optical systems engineer

Bhoomi Process Management Pvt. Ltd

Position Title: Senior Optics Engineer Qualification: B.Tech / M.Tech / PhD in Optics, Photonics, Physics, Electrical Engineering or related field with excellent academic record Experience: 4&ndash;6 YearsRole Overview:We are seeking a highly skilled Senior Optics Engineer with hands-on experience in IR, UV &amp; Visible spectrum optical system design, simulation, and prototyping. The ideal candidate should have strong expertise in Zemax/OpticStudio, optical component selection, system performance optimization, and light-matter interaction.Roles &amp; Responsibilities:<ul><li>Optical Design &amp; Simulation: Design and optimize optical systems operating in Infrared (IR), Ultraviolet (UV), and Visible wavelengths. Perform ray tracing, tolerance analysis, illumination design, and stray-light analysis using Zemax/OpticStudio.</li><li>Prototyping &amp; Validation: Build and test optical prototypes, perform optical alignment of assemblies, and verify system performance. Conduct experiments for detector characterization, source modulation, and signal-to-noise ratio (SNR) measurement.</li><li>Spectral Analysis &amp; Component Selection: Select appropriate IR/UV sources, detectors, filters, lenses, and optical coatings. Analyze material absorption, scattering behavior, and thermal effects on optical performance.</li><li>Documentation &amp; Compliance: Prepare detailed optical design documents, test plans, and alignment procedures. Ensure compliance with relevant optical safety and regulatory standards.</li><li>Internal Collaboration: Work closely with electronics, mechanical, and firmware teams to integrate optical subsystems into complete instruments.</li></ul>Required Skills &amp; Experience:<ul><li>4&ndash;6 years of hands-on experience in optical design, sensing, photometry, or instrumentation.</li><li>Strong expertise in Zemax/OpticStudio for optical modeling and optimization.</li><li>In-depth understanding of IR, UV, and Visible optics, sources, and detectors.</li><li>Experience with optical alignment techniques and laboratory measurement equipment.</li></ul>Preferred Qualifications:<ul><li>Experience working with NDIR analyzers, UV analyzers, spectroscopy systems, or optical sensors.</li><li>Knowledge of CAD tools and scripting or data analysis using MATLAB or Python.</li></ul>Job Types: Full-time, PermanentPay: ₹45,000.00 - ₹75,000.00 per monthBenefits:<ul><li>Provident Fund</li></ul>Education:<ul><li>Bachelor's (Required)</li></ul>Experience:<ul><li>optical design, sensing, photometry, or instrumentation: 4 years (Required)</li><li>Zemax/OpticStudio for optical modeling and optimization.: 4 years (Required)</li><li>IR, UV, and Visible optics, sources, and detectors: 4 years (Required)</li><li>optical techniques,laboratory measurement equipment.: 4 years (Required)</li><li>NDIR analyzers, UV analyzers, spectroscopy, optical sensors: 4 years (Required)</li></ul>Location:<ul><li>Mulund West, Maharashtra (Required)</li></ul>Willingness to travel:<ul><li>100% (Required)</li></ul>Work Location: In person

Optics Design Engineer

BOEING

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.The Boeing PAC-3 program is seeking a highly skilled and experienced Lead Systems Engineer (LSE) to join our Gimbal Assembly Integrated Product Team (IPT) in Huntsville, AL. As the LSE for the Gimbal IPT, you will work closely with a multidisciplinary team of engineers to ensure the successful design and manufacturing of the Gimbal to meet the performance, reliability, and safety requirements of the seeker system. The LSE will be responsible for development and adherence of the Gimbal requirements and the interfaces of the Gimbal with the rest of the Seeker system.Boeing Defense, Space & Security (BDS) Patriot Advanced Capability (PAC-3) program is an air-defense missile system designed to counter tactical ballistic missiles, cruise missiles, and advanced aircraft where Boeing is the original engineering manufacturer of the seeker. The PAC-3 program is producing seekers everyday as well as developing a new design of the seeker. The seekers provide active data to the PAC-3 missile which enables it to acquire, intercept and destroy threats using hit-to-kill technology. The PAC-3 Seeker team is a cross functional, highly skilled, motivated group embracing the beliefs that focused safety, execution, LEAN manufacturing and business practices will secure our future and well-being, driving our product to be the seeker of choice for the PAC-3 program and future generations of weapon systems.Position Responsibilities:<ul><li>Ensure compliance with system requirements and specifications of the design and development of the Gimbal subsystem for the PAC-3 missile seeker</li><li>Collaborate with cross-functional teams, including electrical, mechanical, and software engineers, to integrate the Gimbal assembly into the overall missile seeker system</li><li>Define and document the gimbal's architecture, interfaces, and operational characteristics</li><li>Ensure compliance with relevant industry standards, regulations, and safety guidelines in the design and implementation of the Gimbal assembly</li><li>Designs or develops, maintains, and identifies improvements for the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes</li><li>Support test plans and procedure development to verify the functionality and performance of the gimbal subsystem</li><li>Support the troubleshooting and resolution of any technical issues or anomalies related to the gimbal during development, integration, manufacturing, and testing phases</li><li>Provide technical guidance and mentorship to junior engineers working on the gimbal subsystem</li><li>Collaborate with project managers to establish project schedules, milestones, and deliverables related to the gimbal</li><li>Stay updated with the latest advancements in gimbal assembly technologies, industry trends, and best practices, and apply this knowledge to enhance the performance and capabilities of our missile seeker system</li></ul>This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location.This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active).Basic Qualifications (Required Skills/Experience):<ul><li>Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry</li><li>5+ years' proven system engineering experience including architecture and interface development and definition and requirement derivation</li><li>Proven experience in design and development of gimbal assemblies for missile seekers or similar precision tracking systems</li><li>Familiarity with industry standards and regulations related to missile seeker systems</li><li>Experience coordinating across multidisciplinary engineering teams</li></ul>Preferred Qualifications (Desired Skills/Experience):<ul><li>Strong knowledge of mechanical design principles, control systems, and electro-optical technologies relevant to gimbal assemblies</li><li>Proficiency in using engineering software tools for modeling, simulation, and analysis (e.g., CAD, FEA, MATLAB, etc.)</li><li>Knowledge of manufacturing processes and techniques for precision mechanical components</li><li>Excellent problem-solving skills and the ability to analyze complex systems and troubleshoot technical issues</li><li>Experience mentoring early career engineers</li></ul>Relocation:Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.Shift:This is a 1st shift position.Drug-Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $119,850 - $162,150 Applications for this position will be accepted until Nov. 04, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent RequiredRelocation Relocation assistance is not a negotiable benefit for this position.Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shift Equal Opportunity Employer:Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Lead Systems Engineer - Gimbal Integrated Product Team

10xengineers

FPGA Design Engineer &ndash; Imaging SystemsExperience Level: 3+ years Location: Lahore, on-site Job Type: Full-TimeAbout the roleWe&rsquo;re seeking an experienced FPGA Design Engineer to develop high-performance, low-latency imaging systems across various domains, including broadcast video, medical imaging, and machine vision.The ideal candidate brings deep expertise in Xilinx and Intel/Altera FPGAs, strong RTL development, and solid experience with both bare-metal firmware and Linux-based embedded systems.What You&rsquo;ll Do<ul><li>Develop and optimize FPGA designs for image acquisition, video processing, and sensor interfacing.</li><li>Implement RTL (Verilog/VHDL/SystemVerilog) using Vivado/Vitis (Xilinx) and Quartus Prime (Intel).</li><li>Integrate high-speed interfaces: MIPI CSI, HDMI, LVDS, SDI, PCIe, etc.</li><li>Design AXI/Avalon-based systems and real-time video pipelines.</li><li>Build and customize PetaLinux environments (BSP, kernel, U-Boot, device tree).</li><li>Interface with ARM/MicroBlaze/Nios II processors in SoC designs.</li><li>Collaborate with software, hardware, and systems teams for full system integration and validation.</li></ul>What We&rsquo;re Looking For<ul><li>3+ years in FPGA development for imaging or embedded systems.</li><li>Hands-on with Xilinx (Zynq, Ultrascale+) and Intel (Cyclone, Arria) platforms.</li><li>Strong RTL, timing closure, and hardware debugging (ILA, SignalTap, ModelSim).</li><li>Experience with PetaLinux, bare-metal firmware, and embedded Linux integration.</li><li>Scripting and automation (TCL, Python, Bash) for build flows and testing.</li><li>Familiarity with real-time constraints and image processing pipelines.</li></ul>Culture and Core Value TraitsExceptional work ethic, willingness to learn, tenacity not to quit, aptitude to surpass, and strong desire to work in a fast-paced environment with existing and new algorithms are necessary to excel in this role.<ul><li>Self-driven and self-starter, in addition to excellent communication skills.</li><li>Great at thinking outside the box and have an aptitude for innovation and problem solving.</li><li>Interact appropriately with others to maintain a positive and productive work environment.</li><li>Always willing to explore the other side of fear, be challenged, and crave cutting edge technologies.</li><li>Maintain a regular and predictable work schedule.</li></ul>Job Type: Full-timeWork Location: In person

FPGA Design Engineer – Imaging Systems

Infogain

<div>ROLES &amp; RESPONSIBILITIES
<div>Role Description:
Infogain has an exciting opportunity to join our network infrastructure teams as an Optical Network Deployment Engineer working on Backbone Network capacity deployment. This role will be focused on network deployment (IP, optical), and network operations (decommissioning, retrofitting, capacity upgrades, migrations, etc.) We are looking for individuals with experience in routing/switching, deployment, optical, and leadership experience. This is a fast-paced environment, and we are looking for someone who is organized, can multi-task and enjoys working in a team environment.
Responsibilities:
Configuration, build, roll-out and testing of new DWDM line systems deployments, calibration, verification, BERT, etc.
Deployment and commissioning of Optical devices such as Ciena and Infinera in new PoPs and Datacenter builds.
Develop C update documentation, work cross functionally to develop and enhance network design C production workflows.
Analyze data to diagnose and identify root causes to network and tooling issues.
Analyze and improve efficiency, scalability, and stability of various system resources.
Oualifications/Skills:
Ciena 6500 knowledge and experience is required
pre-screening focus on supporting &ldquo;optical devices specific migrations in Datacenters or POP sites
Ciena and/or Infinera certifications or equivalent experience is highly desirable.
Expert working knowledge on DWDM components such as ROADM, Mux/Demux, Amplifiers, Transponders. Channel creation, optimization.
Experience in Chassis installation, line cards installs PCR&rsquo;s and structure fiber installation
Experience in device installation and testing, software/firmware upgrade, re-bootstrapping and decommission.
Experience in network optimization (re-stripes, migrations, upgrades, swaps, capacity upgrades). Creating Bill of Materials and JSN&rsquo;s, (Job Start Notification) for deployments and upgrades.
Excellent experience in maintaining documentation and teamwork.
Excellent troubleshooting and communication skills.
CCNA/JNCIA or equivalent knowledge.
Strong knowledge of TCP/IP
Strong understanding and preferably hands own experience in commonly used routing protocols (OSPF, BGP, MPLS)
Multivendor testing and support experience.
Demonstrated ability to analyze complex situations and utilize troubleshooting skills, systems and tools, and creative problem-solving abilities under pressure.
Solid understanding and configuration experience of Channel builds and cross-connect builds.
Good knowledge on DWDM testing methods and tools.
Solid understanding of fiber-optic technology including cable types, connector types, optic types, patch panels, and optical transport technologies.
Strong attention to detail with excellent time management and organization skills.</div>
EXPERIENCE
<ul><div>8-11 Years</div>
</ul>SKILLS
<ul><div>Primary Skill: Network Engineer</div>
<div>Sub Skill(s): Network Engineer
</div><div>Additional Skill(s): LAN, Network Operations, Firewall</div></ul></div>

Network Engineer (Lead)

<div>ROLES &amp; RESPONSIBILITIES
<div>Role Description:
Infogain has an exciting opportunity to join our network infrastructure teams as an Optical Network Deployment Engineer working on Backbone Network capacity deployment. This role will be focused on network deployment (IP, optical), and network operations (decommissioning, retrofitting, capacity upgrades, migrations, etc.) We are looking for individuals with experience in routing/switching, deployment, optical, and leadership experience. This is a fast-paced environment, and we are looking for someone who is organized, can multi-task and enjoys working in a team environment.
Responsibilities:<ul><li>Configuration, build, roll-out and testing of new DWDM line systems deployments, calibration, verification, BERT, etc.</li><li>Deployment and commissioning of Optical devices such as Ciena and Infinera in new PoPs and Datacenter builds.</li><li>Develop C update documentation, work cross functionally to develop and enhance network design C production workflows.</li><li>Analyze data to diagnose and identify root causes to network and tooling issues.</li><li>Analyze and improve efficiency, scalability, and stability of various system resources.</li></ul>
Oualifications/Skills:<ul><li>Ciena 6500 knowledge and experience is required</li><li>Ciena and/or Infinera certifications or equivalent experience is highly desirable.</li><li>Expert working knowledge on DWDM components such as ROADM, Mux/Demux, Amplifiers, Transponders. Channel creation, optimization.</li><li>Experience in Chassis installation, line cards installs PCR&rsquo;s and structure fiber installation</li><li>Experience in device installation and testing, software/firmware upgrade, re-bootstrapping and decommission.</li><li>Experience in network optimization (re-stripes, migrations, upgrades, swaps, capacity upgrades). Creating Bill of Materials and JSN&rsquo;s, (Job Start Notification) for deployments and upgrades.</li><li>Excellent experience in maintaining documentation and teamwork.</li><li>Excellent troubleshooting and communication skills.</li><li>CCNA/JNCIA or equivalent knowledge.</li></ul><ul><li> 
Strong knowledge of TCP/IP</li><li>Strong understanding and preferably hands own experience in commonly used routing protocols (OSPF, BGP, MPLS)</li><li>Multivendor testing and support experience.</li><li>Demonstrated ability to analyze complex situations and utilize troubleshooting skills, systems and tools, and creative problem-solving abilities under pressure.</li><li>Solid understanding and configuration experience of Channel builds and cross-connect builds.</li><li>Good knowledge on DWDM testing methods and tools.</li><li>Solid understanding of fiber-optic technology including cable types, connector types, optic types, patch panels, and optical transport technologies.</li><li>Strong attention to detail with excellent time management and organization skills.</li></ul></div>
EXPERIENCE
<ul><div>4.5-6 Years</div>
</ul>SKILLS
<ul><div>Primary Skill: Network Engineer</div>
<div>Sub Skill(s): Network Engineer
</div><div>Additional Skill(s): LAN, Network Operations, Firewall</div></ul></div>

Network Engineer (Standard)

<div>ROLES &amp; RESPONSIBILITIES
<div>Role Description:
Infogain has an exciting opportunity to join our network infrastructure teams as an Optical Network Deployment Engineer working on Backbone Network capacity deployment. This role will be focused on network deployment (IP, optical), and network operations (decommissioning, retrofitting, capacity upgrades, migrations, etc.) We are looking for individuals with experience in routing/switching, deployment, optical, and leadership experience. This is a fast-paced environment, and we are looking for someone who is organized, can multi-task and enjoys working in a team environment.
Responsibilities:<ul><li>Configuration, build, roll-out and testing of new DWDM line systems deployments, calibration, verification, BERT, etc.</li><li>Deployment and commissioning of Optical devices such as Ciena and Infinera in new PoPs and Datacenter builds.</li><li>Develop C update documentation, work cross functionally to develop and enhance network design C production workflows.</li><li>Analyze data to diagnose and identify root causes to network and tooling issues.</li><li>Analyze and improve efficiency, scalability, and stability of various system resources.</li></ul>
Oualifications/Skills:<ul><li>Ciena 6500 knowledge and experience is required</li><li>Ciena and/or Infinera certifications or equivalent experience is highly desirable.</li><li>Expert working knowledge on DWDM components such as ROADM, Mux/Demux, Amplifiers, Transponders. Channel creation, optimization.</li><li>Experience in Chassis installation, line cards installs PCR&rsquo;s and structure fiber installation</li><li>Experience in device installation and testing, software/firmware upgrade, re-bootstrapping and decommission.</li><li>Experience in network optimization (re-stripes, migrations, upgrades, swaps, capacity upgrades). Creating Bill of Materials and JSN&rsquo;s, (Job Start Notification) for deployments and upgrades.</li><li>Excellent experience in maintaining documentation and teamwork.</li><li>Excellent troubleshooting and communication skills.</li><li>CCNA/JNCIA or equivalent knowledge.</li></ul><ul><li> 
Strong knowledge of TCP/IP</li><li>Strong understanding and preferably hands own experience in commonly used routing protocols (OSPF, BGP, MPLS)</li><li>Multivendor testing and support experience.</li><li>Demonstrated ability to analyze complex situations and utilize troubleshooting skills, systems and tools, and creative problem-solving abilities under pressure.</li><li>Solid understanding and configuration experience of Channel builds and cross-connect builds.</li><li>Good knowledge on DWDM testing methods and tools.</li><li>Solid understanding of fiber-optic technology including cable types, connector types, optic types, patch panels, and optical transport technologies.</li><li>Strong attention to detail with excellent time management and organization skills.</li></ul></div>
EXPERIENCE
<ul><div>6-8 Years</div>
</ul>SKILLS
<ul><div>Primary Skill: Network Engineer</div>
<div>Sub Skill(s): Network Engineer
</div><div>Additional Skill(s): LAN, Network Operations, Firewall</div>
</ul>ABOUT THE COMPANY
Infogain is a human-centered digital platform and software engineering company based out of Silicon Valley. We engineer business outcomes for Fortune 500 companies and digital natives in the technology, healthcare, insurance, travel, telecom, and retail &amp; CPG industries using technologies such as cloud, microservices, automation, IoT, and artificial intelligence. We accelerate experience-led transformation in the delivery of digital platforms. Infogain is also a Microsoft (NASDAQ: MSFT) Gold Partner and Azure Expert Managed Services Provider (MSP).

Infogain, an Apax Funds portfolio company, has offices in California, Washington, Texas, the UK, the UAE, and Singapore, with delivery centers in Seattle, Houston, Austin, Krak&oacute;w, Noida, Gurgaon, Mumbai, Pune, and Bengaluru.</div>

Network Engineer (Senior)

Technology Innovation Institute

<div>
 
 
 Directed-Energy Research Center
 
 
 
 Directed-energy systems, such as microwave, laser, and acoustics represent a powerful emerging technology with new industrial and medical applications.
 
 
 
 
 
 Our Directed-Energy Research Center&rsquo;s priorities include:
 
 <ul>
 <li>
 Cutting-edge high-power electromagnetic solutions
 </li>
 <li>
 Innovative high-energy laser systems
 </li>
 <li>
 Advanced acoustic technologies
 </li>
 <li>
 Pulsed power technologies
 </li>
 <li>
 Particle beams and plasma physics
 </li>
 <li>
 Antennas and metamaterials
 </li>
 <li>
 Radar and remote-sensing technologies
 </li>
 </ul>
 
 
 
 
 
 Job Description
 
 
 
 The Directed Energy Research Center of the Technology and Innovation Institute is looking for a
 
 Senior Opto-Mechanical Engineer
 
 who will part of the laser systems engineering division contributing to the, development, and integration, across multiple projects within the High Power Lasers and Applications department.
 
 
 The job includes traveling overseas, on occasion for short periods, to participate in conferences, visits of suppliers or partners, training, etc.
 
 
 
 
 
 
 Responsibilities:
 
 
 
 Main responsibilities include:
 
 <ul>
 <li>
 Design and develop mechanical/ opto-mechanical systems and components.
 </li>
 <li>
 Design tools and fixtures supporting assembly, alignment and test of complex and precision optical systems.
 </li>
 <li>
 Perform numerical simulations with FEA tools to validate designs of mechanical, optical, and opto-mechanical systems, focusing on heat transfer, stress, strain, and vibration analyses.
 </li>
 <li>
 Conduct tolerance analysis of mechanical, optical, and opto-mechanical structures.
 </li>
 <li>
 Optimize designs according to Geometric Dimensioning and Tolerancing (GD&amp;T) standards to prepare for manufacturing, integration, and alignment stages.
 </li>
 <li>
 Integrate mechanical components and execute systems/sub-systems functional/ validation tests.
 </li>
 <li>
 Create detailed documentation that includes design specifications, engineering drawings, and system schematics.
 </li>
 <li>
 Document the outcomes of testing phases, such as prototype, functional, and compliance tests.
 </li>
 <li>
 Contribute to research papers, case studies, and industry publications, especially when involved in cutting-edge technologies or innovative mechanical engineering solutions.
 </li>
 <li>
 Write comprehensive reports on analyses conducted, such as stress tests, thermal analysis, and fluid dynamics studies.
 </li>
 <li>
 Work collaboratively with project and department team members.
 </li>
 <li>
 Support the optical and system engineering teams with opto-mechanical system design
 </li>
 <li>
 Participate in multidisciplinary discussions within the activity domain of DERC.
 </li>
 <li>
 Coach and mentor junior engineers in the design and development of opto-mechanical systems.
 </li>
 </ul>
 
 
 
 
 
 
 
 
 Requirements
 
 
 <ul>
 <li>
 Proficiency in 3D Modeling design, simulation and Manufacturing.
 </li>
 <li>
 Experience with 3D Modeling tools such as CATIA, Creo, NX CAD, SolidWorks, Fusion360, etc.
 </li>
 <li>
 Experience with FEA/CFD simulation tools such as ANSYS, or COMSOL Multiphysics. Ability to conduct heat transfer, stress, strain, vibration, and shock analyses as per industry standards.
 </li>
 <li>
 Expertise in GD&amp;T analysis for system assemblies.
 </li>
 <li>
 Strong grasp of thermodynamics principles, along with the capability to perform heat transfer analysis&mdash;including conduction, convection, and radiation&mdash;to design heat sinks, radiators, and thermal insulation systems.
 </li>
 <li>
 Substantial experience with the integration and interfacing of optical and mechanical systems.
 </li>
 <li>
 Familiarity with the opto-mechanical aspects of laser systems
 </li>
 <li>
 Familiarity with optical design principles, ray tracing, and optical design tools
 </li>
 <li>
 Ability to analyze problems, think critically, and develop effective design optimization.
 </li>
 <li>
 Being adaptable and committed to continuous learning to stay updated on industry trends and advancements.
 </li>
 <li>
 Ability to think outside the box and propose novel ideas contributes to the development of cutting-edge products.
 </li>
 <li>
 Ability to work as part of a multicultural research team with effective oral and written communication skills.
 </li>
 <li>
 Self-motivated and self-directed
 </li>
 </ul>
 
 
 
 
 
 Qualifications
 
 
 
 To qualify for this position, you will need to meet the following requirements:
 
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s /master's degree in mechanical engineering, or related fields.
 </li>
 <li>
 At least 5 years of working experience in an R&amp;D department or industry or similar environment, with a focus on opto-mechanics
 </li>
 <li>
 Good level of English (speaking and writing).
 </li>
 </ul>
 
 
</div>

Senior Opto-Mechanical Engineer

Search 10000+ Optical systems engineer jobs near you this January. New roles added regularly across leading industries. Apply today.