civil engineer Jobs in Abu Dhabi United Arab Emirates

civil engineer

electrical engineer Jobs in Abu Dhabi United Arab Emirates

electrical engineer

planning engineer Jobs in Abu Dhabi United Arab Emirates

planning engineer

mechanical engineer Jobs in Abu Dhabi United Arab Emirates

mechanical engineer

project engineer Jobs in Abu Dhabi United Arab Emirates

project engineer

piping engineer

<div>Title:
Senior Piping Engineer
&quot;Belong, Connect, Grow, with KBR !
The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.
KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.&quot;
Title: Senior Piping Engineer
Location: Abu Dhabi, UAE &mdash; KBR Office
Job Purpose<ul><li>
Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.</li><li>
Single point of contact for Piping deliverables and Activities.</li><li>
Interface with client and other stakeholders for successful execution of the project</li><li>
Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.</li><li>
Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</li></ul>
Key Responsibilities<ul><li>
Engineering design and engineer piping systems, supports, routing, isometrics, stress analysis, and related components.</li><li>
Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li><li>
Perform and supervise piping stress analyses, thermal expansion, pipe routing optimization, and vibration considerations.</li><li>
Ensure compliance with applicable codes and standards and project-specific requirements.</li><li>
Review and approve technical deliverables (isometrics, P&amp;IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li></ul><ul><li>
Development of standard deliverables, various datasheets, and requisition packages related to piping.</li><li>
Experience in Non-metallic Piping Stress Analysis and Procurement. Provide in-depth technical support for material selection involving metallic, GRE, and HDPE piping systems.</li><li>
Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li><li>
Understand the MOC process and employ effective change management throughout the lifecycle of the project</li><li>
Contribute to Lesson Learnt from the Project</li><li>
Report to Department Manager/ Lead Engineer for the project.</li></ul>
Experience<ul><li>
12+ years of experience in Concept, FEED and Detail Engineering and EPCM experience in the Oil &amp; Gas industry.</li><li>
Experience in Middle East clients like ADNOC, BP, BOC, PDO, Total Energies &amp; Qatar Energies others are highly preferred.</li><li>
Familiarity of Onshore and Offshore facilities and carried out Greenfield and Brownfield Projects.</li><li>
Experience in working with multicultural project teams across the various project execution center&rsquo;s</li><li>
Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li></ul>
Qualifications<ul><li>
Master or Bachelor of Engineering in a related field.</li><li>
Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li><li>
Certification related to piping design or stress analysis is advantageous.</li></ul>
Technical Skills<ul><li>
Strong background in piping design, engineering, stress analysis, and support design.</li><li>
Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li><li>
Technical experience to prepare manhours estimation for different types of piping activities &amp; deliverables of different phases of the project like Select phase, FEED &amp; Execution etc.</li><li>
Familiarity with codes, standards, regulations and practices applicable to the design and construction of Various facilities.</li><li>
Hands on knowledge of codes and standards relevant to piping.</li><li>
Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li><li>
Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li><li>
Knowledge of Interdisciplinary Work Processes/Interface/Deliverables</li><li>
Responsible for the training and development of engineers in his/her Team.</li><li>
Adherence to company processes and procedures and handle internal and external project audits.</li><li>
Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li></ul>
Soft Skills<ul><li>
Communication: Clear, concise communication with technical and non-technical stakeholders.</li><li>
Problem Solving: Proactive identification and mitigation of piping-related risks.</li><li>
Project Management: Planning, scheduling, risk management, and deliverable tracking.</li><li>
Influence &amp; Collaboration: Effective collaboration with clients, vendors, and internal teams.</li><li>
Adaptability: Comfort in dynamic project environments and changing technical requirements.</li><li>
Attention to Detail: Rigorous approach to reviews, calculations, and documentation.</li><li>
Safety Mindset: Commitment to health, safety, and environment (HSE) standards.</li><li>
Critical Thinking: Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems</li></ul></div>

Senior Piping Engineer

Aljomaih Energy and Water Company

<div>
 Al Jomaih Energy &amp; Water (AEW) headquartered in Saudi Arabia, is a fast-growing investor, lead developer, and operator of utility and infrastructure projects in various geographical markets such as KSA, GCC, Asia &amp; North Africa, with investments in 6 GW of Conventional and Solar power plants, and around 700,000 m3/day of water.
 
 
 AEW was established in 2007, as a subsidiary of Al Jomaih Holding Company, a leading Saudi conglomerate with a legacy spanning over 80 years, focused on enabling sustainable, social, and economic progress in the Kingdom of Saudi Arabia and beyond.
 
 
 At AEW, our mission is to tackle new technologies, solve complex problems, and leverage our expertise to unlock opportunities in the Power, Renewables &amp; Water Sectors, while driving impact for our stakeholders across the value chain.
 
 
 
 Role Profile: Mechanical/Piping Engineer
 
 
 
 This is a greenfield CCGT project to be constructed with a net power capacity of 2400 MW, together with its ancillary equipment, associated infrastructure and facilities. The Project comprises the Plant and associated Electrical Special Facilities (ESF). The Plant will be located inland at a site situated approximately 50 km north-east of the City of Abu Dhabi.
 
 
 This role offers a unique opportunity to engage in the full lifecycle of the project, from design and engineering to construction and operation, all within a dynamic and innovative environment. This project promises stability and long-term impact.
 
 
 
 Location:
 
 Taweelah, Abu Dhabi, UAE
 
 
 
 Duration:
 
 Approx 3 to 4 months
 
 
 
 Reporting Structure
 
 
 
 Project Manager
 
 
 
 Overview
 
 
 
 The Pipe Engineer will be responsible for overseeing and managing various aspects of piping systems in energy and water projects. The successful candidate will play a crucial role in the planning, design, construction, and maintenance of piping systems, ensuring compliance with industry standards, regulations, and project specifications.
 
 
 
 Your Job Functions (Duties &amp; Responsibilities)
 
 
 
 
 Supervision &amp; Oversight:
 
 
 
 <ul>
 <li>
 Review and monitor EPC Contractor's piping design deliverables (isometrics, general arrangement drawings, stress analysis, material specifications), design elements of gas/steam turbines, HRSG, condensers, pumps, valves, and auxiliary mechanical equipment
 </li>
 <li>
 Ensure design complies with project codes and standards (e.g., ASME, ASTM, EN)
 </li>
 <li>
 Validate technical solutions for pipe supports, routing, and interface with equipment and structures
 
 
 </li>
 </ul>
 
 Construction Monitoring:
 
 
 
 <ul>
 <li>
 Supervise piping fabrication and erection activities on-site
 </li>
 <li>
 Ensure adherence to approved drawings, quality plans, and installation procedures
 </li>
 <li>
 Review contractor's Method Statements and Inspection &amp; Test Plans (ITPs)
 </li>
 <li>
 Participate in inspections and witness testing (e.g., hydrotests, flushing, NDT)
 
 
 </li>
 </ul>
 
 Quality and Safety:
 
 
 
 <ul>
 <li>
 Monitor construction quality; report non-conformances and follow up on corrective actions
 </li>
 <li>
 Enforce safety practices and participate in Toolbox Talks and site safety walks
 
 
 </li>
 </ul>
 
 Progress and Coordination:
 
 
 
 <ul>
 <li>
 Track progress of piping activities; identify and escalate delays or risks
 </li>
 <li>
 Coordinate interfaces between piping systems and other disciplines (civil, mechanical, electrical)
 </li>
 <li>
 Support resolution of site technical queries and construction issues
 
 
 </li>
 </ul>
 
 Documentation and Handover:
 
 
 
 <ul>
 <li>
 Review and comment on as-built documentation, test reports, and turnover packages
 </li>
 <li>
 Ensure proper documentation is maintained for project close-out and commissioning readiness
 
 
 </li>
 </ul>
 
 Reporting:
 
 
 
 <ul>
 <li>
 Prepare weekly progress reports highlighting key risks, issues, and achievements
 </li>
 <li>
 Accept individual responsibility for their own safety as well as share responsibility with their fellow workers and line supervision to look out for their own as well as their co-workers safety
 </li>
 <li>
 Comply with and constructively participate in the Project HSSE activities
 </li>
 <li>
 Work in a safe manner always and contribute to the implementation of the &lsquo;Incident and Injury Free' philosophy
 </li>
 <li>
 Stop any unsafe act/behavior observed and report it to their line supervisor/manager
 </li>
 <li>
 Take reasonable care for the safety of themselves and other personnel who are at the workplace, and who may be affected by any acts or omissions on their part
 </li>
 <li>
 Co-operate with their employer in ensuring that their workplace is as safe and healthy as is reasonably practical
 </li>
 <li>
 Report any hazard or potential hazard in the workplace or any incident, personal injury, accident or near miss that may have occurred during the course of work to the HSSE staff immediately
 </li>
 <li>
 Correctly use, store and maintain PPE issued to them for protection against workplace hazards
 </li>
 <li>
 Follow all verbal or written safe work procedures, practices and directions
 </li>
 <li>
 Observe all warning signs and notices
 </li>
 <li>
 Attend toolbox meetings and all other HSSE meetings as required
 </li>
 <li>
 Attend all scheduled relevant HSSE training courses
 </li>
 <li>
 Comply with work instructions and permit requirements
 
 
 </li>
 </ul>
 
 Requirements
 
 
 
 <ul>
 <li>
 Bachelor's degree in mechanical engineering, Piping Engineering, or a related field
 </li>
 <li>
 5-7 years (min) of proven experience as a Piping Mechanical Engineer, in the Power (CCGT) or EPC projects
 </li>
 <li>
 Strong knowledge of turbine systems, HRSG, BOP systems, cooling water systems, and auxiliary equipment
 </li>
 <li>
 Professional Engineer (PE) license is highly desirable
 </li>
 <li>
 Strong knowledge of piping engineering principles, practices, and standards
 </li>
 <li>
 Proficiency in piping design software and computer-aided design (CAD) tools
 </li>
 <li>
 Excellent project management and communication skills
 </li>
 <li>
 Ability to work effectively in a multidisciplinary team
 </li>
 </ul>
</div>

Mechanical/Piping Engineer

Al Jomaih Energy and Water

<div>Al Jomaih Energy &amp; Water (AEW) headquartered in Saudi Arabia, is a fast-growing investor, lead developer, and operator of utility and infrastructure projects in various geographical markets such as KSA, GCC, Asia &amp; North Africa, with investments in 6 GW of Conventional and Solar power plants, and around 700,000 m3/day of water.
AEW was established in 2007, as a subsidiary of Al Jomaih Holding Company, a leading Saudi conglomerate with a legacy spanning over 80 years, focused on enabling sustainable, social, and economic progress in the Kingdom of Saudi Arabia and beyond.
At AEW, our mission is to tackle new technologies, solve complex problems, and leverage our expertise to unlock opportunities in the Power, Renewables &amp; Water Sectors, while driving impact for our stakeholders across the value chain. 
Role Profile: Mechanical/Piping Engineer
This is a greenfield CCGT project to be constructed with a net power capacity of 2400 MW, together with its ancillary equipment, associated infrastructure and facilities. The Project comprises the Plant and associated Electrical Special Facilities (ESF). The Plant will be located inland at a site situated approximately 50 km north-east of the City of Abu Dhabi.
This role offers a unique opportunity to engage in the full lifecycle of the project, from design and engineering to construction and operation, all within a dynamic and innovative environment. This project promises stability and long-term impact.
Location: Taweelah, Abu Dhabi, UAE
Duration: Approx 3 to 4 months
Reporting Structure
Project Manager
Overview
The Pipe Engineer will be responsible for overseeing and managing various aspects of piping systems in energy and water projects. The successful candidate will play a crucial role in the planning, design, construction, and maintenance of piping systems, ensuring compliance with industry standards, regulations, and project specifications. 
Your Job Functions (Duties &amp; Responsibilities)
Supervision &amp; Oversight:<ul>
<li>
Review and monitor EPC Contractor&rsquo;s piping design deliverables (isometrics, general arrangement drawings, stress analysis, material specifications), design elements of gas/steam turbines, HRSG, condensers, pumps, valves, and auxiliary mechanical equipment.</li>
<li>Ensure design complies with project codes and standards (e.g., ASME, ASTM, EN).</li>
<li>Validate technical solutions for pipe supports, routing, and interface with equipment and structures.</li>
</ul>
Construction Monitoring:<ul>
<li>
Supervise piping fabrication and erection activities on-site.</li>
<li>Ensure adherence to approved drawings, quality plans, and installation procedures.</li>
<li>Review contractor&rsquo;s Method Statements and Inspection &amp; Test Plans (ITPs).</li>
<li>Participate in inspections and witness testing (e.g., hydrotests, flushing, NDT).</li>
</ul>
Quality and Safety:<ul>
<li>
Monitor construction quality; report non-conformances and follow up on corrective actions.</li>
<li>Enforce safety practices and participate in Toolbox Talks and site safety walks.</li>
</ul>
Progress and Coordination:<ul>
<li>
Track progress of piping activities; identify and escalate delays or risks.</li>
<li>Coordinate interfaces between piping systems and other disciplines (civil, mechanical, electrical).</li>
<li>Support resolution of site technical queries and construction issues.</li>
</ul>
Documentation and Handover:<ul>
<li>
Review and comment on as-built documentation, test reports, and turnover packages.</li>
<li>Ensure proper documentation is maintained for project close-out and commissioning readiness.</li>
</ul>
Reporting:<ul>
<li>
Prepare weekly progress reports highlighting key risks, issues, and achievements.</li>
<li>Accept individual responsibility for their own safety as well as share responsibility with their fellow workers and line supervision to look out for their own as well as their co-workers safety</li>
<li>Comply with and constructively participate in the Project HSSE activities</li>
<li>Work in a safe manner always and contribute to the implementation of the &lsquo;Incident and Injury Free&rsquo; philosophy.</li>
<li>Stop any unsafe act/behavior observed and report it to their line supervisor/manager.</li>
<li>Take reasonable care for the safety of themselves and other personnel who are at the workplace, and who may be affected by any acts or omissions on their part.</li>
<li>Co-operate with their employer in ensuring that their workplace is as safe and healthy as is reasonably practical.</li>
<li>Report any hazard or potential hazard in the workplace or any incident, personal injury, accident or near miss that may have occurred during the course of work to the HSSE staff immediately</li>
<li>Correctly use, store and maintain PPE issued to them for protection against workplace hazards</li>
<li>Follow all verbal or written safe work procedures, practices and directions.</li>
<li>Observe all warning signs and notices.</li>
<li>Attend toolbox meetings and all other HSSE meetings as required.</li>
<li>Attend all scheduled relevant HSSE training courses</li>
<li>Comply with work instructions and permit requirements</li>
</ul>
Requirements<ul>
<li>
Bachelor&rsquo;s degree in mechanical engineering, Piping Engineering, or a related field.</li>
<li>5-7 years (min) of proven experience as a Piping Mechanical Engineer, in the Power (CCGT) or EPC projects.</li>
<li>Strong knowledge of turbine systems, HRSG, BOP systems, cooling water systems, and auxiliary equipment.</li>
<li>Professional Engineer (PE) license is highly desirable.</li>
<li>Strong knowledge of piping engineering principles, practices, and standards.</li>
<li>Proficiency in piping design software and computer-aided design (CAD) tools.</li>
<li>Excellent project management and communication skills.</li>
<li>Ability to work effectively in a multidisciplinary team.</li></ul></div>

GCG Engineering Services

<div>Company Description 
Emirates Electrical &amp; Instrumentation Company LLC is a proud member of the Ghobash Group. For almost 20 years, we have made vital contributions to the Oil &amp; Gas sector of the UAE, executing both onshore and offshore projects. Abu Dhabi National Oil Company (ADNOC) is one of our main clients along with Tier 1 and Tier 2 EPC contractors in this sector. We have the expertise to carry out full EPC&amp;M services for electrical and instrumentation works and bring our intrinsic knowledge to measure and automate exploration, production, separation, refining processes, and distribution through our localized services. 
Job Description 
Role Purpose
Lead and manage all piping engineering activities for the offshore project across multiple offshore platforms at Umm Shaif Super Complex USSC. Ensure safe, compliant, and constructible piping design for instrument air, plant air, utilities, and compressor package integration, fully aligned with ADNOC Offshore standards. 
The role involves close coordination with Engineering Subcontractors, Process, Mechanical, Electrical &amp; I&amp;C disciplines, OEMs, vendors, and ADNOC Offshore Operations throughout FEED, EPC, construction, and commissioning phases.
Piping Discipline Technical Authority
Act as the primary technical authority for all piping and layout engineering across the IA/PA upgrade works, ensuring compliance with:<ul><li>
ADNOC Piping Standards (ASME B31.3 / ADNOC CoPs / ADNOC offshore specifications)</li><li>
Project-specific Design Basis &amp; FEED intent</li><li>
Offshore brownfield constraints</li><li>
OEM piping interface requirements (compressor, dryer, receiver packages)</li><li>
Class requirements for offshore structures</li><li>
Provide guidance and approval across the full EPC piping scope.</li></ul>
Package Piping Integration &amp; Vendor Coordination
Lead piping engineering for integrating the following packages:<ul><li>
Instrument Air Compressors</li><li>
Plant Air Compressors</li><li>
Twin Tower Air Dryers</li><li>
IA/PA Air Receivers</li><li>
Interconnecting skid piping (oil, air, condensate, drains)</li></ul>
Responsibilities include:<ul><li>
Reviewing vendor GA drawings, nozzle orientations, connection sizes &amp; elevations</li><li>
Ensuring correct mating flanges, material grades, pressure classes</li><li>
Confirming nozzle loads, alignment and piping flexibility</li><li>
Coordinating 3D model integration of OEM skids</li><li>
Reviewing vendor hook-up drawings and utility tie-ins</li></ul>
Piping Material Engineering &amp; Specifications
Oversee and validate:<ul><li>
Piping classes &amp; MTO compliance (CS/SS/Instrument Air/Plant Air)</li><li>
Pipe supports, clamps, spring hangers (where required)</li><li>
Insulation &amp; painting requirements</li><li>
Pressure rating selection (Class 150/300 for IA/PA network)</li><li>
Pigging and flushing requirements (if applicable)</li><li>
Material substitution proposals from EPC</li></ul>
Brownfield Integration &amp; Tie-In Engineering
Lead piping design for brownfield connections across multiple platforms:<ul><li>
Identify and verify tie-in points on existing IA/PA networks</li><li>
Validate routing feasibility in congested areas</li><li>
Review site survey data, laser scans, and field measurements</li><li>
Ensure safe access &amp; maintenance clearance for new routing</li><li>
Review EPC brownfield method statements (hot work, prefab, cold work)</li><li>
Evaluate need for temporary IA/PA bypass lines during shutdown</li><li>
Produce piping risk register for brownfield modifications.</li></ul>
3D Model Governance &amp; Multi-Discipline Integration
Lead piping model reviews for:<ul><li>
Compressor area layout</li><li>
Dryer skid placement</li><li>
Receiver positioning and supports</li><li>
Routing optimization to avoid clashes</li><li>
Access, operability and maintainability checks</li><li>
Escape route &amp; safety distance compliance</li><li>
Conduct structured 3D model review sessions (30% / 60% / 90%) with EPC, OEM, ADNOC PMC &amp; Ops.</li><li>
Proficient in AVEVA (E3D/PDMS) and SP3D for advanced piping design, 3D modelling, routing, clash detection, pipe support integration, and extraction of isometrics, GA drawings, IFC and MTO deliverables in alignment with ADNOC design standards.</li></ul>
Piping Stress Engineering Oversight
Review and approve stress analysis for:<ul><li>
Compressor suction/discharge piping</li><li>
Dryer inlet/outlet lines</li><li>
Receiver-to-header connections</li><li>
Large-bore pipe stress and support adequacy</li><li>
Thermal expansion cases</li><li>
Vendor nozzle load limitations</li><li>
Validate EPC stress reports and compliance with ASME/API standards.</li></ul>
HSE, Safety, and Integrity Compliance
Provide piping discipline input for:<ul><li>
HAZID, HAZOP, ENVID, SIMOPS reviews, SIL/LOPA (piping-related failures and safeguards)</li><li>
Escape route and congested area analysis</li><li>
Ensure piping meets fireproofing, hazardous area, and process safety requirements.</li></ul>
Coordination with EPC, OEMs &amp; Other Disciplines
Daily coordination with:<ul><li>
EPC Piping, Mechanical, Structural, Electrical, and I&amp;C teams</li><li>
Compressor and Dryer OEM Engineers</li><li>
ADNOC Ops &amp; PMT, 3rd-party survey teams</li></ul>
Review and comment on EPCs:<ul><li>
Piping GAs, Isometrics, Support drawings, Tie-in packages, MTOs, TQs and deviations</li><li>
Ensure timely closure of comments.</li></ul>
QA/QC Oversight for Piping Discipline
Check EPC compliance with:<ul><li>
QCP/ITP requirements for welding, NDT, hydrotesting</li><li>
Piping fabrication drawings</li><li>
Spool numbering, fit-up, and prefabrication quality</li><li>
Offshore lifting, assembly, and installation feasibility</li><li>
Participate in FAT/SAT for piping-related skid components where needed.</li></ul>
Construction &amp; Commissioning Support
Provide OE piping oversight to ensure safe and correct installation:<ul><li>
Assist EPC during offshore piping prefabrication and installation</li><li>
Validate pipe support installation &amp; alignment</li><li>
Review hydrotests packages, charts and reinstatement records</li><li>
Verify line flushing/blowing readiness</li><li>
Provide final piping acceptance for Mechanical Completion (A/B/C punch items)</li><li>
Support IA/PA network pressurization and leak testing</li></ul>
Documentation, Deliverables &amp; Reporting<ul><li>
Review and approve EPC piping deliverables (P&amp;IDs, GAs, Isos, MTOs)</li><li>
Ensure strict compliance with ADNOC numbering systems</li><li>
Maintain discipline comment registers, TQ logs &amp; interface registers</li><li>
Validate as-built piping documents post commissioning</li><li>
Provide weekly piping discipline reports to OE Engineering Manager</li></ul>
Key Deliverables<ul><li>
Approved piping layouts, isometrics, and MTOs</li><li>
Piping stress analysis and support design reports</li><li>
Tie-in lists and brownfield modification packages</li><li>
Vendor interface and piping integration reports</li><li>
As-built piping drawings and documentation</li><li>
Piping discipline inputs for commissioning and handover</li></ul> 

Qualifications 
<ul><li>
Bachelor&rsquo;s Degree in Mechanical / Piping Engineering</li><li>
ADNOC Offshore approval or eligibility is mandatory</li><li>
Chartered Engineer status or equivalent certification is an advantage</li></ul> 

Additional Information 
<ul><li>
Minimum Experience: 15+ Years (Oil &amp; Gas EPC Projects)</li><li>
Offshore Experience: Mandatory (Brownfield Platform Projects Preferred)</li></ul>
Personal Attributes<ul><li>Strong technical leadership and decision-making capability</li><li>Detail-oriented with a strong safety mindset</li><li>Proactive and accountable</li><li>Clear communicator with ADNOC, subcontractors, and vendors</li><li>Capable of working under tight offshore project deadlines</li></ul></div>

Lead Piping Design Engineer [Offshore Project]

<div>Title:
Sr Construction Engineer - Piping (Offshore site 6/3 Rotation
Belong, Connect, Grow, with KBR!
The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise,
Sr Construction Engineer - Piping (Offshore site 6/3 Rotation) 
KBR Abu Dhabi is currently looking to fill a PMC role for Sr Construction Engineer &ndash; Piping for an Offshore project to be based in Abu Dhabi Offshore site 6/3 Rotation.
Profile matching below criteria only will be contacted.
Requirements:<ul><li>
Minimum Overall 15+ years of experience in Oil and Gas industry.</li><li>
Having good experience in Detailed Engineering projects in the Oil &amp; Gas industry.</li><li>
Minimum 5+ years of experience in Offshore projects would be a mandatory requirement.</li><li>
Experience in Offshore Construction Site activities is a prerequisite for the role.</li><li>
Must have worked at least 5 years&rsquo; of experience in similar position for mega oil and gas FEED/ EPC project ( more than US$ 1 Billion)</li><li>
Bachelor&rsquo;s Degree in Engineering is a MUST.</li></ul></div>

Sr Construction Engineer - Piping (Offshore site 6/3 Rotation

Penspen

<div><div>Job Responsibilities:
<ul>
<li>Manage and supervise piping construction activities at site
</li>
<li>Ensure work is executed as per drawings, specifications, and project schedule
</li>
<li>Coordinate with engineering, QA/QC, HSE, and planning teams
</li>
<li>Monitor contractor performance and site progress
</li>
<li>Ensure compliance with HSE and quality standards
</li>
<li>Support offshore piping installation and hook-up activities
</li>
</ul>Requirements:
<ul>
<li>Bachelor&rsquo;s degree in Mechanical Engineering or related field
</li>
<li>15+ years of piping construction experience in oil &amp; gas projects
</li>
<li>Proven offshore project experience
</li>
<li>Strong knowledge of piping systems, standards, and construction practices
</li>
<li>Good coordination and leadership skills</li></ul> 

#LI-SS1</div></div>

Senior Construction Engineer (Piping)

<div>Title:
Senior Engineer Onshore Construction &ndash; Piping (Offshore site 6/3 Rotation - Al Omaira Topside project)
Belong, Connect, Grow, with KBR!
The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise,
KBR Abu Dhabi is currently looking to fill a PMC role for Senior Engineer Onshore Construction - Piping for an Offshore project to be based in Abu Dhabi Offshore site 6/3 Rotation.
Profile matching below criteria only will be contacted.
Requirements:<ul><li>
Minimum Overall 15+ years of experience in Oil and Gas industry.</li><li>
Having good experience in Detailed Engineering projects in the Oil &amp; Gas industry.</li><li>
Minimum 5+ years of experience in Offshore projects would be a mandatory requirement.</li><li>
Experience in Offshore / Onshore Construction Site activities is a prerequisite for the role.</li><li>
Must have worked at least 5 years&rsquo; of experience in similar position for mega oil and gas FEED/ EPC project ( more than US$ 1 Billion).</li><li>
Bachelor&rsquo;s Degree in Engineering is a MUST.</li></ul></div>

Senior Engineer Onshore Construction – Piping (Offshore site 6/3 Rotation - Al Omaira Topside project)

Explore 328+ Piping engineer in Abu Dhabi United Arab Emirates this January. Find roles across top companies and apply now to boost your career.

328 piping engineer jobs IN Abu Dhabi United Arab Emirates

Senior Piping Engineer

Mechanical/Piping Engineer

Mechanical/Piping Engineer

Lead Piping Design Engineer [Offshore Project]

Sr Construction Engineer - Piping (Offshore site 6/3 Rotation

Senior Construction Engineer (Piping)

Senior Engineer Onshore Construction – Piping (Offshore site 6/3 Rotation - Al Omaira Topside project)