. Find roles across top companies and apply now to boost your career.