mechanical construction engineer

Spectech Qatar

Position: Mechanical Construction Engineer ( Offshore)Location: Offshore &ndash; QatarDuration: 6+ Months ContractVacancy: 1 No.Experience Required:Minimum 10+ years in Offshore Oil &amp; Gas projectsStrong experience in Execution / Site SurveyPiping &amp; Structural construction experience (Mandatory)WhatsApp : +974 7735 1212Job Type: Full-timePay: QAR6,000.00 - QAR7,000.00 per month

Mechanical Construction Engineer

Reliance Industries Limited

<div>
 
 Job Accountabilities
 
 
 
 <ul>
 <li>
 Working out scope estimation from the available drawings and datas from engineering BMTO or Initial cost estimation and prepare SOQ for raising service PR.
 </li>
 <li>
 Single point responsibility for Site related activities.
 </li>
 <li>
 Execution of MOC construction job as per the EPC schedule.
 </li>
 <li>
 Preparation of monthly / weekly plans with the available material, manpower and resources.
 </li>
 <li>
 Ensure work procedures being followed.
 </li>
 <li>
 Ensure the Job Work safety at site in line to site specific safety procedures.
 </li>
 <li>
 Must be well aware of Safe Work Permit Procedure as well as job and plant specific hazards. Should be able to carry out general as well as specific Risk Assessment.
 </li>
 <li>
 Estimate P&amp;M requirement and coordinate with P&amp;M department for timely availability at site.
 </li>
 <li>
 Ensure the Job Work safety at site in line to site specific safety procedures.
 </li>
 <li>
 Ensure mobilization of required manpower by contractor and inform Construction Manager in case of shortage for follow up.
 </li>
 <li>
 Ensure the optimum utilization of P&amp;M and Free Issue Materials (FIMs).
 </li>
 <li>
 Ensure Issue of MIN of required materials for execution of job as per set targets. Timely release of weekly/monthly material plan.
 </li>
 <li>
 Workout the Field and Shop spool fabrication requirement of piping Jobs constructing constructability, ease of execution and safety.
 </li>
 <li>
 Workout the structure shop fabrication and field erection sequence considering minimum hot work at site.
 </li>
 <li>
 Establish the proper working channel between workshop pre fabrication and Field execution of the job as per the Job priority.
 </li>
 <li>
 Loop file Mechanical clearance &amp; Handover.
 </li>
 <li>
 Certification of RA bills.
 </li>
 <li>
 Ensure compliance of ITPs required for various stages of piping/structure fabrication job completion.
 </li>
 <li>
 Co-ordinate with Project Planner for regular communication of accurate site progress and holds if any.
 </li>
 <li>
 Co-ordinate with other stake holders like O&amp;M, Civil, Instrumentation, Inspection and electrical for site construction activities.
 </li>
 <li>
 Timely raise the SERs in consultation with Lead and obtain any waivers from concern departments as per SER procedure.
 
 
 </li>
 </ul>
 
 Skills Required (Knowledge And Skills)
 
 
 
 <ul>
 <li>
 Construction management for Brown field projects.
 </li>
 <li>
 Knowledge in various stages of construction execution process.
 </li>
 <li>
 Ability to plan construction resources as per project execution plan.
 </li>
 <li>
 Through Knowledge of Engineering drawings and specification of the job being executed.
 </li>
 <li>
 Knowledge in piping codes such as ASME 31.3 and API.
 </li>
 <li>
 Knowledge of Insulation and Blasting &amp; Painting.
 </li>
 <li>
 Well aware for Construction manpower productivity norms.
 </li>
 <li>
 Ability to handle 2-3 medium scale project construction simultaneously.
 </li>
 <li>
 Well aware for the Plant specific hazards and handle the Engineers and Contract manpower accordingly.
 </li>
 <li>
 Basic knowledge of the metallurgy of the different types of materials used in process industry and their limitations.
 </li>
 <li>
 Basic knowledge in reading of P&amp;ID, Isometrics and site construction related documents.
 </li>
 <li>
 Knowledge in UG piping procedures and activities like external / internal coatings, CP, trenching, sand bedding etc.
 </li>
 <li>
 Well aware of Rigging plans and lifting schemes. Ability make lifting plans.
 </li>
 <li>
 Organizing, Conflict resolution and coordinating skill
 </li>
 <li>
 Analytical thinking ability for planning and decision making.
 
 
 </li>
 </ul>
 
 Educational Qualifications
 
 
 
 Bachelors degree in Mechanical Engineering.( Full Time ) / Diploma in Mechanical Engineering with 4 to 10 years of experience
</div>

MPC Mechanical Construction Engineer

Dar Al Riyadh

<div>We are seeking a highly experienced Mechanical Site Engineer with a minimum of 10 years of expertise in Mechanical Site Engineer (CS) projects. The successful candidate will play a crucial role in overseeing mechanical engineering activities on-site, ensuring compliance with project specifications, and contributing to the successful execution of diverse projects. 
Responsibilities:
<ul><li>Provide on-site supervision and technical guidance for mechanical engineering activities.
</li><li>Collaborate with contractors to ensure the proper installation and functioning of mechanical systems.
</li><li>Implement and enforce rigorous quality control processes to ensure the integrity of mechanical installations.
</li><li>Conduct regular inspections to verify compliance with approved plans and industry standards.
</li><li>Assist in the resolution of technical issues related to mechanical engineering during construction.
</li><li>Conduct site visits to monitor and assess mechanical construction activities.
</li><li>Ensure that mechanical designs comply with approved plans, local codes, and industry standards.
</li><li>Collaborate with design teams to address any discrepancies and changes.
</li><li>Monitor and enforce safety standards related to mechanical construction activities.
</li><li>Identify and address safety hazards on-site.
</li><li>Act as a point of contact for clients regarding mechanical engineering matters on-site.
</li><li>Provide timely responses to client inquiries and concerns.
</li><li>Provide technical support to project teams and contractors on mechanical engineering issues.
</li><li>Collaborate with engineering disciplines to ensure coordinated project delivery.
</li><li>Establish and maintain accurate records of mechanical engineering activities on-site.
</li><li>Ensure proper documentation of as-built conditions and changes.
</li><li>Stay updated on industry best practices and emerging technologies in mechanical engineering.
</li>Recommend improvements to enhance the efficiency and quality of mechanical construction. 
<li>
</li></ul>Minimum Requirements:
<ul><li>Bachelor's degree in Mechanical Engineering.
</li><li>Minimum of 10 years of experience as a Site Mechanical Engineer in CS projects.
</li><li>Strong knowledge of mechanical engineering principles, codes, and standards.
</li><li>Excellent site supervision and communication skills.
</li><li>Proficient in mechanical design software and tools.
</li><li>Bilingual proficiency in English and Arabic (both written and spoken).
</li><li>Professional engineering license (PE) or relevant certifications.
</li><li>Experience in managing mechanical engineering activities for CS projects within the Middle East region.</li></ul></div>

Mechanical Site Engineer

KEO International Consultants

The Mechanical Engineer will be responsible for providing on-site supervision and technical support for all Mechanical engineering aspects of the project. This includes ensuring compliance with all relevant codes, standards, and contract specifications.
Responsibilities
<ul>
<li>Oversee the design and implementation of Mechanical systems.</li>
<li>Ensure compliance with all applicable codes, standards, and regulations in the country where the project is located.</li>
<li>Review and approve mechnical shop drawings and material submittal from contractors and subcontractors to ensure they meet project specifications and quality standards.</li>
<li>Conduct regular site inspections to monitor the progress of electrical works and ensure adherence to approved plans and schedules.</li>
<li>Inspect and test mechanical installations at various stages of construction.</li>
<li>Investigate and resolve any mechanical-related issues or defects that arise during construction, including coordination with contractors to rectify any deficiencies.</li>
<li>Prepare and maintain detailed records of all mechanical inspections, tests, and non-conformances. This documentation will be crucial for project tracking, quality control, and potential future reference.</li>
<li>Ensure the safety of all mechanical work on site. This includes implementing and enforcing safety protocols, conducting regular safety inspections, and addressing any safety hazards identified.</li>
<li>Provide technical support and guidance to the construction team on all mechanical-related matters. This may include answering technical questions, resolving design conflicts, and assisting with the interpretation of mechanical drawings and specifications.</li>
</ul>

Mechanical Engineer

Wood

<div>We are looking for a seasoned Lead Mechanical Engineer with a strong background in construction and installation of heavy mechanical equipment. The ideal candidate will be responsible for developing Installation, Construction, and Maintenance Material Handling Reports , with a focus on both greenfield and brownfield modifications . The role requires a deep understanding of equipment installation, structural integration, and maintenance access planning.</div>
 <div><div>Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people. www.woodplc.com 
</div><div></div> 
<div>Diversity Statement
</div><div>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</div></div>
 <div><ul><li>Bachelor&rsquo;s degree in Mechanical Engineering or related discipline.
</li><li>15&ndash;20 years of experience in mechanical construction, installation, and maintenance within large-scale industrial projects.
</li><li>Proven experience in brownfield modifications and integration with existing facilities.
</li><li>Strong knowledge of structural assessments, pipe rack loading, and PFP systems.
</li><li>Proficiency in preparing technical documentation, lifting plans, and method statements.
</li><li>Familiarity with international standards and best practices in mechanical construction and safety.
</li><li>Excellent leadership, communication, and coordination skills.</li></ul></div>
 <div>Key Responsibilities:
<ul><li>Lead the planning and execution of installation and construction activities for major mechanical equipment including:
<ul><li>Compressors
</li><li>Package Boilers
</li><li>STG
</li><li>Large Columns and Vessels
</li><li>Acid Gas Blowers
</li><li>HRSG Packages
</li><li>Flares and Incinerators
</li><li>Large Bore Valves
</li></ul></li><li>Prepare detailed Material Handling Reports , including lifting studies, rigging plans, and equipment access strategies.
</li><li>Evaluate and design crane access and standing areas for installation and maintenance operations.
</li><li>Assess and validate pipe rack strength and structural adequacy for supporting new loads during brownfield modifications.
</li><li>Develop and review installation and maintenance strategies for integration with existing facilities, ensuring minimal disruption to ongoing operations.
</li><li>Coordinate with structural, piping, and civil teams to ensure compatibility of new installations with existing infrastructure.
</li><li>Provide input on Passive Fire Protection (PFP) requirements for existing structures and ensure compliance with safety standards.
</li><li>Participate in 3D Model and constructability reviews and provide technical solutions for complex installation challenges.
</li><li>Ensure all activities comply with project specifications, industry codes (ASME, API, etc.), and HSE standards.
</li></ul>Mentor junior engineers and provide technical leadership across multidisciplinary teams.</div>

Lead Mechanical Engineer – Construction Material Handling

Al Nasiya

All Mechanical Engineering works related to maintenance and construction fieldJob Type: Full-timePay: AED5,000.00 - AED8,000.00 per monthEducation:<ul><li>Bachelor's (Preferred)</li></ul>Experience:<ul><li>Mechanical Engineering: 4 years (Preferred)</li></ul>License/Certification:<ul><li>UAE Drivers License (Required)</li></ul>

MECHANICAL ENGINEER

MAP Vision General Contracting L L C

Job Title: Mechanical EngineerLocation: Abu Dhabi,United Arab Emirates Experience: Minimum 5 years (UAE experience required) Industry: Construction / Contracting Availability: Immediately available candidates preferred Salary Range: AED 6,000 &ndash; 10,000 per monthJob Description:We are seeking an experienced Mechanical Engineer to join our construction/contracting team in the UAE. The ideal candidate will have solid hands-on experience in mechanical systems, site supervision, and project execution within the construction industry.Requirements:<ul><li>Bachelor&rsquo;s Degree in Mechanical Engineering or equivalent.</li><li>Minimum 5 years of relevant UAE experience in a construction or contracting company.</li><li>Strong knowledge of HVAC, plumbing, and firefighting systems.</li><li>Proven ability to manage site work and coordinate with subcontractors and consultants.</li><li>Excellent communication and project management skills.</li><li>Must be immediately available to join.</li></ul>Salary:AED 6,000 &ndash; 10,000 (depending on experience and qualifications)Job Type: Full-timePay: AED6,000.00 - AED10,000.00 per monthApplication Question(s):<ul><li>Visa Status?</li><li>Current Salary?</li><li>Expected Salary?</li><li>Expecting Joining Date?</li></ul>Education:<ul><li>Bachelor's (Preferred)</li></ul>Experience:<ul><li>Mechanical Engineer: 5 years (Preferred)</li><li>Contracting Company: 5 years (Preferred)</li></ul>License/Certification:<ul><li>UAE Driving License (Preferred)</li></ul>Location:<ul><li>Abu Dhabi (Preferred)</li></ul>

Hiring - Mechanical Engineer

Search 10000+ Mechanical construction engineer jobs near you this November. New roles added regularly across leading industries. Apply today.