natural gas plant technician

Meranti Green Steel

<div>
 
 Purpose / Mission:
 
 
 
 Serve as the owner's technical authority on the Direct Reduction (DR) process for the 2.5 Mtpa green Direct Reduced Iron (DRI) / Hot Briquetted Iron (HBI) plant in Duqm, Oman. Lead all aspects of process engineering, technology licensor interface, process safety, and technical assurance from pre-FID through FEED, EPC award, construction, commissioning and early operations. Provide experienced operational judgement on the systems and safety protocols required for a gas-based reduction plant transitioning to hydrogen.
 
 
 
 Key Responsibilities:
 
 
 
 <ul>
 <li>
 Own the process flow diagrams, mass and energy balances, and process control philosophy for the DR plant and associated HBI briquetting facilities.
 </li>
 <li>
 Lead the technical interface with the process technology licensor, including battery limit definition, operating envelope, reducing gas specification, and performance guarantees.
 </li>
 <li>
 Lead process input to the hydrogen ramp-up strategy, including transition planning from natural gas to a hydrogen-enriched reducing gas mix.
 </li>
 <li>
 Lead and contribute to process safety studies including HAZID, HAZOP, SIL assessment, and process hazard analysis, with particular attention to the hazards associated with reducing gas, natural gas and hydrogen systems.
 </li>
 <li>
 Review and approve process engineering deliverables from the Owner's Engineer and EPC contractors.
 </li>
 <li>
 Support commercial negotiations with utility providers by providing the technical basis for gas, hydrogen, power and water consumption profiles under nominal, ramp-up and turndown conditions.
 </li>
 <li>
 Support cost estimate development for process scope to FID-level accuracy.
 </li>
 <li>
 Provide process technical leadership during construction, pre-commissioning, commissioning and performance testing.
 </li>
 <li>
 Lead process operational readiness preparation, including operating philosophy, procedures, and training requirements, in close coordination with the future operations organization.
 </li>
 <li>
 Contribute to the development and mentoring of process engineering resources as the in-country team grows from pre-FID into execution.
 
 
 </li>
 </ul>
 
 Requirements / Skills / Experience:
 
 
 
 <ul>
 <li>
 Minimum 20 years' experience in process engineering with direct experience on gas-based Direct Reduction plants. Equivalent experience on ammonia, methanol, syngas, hydrogen or analogous reduction process plants will be considered.
 </li>
 <li>
 Proven experience in a senior process role through at least one full lifecycle of a DR or analogous plant: FEED, EPC, construction, commissioning and operations.
 </li>
 <li>
 Deep knowledge of gas-based DR process systems, reducing gas chemistry, shaft furnace operation, reformer systems (as relevant), and associated safety protocols.
 </li>
 <li>
 Exposure to hydrogen-enriched or hydrogen-based direct reduction is a strong advantage.
 </li>
 <li>
 Demonstrated leadership in process safety, including accountability for HAZOP, SIL and process hazard analysis outcomes.
 </li>
 <li>
 Strong command of process simulation and mass/energy balance tools.
 </li>
 <li>
 Experience managing technology licensor interfaces and negotiating process guarantees.
 </li>
 <li>
 Prior GCC or Middle East project experience preferred.
 </li>
 <li>
 Demonstrated ability to hold an independent professional position with licensors, contractors and senior executives when process integrity requires it.
 </li>
 <li>
 Strong communication, technical writing and review skills.
 
 
 </li>
 </ul>
 
 Required Education / Qualification / Training:
 
 
 
 <ul>
 <li>
 Bachelor's degree in Chemical, Metallurgical, or Process Engineering (required).
 </li>
 <li>
 Master's degree in Chemical, Metallurgical or Process Engineering (preferred).
 </li>
 <li>
 Chartered Engineer, Professional Engineer or equivalent internationally recognized professional status (preferred).
 </li>
 <li>
 Member of a recognized professional engineering institution (e.g. IChemE, AIChE, AIST) (preferred).
 
 
 </li>
 </ul>
 
 Required Language Proficiency:
 
 
 
 English - Fluent
 
 
 Arabic - Nice to have
</div>

Senior Process Engineer

Tomorrow RNG

<div>About Tomorrow RNG:
Tomorrow RNG is a renewable natural gas (RNG) producer focused on reducing emissions and creating a greener future. With cutting-edge facilities and a dedicated team of over 125 professionals, we seamlessly integrate the RNG value chain to ensure excellence for our landfill partners and the communities we serve. Guided by values of integrity and sustainability, Tomorrow RNG is backed by Enbridge's 175+ year pedigree in the natural gas industry, delivering top-tier assets that exceed customer and partner expectations.
Job Summary:
Plant Operator is responsible for independent operation and maintenance of a RNG processing plant. This includes but not limited to compression, treating facilities including solvent regeneration, CO2 extraction, gas dehydration, condensate and product storage, truck loading, electrical generation, and other facilities and associated activities. All duties performed must follow safety guidelines and have a safety-first mindset. The Plant Operator carries out directions of the Plant Manager to ensure optimum plant performance and environmental compliance. Work will involve vigorous outdoor activities in ALL weather conditions. 
**You must live within 45 minutes of assigned site/area (Melissa, Tx) to be considered for this position.**
Responsibilities:<div><ul><li>
Learn and follow basic operating procedures for plant operations.</li><li>
Prepare morning reports, daily logs, and conduct daily plant walk-throughs.</li><li>
Develop basic knowledge of plant treating processes, including location and function of each step.</li><li>
Perform routine maintenance (e.g., changing filters, greasing bearings, valve maintenance)</li><li>
Understand and follow lockout/tagout procedures.</li><li>
With supervision, isolation and de-energize equipment.</li><li>
Gain general knowledge of plant procedures and SOPs.</li><li>
Assist in plant maintenance work as required.</li><li>
Communicate with vendors (e.g., water disposal, oil deliveries)</li></ul></div><ul><li>
Adhere to safety practices, use PPE, identify hazards, and address safety concerns respectfully.</li><li>
Ensure accurate and timely updates to the maintenance log.</li><li>
Communicate effectively with all teams on location to identify issues and contribute to increasing gas flow from the field.</li><li>
Assist in various tasks during upset conditions, including supporting maintenance techs, field techs, construction activities, and plant operations.</li><li>
Maintain housekeeping standards (clean &amp; clear of clutter) in shop, storage, and UTV areas.</li><li>
Comply with all applicable safety and environmental regulations.</li><li>
Follow established field/plant maintenance procedures and design standards.</li><li>
Participate in:<ul><li>
Ongoing training and education.</li><li>
Peer-to-peer training and knowledge sharing.</li><li>
Innovation and continuous improvement initiatives</li></ul></li></ul>
Qualifications:<div><ul><li>
Fundamentals of working with computers and navigating Microsoft applications</li><li>
Ability to multitask and be self-directed.</li><li>
No previous experience is required.</li><li>
Training provided in custom applications (flow computers, gas chromatograph, plant controls, process safety management)</li></ul></div>
Preferred Qualifications:<div><ul><li>
RNG/Landfill experience</li><li>
Mechanically inclined</li><li>
Process plant operations experience</li></ul></div>
Requirements:<div><ul><li>
Willingness to be trained in reading P&amp;IDs, plant safety procedures, and documentation</li><li>
Strong work ethic, reliability, and dedication to team success.</li><li>
Must be at least 18 years of age.</li><li>
Must have a high school diploma or equivalent.</li><li>
Must have a valid driver's license with a clean driving record.</li><li>
Must clear background check and drug test.</li><li>
The ability to communicate effectively.</li><li>
The ability to be punctual, dependable, and willing to work long hours if needed is required.</li><li>
The ability to lift up to 50 pounds frequently.</li><li>
Must have good manual dexterity with physical ability to work extended hours, climbing, bending, kneeling, working with arms extended above the head, twisting upper body, standing for long periods. This includes walking catwalks, working in confined spaces, exposure to extreme weather conditions, lifting, driving a vehicle, and operation of light industrial equipment.</li><li>
The ability to do physical labor and other strenuous physical tasks in extreme weather conditions.</li><li>
The ability to work week days and weekends.</li><li>
The ability to work overtime and respond to callouts during off hours.</li><li>
The ability to respond in a timely manner to any emergency.</li></ul>
Work Environment &amp; Travel</div>
Schedule/Shift:<div><ul><li>
Overtime required based on operational needs</li><li>
On-call availability may be required</li><li>
Typical shifts: 10&ndash;12 hours (may include overnight)</li><li>
Rotating shifts, including weekends and holidays</li></ul></div>
Benefits: Benefits:<div><ul><li>
401(k)</li><li>
Health, Dental &amp; Vision Insurance</li><li>
Life Insurance</li><li>
PTO</li></ul></div>
Supplemental pay :<div><ul><li>
Bonus Pay</li></ul></div></div>

Landfill Gas Plant Operator -$20/hr (1206)

360 HR Partners

Electrical Technician &ndash; Power PlantLocation: SharjahWe&rsquo;re hiring an Electrical Technician / Junior Engineer for a leading power generation facility in Sharjah. This role is ideal for candidates with solid hands-on experience in combined cycle power plants.Key Requirements:<ul><li>Diploma in Electrical Engineering</li><li>3&ndash;5 years of experience in CCGT power plants</li><li>Strong experience in electrical maintenance within power plants</li><li>Exposure to GE H-class / F-class gas turbines is an added advantage</li></ul>Key Responsibilities:<ul><li>Perform maintenance and troubleshooting of electrical systems and equipment including generators, transformers, switchgear, MCCs, control panels, and cabling systems</li><li>Support maintenance of gas turbines, steam turbines, HRSGs, and associated auxiliaries from an electrical standpoint</li><li>Handle plant systems such as cooling, water treatment, and utility systems</li><li>Ensure compliance with safety standards and electrical regulations</li></ul>What&rsquo;s on Offer:<ul><li>Permanent position</li><li>Stable career in a high-performance power plant environment</li><li>Exposure to advanced power generation technologies</li></ul>Job Type: PermanentPay: AED5,000.00 - AED7,000.00 per monthApplication Question(s):<ul><li>Do you have GE H-class / F-class gas turbines Exp?</li></ul>Experience:<ul><li>Combined Cycle Gas Turbines: 2 years (Required)</li></ul>Work Location: In person

Electrical Technician- CCGT

Mechanical Technician &ndash; Power Plant (Permanent Role)Location: SharjahWe&rsquo;re hiring a Mechanical Technician / Junior Engineer for a leading power generation facility in Sharjah. If you have hands-on experience in combined cycle power plants, this is a strong opportunity to grow in a stable, long-term role.Key Requirements:<ul><li>Diploma in Mechanical Engineering</li><li>3&ndash;5 years of experience in CCGT power plants</li><li>Experience in maintenance of mechanical equipment in power plants</li><li>Exposure to GE H-class / F-class gas turbines is a strong advantage</li></ul>Key Responsibilities:<ul><li>Perform maintenance and troubleshooting of mechanical equipment including gas turbines, steam turbines, pumps, fans, boilers, compressors, HRSGs, valves, and heat exchangers</li><li>Handle systems such as cooling, water treatment, wastewater treatment, and storage tanks</li><li>Support upkeep of plant utilities, civil structures, and associated systems</li><li>Ensure adherence to safety and operational standards</li></ul>What&rsquo;s on Offer:<ul><li>Permanent position</li><li>Stable career in a high-performance power plant environment</li><li>Opportunity to work on advanced turbine technologies</li></ul>Job Type: PermanentPay: AED5,000.00 - AED7,000.00 per monthApplication Question(s):<ul><li>Do you have GE H-class / F-class gas turbines Experience?</li></ul>Experience:<ul><li>Combined Cycle Gas Turbines (CCGT): 2 years (Required)</li></ul>Work Location: In person

Mechanical Technician- CCGT

<div>Title:
Senior Manager- Construction
&quot;Belong, Connect, Grow, with KBR!
The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.
KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.&quot;
KBR is looking for Senior Manager- Construction to be based in&ndash; Abu Dhabi UAE
Summary: The ideal candidate would be an experienced Engineer with formal qualifications and would have the following key skills:<ul><li>
Should have experience in installing feed gas compressor to deliver gas to the desired operating parameters (mainly desired pressure).</li><li>
Should have experience in Liquefaction and fractionation of Natural Gas (LNG).</li><li>
Experience in Integrating Nitrogen Rejection Unit.</li><li>
Fuel Gas system.</li><li>
Import power from national grid.</li><li>
Air Cooling system.</li><li>
Instrument / Plant Air Systems.</li><li>
Fire Water system.</li><li>
Desalinated water plant.</li><li>
Should have EPC experience in a Large LNG plant.</li></ul>
Anticipated Roles and Responsibilities<ul><li>
Bachelor&rsquo;s Degree IN Civil Engineering</li><li>
20 years or more experience in the Oil &amp; Gas industry</li><li>
A minimum of 10 years&rsquo; experience as a Construction Manager in the Oil &amp; Gas Projects.</li><li>
At least 5 years&rsquo; experience working as a Construction Manager in the Middle East Countries</li><li>
SMP Construction Manager or Deputy Construction Manager experience required.</li><li>
Civil and E&amp;I experience is an advantage.</li><li>
Prefer global EPC Contractor or Sub-Contractor experience.</li><li>
Having leadership quality to manage all indirect and direct manpower on site and deliver the planned progress.</li><li>
Excellent verbal and written communication skills (English)</li></ul><div>
Experiences, Qualifications requirements</div><ul><li>
Bachelor&rsquo;s Degree IN Civil Engineering</li><li>
Minimum 20+ years work experience in in the Oil &amp; Gas Industry</li></ul>
Interested and suitable candidates who are matching the above criteria please apply for the role. Suitable candidates will be contacted directly.</div>

Senior Manager- Construction

ABIS

<div>ABIS is seeking a competent Site Mechanical Engineer specialized in Shutdown and Turnaround projects to join our team. The successful candidate will oversee mechanical operations during scheduled shutdowns and turnaround activities, ensuring work is completed safely, efficiently, and meets quality standards. You will coordinate with various teams, monitor mechanical system performance, inspect equipment, and provide technical support to guarantee seamless execution of critical maintenance activities. This challenging role requires proactive problem-solving and strong leadership to manage onsite mechanical engineering tasks in high-pressure environments.
Responsibilities<ul><li>
Plan, supervise, and execute mechanical engineering tasks during shutdown and turnaround projects.</li><li>
Coordinate with contractors, subcontractors, and other engineering disciplines to ensure smooth workflow.</li><li>
Conduct inspections and quality checks on mechanical equipment and systems.</li><li>
Ensure compliance with safety standards, project specifications, and regulatory requirements.</li><li>
Provide technical expertise and troubleshooting support to resolve mechanical issues on site.</li><li>
Prepare progress reports, documentation, and communicate with project stakeholders regularly.</li><li>
Assist in resource planning and allocation to meet project timelines.</li></ul> 

Requirements 
<ul><li>
Bachelor&rsquo;s degree in Mechanical Engineering or related field.</li><li>
Proven 5+ experience in mechanical engineering roles within shutdown and turnaround projects.</li><li>
Strong knowledge of mechanical systems, maintenance, and repair methodologies.</li><li>
Excellent organizational, communication, and leadership skills.</li><li>
Ability to work under pressure and meet tight deadlines.</li><li>
Familiarity with safety regulations and quality control standards.</li></ul></div>

Site Mechanical Engineer ( Shutdown / Turnaround) for Oil & Gas / Relevant

Global Startegic Services

We are seeking an experienced Rotating Equipment Technician with hands-on experience in maintenance, troubleshooting, and reliability support for critical rotating equipment in plant operations.Key Responsibilities<ul><li>Perform maintenance, troubleshooting, and repair of rotating equipment</li><li>Support plant reliability and ensure equipment performance standards</li><li>Carry out inspections and preventive maintenance activities</li><li>Conduct root cause analysis for equipment failures</li><li>Ensure compliance with QA/QC and engineering standards</li><li>Work closely with operations and maintenance teams</li></ul>Requirements<ul><li>Associate Diploma in Mechanical Engineering (Bachelor&rsquo;s preferred)</li><li>Additional certifications in Rotating Equipment is an advantage</li><li>Minimum 15+ years of relevant experience in Oil &amp; Gas / Petrochemical / Energy sector</li><li>Strong hands-on field experience in rotating equipment maintenance like Pumps, Compressors (process &amp; gas), Gas turbines, Gearboxes (high &amp; low speed), Fans and blowers, Expanders, Electric motors &amp; associated mechanical systems and tools.</li><li>Knowledge of root cause analysis (RCA)</li><li>Familiarity with SAP or similar CMMS systems and MS Office</li><li>Familiarity with standards from QatarEnergy / Shell</li><li>Strong English communication skills (written &amp; spoken) and teamwork skills</li><li>Must have a valid Qatar driving license or attain a DL in the near future</li><li>Must be available for immediate joining</li></ul>Location: Mesaieed, QatarJob Type: Full-timePay: From QAR1.00 per monthWork Location: In person

Rotating Equipment Technician – Oil & Gas

Search 7933+ Natural gas plant technician jobs near you this May. New roles added regularly across leading industries. Apply today.